Contact Information

If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at https://event.asrock.com/tsd.asp

ASRock Incorporation
e-mail: info@asrock.com.tw

ASRock EUROPE B.V.

e-mail: sales@asrock.nl

ASRock America, Inc.

e-mail: sales@asrockamerica.com

Scan the QR code to view more manuals and documents.

Contents

Chapter 1 Introduction 1
1.1 Package Contents 1

1.2 Specifications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 8

1.5 Block Diagram 10

1.6 802.11axe Wi-Fi 6E Module and ASRock WiFi 2.4/5/6 GHz

Antennas 11

Chapter 2 Installation 13
2.1 Installing the CPU 14

2.2 Installing the CPU Fan and Heatsink 17

2.3 Installing Memory Modules (DIMM) 26

2.4 Connecting the Front Panel Header 28

2.5 Installing the Motherboard 29

2.6 Installing SATA Drives 30

2.7 Installing a Graphics Card 32

2.8 Connecting Peripheral Devices 34

2.9 Connecting the Power Connectors 35

2.10 Power On 36

2.11 Jumpers Setup 37

2.12 Onboard Headers and Connectors 38

2.13 Smart Button 51

2.14 Post Status Checker 53

2.15 M.2 SSD Module Installation Guide (M2_1) 54

2.16 M.2 SSD Module Installation Guide (M2_2) 58

 B650M PG Riptide WiFi White

Chapter 1 Introduction
Thank you for purchasing ASRock B650M PG Riptide WiFi White motherboard,
a reliable motherboard produced under ASRock’s consistently stringent quality
control. It delivers excellent performance with robust design conforming to
ASRock’s commitment to quality and endurance.

Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any modi-
fications of this documentation occur, the updated version will be available on ASRock’s
website without further notice. If you require technical support related to this mother-
board, please visit our website for specific information about the model you are using. You
may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock
website http://www.asrock.com.

1.1 Package Contents

• ASRock B650M PG Riptide WiFi White Motherboard (Micro ATX Form Factor)
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 2 x ASRock WiFi 2.4/5/6 GHz Antennas (Optional)
• 2 x Screws for M.2 Sockets (Optional)
• 1 x Standoff for M.2 Socket (Optional)

1
 1.2 Specifications

Platform • Micro ATX Form Factor

• 2oz Copper PCB

CPU • Supports AMD Socket AM5 RyzenTM 7000 Series Processors

Chipset • AMD B650

Memory • Dual Channel DDR5 Memory Technology

• 4 x DDR5 DIMM Slots
• Supports DDR5 non-ECC, un-buffered memory up to
7200+(OC)*
• Max. capacity of system memory: 192GB
• Supports Extreme Memory Profile (XMP) and EXTended
Profiles for Overclocking (EXPO) memory modules
* Please refer to Memory Support List on ASRock's website for
more information. (http://www.asrock.com/)

Expansion CPU:
Slot • 1 x PCIe 4.0 x16 Slot (PCIE1), supports x16 mode*
• 1 x PCIe 4.0 x16 Slot (PCIE4), supports x4 mode*
Chipset:
• 2 x PCIe 3.0 x1 Slots (PCIE2 and PCIE3)*
• 1 x Vertical M.2 Socket (Key E), supports type 2230 WiFi/BT
PCIe WiFi module

* Supports NVMe SSD as boot disks

• Supports AMD CrossFireTM
• 15μ Gold Contact in VGA PCIe Slot (PCIE1)

Graphics • Integrated AMD RDNATM 2 graphics (Actual support may

vary by CPU)
• 1 x HDMI 2.1 TMDS/FRL 8G Compatible, supports HDR,
HDCP 2.3 and max. resolution up to 4K 120Hz
• 1 x DisplayPort 1.4 with DSC (compressed), supports HDCP
2.3 and max. resolution up to 4K 120Hz

2
 B650M PG Riptide WiFi White

Audio • 7.1 CH HD Audio (Realtek ALC897 Audio Codec)

• Nahimic Audio

LAN • 2.5 Gigabit LAN 10/100/1000/2500 Mb/s

• Dragon RTL8125BG
• Supports Phantom Gaming LAN Software
- Smart Auto Adjust Bandwidth Control
- Visual User Friendly UI
- Visual Network Usage Statistics
- Optimized Default Setting for Game, Browser, and
Streaming Modes
- User Customized Priority Control

Wireless • 802.11axe Wi-Fi 6E Module

LAN • Supports IEEE 802.11a/b/g/n/ac/ax/axe
• Supports Dual-Band 2x2 with extended 6GHz band* sup-
port
* Wi-Fi 6E (6GHz band) will be supported by Microsoft® Win-
dows® 11. The availability will depend on the different regula-
tion status of each country and region. It will be activated (for
supported countries) through Windows Update and software
updates once available.
* A 6GHz compatible router is required for 6E functionality.
• 2 antennas to support 2 (Transmit) x 2 (Receive) diversity
technology
• Supports Bluetooth + High speed class II
• Supports MU-MIMO

USB • 1 x USB 3.2 Gen2 Type-C (Rear)

• 1 x USB 3.2 Gen2 Type-A (Rear)
• 1 x USB 3.2 Gen1 Type-C (Front)
• 6 x USB 3.2 Gen1 (2 Rear, 4 Front)
• 8 x USB 2.0 (4 Rear, 4 Front)
* All USB ports support ESD Protection

3
 Rear Panel • 2 x Antenna Ports
I/O • 1 x HDMI Port
• 1 x DisplayPort 1.4
• 1 x USB 3.2 Gen2 Type-A Port (10 Gb/s) (ReDriver)
• 1 x USB 3.2 Gen2 Type-C Port (10 Gb/s) (ReDriver)
• 2 x USB 3.2 Gen1 Ports (USB32_23 are Lightning Gaming
Ports.)
• 4 x USB 2.0 Ports
• 1 x RJ-45 LAN Port
• 1 x BIOS Flashback Button
• HD Audio Jacks: Line in / Front Speaker / Microphone

Storage CPU:
• 1 x Blazing M.2 Socket (M2_1, Key M), supports type
2260/2280 PCIe Gen5x4 (128 Gb/s) mode*
Chipset:
• 1 x Hyper M.2 Socket (M2_2, Key M), supports type
2260/2280 PCIe Gen4x4 (64 Gb/s) mode*
• 4 x SATA3 6.0 Gb/s Connectors

* Supports NVMe SSD as boot disks

* Supports ASRock U.2 Kit

RAID • Supports RAID 0, RAID 1 and RAID 10 for SATA storage

devices
• Supports RAID 0, RAID 1 and RAID 10 for M.2 NVMe stor-
age devices*
* Requires additional M.2 NVMe expansion cards to support
RAID 10

Connector • 1 x SPI TPM Header

• 1 x Power LED and Speaker Header
• 1 x RGB LED Header*
• 3 x Addressable LED Headers**
• 1 x CPU Fan Connector (4-pin)***
• 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)****

4
 B650M PG Riptide WiFi White

• 3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan

Speed Control)*****
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector
• 1 x 4 pin 12V Power Connector
• 1 x Front Panel Audio Connector
• 1 x Thunderbolt AIC Connector (5-pin) (Supports ASRock
Thunderbolt 4 AIC Card)
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
• 2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports)
• 1 x Front Panel Type C USB 3.2 Gen1 Header
* Supports in total up to 12V/3A, 36W LED Strip
** Support in total up to 5V/3A, 15W LED Strip
*** CPU_FAN1 supports the fan power up to 1A (12W).
**** CPU_FAN2/WP supports the fan power up to 2A (24W).
***** CHA_FAN1~3/WP support the fan power up to 2A (24W).
***** CPU_FAN2/WP and CHA_FAN1~3/WP can auto detect
if 3-pin or 4-pin fan is in use.

BIOS
• AMI UEFI Legal BIOS with GUI support
Feature

OS • Microsoft® Windows® 10 64-bit / 11 64-bit

Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using third-party
overclocking tools. Overclocking may affect your system’s stability, or even cause damage to
the components and devices of your system. It should be done at your own risk and expense.
We are not responsible for possible damage caused by overclocking.

5
 1.3 Motherboard Layout

1 2 3 4 5
DP_1

CPU_FAN1

ATX12V1 ATX12V2

ADDR_LED3
6

B650M PG R I P T I D E W i F i
1

RGB_LED1
HDMI1

7
1

BIOS
_FB1

DDR5_A1 (64 bit, 288-pin module)

DDR5_B1 (64 bit, 288-pin module)

DDR5_B2 (64 bit, 288-pin module)

DDR5_A2 (64 bit, 288-pin module)

ATXPWR1
USB 3.2 Gen2
T:USB32_1
B: USB32_TC1

8
USB_2
USB 2.0

USB_4
USB 2.0
USB_1
USB 2.0

USB_3
USB 2.0

USB 3.2 Gen1 Top:

USB32_TC2
T: USB32_2
RJ-45
B: USB32_3 9

SATA3_1
M2_WIFI_2 10

USB32_4_5
M2_1
MIC IN
Bottom:

LINE IN
Top:
FRONT
Center:

SATA3_2
11
CPU_FAN2
1
29 /WP
12
PCIE1
SPI_TPM_J1 13
1

LAN
AMD
PCIE2 BIOS
ROM
B650
SATA3_3
SATA3_4

14

PCIE3
M2_2

RoHS

AUDIO
PCIE4
CODEC
CHA_FAN3
CHA_FAN1 CHA_FAN2 USB_7_8 USB_5_6 /WP
HD_AUDIO1 1 USB32_6_7 CLR SPK_PLED1
DRAM
BOOT

TB1 PLED PWRBTN

VGA

CPU

ADDR_LED2 ADDR_LED1 /WP /WP CMOS1

1
1 1
1
1 1 HDLED RESET
15
1 1 1
PANEL1

28 27 26 25 24 23 22 21 20 19 18 17 16

6
 B650M PG Riptide WiFi White

No. Description
1 8 pin 12V Power Connector (ATX12V1)
2 4 pin 12V Power Connector (ATX12V2)
3 CPU Fan Connector (CPU_FAN1)
4 2 x 288-pin DDR5 DIMM Slots (DDR5_A1, DDR5_B1)
5 2 x 288-pin DDR5 DIMM Slots (DDR5_A2, DDR5_B2)
6 Addressable LED Header (ADDR_LED3)
7 RGB LED Header (RGB_LED1)
8 ATX Power Connector (ATXPWR1)
9 Front Panel Type C USB 3.2 Gen1 Header (USB32_TC2)
10 SATA3 Connector (SATA3_1)
11 SATA3 Connector (SATA3_2)
12 USB 3.2 Gen1 Header (USB32_4_5)
13 SPI TPM Header (SPI_TPM_J1)
14 SATA3 Connectors (SATA3_4)(Upper), (SATA3_3)(Lower)
15 System Panel Header (PANEL1)
16 Power LED and Speaker Header (SPK_PLED1)
17 Clear CMOS Jumper (CLRCMOS1)
18 USB 3.2 Gen1 Header (USB32_6_7)
19 Post Status Checker (PSC)
20 Chassis/Water Pump Fan Connector (CHA_FAN3/WP)
21 USB 2.0 Header (USB_5_6)
22 USB 2.0 Header (USB_7_8)
23 Chassis/Water Pump Fan Connector (CHA_FAN2/WP)
24 Chassis/Water Pump Fan Connector (CHA_FAN1/WP)
25 Addressable LED Header (ADDR_LED1)
26 Addressable LED Header (ADDR_LED2)
27 5-pin Thunderbolt AIC Connector (TB1)
28 Front Panel Audio Header (HD_AUDIO1)
29 CPU/Water Pump Fan Connector (CPU_FAN2/WP)

7
 1.4 I/O Panel
2
1 3

12 11 10 8 7 6 5 4
9

No. Description No. Description

1 2.5G LAN RJ-45 Port* 8 USB 3.2 Gen2 Type-A Port
2 Line In (Light Blue)** (USB32_1)
3 Front Speaker (Lime)** 9 USB 3.2 Gen2 Type-C Port
4 Microphone (Pink)** (USB32_TC1)
5 Antenna Ports 10 BIOS Flashback Button
6 USB 3.2 Gen1 Type-A Ports 11 HDMI Port
(USB32_23)*** 12 DisplayPort 1.4
7 USB 2.0 Ports (USB_1234)

8
 B650M PG Riptide WiFi White

*There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
100Mbps/1Gbps
Blinking Data Activity Orange
connection
On Link Green 2.5Gbps connection

** Function of the Audio Ports in 7.1-channel Configuration:

Port Function
Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out

*** USB32_23 are the Lightning Gaming Ports.

9
10
DDR5 Slot x2 Channel A x16 Gen4 PCIe x16 Gen4 Slot

DDR5 Slot x2 Channel B x4 Gen5 M.2(PCIe x4)

HDMI Port DP0

x4 Gen4 PCIe x4 Slot
AMD AM5
Audio Codec ALC897 3 AZ(HD Audio) Processor
1.5 Block Diagram

LGA1718 DP1 Displayport

Flash ROM SPI

SIO NCT6796D-S eSPI

10Gb/s ReDriver Rear USB 3.2 Gen2 Type C

5Gb/s 10Gb/s ReDriver Rear USB 3.2 Gen2 Type A

Rear USB 3.2 Gen1 1 port

PCIe x4 Gen4 BUS

USB2.0 Hub x4 Gen4 M.2(PCIe x4 Gen4)

Front USB 2.0 4 port 480Mb/s
GL852

Front USB 3.2 Gen1 Type C 5Gb/s

Front USB 3.2 Gen1 4 port 5Gb/s 1st x1 Realtek RTL8125B 2.5G LAN
AMD PROM21
Rear USB 3.2 Gen1 1 port 5Gb/s Chipset x1 Key E WiFi

Rear USB 2.0 4 port 480Mb/s

x1 PCIe x1 Slot

SATA 4 port SATA 6Gb x1 PCIe x1 Slot

 B650M PG Riptide WiFi White

1.6 802.11axe Wi-Fi 6E Module and ASRock WiFi 2.4/5/6 GHz

Antennas
802.11axe Wi-Fi 6E + BT Module
This motherboard comes with an exclusive 802.11 a/b/g/n/ac/ax/axe Wi-Fi 6E +
BT module that offers support for 802.11 a/b/g/n/ac/ax/axe Wi-Fi 6E connectivity
standards and Bluetooth. Wi-Fi 6E + BT module is an easy-to-use wireless local area
network (WLAN) adapter to support Wi-Fi 6E + BT. Bluetooth standard features
Smart Ready technology that adds a whole new class of functionality into the mobile
devices. BT also includes Low Energy Technology and ensures extraordinary low
power consumption for PCs.

* The transmission speed may vary according to the environment.

* Wi-Fi 6E (6GHz band) will be supported by Microsoft® Windows® 11. The availability
will depend on the different regulation status of each country and region. It will be
activated (for supported countries) through Windows Update and software updates
once available.
* A 6GHz compatible router is required for 6E functionality.

11
 WiFi Antennas Installation Guide

Step 1
Prepare the WiFi 2.4/5/6 GHz Antennas that
come with the package.

Step 2
Connect the two WiFi 2.4/5/6 GHz Antennas
to the antenna connectors. Turn the antenna
clockwise until it is securely connected.

Step 3

Set the WiFi 2.4/5/6 GHz Antenna as shown in

the illustration.
*You may need to adjust the direction of
the antenna for a stronger signal.

12
 B650M PG Riptide WiFi White

Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard,
study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

13
 2.1 Installing the CPU

1. Before you insert the 1718-Pin CPU into the socket, please check if the PnP cap is on the
socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not
force to insert the CPU into the socket if above situation is found. Otherwise, the CPU
will be seriously damaged.
2. Unplug all power cables before installing the CPU.

Tutorial Video

Turn your CPU to the correct orientation before opening

the CPU socket cover.

14
 B650M PG Riptide WiFi White

1 2

3 4

Carefully place the CPU in as flat as

possible. Do not drop it.

15
 5 6

Make sure the CPU is aligned with the

socket before locking it into place.

Make sure the black cover plate

is always in place until it pops off
when closing the socket lever.

Please save the cover if the processor is removed. The cover must be placed if you wish to
return the motherboard for after service.

16
 B650M PG Riptide WiFi White

2.2 Installing the CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a larger
heatsink and cooling fan to dissipate heat. You also need to spray thermal grease
between the CPU and the heatsink to improve heat dissipation. Make sure that the
CPU and the heatsink are securely fastened and in good contact with each other.

Please turn off the power or remove the power cord before changing a CPU or heatsink.

Installing the CPU Cooler (Type 1)

17
18
4
3

CP
U_
FA
N1
 B650M PG Riptide WiFi White

Installing the CPU Cooler (Type 2)

19
20
4
3

CP
U_
FA
N1
 B650M PG Riptide WiFi White

N 1
FA
U_
CP
D1

+12V RG
B_LE

*The illustrations shown here are for reference purposes only and may not exactly match
the model you purchase.

21
 Installing the CPU Cooler (Type 3)

22
 B650M PG Riptide WiFi White

23
24
5

CP
U_
FA
N1
 B650M PG Riptide WiFi White

N1
_FA
U
CP
D1

+12V
B_LE
RG

or U_
CP
FA
N1

D1
B_LE
RG

2
B_1_
US

Please note that only one cable should be used at a time in this step.
If you select RGB_LED1, please install ASRock utility "ASRock Polychrome SYNC".
If you select USB connector, please install AMD utility "SR3 Settings Software".

*The illustrations shown here are for reference purposes only and may not exactly match
the model you purchase.

25
 2.3 Installing Memory Modules (DIMM)

This motherboard provides four 288-pin DDR5 (Double Data Rate 5) DIMM slots,
and supports Dual Channel Memory Technology.

1. For dual channel configuration, you always need to install identical (the same brand,
speed, size and chip-type) DDR5 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three memory
module installed.
3. It is not allowed to install a DDR, DDR2 , DDR3 or DDR4 memory module into a DDR5
slot; otherwise, this motherboard and DIMM may be damaged.
4. The DIMM only fits in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

Recommended Memory Configuration

1 DIMM
A1 A2 B1 B2
V

2 DIMMs
A1 A2 B1 B2
V V

4 DIMMs
A1 A2 B1 B2
V V V V

The first boot may take some time.

Please be patient and refer to the following table for booting time.
*It may vary by different setups.

Memory 1st boot after clear CMOS

2 x 16GB 90 sec
2 x 32GB 150 sec
4 x 16GB 170 sec
4 x 32GB 315 sec

26
 B650M PG Riptide WiFi White

27
 2.4 Connecting the Front Panel Header

:
6
(5
: ('
32 '
/
'
+
/( 

6:
('

7
'

6(
/
(5

5(
:

(5
32

:
32

2
RESET SW
HDD LED

3$1(/

System Panel Header Front Panel Wires

10 9

Power SW (-) RESET SW (+)

B D
Power SW (+) RESET SW (-)

Power LED (-) HDD LED (-)

A C
Power LED (+) HDD LED (+) A B C D
2 1
PANEL1

28
 B650M PG Riptide WiFi White

2.5 Installing the Motherboard

B650M PG R I P T I D E W i F i

29
 2.6 Installing SATA Drives

Optical Drive

SATA Drive

SATA Data Cable

30
 B650M PG Riptide WiFi White

SATA Power Connector

SATA Data Connector

31
 2.7 Installing a Graphics Card

CLICK!

32
 B650M PG Riptide WiFi White

Expansion Slots (PCIe Slots)

There are 4 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is switched off
or the power cord is unplugged. Please read the documentation of the expansion card and
make necessary hardware settings for the card before you start the installation.

PCIe slots:

PCIE1 (PCIe 4.0 x16 slot) is used for PCIe x16 lane width graphics cards.
PCIE2 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
PCIE3 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
PCIE4 (PCIe 4.0 x16 slot) is used for PCIe x4 lane width graphics cards.

PCIe Slot Configurations

PCIE1 PCIE4

Single Graphics Card Gen4x16 N/A

Two Graphics Cards in

Gen4x16 Gen4x4
CrossFireTM Mode

For a better thermal environment, please connect a chassis fan to the motherboard’s
chassis fan connector (CHA_FAN1~3/WP) when using multiple graphics cards.

33
 2.8 Connecting Peripheral Devices

34
 B650M PG Riptide WiFi White

2.9 Connecting the Power Connectors

$7;9 $7;3:5

35
 2.10 Power On

1 3

36
 B650M PG Riptide WiFi White

2.11 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.

Clear CMOS Jumper

(CLRCMOS1) (see p.6, No. 17)
CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system setup
parameters. To clear and reset the system parameters to default setup, please
turn off the computer and unplug the power cord, then use a jumper cap to short
the pins on CLRCMOS1 for 3 seconds. Please remember to remove the jumper
cap after clearing the CMOS. If you need to clear the CMOS when you just finish
updating the BIOS, you must boot up the system first, and then shut it down
before you do the clear-CMOS action.
B650M PG R I P T I D E W i F i

CLRCMOS1

2-pin Jumper

Short: Clear CMOS

Open: Default

37
 2.12 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.

System Panel Header

(9-pin PANEL1) (see p.6, No. 15)
Connect the power button, reset button and system status indicator on the chassis
to this header according to the pin assignments below. Note the positive and
negative pins before connecting the cables.
B650M PG R I P T I D E W i F i

PANEL1
PLED+
PLED-
PWRBTN#
GND

1
GND
RESET#
GND
HDLED-
HDLED+

PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way to turn
off your system using the power button.

RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to restart the
computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when the
system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The
LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on when the
hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists of power
button, reset button, power LED, hard drive activity LED, speaker and etc. When connect-
ing your chassis front panel module to this header, make sure the wire assignments and the
pin assignments are matched correctly.

38
 B650M PG Riptide WiFi White

Power LED and Speaker Header

(7-pin SPK_PLED1) (see p.6, No. 16)
Please connect the chassis power LED and the chassis speaker to this header.

B650M PG R I P T I D E W i F i

SPK_PLED1

SPEAKER
DUMMY
DUMMY
+5V

PLED+
PLED+
PLED-

Serial ATA3 Connectors

Vertical:
(SATA3_1) (see p.6, No. 10)
(SATA3_2) (see p.6, No. 11)
Right Angle:
(SATA3_3) (see p.6, No. 14)(Lower)
(SATA3_4) (see p.6, No. 14)(Upper)
These four SATA3 connectors support SATA data cables for internal storage
devices with up to 6.0 Gb/s data transfer rate.
SATA3_1
B650M PG R I P T I D E W i F i

SATA3_2
SATA3_4

SATA3_3

39
 USB 2.0 Headers
(9-pin USB_5_6) (see p.6, No. 21)
(9-pin USB_7_8) (see p.6, No. 22)
There are two headers on this motherboard. Each USB 2.0 header can support two
ports.

B650M PG R I P T I D E W i F i

USB_5_6
USB_PWR
P-
P+
GND
DUMMY

1
GND
P+
P-
USB_PWR

USB_7_8
USB_PWR
P-
P+
GND
DUMMY

1
GND
P+
P-
USB_PWR

40
 B650M PG Riptide WiFi White

USB 3.2 Gen1 Headers

(19-pin USB32_4_5) (see p.6, No. 12)
(19-pin USB32_6_7) (see p.6, No. 18)
There are two headers on this motherboard. Each USB 3.2 Gen1 header can
support two ports.
B650M PG R I P T I D E W i F i

USB32_4_5
Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1

USB32_6_7
IntA_P_D+
IntA_P_D-
GND
IntA_P_SSTX+
IntA_P_SSTX-
GND
IntA_P_SSRX+
IntA_P_SSRX-
Vbus

1
Vbus
IntA_P_SSRX-
IntA_P_SSRX+
GND
IntA_P_SSTX-
IntA_P_SSTX+
GND
IntA_P_D-
IntA_P_D+
ID

41
 Front Panel Type C USB 3.2 Gen1 Header
(20-pin USB32_TC2) (see p.6, No. 9)
There is one Front Panel Type C USB 3.2 Gen1 Header on this motherboard. This
header is used for connecting a USB 3.2 Gen1 module for additional USB 3.2 Gen1
ports.

B650M PG R I P T I D E W i F i

USB32_TC2

USB Type-C Cable

Front Panel Audio Header

(9-pin HD_AUDIO1) (see p.6, No. 28)
This header is for connecting audio devices to the front audio panel.

HD_AUDIO1
B650M PG R I P T I D E W i F i

GND
PRESENCE#
MIC_RET
OUT_RET

1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L

High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup-
port HDA to function correctly. Please follow the instructions in our manual and chassis
manual to install your system.

42
 B650M PG Riptide WiFi White

Chassis/Water Pump Fan Connectors

(4-pin CHA_FAN1/WP) (see p.6, No. 24)
(4-pin CHA_FAN2/WP) (see p.6, No. 23)
(4-pin CHA_FAN3/WP) (see p.6, No. 20)
This motherboard provides three 4-Pin water cooling chassis fan connectors. If
you plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3.
B650M PG R I P T I D E W i F i

CHA_FAN3/WP
GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL

1 2 3 4

CHA_FAN2/WP
GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL

CHA_FAN1/WP 1 2 3 4

GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL

1 2 3 4

43
 CPU Fan Connector
(4-pin CPU_FAN1) (see p.6, No. 3)
This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to
connect a 3-Pin CPU fan, please connect it to Pin 1-3.

B650M PG R I P T I D E W i F i

CPU_FAN1
4 3 2 1

GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL

CPU/Water Pump Fan Connector

(4-pin CPU_FAN2/WP) (see p.6, No. 29)
This motherboard provides a 4-Pin water cooling CPU fan connector. If you plan
to connect a 3-Pin CPU water cooler fan, please connect it to Pin 1-3.
B650M PG R I P T I D E W i F i

CPU_FAN2/WP
1 GND
2 FAN_VOLTAGE
3 CPU_FAN_SPEED
FAN_SPEED_CONTROL
4

44
 B650M PG Riptide WiFi White

ATX Power Connector

(24-pin ATXPWR1) (see p.6, No. 8)
This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX
power supply, please plug it along Pin 1 and Pin 13.

B650M PG R I P T I D E W i F i

ATXPWR1

12 24

1 13

ATX 12V Power Connector

(8-pin ATX12V1) (see p.6, No. 1)
This motherboard provides a 8-pin ATX 12V power connector. To use a 4-pin
ATX power supply, please plug it along Pin 1 and Pin 5.
*Warning: Please make sure that the power cable connected is for the CPU and
not the graphics card. Do not plug the PCIe power cable to this
connector.
B650M PG R I P T I D E W i F i

ATX12V1
8 5

4 1

45
 ATX 12V Power Connector
(4-pin ATX12V2) (see p.6, No. 2)
Please connect an ATX 12V power supply to this connector.
*The power supply plug fits into this connector in only one orientation.
*Connecting an ATX 12V 4-pin cable to ATX12V2 is optional.
*For advanced overclocking we suggest using this connector together with
ATX12V1.
B650M PG R I P T I D E W i F i

ATX12V2

SPI TPM Header

(13-pin SPI_TPM_J1) (see p.6, No. 13)
This connector supports SPI Trusted Platform Module (TPM) system, which can securely
store keys, digital certificates, passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity.

SPI_TPM_J1
B650M PG R I P T I D E W i F i

SPI_DQ3
SPI_PWR
Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ

SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2

46
 B650M PG Riptide WiFi White

Thunderbolt AIC Connector

(5-pin TB1) (see p.6, No. 27)
Please connect a ThunderboltTM add-in card (AIC) to the Thunderbolt AIC connector via
the GPIO cable.
*Please install the ThunderboltTM AIC card to PCIE4 (default slot).
*For the Thunderbolt compatibility and limitation, please visit www.asrock.com.
B650M PG R I P T I D E W i F i

1 TB1

47
 RGB LED Header
(4-pin RGB_LED1) (see p.6, No. 7)
This RGB header is used to connect RGB LED extension cable which allow users to choose
from various LED lighting effects.
Caution: Never install the RGB LED cable in the wrong orientation; otherwise, the
cable may be damaged.

B650M PG R I P T I D E W i F i

RGB_LED1
B
R
G
+12V
1

Connect your RGB LED strip to the RGB LED

Header (RGB_LED1) on the motherboard.

1 B
R
G
12V

1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.

1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports standard 5050 RGB LED strip (12V/G/R/B), with a
maximum power rating of 3A (12V) and length within 2 meters.

48
 B650M PG Riptide WiFi White

Addressable LED Headers

(3-pin ADDR_LED1) (see p.6, No. 25)
(3-pin ADDR_LED2) (see p.6, No. 26)
(3-pin ADDR_LED3) (see p.6, No. 6)
These headers are used to connect Addressable LED extension cables which allow users to
choose from various LED lighting effects.
Caution: Never install the Addressable LED cable in the wrong orientation; otherwise,
the cable may be damaged.
ADDR_LED3
B650M PG R I P T I D E W i F i

ADDR_LED1
1

GND
DO_ADDR
VOUT

ADDR_LED2
1

GND
DO_ADDR
VOUT

Connect your Addressable RGB LED strips

to the Addressable LED Headers (ADDR_
LED1 / ADDR_LED2 / ADDR_LED3) on
the motherboard.

49
 1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be
damaged.
2. Before installing or removing your RGB LED cable, please power off your system and
unplug the power cord from the power supply. Failure to do so may cause damages to
motherboard components.

1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports WS2812B addressable RGB LED strip (5V/Data/
GND), with a maximum power rating of 3A (5V) and length within 2 meters.

50
 B650M PG Riptide WiFi White

2.13 Smart Button

The motherboard has a smart button: BIOS Flashback Button, allowing users to
flash the BIOS.

BIOS Flashback Button

(BIOS_FB1) (see p.8, No. 9)
BIOS Flashback Button allows users to flash the BIOS.
B650M PG R I P T I D E W i F i

BIOS_FB1

USB BIOS Flashback port

51
 ASRock BIOS Flashback feature allows you to update BIOS without powering on the system, even
without CPU.

Before using the BIOS Flashback function, please suspend BitLocker and any encryption
or security relying on the TPM. Make sure that you have already stored and backup-ed
the recovery key. If the recovery key is missing while encryption is active, the data will stay
encrypted and the system will not boot into the operating system. It is recommended to dis-
able fTPM before updating the BIOS. Otherwise an unpredictable failure may occur.

To use the USB BIOS Flashback function, Please follow the steps below.
1. Download the latest BIOS file from ASRock's website : http://www.asrock.com.
2. Copy the BIOS file to your USB flash drive. Please make sure the file system of
your USB flash drive must be FAT32.
3. Extract BIOS file from the zip file.
4. Rename the file to “creative.rom” and save it to the root directory of X: USB flash drive.
5. Plug the 24 pin power connector to the motherboard. Then turn on the power supply's AC
switch.
*There is no need to power on the system.
6. Then plug your USB drive to the USB BIOS Flashback port.
7. Press the BIOS Flashback Switch for about three seconds. Then the LED starts to blink.
8. Wait until the LED stops blinking, indicating that BIOS flashing has been completed.
*If the LED light turns solid green, this means that the BIOS Flashback is not
operating properly. Please make sure that you plug the USB drive to the USB BIOS Flashback
port.
**If the LED does not light up at all then please disconnect power from the system and remove/
disconnect the CMOS battery from the motherboard for several minutes. Reconnect power
and battery and try again.

52
 B650M PG Riptide WiFi White

2.14 Post Status Checker

Post Status Checker (PSC) diagnoses the computer when users power on the
machine. It emits a red light to indicate whether the CPU, memory, VGA or
storage is dysfunctional. The lights go off if the four mentioned above are function-
ing normally.

B650M PG R I P T I D E W i F i

BOOT
VGA
DRAM
CPU

Tutorial Video

53
 2.15 M.2 SSD Module Installation Guide (M2_1)
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The Blazing M.2 Socket (M2_1, Key M) supports type 2260/2280 PCIe Gen5x4 (128
Gb/s) mode.

Installing the M.2 SSD Module

Step 1

Prepare a M.2 SSD module.

2 Step 2
1
Depending on the PCB type and
length of your M.2 SSD module, find
the corresponding nut location to be
used.

B A

No. 1 2
Nut Location A B
PCB Length 6cm 8cm
Module Type Type 2260 Type 2280

54
 B650M PG Riptide WiFi White

Step 3

Before installing a M.2 SSD

2
1 module, please loosen the screws to
remove the M.2 heatsink.
1 *Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.

Step 4

Peel off the yellow protective film on

the nut A. Prepare the M.2 standoff
that comes with the package, and
hand tighten it into the nut A. Skip
B A
Step 4 if your M.2 SSD module is
Type 2280.

Step 5

Align and gently insert the M.2 SSD

module into the M.2 slot. Please
be aware that the M.2 SSD module
only fits in one orientation.

B A

B A 20o

55
 Step 6

Tighten the screw with a screwdriver

to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
B NUT2 NUT1
Skip Step 6 if your M.2 SSD module is
Type 2280.

Step 7

Before securing the M.2 heatsink,

make sure to align the notch on
the SSD to the standoff on the
motherboard if you use a Type 2280
SSD module; otherwise, the SSD
module may be damaged.

Correct Installation:
The SSD's PCB is in proper place, and
the M.2 heatsink can be screwed in.

Incorrect Installation:
The SSD's PCB sits between M.2 heatsink
and standoff. Do not continue.

56
 B650M PG Riptide WiFi White

Step 8

Tighten the screws with a screwdriver

1
3 to secure the module (if your M.2
SSD module is Type 2280) and M.2
2 heatsink into place in the order
shown. Tighten screw opposite the
M.2 connector first (2), and then
tighten the one next to the M.2
connector (3).
*Please do not overtighten the screw
as this might damage the module and
M.2 heatsink.

For the latest updates of M.2 SSD module support list, please visit our website for details:
http://www.asrock.com

57
 2.16 M.2 SSD Module Installation Guide (M2_2)
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The Hyper M.2 Socket (M2_2, Key M), supports type 2260/2280 PCIe Gen4x4 (64
Gb/s) mode.

Installing the M.2 SSD Module

Step 1

Prepare a M.2 SSD module and the

screw.

2 Step 2
1
Depending on the PCB type and
length of your M.2 SSD module, find
the corresponding nut location to be
used.

B A

No. 1 2
Nut Location A B
PCB Length 6cm 8cm
Module Type Type 2260 Type 2280

58
 B650M PG Riptide WiFi White

Step 3

Move the standoff based on the

module type and length.
The standoff is placed at the nut
B A
location B by default. Skip Step 3 and
4 and go straight to Step 5 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.

Step 4

Peel off the yellow protective film on

the nut to be used. Hand tighten the
B A standoff into the desired nut location
on the motherboard.

Step 5

Align and gently insert the M.2 SSD

module into the M.2 slot. Please
be aware that the M.2 SSD module
only fits in one orientation.
B A

B A 20o

Step 6

Tighten the screw with a screwdriver

to secure the module into place.
Please do not overtighten the screw
B NUT2 NUT1
as this might damage the module.

For the latest updates of M.2 SSD module support list, please visit our website for details:
http://www.asrock.com 59
Version 1.0
Published July 2024

Copyright©2024 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.

Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
 FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Button Battery Safety Notice

WARNING
• INGESTION HAZARD: This product contains a button cell or
coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal
Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN
• Seek immediate medical attention if a battery is suspected to
be swallowed or inserted inside any part of the body.
- Remove and immediately recycle or dispose of used batteries according to local
regulations and keep away from children. Do NOT dispose of batteries in household
trash or incinerate.
- Even used batteries may cause severe injury or death.
- Call a local poison control center for treatment information.
- Battery type: CR2032
- Battery voltage: 3V
- Non-rechargeable batteries are not to be recharged.
- Do not force discharge, recharge, disassemble, heat above (manufacturer's specified
temperature rating) or incinerate. Doing so may result in injury due to venting, leakage
or explosion resulting in chemical burns.
- This product contains an irreplaceable battery.
- This icon indicates that a swallowed button battery can cause serious injury or death. 
Please keep batteries out of sight or reach of children.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

CALIFORNIA, USA ONLY

WARNING: Cancer and Reproductive Harm

www.P65Warnings.ca.gov

CE Conformity

ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related Directives. Full text of EU declaration of
conformity is available at: http://www.asrock.com
ASRock follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASRock product is in line with global
environmental regulations. In addition, ASRock disclose the relevant information based
on regulation requirements.
Please refer to https://www.asrock.com/general/about.asp?cat=Responsibility for informa-
tion disclosure based on regulation requirements ASRock is complied with.

UKCA Conformity

ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related UKCA Directives. Full text of UKCA decla-
ration of conformity is available at: http://www.asrock.com
Consumer Limited Warranty - Australia
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)

WARNING
THIS PRODUCT CONTAINS A BUTTOON BATTERY
If swallowed, a button battery can cause serious injury or death.
Please keep batteries out of sight or reach of children.

Proper Disposal

DO NOT throw the motherboard in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.

Class B ITE

Trademark Information
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
European Community Radio Equipment Directive Compliance
Statement
This device complies with directive 2014/53/EU issued by the Commision of the
European Community. This equipment complies with EU radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Operations in the 5.15-5.35/6GHz band are restricted to indoor usage only.

Radio Frequency Bands and Maximum Power Levels

• Features : Wi-Fi 6E, BT, Wi-Fi 7
• Frequency Range : 2.4 GHz: 2400-2485MHz; 5 GHz: 5150-5350MHz, 5470-5725MHz,
5725-5850MHz; 6 GHz: 5955-6415MHz
• Max Power Level : 2.4 GHz: 20dBm; 5 GHz: 23dBm; 6 GHz: 23dBm

Compliance Statement of Innovation, Science and Economic

Development Canada (ISED)
This device complies with with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation
of the device. Operation in the band 5150-5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite systems.
CAN ICES-003(B)/NMB-003(B)

NCC 無線設備警告聲明
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合
法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法
通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學
及醫療用電波輻射性電機設備之干擾。