PLPT5 447ka - en
PLPT5 447ka - en
PLPT5 447ka - en
com
PLPT5 4 47K A
DATASHEET
PLPT5 447KA
Datasheet
Published by ams-OSRAM AG
Tobelbader Strasse 30, 8141 Premstaetten, Austria
PLPT5 447KA
Blue Laser Diode in TO56 Package
Applications
- Entertainment - Projection & Display
- Projection
Features
- Typical emission wavelength: 445 nm
- TO56 package
- High modulation bandwidth
- Multi-mode semiconductor laser
- Efficient radiation source for cw and pulsed operation
- Laser diode isolated against package
- ESD protection diode
- Optical power class: 2 W
Ordering Information
Type Peak output power Ordering Code
typ.
Popt
Maximum Ratings
TC = 25 °C
Parameter Symbol Values
Operation outside these conditions may damage the device. Operation at maximum ratings may influence lifetime.
Characteristics
Popt = 2.0 W; TC = 25 °C
Parameter Symbol Values
Threshold Current
Ith = f (TC)
Dimensional Drawing 7)
Further Information:
Approximate Weight: 310.0 mg
Pin Description
PIN 1 LD Anode
PIN 2 Case
PIN 3 LD Cathode
Tray 7)
Barcode-Product-Label (BPL)
Notes
CLASSNOTSPECIFIED
Subcomponents of this device contain, in addition to other substances, metal filled materials including silver.
Metal filled materials can be affected by environments that contain traces of aggressive substances. There-
fore, we recommend that customers minimize device exposure to aggressive substances during storage,
production, and use. Devices that showed visible discoloration when tested using the described tests above
did show no performance deviations within failure limits during the stated test duration. Respective failure
limits are described in the IEC60810.
Notes
Handling:
Solvents, water, liquids, non-conductive plastics and glues are not allowed near the device, because sol-
vents and other liquids could emerge and damage the product.
a) Electrical operation
OSRAMs laser diodes are designed for maximum performance and reliability. Operating the laser diode
above the maximum rating even for very short periods of time can damage the laser diode or reduce its
lifetime. The laser diode must be operated with a suitable power supply with minimized electrical noise.
The laser diode is very sensitive to electrostatic discharge (ESD). Proper precautions must be taken.
b) Mounting instructions
In order to maintain the lifetime of the laser diode proper heat management is essential. Due to the design
of the laser diode heat is dissipated only through the base plate of the diode‘s body. A proper heat conduct-
ing interconnection between the diodes base plate and the heat sink must be maintained.
For further application related information please visit www.osram-os.com/appnotes
c) Qualifications: Depending on the mode of operation, these devices emit highly concentrated visible light
which can be hazardous to the human eye. Products which incorporate these devices have to follow the
safety precautions found in IEC 60825 “Safety of laser products”.
Disclaimer
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version on our website.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest
sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of
transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we
shall have to invoice you for any costs incurred.
In case buyer – or customer supplied by buyer – considers using our components in product safety devices/
applications or medical devices/applications, buyer and/or customer has to inform our local sales partner
immediately and we and buyer and /or customer will analyze and coordinate the customer-specific request
between us and buyer and/or customer.
Glossary
1)
Operating/Forward current: IF is measured with an internal reproducibility of ±7 % (acc. to GUM with a
coverage factor of k = 3).
2)
Wavelength: The wavelengths are measured with a tolerance of ±1 nm.
3)
Operating/Forward voltage: VF is measured with an internal reproducibility of ±0.05 V (acc. to GUM
with a coverage factor of k = 3).
4)
Forward Voltage: The forward voltages are measured with a tolerance of ±0.1 V.
5)
Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-
es, the typical data or calculated correlations of technical parameters can only reflect statistical figures.
These do not necessarily correspond to the actual parameters of each single product, which could dif-
fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.
because of technical improvements, these typ. data will be changed without any further notice.
6)
Testing temperature: TA = 25°C (unless otherwise specified)
7)
Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and
dimensions are specified in mm.
Revision History
Version Date Change
Published by ams-OSRAM AG
Tobelbader Strasse 30, 8141 Premstaetten, Austria
Phone +43 3136 500-0
ams-osram.com
© All rights reserved
15 | Version 1.0 | 2022-09-29