Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Delta Control Heavy Duty Relay

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

900 Series DC Deltrol

CONTROLS
900 Series Relay 30 and 50 Amp
Heavy Duty Power Relay
General purpose relay that controls electrical loads
Features
• Class F coil insulation system for 155°C Total Temperature
• Coil Molded in Dupont Rynite® PET for environmental protection
• Rugged construction rivets terminals to base
900-1C
• 900, 900D and 900E are UL and cUL listed
• 900-1C, 900Q and 900R are UL and cUR recognized
Typical Applications
• Motor Control • Control Panel Switching • Spa Controls
Models
900: Fast acting 30 Amp Power Relay
900R 900-1C: Same as 900 with addition of SPDT auxiliary snap switch
rated 10 Amp, 1/4 HP
900Q: Same as 900 with .250” Quick Connect Termination
900D: Same as 900 with addition of blowout magnets for
switching DC loads
900E: Same as 900 with 50 Amp rating with box lug termination
900R: Same as 900 with 50 Amp rating and standard screw
terminals

Contact Data
Configuration Thru DPDT
Materials 5/16” Diameter Silver Cadmium Oxide (Fine Silver available on special order, min. qty. required)
Contact Ratings
Movable Contact Size Pole Configuration UL Ratings
30 Amp or 1 - 1/2 Hp at 120/240 VAC
2 Hp at 240 VAC, 3600 W at 120 or 240 VAC
900 SPST-NC short base (ballast)
900Q SPST-NO short base 30 Amp at 240 VAC, 100,000 (cycle) resistive
SPST-NO-DM short base 20 Amp at 600 VAC
SPST-NC-DB long base 30 Amp at 28 VDC
SPDT short base Same as 900 with addition of auxillary 1/4
900-1C DPST-NO short base HP at 125 or 250 VAC switch
DPST-NC long base
900D DPST-NC short base Same as 900 with additional rating of 20
DPDT long base Amp at 125 VDC
900E 50 Amp at 277 VAC resistive 100,000 cycles,
900R 40 Amp general use (Inductive)
Expected Life Electrical at Rated Load (Min) 100,000 Operations | Mechanical Life 10,000,000 Operations
Dielectric Strength 2200 VRMS, 60 Hz Between Contacts | 2200 VRMS, 60 Hz Between Other Elements
UL Recognized File No. E37066, 900, 900D and 900E are UL and cUL listed. Other versions are UR and
Agency Approvals
cUR recognized (USA and Canadian Recognition)

Rynite® is a registered trademark of DuPont All dimensions in Inches

Specifications subject to change without notice 1 of 4 Rev 10/20/11


©2011 Deltrol Controls - A Division of Deltrol Corp.
2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 4
­ 14.671.6809 | www.deltrol-controls.com‌| sales@deltrol.com
900 Series DC Deltrol
CONTROLS

Coil Data
Nominal Voltage Resistance In Ohms ± 10% Nominal Coil Power
6 VAC .85
12 VAC 2.85
24 VAC 11.5
AC Coils 9.5 VA
120 VAC 295
240 VAC 1170
480 VAC 4860
6 VDC 18
12 VDC 72
DC Coils 24 VDC 290 2W
48 VDC 1150
110 VDC 6050
Coil Voltages AC: Up to 600 Volts/60 Hz | DC: Up to 125 Volts
Coil Treatment Molded Rynite® PET Std. Class F
Insulation Resistance 100 Megohms Minimum
UL Insulation System File No. E74443 S155D 155°C Total Temperature Std. (Covers S105 Class A and S130D Class B Requirements)
Operate Data
AC Volts 85% or Less of Nominal
Pick Up (at 25°C)
DC Volts 75% or Less of Nominal
Operate Time Approx. 30 Milliseconds
Release Time Approx. 30 Milliseconds
Environmental Data
AC: -45° to 80°C @ 30 Amps | AC: -45° to 70°C @ 50 Amps
Operating Ambient
DC - 45° to 115°C @ 30 Amps | DC: -45° to 105°C @ 50 Amps
(25°C Ambient - Continuous Duty)
Coil Temperature Rise AC: 70°C Approx. @ 60Hz - Use at 50 Hz will cause slight increase in Coil Rise
DC: 35°C Approx.
Mechanical Data
Terminals Screw type on all but series 900Q which has Quick Connect .250”
Weight Short Base Versions 8 oz. Approx (227 g.) | Long Base Versions 10 oz. Approx (283 g.)

Specifications subject to change without notice 2 of 4 Rev 10/20/11


©2011 Deltrol Controls - A Division of Deltrol Corp.
2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 4
­ 14.671.6809 | www.deltrol-controls.com‌| sales@deltrol.com
900 Series DC Deltrol
CONTROLS
Dimensional View
Units: Inches [mm]

Specifications subject to change without notice 3 of 4 Rev 10/20/11


©2011 Deltrol Controls - A Division of Deltrol Corp.
2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 4
­ 14.671.6809 | www.deltrol-controls.com‌| sales@deltrol.com
900 Series DC Deltrol
CONTROLS
Ordering Information

Model 900 30 Amp Part Numbers


AC Coils DC Coils
Pole Config. 24 VAC 120 VAC 240 VAC 12 VDC 24 VDC 110 VDC
SPST-NO 20237-82* 20237-83* 20237-84 20333-81 20333-82 20333-84
SPST-NC 20330-82 20330-83 20330-84 20334-81 20334-82 20334-84
SPST-NO-DM 20238-82* 20238-83* 20238-84 20242-81 20242-82 20242-84
SPST-NC-DB 20332-82 20332-83 20332-84 20336-81 20336-82 20336-84
SPDT 20239-82* 20239-83* 20239-84 20243-81* 20243-82* 20243-84
DPST-NO 20240-82* 20240-83* 20240-84* 20244-81* 20244-82* 20244-84
DPST-NC 20331-82 20331-83 20331-84 20335-81 20335-82 20335-84
DPDT 20241-82* 20241-83* 20241-84* 20245-81* 20245-82* 20245-84*
Model 900-1C 30 Amp Part Numbers
DPST-NC 20361-82 20361-83 20361-84 20367-81 20367-82 20367-84
DPST-NO 20248-82 20248-83 20248-84 20249-81 20249-82* 20249-84
DPDT 20246-82 20246-83* 20246-84 20247-81 20247-82 20247-84

(*) Normally Stocked


Non stocked items require a minimum order

Part Number Description


20257-80 OPTIONAL B-5 DUST COVER FOR SERIES 900 RELAY

• Sealed knock-out holes for standard conduit fittings.


• Relay mounts on pre-drilled base.
• Aluminum construction
• Snap action cover release.
• Size: 5” W x 3” H x 4” D

Specifications subject to change without notice 4 of 4 Rev 10/20/11


©2011 Deltrol Controls - A Division of Deltrol Corp.
2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 4
­ 14.671.6809 | www.deltrol-controls.com‌| sales@deltrol.com

You might also like