350W Single Output DC-DC Converter SD-350 series

■ Features :
2:1 wide input range
Protections: Short circuit / Overload / Over voltage / Over temperature
1500VAC I/O isolation
Forced air cooling by built-in DC Fan
100% full load burn-in test
24V and 48V input voltage design refer to LVD
2 years warranty

(for D type only)

SPECIFICATION
MODEL SD-350B SD-350C
DC VOLTAGE 5V 12V 24V 48V 5V 12V 24V 48V
RATED CURRENT 57A 27.5A 14.6A 7.3A 60A 27.5A 14.6A 7.3A
CURRENT RANGE 0 ~ 57A 0 ~ 27.5A 0 ~ 14.6A 0 ~ 7.3A 0 ~ 60A 0 ~ 27.5A 0 ~ 14.6A 0 ~ 7.3A
RATED POWER 285W 330W 350.4W 350.4W 300W 330W 350.4W 350.4W
RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 150mVp-p 200mVp-p 100mVp-p 120mVp-p 150mVp-p 200mVp-p
OUTPUT
VOLTAGE ADJ. RANGE 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC
VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.3% ±0.2% ±0.2% ±0.5% ±0.3% ±0.2% ±0.2%
LOAD REGULATION ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
SETUP, RISE TIME 300ms, 50ms at full load
VOLTAGE RANGE B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~144VDC
EFFICIENCY (Typ.) 74% 80% 80% 84% 76% 81% 81% 82%
INPUT
DC CURRENT (Typ.) 14.4A/24V 16A/24V 17.6A/24V 17.6A/24V 7.6A/48V 8.8A/48V 9.0A/48V 9.0A/48V
INRUSH CURRENT (Typ.) C:45A/48VDC D:45A/96VDC
105 ~ 135% rated output power
OVERLOAD
Protection type : Shut down o/p voltage, re-power on to recover
PROTECTION 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP. -20 ~ +60℃ (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS IEC60950-1 CB approved by TUV (for D type only)
SAFETY & WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
(Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B
EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A
MTBF 209.4K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 215*115*50mm (L*W*H)
PACKING 1.1Kg; 12pcs/14.4Kg/0.92CUFT
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25℃ of ambient temperature.
NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

File Name:SD-350-SPEC 2015-08-06

 350W Single Output DC-DC Converter SD-350 series

■ Features :
2:1 wide input range
Protections: Short circuit / Overload / Over voltage / Over temperature
1500VAC I/O isolation
Forced air cooling by built-in DC Fan
100% full load burn-in test
24V(B) and 48V(C) input voltage design refer to LVD
2 years warranty

(for D type only)

SPECIFICATION
MODEL SD-350D
DC VOLTAGE 5V 12V 24V 48V
RATED CURRENT 60A 29.2A 14.6A 7.3A
CURRENT RANGE 0 ~ 60A 0 ~ 29.2A 0 ~ 14.6A 0 ~ 7.3A
RATED POWER 300W 350.4W 350.4W 350.4W
RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 150mVp-p 200mVp-p
OUTPUT
VOLTAGE ADJ. RANGE 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 43 ~ 53VDC
VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.3% ±0.2% ±0.2%
LOAD REGULATION ±1.0% ±1.0% ±1.0% ±1.0%
SETUP, RISE TIME 300ms, 50ms at full load
VOLTAGE RANGE B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~144VDC
EFFICIENCY (Typ.) 78% 83% 87% 89%
INPUT
DC CURRENT (Typ.) 6A/96V 6A/96V 6A/96V 6A/96V
INRUSH CURRENT (Typ.) C:45A/48VDC D:45A/96VDC
105 ~ 135% rated output power
OVERLOAD
Protection type : Shut down o/p voltage, re-power on to recover
PROTECTION 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP. -20 ~ +60℃ (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS IEC60950-1 CB approved by TUV (for D type only)
SAFETY & WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
(Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B
EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A
MTBF 209.4K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 215*115*50mm (L*W*H)
PACKING 1.1Kg; 12pcs/14.4Kg/0.92CUFT
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25℃ of ambient temperature.
NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

File Name:SD-350-SPEC 2015-08-06

 350W Single Output DC-DC Converter SD-350 series

Mechanical Specification Case No. 912B Unit:mm

117.5
32.5 150
27.5 177.5
19

LED

+V ADJ. 36.7
9
8
7
9.5
135

4-M4 L=5mm

115
95
50
6
5 47.5
4
8.3

50.5
3
6-M3 L=3mm

37.5
32.5
2
1
10
16

15

215
32.5 150
Terminal Pin No. Assignment :
13max. Pin No. Assignment Pin No. Assignment
Air flow 1 DC INPUT V+ 4,5,6 DC OUTPUT V-
50
25
CL

direction 2 DC INPUT V- 7,8,9 DC OUTPUT V+

3 FG

6-M4 L=6mm

Block Diagram fosc : 100KHz

RECTIFIERS POWER RECTIFIERS +V

EMI
I/P & FILTER &
FILTER SWITCHING -V
FILTER FILTER
(ONLY D SERIES)
FAN
FG
O.V.P.

O.L.P. PWM DETECTION

CONTROL CIRCUIT
O.T.P.

Derating Curve Static Characteristics

others 100
100
90
80
80

60 SD-350B,C,D-5 70
LOAD (%)

LOAD (%)

60
40
50
20
40

-20 0 10 20 30 40 50 60 (HORIZONTAL) B:19 24 36

C:36 48 72
D:72 96 144
AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V)

File Name:SD-350-SPEC 2015-08-06