Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    Practice Problems Hydraulics

    Uploaded by

    Angelene Elaco

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Practice Problems Hydraulics

    Uploaded by

    Angelene Elaco
    3 views2 pages

    Original Title

    Practice problems hydraulics

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    3 views2 pages

    Practice Problems Hydraulics

    Uploaded by

    Angelene Elaco

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 2

    Properties Related to Mass and Weight

    2.6 Determine the density and specific weight of methane gas at a pressure of 300 kN/m 3 absolute
    and 60°C.
    2.8 At a temperature of 100°C and an absolute pressure of 5 atmospheres, what is the ratio of the
    density of water to the density of air, ρw / ρa ?
    2.9 Find the total weight of a 10 ft3 tank of oxygen if the oxygen is pressurized to 500 psia, the tank
    itself weighs 150 lbf, and the temperature is 70°F?
    2.10 A 10 m3 oxygen tank is at 15°C and 800 kPa. The valve is opened, and some oxygen is released
    until the pressure in the tank drops to 600 kPa. Calculate the mass of oxygen that has been released
    from the tank if the temperature in the tank does not change during the process.
    2.11 What are the specific weight and density of air at an absolute pressure of 600 kPa and a
    temperature of 50°C?
    Viscosity
    2.18 What is the change in the viscosity and density of water between 10°C and 70°C? What is the
    change in the viscosity and density of air between 10°C and 70°C? Assume standard atmospheric
    pressure (p = 101 kN m2 absolute).
    2.20 Find the dynamic and kinematic viscosities of kerosene, SAE 10W-30 motor oil, and water at a
    temperature of 38°C (100°F).
    2.33 The sliding plate viscometer shown below is used to measure the viscosity of a fluid. The top
    plate is moving to the right with a constant velocity of 10 m s in response to a force of 3 N. The
    bottom plate is stationary. What is the viscosity of the fluid? Assume a linear velocity distribution.
    2.34 The velocity distribution for water (20°C) near a wall is given by u = a(y b)1/6, where a = 10 m/s,
    b= 2 mm, and y is the distance from the wall in mm. Determine the shear stress in the water at y =1
    mm.

    2.37 Suppose that glycerin is flowing (T = 20°C) and that the pressure gradient dp ⁄ dx is -1.6 kN /m 3 .
    What are the velocity and shear stress at a distance of 12 mm from the wall if the
    space B between the walls is 5.0 cm? What are the shear stress and velocity at the wall? The velocity
    distribution for viscous flow between stationary plates is

    You might also like