Contact Information

If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at https://event.asrock.com/tsd.asp

ASRock Incorporation
e-mail: info@asrock.com.tw

ASRock EUROPE B.V.

e-mail: sales@asrock.nl

ASRock America, Inc.

e-mail: sales@asrockamerica.com

Scan the QR code to view more manuals and documents.

Contents

Chapter 1 Introduction 1
1.1 Package Contents 1

1.2 Specifications 2

1.3 Motherboard Layout 5

1.4 I/O Panel 7

1.5 Block Diagram 8

Chapter 2 Installation 9
2.1 Installing Memory Module (DIMM) 10

2.2 Connecting the Front Panel Header 12

2.3 Installing the I/O Panel Shield 13

2.4 Installing the Motherboard 14

2.5 Installing SATA Drives 15

2.6 Installing a Graphics Card 17

2.7 Connecting Peripheral Devices 19

2.8 Connecting the Power Connectors 20

2.9 Power On 21

2.10 Jumpers Setup 22

2.11 Onboard Headers and Connectors 23

2.12 Post Status Checker 31

2.13 Intel® CNVi (Integrated WiFi/BT) Installation Guide 32

2.14 M.2 SSD Module Installation Guide (M2_1) 34

 N100M

Chapter 1 Introduction
Thank you for purchasing ASRock N100M motherboard, a reliable motherboard
produced under ASRock’s consistently stringent quality control. It delivers excellent
performance with robust design conforming to ASRock’s commitment to quality
and endurance.

Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any modi-
fications of this documentation occur, the updated version will be available on ASRock’s
website without further notice. If you require technical support related to this mother-
board, please visit our website for specific information about the model you are using. You
may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock
website http://www.asrock.com.

1.1 Package Contents

• ASRock N100M Motherboard (Micro ATX Form Factor)
• ASRock N100M User Manual
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 2 x Screws for M.2 Sockets (Optional)
• 1 x I/O Panel Shield

1
 1.2 Specifications

Platform • Micro ATX Form Factor

• Solid Capacitor design

CPU • Intel® Quad-Core Processor N100 (up to 3.4 GHz)

• Supports Intel® Turbo Boost Technology

Memory • 1 x DDR4 DIMM Slot

• Supports DDR4 non-ECC, un-buffered memory up to 3200*
* Please refer to Memory Support List on ASRock's website for
more information. (http://www.asrock.com/)
• Supports ECC UDIMM memory modules (operate in non-
ECC mode)
• Max. capacity of system memory: 32GB

Expansion • 1 x PCIe 3.0 x16 Slot (PCIE1), supports x2 mode*

Slot • 1 x PCIe 3.0 x1 Slot (PCIE2)*
• 1 x M.2 Socket (Key E), supports type 2230 Intel® CNVio
(Integrated WiFi/BT)**

* Supports NVMe SSD as boot disks

** M.2 PCI Express module is not supported

Graphics • Integrated Intel® UHD Graphics: 24 EUs inside (Up to

750MHz)
• Three graphics output options: D-Sub, HDMI and
DisplayPort 1.4
• 1 x HDMI 2.1 TMDS Compatible, supports HDCP 2.2 and
max. resolution up to 4K 60Hz
• 1 x DisplayPort 1.4 with DSC (compressed), supports HDCP
2.2 and max. resolution up to 4K 60Hz
• 1 x D-Sub, supports max. resolution up to Full HD
(1920x1080) 60Hz

Audio • 7.1 CH HD Audio (Realtek ALC897 Audio Codec)

2
 N100M

LAN • Gigabit LAN 10/100/1000 Mb/s

• Realtek 8111H

USB • 1 x USB 3.2 Gen2 Type-C (Rear)

• 4 x USB 3.2 Gen1 (2 Rear, 2 Front)
• 8 x USB 2.0 (4 Rear, 4 Front)
* All USB ports support ESD Protection

Rear Panel • 2 x Antenna Mounting Points

I/O • 1 x PS/2 Mouse/Keyboard Port
• 1 x D-Sub Port
• 1 x HDMI Port
• 1 x DisplayPort 1.4
• 1 x USB 3.2 Gen2 Type-C Port (10 Gb/s)
• 2 x USB 3.2 Gen1 Ports
• 4 x USB 2.0 Ports
• 1 x RJ-45 LAN Port
• HD Audio Jacks: Line in / Front Speaker / Microphone

Storage • 1 x M.2 Socket (M2_1, Key M), supports type

2242/2260/2280 PCIe Gen3x2 (16 Gb/s) mode*
• 2 x SATA3 6.0 Gb/s Connectors

* Supports NVMe SSD as boot disks

Connector • 1 x SPI TPM Header

• 1 x Chassis Intrusion and Speaker Header
• 2 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan
Speed Control)*
• 1 x 24 pin ATX Power Connector
• 1 x Front Panel Audio Connector
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
• 1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports)
* CHA_FAN1~2/WP support the fan power up to 2A (24W).

3
 BIOS • AMI UEFI Legal BIOS with GUI support
Feature

OS • Microsoft® Windows® 10 64-bit / 11 64-bit

Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using third-party
overclocking tools. Overclocking may affect your system’s stability, or even cause damage to
the components and devices of your system. It should be done at your own risk and expense.
We are not responsible for possible damage caused by overclocking.

4
 N100M

1.3 Motherboard Layout

1 2 3

CHA_FAN1/WP

M2_WIFI1
BIOS RoHS
Keyboard

B: USB_2
T: USB_1
USB2.0

ROM
/Mouse

PS2

SPI_TPM_J1
4

SATA3_0
1

USB2.0
Top:
T: USB_3

SATA3_1
B: USB_4 RJ-45 LAN
5

DDR4_A1 (64 bit, 288-pin module)

N100M
HDMI1

VGA1

ATXPWR1
DP1

6
USB32_TC1
USB 3.2 Gen2

USB 3.2 Gen1

T: USB32_2
B: USB32_1 M2_1
LINE IN
Top:
MIC IN
Bottom:

FRONT
Center:

PCIE1

CHA_FAN2/WP
CMOS
Battery 7
AUDIO VGA
CODEC BOOT
DRAM
CPU
8

PCIE2
USB32_34 PANEL1
HD_AUDIO1 USB_56 USB_78 SPK_CI1
CLRMOS1 PLED PWRBTN
1
1
1 1 1 1 1
HDLED RESET

15 14 13 12 11 10 9

5
 No. Description
1 Chassis/Water Pump Fan Connector (CHA_FAN1/WP)
2 SPI TPM Header (SPI_TPM_J1)
3 288-pin DDR4 DIMM Slot (DDR4_A1)
4 SATA3 Connector (SATA3_0)
5 SATA3 Connector (SATA3_1)
6 ATX Power Connector (ATXPWR1)
7 Chassis/Water Pump Fan Connector (CHA_FAN2/WP)
8 Post Status Checker (PSC)
9 System Panel Header (PANEL1)
10 Chassis Intrusion and Speaker Header (SPK_CI1)
11 USB 2.0 Header (USB_78)
12 USB 2.0 Header (USB_56)
13 USB 3.2 Gen1 Header (USB32_34)
14 Clear CMOS Jumper (CLRMOS1)
15 Front Panel Audio Header (HD_AUDIO1)

6
 N100M

1.4 I/O Panel

4
1 2 3 5

12 11 10 9 8 7 6

No. Description No. Description

1 USB 2.0 Ports (USB_12) 7 USB 3.2 Gen1 Type-A Ports (USB32_12)
2 LAN RJ-45 Port* 8 USB 3.2 Gen2 Type-C Port (USB32_TC1)
3 D-Sub Port 9 DisplayPort 1.4
4 Line In (Light Blue)** 10 HDMI Port
5 Front Speaker (Lime)** 11 USB 2.0 Ports (USB_34)
6 Microphone (Pink)** 12 PS/2 Mouse/Keyboard Port

* There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

** Function of the Audio Ports in 7.1-channel Configuration:

Port Function
Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out

7
8
D-SUB DDIA
Channel A DDR4 Slot x1

HDMI DDIB Alder Lake-N

TCP0 Rear USB 3.2 Gen2 Type C

Display Port TCP1

OPI
1.5 Block Diagram

Front USB 3.2 Gen1

Type A 2 ports 5Gb/s
ASM1074 USB HUB 5Gb/s Gen3 x2 PCIe x2 Slot (PCIE1)
Rear USB 3.2 Gen1 5Gb/s
Type A 2 ports
Gen3 x1 PCIe x1 Slot (PCIE2)

Gen3 x2 M.2 KEY M (M2_1)

Front USB 2.0
480Mb/s GL850 USB HUB 480Mb/s Gen3 x1
Type A 4 ports RTL8111H GbE LAN
Alder Point N
PCH CNVio M.2 KEY E
Rear USB 2.0
Type A 4 ports 480Mb/s
AZ(HD Audio) ALC897 (3 jack Audio)

SATA 6Gb SATA3_0

SATA 6Gb SATA3_1

Flash ROM 128Mb SPI

eSPI

FAN x2 KB/MS
SIO NCT6796D
H/W Monitor
 N100M

Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard,
study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

9
 2.1 Installing Memory Module (DIMM)
This motherboard provides a 288-pin DDR4 (Double Data Rate 4) DIMM slot.

1. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.
2. The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.

10
 N100M

11
 2.2 Connecting the Front Panel Header

:
6
(5
: ('
32 '
/
'
+
/( 

6:
('

7
'

6(
/
(5

5(
:

(5
32

:
32

2
RESET SW
HDD LED

3$1(/

System Panel Header Front Panel Wires

10 9

Power SW (-) RESET SW (+)

B D
Power SW (+) RESET SW (-)

Power LED (-) HDD LED (-)

A C
Power LED (+) HDD LED (+) A B C D
2 1
PANEL1

12
 N100M

2.3 Installing the I/O Panel Shield

13
 2.4 Installing the Motherboard

N100M

14
 N100M

2.5 Installing SATA Drives

Optical Drive

SATA Drive

SATA Data Cable

15
 3

SATA Power Connector

SATA Data Connector

16
 N100M

2.6 Installing a Graphics Card

CLICK!

17
 Expansion Slots (PCIe Slots)
There are 2 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is switched off
or the power cord is unplugged. Please read the documentation of the expansion card and
make necessary hardware settings for the card before you start the installation.

PCIe slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCIe x2 lane width graphics cards.
PCIE2 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.

18
 N100M

2.7 Connecting Peripheral Devices

19
 2.8 Connecting the Power Connectors

$7;9 $7;3:5

20
 N100M

2.9 Power On

1 3

21
 2.10 Jumpers Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.

Clear CMOS Jumper

(CLRMOS1) (see p.6, No. 14)
CLRMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system setup
parameters. To clear and reset the system parameters to default setup, please turn
off the computer and unplug the power cord, then use a jumper cap to short the
pins on CLRMOS1 for 3 seconds. Please remember to remove the jumper cap after
clearing the CMOS. If you need to clear the CMOS when you just finish updating
the BIOS, you must boot up the system first, and then shut it down before you do
the clear-CMOS action.

CLRMOS1
N100M

2-pin Jumper

Short: Clear CMOS

Open: Default

22
 N100M

2.11 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.

System Panel Header

(9-pin PANEL1) (see p.6, No. 9)
Connect the power button, reset button and system status indicator on the chassis
to this header according to the pin assignments below. Note the positive and
negative pins before connecting the cables.

PANEL1
PLED+
PLED-
PWRBTN#
N100M

GND

1
GND
RESET#
GND
HDLED-
HDLED+

PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way to turn
off your system using the power button.

RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to restart the
computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when the
system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The
LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on when the
hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists of power
button, reset button, power LED, hard drive activity LED, speaker and etc. When connect-
ing your chassis front panel module to this header, make sure the wire assignments and the
pin assignments are matched correctly.

23
 Chassis Intrusion and Speaker Header
(7-pin SPK_CI1) (see p.6, No. 10)
Please connect the chassis intrusion and the chassis speaker to this header.

SPK_CI1
N100M SPEAKER
DUMMY
DUMMY
+5V

SIGNAL
GND
DUMMY

Serial ATA3 Connectors

Vertical:
(SATA3_0) (see p.6, No. 4)
(SATA3_1) (see p.6, No. 5)
These two SATA3 connectors support SATA data cables for internal storage
devices with up to 6.0 Gb/s data transfer rate.
SATA3_1 SATA3_0
N100M

24
 N100M

USB 2.0 Headers

(9-pin USB_56) (see p.6, No. 12)
(9-pin USB_78) (see p.6, No. 11)
There are two headers on this motherboard. Each USB 2.0 header can support two
ports.

N100M

USB_78
USB_PWR
P-
P+
GND
DUMMY

1
GND
P+
P-
USB_PWR

USB_56
USB_PWR
P-
P+
GND
DUMMY

1
GND
P+
P-
USB_PWR

25
 USB 3.2 Gen1 Header
(19-pin USB32_34) (see p.6, No. 13)
There is one header on this motherboard. This USB 3.2 Gen1 header can support
two ports.

USB32_34
ID
N100M
IntA_P_D +
IntA_P_D -
GN D
IntA_P_SSTX+
IntA_P_SSTX-
GN D
IntA_P_SSRX +
IntA_P_SSRX -
Vbu s

Vbu s
IntA_P_SSRX -
IntA_P_SSRX +
GN D
IntA_P_SSTX-
IntA_P_SSTX+
GN D
IntA_P_D -
IntA_P_D +

26
 N100M

Front Panel Audio Header

(9-pin HD_AUDIO1) (see p.6, No. 15)
This header is for connecting audio devices to the front audio panel.

HD_AUDIO1
N100M

GND
PRESENCE#
MIC_RET
OUT_RET

1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L

High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup-
port HDA to function correctly. Please follow the instructions in our manual and chassis
manual to install your system.

27
 Chassis/Water Pump Fan Connectors
(4-pin CHA_FAN1/WP) (see p.6, No. 1)
(4-pin CHA_FAN2/WP) (see p.6, No. 7)
This motherboard provides two 4-Pin water cooling chassis fan connectors. If you
plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3.

CHA_FAN1/WP
N100M

GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL

1 2 3 4

CHA_FAN2/WP
GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL

1 2 3 4

28
 N100M

ATX Power Connector

(24-pin ATXPWR1) (see p.6, No. 6)
This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX
power supply, please plug it along Pin 1 and Pin 13.

ATXPWR1
N100M

12 24

1 13

29
 SPI TPM Header
(13-pin SPI_TPM_J1) (see p.6, No. 2)
This connector supports SPI Trusted Platform Module (TPM) system, which can securely
store keys, digital certificates, passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity.

SPI_TPM_J1
SPI_DQ3
SPI_PWR
N100M

Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ

SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2

30
 N100M

2.12 Post Status Checker

Post Status Checker (PSC) diagnoses the computer when users power on the
machine. It emits a red light to indicate whether the CPU, memory, VGA or
storage is dysfunctional. The lights go off if the four mentioned above are function-
ing normally.

VGA
BOOT
N100M

DRAM
CPU

31
 2.13 Intel® CNVi (Integrated WiFi/BT) Installation Guide
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The M.2 Socket (Key E) supports type 2230 Intel® CNVi (Integrated WiFi/BT).
* M.2 PCI Express module is not supported

Before you install Intel® Integrated Connectivity (CNVi) module, be sure to turn off the AC
power.

Installing the WiFi/BT module or Intel® CNVi (Integrated WiFi/BT)

Step 1

Prepare a type 2230 Intel® CNVi

(Integrated WiFi/BT) and the screw.

Step 2

Find the nut location to be used.

PCB Length: 3cm

Module Type: Type2230

32
 N100M

Step 3

Gently insert the Intel® CNVi

(Integrated WiFi/BT) into the M.2
slot. Please be aware that the module
only fits in one orientation.
A

A 20o

Step 4

Tighten the screw with a screwdriver

to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
A

33
 2.14 M.2 SSD Module Installation Guide (M2_1)
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The M.2 Socket (M2_1, Key M) supports type 2242/2260/2280 PCIe Gen3x2 (16
Gb/s) mode.

Installing the M.2 SSD Module

Step 1

Prepare a M.2 SSD module and the

screw.

3
Step 2
2
Depending on the PCB type and
length of your M.2 SSD module, find
the corresponding nut location to be
used.
1

C B A

No. 1 2 3
Nut Location A B C
PCB Length 4.2cm 6cm 8cm
Module Type Type2242 Type2260 Type 2280

34
 N100M

Step 3

Move the standoff based on the

module type and length.
The standoff is placed at the nut
location C by default. Skip Step 3
C B A
and 4 and go straight to Step 5 if you
are going to use the default nut.
Otherwise, release the standoff by
hand.

Step 4

Peel off the yellow protective film on

the nut to be used. Hand tighten the
standoff into the desired nut location
C B A
on the motherboard.

Step 5

Align and gently insert the M.2 SSD

module into the M.2 slot. Please be
aware that the M.2 SSD module only
fits in one orientation.
C B A

C B A 20o

Step 6

Tighten the screw with a screwdriver

to secure the module into place.
Please do not overtighten the screw
C NUT2 NUT1
as this might damage the module.

For the latest updates of M.2 SSD module support list, please visit our website for details:
http://www.asrock.com
35
Version 1.0
Published March 2023

Copyright©2023 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.

Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
 INTEL END USER SOFTWARE LICENSE AGREEMENT
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software
only in its unmodified and binary form, (with the accompanying documentation, the
“Software”) for Licensee’s personal use only, and not commercial use, in connection with
Intel-based products for which the Software has been provided, subject to the following
conditions:
(a) Licensee may not disclose, distribute or transfer any part of the Software, and You agree
to prevent unauthorized copying of the Software.
(b) Licensee may not reverse engineer, decompile, or disassemble the Software.
(c) Licensee may not sublicense the Software.
(d) The Software may contain the software and other intellectual property of third party
suppliers, some of which may be identified in, and licensed in accordance with, an enclosed
license.txt file or other text or file.
(e) Intel has no obligation to provide any support, technical assistance or updates for the
Software.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software
remains with Intel or its licensors or suppliers. The Software is copyrighted and protected
by the laws of the United States and other countries, and international treaty provisions.
Licensee may not remove any copyright notices from the Software. Except as otherwise
expressly provided above, Intel grants no express or implied right under Intel patents,
copyrights, trademarks, or other intellectual property rights. Transfer of the license termi-
nates Licensee’s right to use the Software.
DISCLAIMER OF WARRANTY. The Software is provided “AS IS” without warranty of
any kind, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PUR-
POSE.
LIMITATION OF LIABILITY. NEITHER INTEL NOR ITS LICENSORS OR SUPPLIERS
WILL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF
BUSINESS, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAG-
ES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN
IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
LICENSE TO USE COMMENTS AND SUGGESTIONS. This Agreement does NOT
obligate Licensee to provide Intel with comments or suggestions regarding the Software.
However, if Licensee provides Intel with comments or suggestions for the modification,
correction, improvement or enhancement of (a) the Software or (b) Intel products or
processes that work with the Software, Licensee grants to Intel a non-exclusive, worldwide,
perpetual, irrevocable, transferable, royalty-free license, with the right to sublicense, under
Licensee’s intellectual property rights, to incorporate or otherwise utilize those comments
and suggestions.
TERMINATION OF THIS LICENSE. Intel or the sublicensor may terminate this license
at any time if Licensee is in breach of any of its terms or conditions. Upon termination,
Licensee will immediately destroy or return to Intel all copies of the Software.
THIRD PARTY BENEFICIARY. Intel is an intended beneficiary of the End User License
Agreement and has the right to enforce all of its terms.
U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as
defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial
computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent
with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide
the Software to the U.S. Government. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95054.
EXPORT LAWS. Licensee agrees that neither Licensee nor Licensee’s subsidiaries will
export/re-export the Software, directly or indirectly, to any country for which the U.S.
Department of Commerce or any other agency or department of the U.S. Government
or the foreign government from where it is shipping requires an export license, or other
governmental approval, without first obtaining any such required license or approval. In
the event the Software is exported from the U.S.A. or re-exported from a foreign destina-
tion by Licensee, Licensee will ensure that the distribution and export/re-export or import
of the Software complies with all laws, regulations, orders, or other restrictions of the U.S.
Export Administration Regulations and the appropriate foreign government.
APPLICABLE LAWS. This Agreement and any dispute arising out of or relating to it will
be governed by the laws of the U.S.A. and Delaware, without regard to conflict of laws
principles. The Parties to this Agreement exclude the application of the United Nations
Convention on Contracts for the International Sale of Goods (1980). The state and federal
courts sitting in Delaware, U.S.A. will have exclusive jurisdiction over any dispute arising
out of or relating to this Agreement. The Parties consent to personal jurisdiction and venue
in those courts. A Party that obtains a judgment against the other Party in the courts iden-
tified in this section may enforce that judgment in any court that has jurisdiction over the
Parties.
Licensee’s specific rights may vary from country to country.
 WARNING
THIS PRODUCT CONTAINS A BUTTOON BATTERY
If swallowed, a button battery can cause serious injury or death.
Please keep batteries out of sight or reach of children.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)

ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related UKCA Directives. Full text of UKCA decla-
ration of conformity is available at: http://www.asrock.com

ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related Directives. Full text of EU declaration of
conformity is available at: http://www.asrock.com
ASRock follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASRock product is in line with global
environmental regulations. In addition, ASRock disclose the relevant information based
on regulation requirements.
Please refer to https://www.asrock.com/general/about.asp?cat=Responsibility for informa-
tion disclosure based on regulation requirements ASRock is complied with.

DO NOT throw the motherboard in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.