B360 Pro4

Version 1.
0
Published March 2018
Copyright©2018 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com

AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI™ and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specifications 2
1.3 Motherboard Layout 7
1.4 I/O Panel 9
Chapter 2 Installation 11
2.1 Installing the CPU 12
2.2 Installing the CPU Fan and Heatsink 15
2.3 Installing Memory Modules (DIMM) 16
2.4 Expansion Slots (PCI Express Slots) 18
2.5 Jumpers Setup 19
2.6 Onboard Headers and Connectors 20
2.7 CrossFireX TM and Quad CrossFireX TM Operation Guide 25
2.7.1 Installing Two CrossFireX TM-Ready Graphics Cards 25
2.7.2 Driver Installation and Setup 27
2.8 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT)

Installation Guide 28
2.9 M.2_SSD (NGFF) Module Installation Guide (M2_1) 30
2.10 M.2_SSD (NGFF) Module Installation Guide (M2_2) 35
Chapter 3 Software and Utilities Operation 39

3.1 Installing Drivers 39
3.2 A-Tuning 40
3.2.1 Installing A-Tuning 40
3.2.2 Using A-Tuning 40
3.3 ASRock Live Update & APP Shop 43
3.3.1 UI Overview 43
3.3.2 Apps 44
3.3.3 BIOS & Drivers 47
3.3.4 Setting 48
Chapter 4 UEFI SETUP UTILITY 49

4.1 Introduction 49
4.2 EZ Mode 50
4.3 Advanced Mode 51
4.3.1 UEFI Menu Bar 51
4.3.2 Navigation Keys 52
4.4 Main Screen 53
4.5 OC Tweaker Screen 54
4.6 Advanced Screen 64
4.6.1 CPU Configuration 65
4.6.2 Chipset Configuration 67
4.6.3 Storage Configuration 70
4.6.4 Intel® Thunderbolt 71
4.6.5 Super IO Configuration 73
4.6.6 ACPI Configuration 74
4.6.7 USB Configuration 75
4.6.8 Trusted Computing 76

4.7 Tools 77
4.8 Hardware Health Event Monitoring Screen 79
4.9 Security Screen 82
4.10 Boot Screen 83
4.11 Exit Screen 86

B360 Pro4
Chapter 1 Introduction
Thank you for purchasing ASRock B360 Pro4 motherboard, a reliable motherboard
produced under ASRock’s consistently stringent quality control. It delivers excellent
performance with robust design conforming to ASRock’s commitment to quality
and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the

motherboard and step-by-step installation guides. Chapter 3 contains the operation
guide of the software and utilities. Chapter 4 contains the configuration guide of
the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any
modifications of this documentation occur, the updated version will be available on
ASRock’s website without further notice. If you require technical support related to
this motherboard, please visit our website for specific information about the model
you are using. You may find the latest VGA cards and CPU support list on ASRock’s
website as well. ASRock website http://www.asrock.com.
1.1 Package Contents

• ASRock B360 Pro4 Motherboard (ATX Form Factor)
• ASRock B360 Pro4 Quick Installation Guide
• ASRock B360 Pro4 Support CD
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x I/O Panel Shield
• 3 x Screws for M.2 Sockets (Optional)
English
1
1.2 Specifications
Platform • ATX Form Factor

• Solid Capacitor design
CPU • Supports 8th Generation Intel® CoreTM Processors (Socket

1151)
• Digi Power design
• 10 Power Phase design
• Supports Intel® Turbo Boost 2.0 Technology
Chipset • Intel® B360
Memory • Dual Channel DDR4 Memory Technology

• 4 x DDR4 DIMM Slots
• Supports DDR4 2666/2400/2133 non-ECC, un-buffered
memory
• Supports ECC UDIMM memory modules (operate in non-
ECC mode)
• Max. capacity of system memory: 64GB
• Supports Intel® Extreme Memory Profile (XMP) 2.0
• 15μ Gold Contact in DIMM Slots
Expansion • 2 x PCI Express 3.0 x16 Slots (PCIE2/PCIE4: single at x16

Slot (PCIE2); dual at x16 (PCIE2) / x4 (PCIE4))
* If PCIE3 or PCIE5 is occupied, PCIE4 will downgrade to x2
mode.
* Supports NVMe SSD as boot disks
• 3 x PCI Express 3.0 x1 Slots (Flexible PCIe)
• Supports AMD Quad CrossFireXTM and CrossFireXTM
• 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT module
and Intel® CNVi (Integrated WiFi/BT)
Graphics * Intel® UHD Graphics Built-in Visuals and the VGA outputs
can be supported only with processors which are GPU
English
integrated.
2
B360 Pro4
• Supports Intel® UHD Graphics Built-in Visuals : Intel®

Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD
Technology, Intel® InsiderTM, Intel® UHD Graphics
• DirectX 12
• HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit,
HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (Decode
only), MPEG2, MJPEG, VC-1 (Decode only)
• Three graphics output options: D-Sub, DVI-D and HDMI
• Supports Triple Monitor
• Supports HDMI with max. resolution up to 4K x 2K
(4096x2160) @ 30Hz
• Supports DVI-D with max. resolution up to 1920x1200 @
60Hz
• Supports D-Sub with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI Port
(Compliant HDMI monitor is required)
• Supports HDCP with DVI-D and HDMI Ports
• Supports 4K Ultra HD (UHD) playback with HDMI Port
Audio • 7.1 CH HD Audio with Content Protection (Realtek ALC892

Audio Codec)
* To configure 7.1 CH HD Audio, it is required to use an HD
front panel audio module and enable the multi-channel audio
feature through the audio driver.
• Premium Blu-ray Audio support
• Supports Surge Protection
• ELNA Audio Caps
LAN • Gigabit LAN 10/100/1000 Mb/s

• Giga PHY Intel® I219V
• Supports Wake-On-LAN
• Supports Lightning/ESD Protection
• Supports Energy Efficient Ethernet 802.3az
English
• Supports PXE
3
Rear Panel • 2 x Antenna Ports
I/O • 1 x PS/2 Mouse/Keyboard Port
• 1 x D-Sub Port
• 1 x DVI-D Port
• 1 x HDMI Port
• 2 x USB 2.0 Ports (Supports ESD Protection)
• 1 x USB 3.1 Gen2 Type-A Port (10 Gb/s) (Supports ESD
Protection)
• 1 x USB 3.1 Gen2 Type-C Port (10 Gb/s) (Supports ESD
Protection)
• 2 x USB 3.1 Gen1 Ports (Supports ESD Protection)
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Line in / Front Speaker / Microphone
Storage • 6 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

Hot Plug*
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_5 will
be disabled.
* If M2_2 is occupied by a SATA-type M.2 device, SATA3_0 will
be disabled.
• 1 x Ultra M.2 Socket (M2_1), supports M Key type
2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module and M.2
PCI Express module up to Gen3 x4 (32 Gb/s)**
• 1 x M.2 Socket (M2_2), supports M Key type
2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module
and M.2 PCI Express module up to Gen3 x2 (16 Gb/s)**
** Supports Intel® OptaneTM Technology (M2_1 only)
** Supports NVMe SSD as boot disks
** Supports ASRock U.2 Kit
Connector • 1 x COM Port Header

• 1 x TPM Header
• 1 x Power LED and Speaker Header
• 1 x CPU Fan Connector (4-pin)
* The CPU Fan Connector supports the CPU fan of maximum
English
1A (12W) fan power.
4
B360 Pro4
• 3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan

Speed Control)
* The Chassis/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
* CHA_FAN1/WP, CHA_FAN2/WP and CHA_FAN3/WP can
auto detect if 3-pin or 4-pin fan is in use.
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector
• 1 x Front Panel Audio Connector
• 1 x Thunderbolt AIC Connector (5-pin)
• 2 x USB 2.0 Headers (Support 3 USB 2.0 ports) (Supports
ESD Protection)
• 1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports)
(Supports ESD Protection)
BIOS • AMI UEFI Legal BIOS with multilingual GUI support

Feature • ACPI 6.0 Compliant wake up events
• SMBIOS 2.7 Support
• DRAM, PCH 1.0V, VCCIO, VCCST, VCCSA, VPPM Voltage
Multi-adjustment
Hardware • Temperature Sensing: CPU, Chassis/Water Pump Fans

Monitor • Fan Tachometer: CPU, Chassis/Water Pump Fans
• Quiet Fan (Auto adjust chassis fan speed by CPU tempera-
ture): CPU, Chassis/Water Pump Fans
• Fan Multi-Speed Control: CPU, Chassis/Water Pump Fans
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,
VPPM, PCH 1.0V, VCCSA, VCCST
OS • Microsoft® Windows® 10 64-bit
Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)
* For detailed product information, please visit our website: http://www.asrock.com

English
5
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.
English
6
B360 Pro4
1.3 Motherboard Layout
1 2 3 4 5
Antenna Port
CPU_FAN1
B: USB3_2
T: USB3_1
USB 3.1 Gen1
Keyboard
ATX12V1
/Mouse
PS2
VGA1
DVI1
DDR4_A1 (64 bit, 288-pin module)
DDR4_B1 (64 bit, 288-pin module)
DDR4_B2 (64 bit, 288-pin module)

DDR4_A2 (64 bit, 288-pin module)
ATXPWR1
HDMI1
USB 3.1 Gen2

T:USB31_TA_1
B: USB31_TC_1
USB 2.0
T: USB_1 Top:
CHA_FAN2/WP
B: USB_2 RJ-45
Ultra M.2
PCIe Gen3 x4 AMD
CROSSFIRE
USB 3.1
LINE IN
Top:
MIC IN
Bottom:
FRONT
Center:
USB3_3_4
M2_1
7
PCIE1 CT1 CT2 CT3 CT4
PCIE2
PCI Express 3.0 8
SATA3_3
SATA3_2
M2_3
LAN
9
CMOS
M2_3_CT1
SUPER Battery 10
SATA3_1
SATA3_0
I/O
Intel
PCIE3 B360 11
AUDIO
CODEC
B360 Pro4
PCIE4
T B1
1
24 RoHS
M2_2
CT5 CT6 CT7 CT8
PCIE5
SPK_PLED1
23
CLRMOS1
1
12
1 CHA_FAN3/WP
PANEL1
HD_AUDIO1 COM1 TPMS1 USB_3_4 CHA_FAN1/WP SATA3_5 SATA3_4
PLED PWRBTN
English
USB_5
1
1 1 1 1
1 HDLED RESET
22 21 20 19 18 17 16 15 14 13
7
No. Description
1 ATX 12V Power Connector (ATX12V1)
2 Chassis Fan / Waterpump Fan Connector (CHA_FAN2/WP)
3 CPU Fan Connector (CPU_FAN1)
4 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
5 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
6 ATX Power Connector (ATXPWR1)
7 USB 3.1 Gen1 Header (USB3_3_4)
8 SATA3 Connector (SATA3_3)
12 Power LED and Speaker Header (SPK_PLED1)
15 System Panel Header (PANEL1)
18 USB 2.0 Header (USB_3_4)
19 USB 2.0 Header (USB_5)
20 TPM Header (TPMS1)
21 COM Port Header (COM1)
22 Front Panel Audio Header (HD_AUDIO1)
23 Clear CMOS Jumper (CLRMOS1)
24 Thunderbolt AIC Connector (TB1)
English
8
B360 Pro4
1.4 I/O Panel
5
1 2 3 4 6
13 12 11 10 9 8 7
No. Description No. Description

1 PS/2 Mouse/Keyboard Port 8 USB 2.0 Ports (USB_1_2)
2 D-Sub Port 9 USB 3.1 Gen2 Type-C Port (USB31_TC_1)
3 USB 3.1 Gen2 Type-A Port (USB31_TA_1) 10 HDMI Port
4 LAN RJ-45 Port* 11 DVI-D Port
5 Line In (Light Blue)** 12 USB 3.1 Gen1 Ports (USB3_1_2)
6 Front Speaker (Lime)** 13 Antenna Ports
7 Microphone (Pink)**
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
English
9
** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi-
channel audio feature through the audio driver.
Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager.
Function of the Audio Ports in 7.1-channel Configuration:
Port Function
Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out
English
10
B360 Pro4
Chapter 2 Installation
This is an ATX form factor motherboard. Before you install the motherboard, study
the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
English
11
2.1 Installing the CPU
1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap
is on the socket, if the CPU surface is unclean, or if there are any bent pins in the
socket. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.
2
English
12
B360 Pro4
3 4
English
13
Please save and replace the cover if the processor is removed. The cover must be
placed if you wish to return the motherboard for after service.
English
14
B360 Pro4
2.2 Installing the CPU Fan and Heatsink
1 2
N
FA
U_
CP
English
15
2.3 Installing Memory Modules (DIMM)
This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.
1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.
Dual Channel Memory Configuration
Priority DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

1 Populated Populated
2 Populated Populated Populated Populated
The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
English
16
B360 Pro4
3
English
17
2.4 Expansion Slots (PCI Express Slots)
There are 5 PCI Express slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.
PCIe slots:
PCIE1 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE4 (PCIe 3.0 x16 slot) is used for PCI Express x4 lane width graphics cards.
* If PCIE3 or PCIE5 is occupied, PCIE4 will downgrade to x2 mode.
PCIe Slot Configurations

PCIE2 PCIE4
Single Graphics Card x16 N/A
Two Graphics Cards in

x16 x4
CrossFireXTM Mode
For a better thermal environment, please connect a chassis fan to the motherboard’s
chassis fan connector (CHA_FAN1/WP, CHA_FAN2/WP or CHA_FAN3/WP) when
using mul-tiple graphics cards.
English
18
B360 Pro4
2.5 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Clear CMOS Jumper

(CLRMOS1)
(see p.7, No. 23) Default Clear CMOS
CLRMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn off the computer and unplug the power
cord from the power supply. After waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRMOS1 for 5 seconds. However, please do not clear the
CMOS right after you update the BIOS. If you need to clear the CMOS when you
just finish updating the BIOS, you must boot up the system first, and then shut it
down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default profile will be cleared only if the CMOS battery is
removed.
English
19
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.
System Panel Header PLED+ Connect the power

PLED-
(9-pin PANEL1) PWRBTN#
GND
button, reset button and
(see p.7, No. 15) system status indicator on
1
GND
the chassis to this header
RESET#
GND according to the pin
HDLED-
HDLED+ assignments below. Note
the positive and negative
pins before connecting
the cables.
PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way to
turn off your system using the power button.
RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to
restart the computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when
the system is operating. The LED keeps blinking when the system is in S1/S3 sleep
state. The LED is off when the system is in S4 sleep state or powered off (S5).
HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on
when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists
of power button, reset button, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
English
20
B360 Pro4
Power LED and Speaker SPEAKER Please connect the

DUMMY
Header DUMMY
chassis power LED and
(7-pin SPK_PLED1) +5V the chassis speaker to this
(see p.7, No. 12) header.
1
PLED+
PLED+
PLED-
Serial ATA3 Connectors These six SATA3

(SATA3_0: connectors support SATA
see p.7, No. 11) data cables for internal
SATA3_2
SATA3_3
(SATA3_1: storage devices with up to
see p.7, No. 10) 6.0 Gb/s data transfer rate.
(SATA3_2:
SATA3_0
SATA3_1
* If M2_1 is occupied by
see p.7, No. 9)
a SATA-type M.2 device,
(SATA3_3:
SATA3_5 will be disabled.
see p.7, No. 8)
(SATA3_4: * If M2_2 is occupied by
SATA3_5 SATA3_4
see p.7, No. 13) a SATA-type M.2 device,
(SATA3_5: SATA3_0 will be disabled.
see p.7, No. 14)
USB_PWR
USB 2.0 Headers P- There are two USB
P+
(9-pin USB_3_4) GND
DUMMY 2.0 headers on this
(see p.7, No. 18) motherboard.
1
GND
P+
P-
USB_PWR
(4-pin USB_5) 1
GND
(see p.7, No. 19) P-
P+
USB_PWR
English
21
USB 3.1 Gen1 Header Vbus
Vbus
IntA_PB_SSRX-
There is one header on
(19-pin USB3_3_4) IntA_PA_SSRX-
IntA_PA_SSRX+
IntA_PB_SSRX+
GND
this motherboard. This
(see p.7, No. 7) GND
IntA_PA_SSTX-
IntA_PB_SSTX-
IntA_PB_SSTX+
USB 3.1 Gen1 header can
IntA_PA_SSTX+
GND
GND
IntA_PB_D-
support two ports.
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
Front Panel Audio Header This header is for

GND
PRESENCE#
MIC_RET
(9-pin HD_AUDIO1) OUT_RET connecting audio devices
(see p.7, No. 22) to the front audio panel.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis
must support HDA to function correctly. Please follow the instructions in our
manual and chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.
Chassis Fan / Waterpump 4 3 2 1 Please connect fan cables

Fan Connectors to the fan connectors and
(4-pin CHA_FAN1/WP) FAN_SPEED_CONTROL match the black wire to
(see p.7, No. 17) CHA_FAN_SPEED
FAN_VOLTAGE
the ground pin.
(4-pin CHA_FAN2/WP) GND
(see p.7, No. 2)

(4-pin CHA_FAN3/WP)
(see p.7, No. 16)
English
22
B360 Pro4
CPU Fan Connector This motherboard pro-

(4-pin CPU_FAN1) FAN_VOLTAGE
CPU_FAN_SPEED
vides a 4-Pin CPU fan
GND
(see p.7, No. 3) FAN_SPEED_CONTROL
(Quiet Fan) connector.
1 2 3 4
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
ATX Power Connector 12 24

This motherboard pro-
(24-pin ATXPWR1) vides a 24-pin ATX power
(see p.7, No. 6) connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13
13.
1
ATX 12V Power This motherboard pro-

Connector 8 5 vides an 8-pin ATX 12V
(8-pin ATX12V1) power connector. To use a
(see p.7, No. 1) 4 1 4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
Serial Port Header RRXD1

This COM1 header
DDTR#1
(9-pin COM1) DDSR#1
CCTS#1
supports a serial port
(see p.7, No. 21) module.
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
TPM Header This connector supports Trusted

SMB_DATA_MAIN
SMB_CLK_MAIN
S_PWRDWN#
(17-pin TPMS1) Platform Module (TPM) system,

SERIRQ#
(see p.7, No. 20) which can securely store keys,

LAD2
LAD1
GND
GND
GND
digital certificates, passwords,

1
and data. A TPM system also
helps enhance network security,
PCIRST#
+3VSB
PCICLK
LAD3
FRAME
+3V
LAD0
GND
protects digital identities, and

English
ensures platform integrity.
23
Thunderbolt AIC 1 Please connect a Thunderbolt™
Connector add-in card (AIC) to this
(5-pin TB1) connector via the GPIO cable.
(see p.7, No. 24)
English
24
B360 Pro4
2.7 CrossFireXTM and Quad CrossFireXTM Operation Guide

This motherboard supports CrossFireXTM and Quad CrossFireXTM that allows you
to install up to three identical PCI Express x16 graphics cards.
1. You should only use identical CrossFireXTM-ready graphics cards that are AMD
certified.
2. Make sure that your graphics card driver supports AMD CrossFireXTM technology.
Download the drivers from the AMD’s website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certified PSU. Please
refer to the AMD’s website for details.
4. If you pair a 12-pipe CrossFireXTM Edition card with a 16-pipe card, both cards will
operate as 12-pipe cards while in CrossFireXTM mode.
5. Different CrossFireXTM cards may require different methods to enable CrossFi-
reXTM. Please refer to AMD graphics card manuals for detailed installation guide.
2.7.1 Installing Two CrossFireXTM-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE2 slot
and the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
CrossFire Bridge Interconnects on the top of the graphics
cards. (The CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
English
25
Step 3
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connec-
tor of the graphics card that is inserted to
PCIE2 slot.
English
26
B360 Pro4
2.7.2 Driver Installation and Setup
Step 1
Power on your computer and boot into OS.
Step 2
Remove the AMD drivers if you have any VGA drivers installed in your system.
The Catalyst Uninstaller is an optional download. We recommend using this utility

to uninstall any previously installed Catalyst drivers prior to installation. Please
check AMD’s website for AMD driver updates.
Step 3
Install the required drivers and CATALYST Control Center then restart your
computer. Please check AMD’s website for details.
Step 4
Double-click the AMD Catalyst Control
AMD Catalyst Control Center Center icon in the Windows® system tray.
Step 5
In the left pane, click Performance and
then AMD CrossFireXTM . Then select
Enable AMD CrossFireX and click Apply.
Select the GPU number according to your
graphics card and click Apply. English
27
2.8 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT)
Installation Guide
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key
E) supports type 2230 WiFi/BT module and Intel® CNVi (Integrated WiFi/BT).
* The M.2 socket does not support SATA M.2 SSDs.
Before you install Intel® Integrated Connectivity (CNVi) module, be sure to turn off the AC
power.
Installing the WiFi/BT module
Step 1
Prepare a type 2230 WiFi/BT module

or Intel® CNVi (Integrated WiFi/BT)
and the screw.
Step 2
Find the nut location to be used.
PCB Length: 3cm

Module Type: Type2230
A
English
28
B360 Pro4
Step 3
Gently insert the WiFi/BT module

or Intel® CNVi (Integrated WiFi/
BT) into the M.2 slot. Please be
aware that the module only fits in one
A orientation.
A 20o
Step 4
Tighten the screw with a screwdriver

to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
A
English
29
2.9 M.2_SSD (NGFF) Module Installation Guide (M2_1)
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_1) supports M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to
Gen3 x4 (32 Gb/s).
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_5 will be disabled.
Installing the M.2_SSD (NGFF) Module
Step 1
Prepare a M.2_SSD (NGFF) module

and the screw.
4 Step 2
3
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
2
1
D C B A
No. 1 2 3 4
Nut Location A B C D
PCB Length 3cm 4.2cm 6cm 8cm
Module Type Type2230 Type 2242 Type2260 Type 2280
English
30
B360 Pro4
Step 3
Move the standoff based on the

module type and length.
The standoff is placed at the nut
D C B A
location D by default. Skip Step 3
and 4 and go straight to Step 5 if you
are going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on

the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Gently insert the M.2 (NGFF) SSD

module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
A 20o
English
31
Step 6

A
English
32
B360 Pro4
M.2_SSD (NGFF) Module Support List (M2_1)
Vendor Interface P/N

ADATA SATA3 AXNS330E-32GM-B
ADATA SATA3 ASU800NS38-256GT-C
ADATA PCIe3 x4 ASX7000NP-128GT-C
ADATA PCIe3 x4 ASX8000NP-256GM-C
ADATA PCIe3 x4 ASX8000NP-512GM-C
Apacer PCIe3 x4 AP240GZ280
Corsair PCIe3 x4 CSSD-F240GBMP500
Crucial SATA3 CT120M500SSD4
Intel SATA3 Intel SSDSCKGW080A401/80G
Intel PCIe3 x4 SSDPEKKF256G7
Intel PCIe3 x4 SSDPEKKF512G7
Kingston SATA3 SM2280S3
Kingston PCIe3 x4 SKC1000/480G
Kingston PCIe2 x4 SH2280S3/480G
OCZ PCIe3 x4 RVD400 -M2280-512G (NVME)
PATRIOT PCIe3 x4 PH240GPM280SSDR NVME
Plextor PCIe3 x4 PX-128M8PeG
Plextor PCIe3 x4 PX-1TM8PeG
Plextor PCIe PX-G256M6e
Samsung PCIe3 x4 SM961 MZVPW128HEGM (NVM)
Samsung PCIe3 x4 PM961 MZVLW128HEGR (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250) (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250BW) (NVME)
Samsung PCIe3 x4 SM951 (NVME)
Samsung PCIe3 x4 SM951 (MZHPV256HDGL)
Samsung PCIe3 x4 SM951 (MZHPV512HDGL)
Samsung PCIe3 x4 SM951 (NVME)
Samsung PCIe x4 XP941-512G (MZHPU512HCGL)
SanDisk PCIe SD6PP4M-128G
English

Team SATA3 TM4PS4128GMC105
33
TEAM PCIe3 x4 TM8FP2240G0C101
TEAM PCIe3 x4 TM8FP2480GC110
Transcend SATA3 TS256GMTS400
V-Color SATA3 VLM100-120G-2280B-RD
V-Color SATA3 VLM100-240G-2280RGB
V-Color SATA3 VSM100-240G-2280
WD SATA3 WDS100T1B0B-00AS40
WD SATA3 WDS240G1G0B-00RC30
WD PCIe3 x4 WDS256G1X0C-00ENX0 (NVME)
WD PCIe3 x4 WDS512G1X0C-00ENX0 (NVME)
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for
details: http://www.asrock.com
English
34
B360 Pro4
2.10 M.2_SSD (NGFF) Module Installation Guide (M2_2)

versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket
(M2_2) supports M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x2
(16 Gb/s).
* If M2_2 is occupied by a SATA-type M.2 device, SATA3_0 will be disabled.
Installing the M.2_SSD (NGFF) Module
Step 1
Prepare a M.2_SSD (NGFF) module

and the screw.
5 Step 2
4
3 Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
2
1
E D C B A
No. 1 2 3 4 5
Nut Location A B C D E
PCB Length 3cm 4.2cm 6cm 8cm 11cm
Module Type Type2230 Type 2242 Type2260 Type 2280 Type 22110
English
35
Step 3
Move the standoff based on the

module type and length.
The standoff is placed at the nut
E D C B A location D by default. Skip Step 3
and 4 and go straight to Step 5 if you
are going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on

the nut to be used. Hand tighten the
E D C B A
standoff into the desired nut location
on the motherboard.
Step 5
Gently insert the M.2 (NGFF) SSD

module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
E D C B A module only fits in one orientation.
E D C B A 20o
English
36
B360 Pro4
Step 6

E D NUT2 NUT1
English
37
M.2_SSD (NGFF) Module Support List
Vendor Interface P/N

Intel SATA3 Intel SSDSCKGW080A401/80G
Kingston SATA3 SM2280S3
Kingston PCIe2 x4 SH2280S3/480G
Samsung PCIe x4 XP941-512G (MZHPU512HCGL)
V-Color SATA3 VLM100-240G-2280RGB
V-Color SATA3 VSM100-240G-2280
WD SATA3 WDS100T1B0B-00AS40
WD SATA3 WDS240G1G0B-00RC30
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for
details: http://www.asrock.com
English
38
B360 Pro4
Chapter 3 Software and Utilities Operation

3.1 Installing Drivers
The Support CD that comes with the motherboard contains necessary drivers and
useful utilities that enhance the motherboard’s features.
Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD
automatically displays the Main Menu if “AUTORUN” is enabled in your computer.
If the Main Menu does not appear automatically, locate and double click on the file
“ASRSETUP.EXE” in the Support CD to display the menu.
Drivers Menu
The drivers compatible to your system will be auto-detected and listed on the
support CD driver page. Please click Install All or follow the order from top to
bottom to install those required drivers. Therefore, the drivers you install can work
properly.
Utilities Menu
The Utilities Menu shows the application software that the motherboard supports.
Click on a specific item then follow the installation wizard to install it.
English
39
3.2 A-Tuning
A-Tuning is ASRock’s multi purpose software suite with a new interface, more new
features and improved utilities.
3.2.1 Installing A-Tuning

A-Tuning can be downloaded from ASRock Live Update & APP Shop. After the
installation, you will find the icon “A-Tuning“ on your desktop. Double-click the
“A-Tuning“ icon, A-Tuning main menu will pop up.
3.2.2 Using A-Tuning

There are four sections in A-Tuning main menu: Operation Mode, System Info,
FAN-Tastic Tuning and Settings.
Operation Mode
Choose an operation mode for your computer.
English
40
B360 Pro4
System Info
View information about the system.
*The System Browser tab may not appear for certain models.
FAN-Tastic Tuning
Configure up to five different fan speeds using the graph. The fans will automatically shift
to the next speed level when the assigned temperature is met.
English
41
Settings
Configure ASRock A-Tuning. Click to select "Auto run at Windows Startup" if you
want A-Tuning to be launched when you start up the Windows operating system.
English
42
B360 Pro4
3.3 ASRock Live Update & APP Shop

The ASRock Live Update & APP Shop is an online store for purchasing and
downloading software applications for your ASRock computer. You can quickly and
easily install various apps and support utilities. With ASRock Live Update & APP
Shop, you can optimize your system and keep your motherboard up to date simply
with a few clicks.
Double-click on your desktop to access ASRock Live Update & APP Shop
utility.
*You need to be connected to the Internet to download apps from the ASRock Live Update & APP Shop.
3.3.1 UI Overview
Category Panel Hot News
Information Panel
Category Panel: The category panel contains several category tabs or buttons that
when selected the information panel below displays the relative information.
Information Panel: The information panel in the center displays data about the
currently selected category and allows users to perform job-related tasks.
English
Hot News: The hot news section displays the various latest news. Click on the image
to visit the website of the selected news and know more.
43
3.3.2 Apps
When the "Apps" tab is selected, you will see all the available apps on screen for you
to download.
Installing an App
Step 1
Find the app you want to install.
The most recommended app appears on the left side of the screen. The other various
apps are shown on the right. Please scroll up and down to see more apps listed.
You can check the price of the app and whether you have already intalled it or not.
- The red icon displays the price or "Free" if the app is free of charge.
- The green "Installed" icon means the app is installed on your computer.
Step 2
Click on the app icon to see more details about the selected app.
English
44
B360 Pro4
Step 3
If you want to install the app, click on the red icon to start downloading.
Step 4
When installation completes, you can fi nd the green "Installed" icon appears on the
upper right corner.
To uninstall it, simply click on the trash can icon .

English
*The trash icon may not appear for certain apps.
45
Upgrading an App
You can only upgrade the apps you have already installed. When there is an
available new version for your app, you will fi nd the mark of "New Version"
appears below the installed app icon.
Step 1
Click on the app icon to see more details.
Step 2
Click on the yellow icon to start upgrading.

English
46
B360 Pro4
3.3.3 BIOS & Drivers
Installing BIOS or Drivers

When the "BIOS & Drivers" tab is selected, you will see a list of recommended or
critical updates for the BIOS or drivers. Please update them all soon.
Step 1
Please check the item information before update. Click on to see more details.
Step 2
Click to select one or more items you want to update.
Step 3
Click Update to start the update process.

English
47
3.3.4 Setting
In the "Setting" page, you can change the language, select the server location, and
determine if you want to automatically run the ASRock Live Update & APP Shop
on Windows startup.
English
48
B360 Pro4
Chapter 4 UEFI SETUP UTILITY

4.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
after you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY after
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system off
and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.
English
49
4.2 EZ Mode
The EZ Mode screen appears when you enter the BIOS setup program by default. EZ
mode is a dashboard which contains multiple readings of the system’s current status.
You can check the most crucial information of your system, such as CPU speed,
DRAM frequency, SATA information, fan speed, etc.
Press <F6> or click the "Advanced Mode" button at the upper right corner of the
screen to switch to "Advanced Mode" for more options.
No. Function
1 Help
2 Load UEFI Defaults
3 Save Changes and Exit
4 Discard Changes
5 Change Language
6 Switch to Advanced Mode
English
50
B360 Pro4
4.3 Advanced Mode

The Advanced Mode provides more options to configure the BIOS settings. Refer to
the following sections for the detailed configurations.
To access the EZ Mode, press <F6> or click the "EZ Mode" button at the upper right
corner of the screen.
4.3.1 UEFI Menu Bar

The top of the screen has a menu bar with the following selections:
Main For setting system time/date information
OC Tweaker For overclocking configurations
Advanced For advanced system configurations
Tool Useful tools
H/W Monitor Displays current hardware status
Security For security settings
Boot For configuring boot settings and boot priority
Exit Exit the current screen or the UEFI Setup Utility

English
51
4.3.2 Navigation Keys
Use < > key or < > key to choose among the selections on the menu bar, and
use < > key or < > key to move the cursor up or down to select items, then
press <Enter> to get into the sub screen. You can also use the mouse to click your
required item.
Please check the following table for the descriptions of each navigation key.
Navigation Key(s) Description
+ / - To change option for the selected items
<Tab> Switch to next function
<PGUP> Go to the previous page
<PGDN> Go to the next page
<HOME> Go to the top of the screen
<END> Go to the bottom of the screen
<F1> To display the General Help Screen
<F5> Add / Remove Favorite
<F7> Discard changes and exit the SETUP UTILITY
<F9> Load optimal default values for all the settings
<F10> Save changes and exit the SETUP UTILITY
<F12> Print screen
<ESC> Jump to the Exit Screen or exit the current screen

English
52
B360 Pro4
4.4 Main Screen

When you enter the UEFI SETUP UTILITY, the Main screen will appear and
display the system overview.
My Favorite
Display your collection of BIOS items. Press F5 to add/remove your favorite items.
English
53
4.5 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.
Because the UEFI software is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.
CPU Configuration
Boot Performance Mode
Default is Max Non-Turbo performance mode. It will keep cpu Flex-ratio till OS
handoff. Max Battery mode will set CPU ratio as x8 till OS handoff. This option is
suggested for BCLK overclocking.
FCLK Frequency
Configure the FCLK Frequency.
Intel SpeedStep Technology

Intel SpeedStep technology allows processors to switch between multiple frequen-
English
cies and voltage points for better power saving and heat dissipation.
54
B360 Pro4
Intel Turbo Boost Technology

Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
Intel Speed Shift Technology

Enable/Disable Intel Speed Shift Technology support. Enabling will expose the
CPPC v2 interface to allow for hardware controlled P-sates.
Long Duration Power Limit

Configure Package Power Limit 1 in watts. When the limit is exceeded, the CPU
ratio will be lowered after a period of time. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.
Long Duration Maintained

Configure the period of time until the CPU ratio is lowered when the Long
Duration Power Limit is exceeded.
Short Duration Power Limit

Configure Package Power Limit 2 in watts. When the limit is exceeded, the CPU
ratio will be lowered immediately. A lower limit can protect the CPU and save
power, while a higher limit may improve performance.
CPU Core Current Limit

Configure the current limit of the CPU core. A lower limit can protect the CPU and
GT Current Limit
Configure the current limit of the GT slice. A lower limit can protect the CPU and
DRAM Configuration
DRAM Tweaker
Fine tune the DRAM settings by leaving marks in checkboxes. Click OK to confirm and
apply your new settings.
DRAM Timing Configuration

English
DRAM Reference Clock

Select Auto for optimized settings.
55
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.
DRAM Clock
Choose a frequency to override to clock delay for memory training. DRAM Clock
controls memory training only if ASRock Timing Optimization is disabled.
Primary Timing
CAS# Latency (tCL)
The time between sending a column address to the memory and the beginning of the data
in response.
RAS# to CAS# Delay and Row Precharge (tRCDtRP)

RAS# to CAS# Delay : The number of clock cycles required between the opening of
a row of memory and accessing columns within it.
Row Precharge: The number of clock cycles required between the issuing of the
precharge command and opening the next row.
RAS# Active Time (tRAS)

The number of clock cycles required between a bank active command and issuing the
precharge command.
Command Rate (CR)

The delay between when a memory chip is selected and when the first active command can
be issued.
Secondary Timing
Write Recovery Time (tWR)
The amount of delay that must elapse after the completion of a valid write operation,
before an active bank can be precharged.
Refresh Cycle Time (tRFC)

The number of clocks from a Refresh command until the first Activate command to
the same rank.
English
RAS to RAS Delay (tRRD_L)

The number of clocks between two rows activated in different banks of the same
rank.
56
B360 Pro4
RAS to RAS Delay (tRRD_S)

The number of clocks between two rows activated in different banks of the same
rank.
Write to Read Delay (tWTR_L)

The number of clocks between the last valid write operation and the next read command to
the same internal bank.
Write to Read Delay (tWTR_S)

The number of clocks between the last valid write operation and the next read command to
the same internal bank.
Read to Precharge (tRTP)

The number of clocks that are inserted between a read command to a row pre-
charge command to the same rank.
Four Activate Window (tFAW)

The time window in which four activates are allowed the same rank.
CAS Write Latency (tCWL)

Configure CAS Write Latency.
Third Timing
tREFI
Configure refresh cycles at an average periodic interval.
tCKE
Configure the period of time the DDR4 initiates a minimum of one refresh
command internally once it enters Self-Refresh mode.
Turn Around Timing

tRDRD_sg
Configure between module read to read delay.
tRDRD_dg
English
tRDRD_dr
57
tRDRD_dd
tRDWR_sg
Configure between module read to write delay.
tRDWR_dg
tRDWR_dr
tRDWR_dd
tWRRD_sg
Configure between module write to read delay.
tWRRD_dg
tWRRD_dr
tWRRD_dd
tWRWR_sg
Configure between module write to write delay.
tWRWR_dg
tWRWR_dr
tWRWR_dd
English
58
B360 Pro4
Round Trip Timing

RTL Init Value
Configure round trip latency init value for round trip latency training.
IO-L Init Value

Configure IO latency init value for IO latency traning.
RTL (CH A)
Configure round trip latency for channel A.
RTL (CH B)
Configure round trip latency for channel B.
IOL (CH A)
Configure IO latency for channel A.
IOL (CH B)
Configure IO latency for channel B.
IOL Offset (CH A)

Configure IO latency offset for channel A.
IOL Offset (CH B)

Configure IO latency offset for channel B.
RFR Delay (CH A)

Configure RFR Delay for Channel A.
RFR Delay (CH B)

Configure RFR Delay for Channel B.
ODT Setting
ODT WR (A1)
Configure the memory on die termination resistors' WR.
English
ODT WR (A2)
59
ODT WR (B1)
ODT WR (B2)
ODT NOM (A1)

Use this to change ODT Auto/Manual settings. The default is [Auto].
ODT NOM (A2)

ODT NOM (B1)

ODT NOM (B2)

ODT PARK (A1)

Configure the memory on die termination resistors' PARK.
ODT PARK (A2)

ODT PARK (B1)

ODT PARK (B2)

COMP Setting
RCOMP0: DQ ODT (Read)
Default is 121.
RCOMP1: DQ /CLK Ron (Drive Strength)

Default is 75.
English
RCOMP2: CMD /CTL Ron (Drive Strength)

Default is 100.
60
B360 Pro4
DQ ODT Driving
Adjust ODT Driving for better signal. Default is 60.
DQ Driving
Adjust DQ Driving for better signal. Default is 26.
Command Driving
Adjust Command Driving for better signal. Default is 20.
Control Driving
Adjust Control Driving for better signal. Default is 20.
Clock Driving
Adjust Clock Driving for better signal. Default is 26.
DQ Slew Rate
Adjust DQ Slew Rate for better signal. Default is 59.
Command Slew Rate

Adjust Command Slew Rate for better signal. Default is 53 for IN. 89 for 2N.
Control Slew Rate

Adjust Control Slew Rate for better signal. Default is 53.
Clock Slew Rate

Adjust Clock Slew Rate for better signal. Default is 53.
MRS Setting
MRS tCL
Configure the tCL for Memory MRS MR0.
MRS tWRtRTP
Configure the tWRtRTP for Memory MRS MR0.
MRS tCWL
Configure the tCWL for Memory MRS MR2.
English
MRS tCCD_L
Configure the tCL for Memory MRS MR6.
61
Advanced Setting
ASRock Timing Optimization
Enable/Disable ASRock Timing Optimization. When enabled, the memory timing
will use ASRock optimized value.
Realtime Memory Timing

Enable/Disable realtime memory timings. When enabled, the system will allow
performing realtime memory timing changes after MRC_DONE.
Command Tristate
Use this item to enable or disable Command Tristate support.
Exit On Failure
Enable/Disable Exit On Failure for MRC training steps.
Reset on Training Fail

Enable/Disable to reset system if MRC training fails.
MRC Fast Boot

Enable Memory Fast Boot to skip DRAM memory training for booting faster.
Voltage Configuration
CPU Core/Cache Voltage
Input voltage for the processor by the external voltage refulator.
CPU Load-Line Calibration

CPU Load-Line Calibration helps prevent CPU voltage droop when the system is
under heavy load.
DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].
DRAM Activating Power Supply

Configure the voltage for the DRAM Activating Power Supply.
PCH +1.0 Voltage

English
Configure the chipset voltage (1.0V).
62
B360 Pro4
VCCIO Voltage
Configure the voltage for the VCCIO.
VCCST Voltage
Configure the voltage for the VCCST.
VCCSA Voltage
Configure the voltage for the VCCSA.
Save User Default

Type a profile name and press enter to save your settings as user default.
Load User Default

Load previously saved user defaults.
Save User UEFI Setup Profile to Disk

Save current UEFI settings as an user default profile to disk.
Load User UEFI Setup Profile to Disk

Load previously saved user defaults from the disk.
English
63
4.6 Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, Storage Configuration, Intel(R) Thunder-
bolt, Super IO Configuration, ACPI Configuration, USB Configuration and Trusted
Computing.
Setting wrong values in this section may cause the system to malfunction.
UEFI Configuration
UEFI Setup Style
Select the default mode when entering the UEFI setup utility.
Active Page on Entry

Select the default page when entering the UEFI setup utility.
Full HD UEFI
When [Auto] is selected, the resolution will be set to 1920 x 1080 if the monitor
supports Full HD resolution. If the monitor does not support Full HD resolution,
English
then the resolution will be set to 1024 x 768. When [Disable] is selected, the
resolution will be set to 1024 x 768 directly.
64
B360 Pro4
4.6.1 CPU Configuration
Intel Hyper Threading Technology

Intel Hyper Threading Technology allows multiple threads to run on each core, so
that the overall performance on threaded software is improved.
Active Processor Cores

Select the number of cores to enable in each processor package.
CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C3, C6
and C7 all enabled for better power saving.
Enhanced Halt State (C1E)

Enable Enhanced Halt State (C1E) for lower power consumption.
CPU C6 State Support

Enable C6 sleep state for lower power consumption.
CPU C7 State Support

English
Enable C7 sleep state for lower power consumption.
Package C State Support
65
Enable CPU, PCIe, Memory, Graphics C State Support for power saving.
CFG Lock
This item allows you to disable or enable the CFG Lock.
CPU Thermal Throttling

Enable CPU internal thermal control mechanisms to keep the CPU from overheat-
ing.
Intel Virtualization Technology

Intel Virtualization Technology allows a platform to run multiple operating systems
and applications in independent partitions, so that one computer system can
function as multiple virtual systems.
Hardware Prefetcher
Automatically prefetch data and code for the processor. Enable for better
performance.
Adjacent Cache Line Prefetch

Automatically prefetch the subsequent cache line while retrieving the currently
requested cache line. Enable for better performance.
Software Guard Extensions (SGX)

Use this item to enable or disable Software Controlled Software Guard Extensions
(SGX).
English
66
B360 Pro4
4.6.2 Chipset Configuration
Primary Graphics Adapter

Select a primary VGA.
Above 4G Decoding
Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space
(only if the system supports 64 bit PCI decoding).
VT-d
Intel® Virtualization Technology for Directed I/O helps your virtual machine
monitor better utilize hardware by improving application compatibility and
reliability, and providing additional levels of manageability, security, isolation, and
I/O performance.
PCIE1 Link Speed

Select the link speed for PCIE1.
PCIE2 Link Speed

English
PCIE3 Link Speed

67
PCIE4 Link Speed
PCIE5 Link Speed

PCI Express Native Control

Select Enable for enhanced PCI Express power saving in OS.
PCIE ASPM Support

This option enables/disables the ASPM support for all CPU downstream devices.
PCH PCIE ASPM Support

This option enables/disables the ASPM support for all PCH PCIE devices.
DMI ASPM Support

This option enables/disables the control of ASPM on CPU side of the DMI Link.
PCH DMI ASPM Support

This option enables/disables the ASPM support for all PCH DMI devices.
Share Memory
Configure the size of memory that is allocated to the integrated graphics processor when
the system boots up.
IGPU Multi-Monitor
Select disable to disable the integrated graphics when an external graphics card is installed.
Select enable to keep the integrated graphics enabled at all times.
Intel(R) Ethernet Connection I219-V

Enable or disable the onboard network interface controller.
Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.
English
Front Panel
Enable/disable front panel HD audio.
68
B360 Pro4
Onboard HDMI HD Audio

Enable audio for the onboard digital outputs.
WAN Radio
Enable/disable the WiFi module's connectivity.
Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.
Restore on AC/Power Loss

Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.
English
69
4.6.3 Storage Configuration
SATA Controller(s)
Enable/disable the SATA controllers.
SATA Mode Selection

AHCI: Supports new features that improve performance.
Intel RST Premium (RAID): Combine multiple disk drives into a logical unit.
SATA Aggressive Link Power Management

SATA Aggressive Link Power Management allows SATA devices to enter a low
power state during periods of inactivity to save power. It is only supported by AHCI
mode.
Hard Disk S.M.A.R.T.

S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a
monitoring system for computer hard disk drives to detect and report on various
indicators of reliability.
English
70
B360 Pro4
4.6.4 Intel® Thunderbolt
Discrete Thunderbolt(TM) Support

Enable or disable the Discrete Thunderbolt(TM) Support.
Thunderbolt Boot Support

Enabled to allow booting from Bootable devices which are present behind
Thunderbolt.
Thunderbolt Usb Support

Enabled to allow booting from Usb devices which are present behind Thunderbolt.
Titan Ridge Workaround for OSUP

Enable or disable Titan Ridge Workaround for OSUP.
Security Level
This item allows you to choose a security level for the Thunderbolt ports.
SW SMI on TBT hot-plug

English
When enbled, BIOS generates software SMI to assign resource to TBT devices.
ACPI Notify on TBT Hot-plug

When enbled, BIOS generates ACPI Notify.
71
Windows 10 Thunderbolt support
Specify Windows 10 Thunderbolt support level.
Disabled: No OS native support.
Enabled: OS Native support only. no RTD3.

English
72
B360 Pro4
4.6.5 Super IO Configuration
Serial Port
Enable or disable the Serial port.
Serial Port Address

Select the address of the Serial port.
PS2 Y-Cable
Enable the PS2 Y-Cable or set this option to Auto. English
73
4.6.6 ACPI Configuration
Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.
PS/2 Keyboard Power On

Allow the system to be waked up by a PS/2 Keyboard.
PCIE Devices Power On

Allow the system to be waked up by a PCIE device and enable wake on LAN.
Ring-In Power On
Allow the system to be waked up by onboard COM port modem Ring-In signals.
RTC Alarm Power On

Allow the system to be waked up by the real time clock alarm. Set it to By OS to let
it be handled by your operating system.
USB Keyboard/Remote Power On

English
Allow the system to be waked up by an USB keyboard or remote controller.
USB Mouse Power On

Allow the system to be waked up by an USB mouse.
74
B360 Pro4
4.6.7 USB Configuration
Legacy USB Support

Enable or disable Legacy OS Support for USB 2.0 devices. If you encounter USB
compatibility issues it is recommended to disable legacy USB support. Select UEFI
Setup Only to support USB devices under the UEFI setup and Windows/Linux
operating systems only.
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.
English
75
4.6.8 Trusted Computing
Security Device Support

Enable or disable BIOS support for security device.
English
76
B360 Pro4
4.7 Tools
UEFI Tech Service

Contact ASRock Tech Service if you are having trouble with your PC. Please setup
network configuration before using UEFI Tech Service.
Instant Flash
Save UEFI files in your USB storage device and run Instant Flash to update your
UEFI.
Internet Flash - DHCP (Auto IP), Auto

ASRock Internet Flash downloads and updates the latest UEFI firmware version
from our servers for you. Please setup network configuration before using Internet
Flash.
*For BIOS backup and recovery purpose, it is recommended to plug in your USB
pen drive before using this function.
English
77
Network Configuration
Use this to configure internet connection settings for Internet Flash.
Internet Setting
Enable or disable sound effects in the setup utility.
UEFI Download Server

Select a server to download the UEFI firmware.
English
78
B360 Pro4
4.8 Hardware Health Event Monitoring Screen

This section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.
Fan Tuning
Measure Fan Min Duty Cycle.
Fan-Tastic Tuning
Select a fan mode for CPU Fans 1&2, or choose Customize to set 5 CPU
temperatures and assign a respective fan speed for each temperature.
CPU Fan 1 Setting

Select a fan mode for CPU Fans, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.
CPU Fan Step Up

Set the value of CPU Fan Step Up.
CPU Fan Step Down

English
Set the value of CPU Fan Step Down.
CHA_FAN1 / WP Switch
Switch CHA_FAN1 / WP header function
79
Chassis Fan 1 Control Mode
Select DC/PWM mode for Chassis Fan 1.
Chassis Fan 1 Setting

Select a fan mode for Chassis Fan, or choose Customize to set 5 CPU temperatures
Chassis Fan 1 Temp Source

Select a fan temperature source for Chassis Fan 1.
Chassis Fan 1 Step Up

Set the value of Chassis Fan 1 Step Up.
Chassis Fan 1 Step Down

Set the value of Chassis Fan 1 Step Down.





Set the value of Chassis Fan 2 Step Down.
English

80
B360 Pro4




Set the value of Chassis Fan 3 Step Down
English
81
4.9 Security Screen
In this section you may set or change the supervisor/user password for the system.
You may also clear the user password.
Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.
User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.
Secure Boot
Use this item to enable or disable support for Secure Boot.
Intel(R) Platform Trust Technology

Enable/disable Intel PTT in ME. Disable this option to use discrete TPM Module.
English
82
B360 Pro4
4.10 Boot Screen

This section displays the available devices on your system for you to configure the
boot settings and the boot priority.
Fast Boot
Fast Boot minimizes your computer's boot time. In fast mode you may not boot
from an USB storage device. The VBIOS must support UEFI GOP if you are using
an external graphics card. Please notice that Ultra Fast mode will boot so fast that
the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to
UEFI utility in Windows.
Boot From Onboard LAN

Allow the system to be waked up by the onboard LAN.
Setup Prompt Timeout

Configure the number of seconds to wait for the setup hot key.
Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots up.
Boot Beep
English
Select whether the Boot Beep should be turned on or off when the system boots up. Please
note that a buzzer is needed.
83
Full Screen Logo
Enable to display the boot logo or disable to show normal POST messages.
AddOn ROM Display

Enable AddOn ROM Display to see the AddOn ROM messages or configure the
AddOn ROM if you've enabled Full Screen Logo. Disable for faster boot speed.
Boot Failure Guard Message

If the computer fails to boot for a number of times the system automatically restores
the default settings.
CSM (Compatibility Support Module)
CSM
Enable to launch the Compatibility Support Module. Please do not disable unless
you’re running a WHCK test.
Launch PXE OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
English
execute both legacy and UEFI option ROM.
84
B360 Pro4
Launch Storage OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
execute both legacy and UEFI option ROM.
Other PCI Device ROM Priority

For PCI devices other than Network. Mass storage or Video defines which OpROM-
to launch.
English
85
4.11 Exit Screen
Save Changes and Exit

When you select this option the following message, “Save configuration changes
and exit setup?” will pop out. Select [OK] to save changes and exit the UEFI SETUP
UTILITY.
Discard Changes and Exit

When you select this option the following message, “Discard changes and exit
setup?” will pop out. Select [OK] to exit the UEFI SETUP UTILITY without saving
any changes.
Discard Changes
When you select this option the following message, “Discard changes?” will pop
out. Select [OK] to discard all changes.
Load UEFI Defaults

Load UEFI default values for all options. The F9 key can be used for this operation.
Launch EFI Shell from filesystem device

Copy shellx64.efi to the root directory to launch EFI Shell.
English
86
Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at https://event.asrock.com/tsd.asp
ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
Taipei City 112, Taiwan (R.O.C.)
ASRock EUROPE B.V.

Bijsterhuizen 11-11
6546 AR Nijmegen
The Netherlands
Phone: +31-24-345-44-33
Fax: +31-24-345-44-38
ASRock America, Inc.

13848 Magnolia Ave, Chino, CA91710
U.S.A.
Phone: +1-909-590-8308
Fax: +1-909-590-1026
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2.1077(a)
Responsible Party Name: ASRock Incorporation
Address: 13848 Magnolia Ave, Chino, CA91710
Phone/Fax No: +1-909-590-8308/+1-909-590-1026
hereby declares that the product
Product Name : Motherboard
Model Number : B360 Pro4
Conforms to the following specifications:
FCC Part 15, Subpart B, Unintentional Radiators
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Representative Person’s Name: James
Signature :
Date : May 12, 2017

EU Declaration of Conformity
For the following equipment:
Motherboard
(Product Name)
B360 Pro4 / ASRock
(Model Designation / Trade Name)
ASRock Incorporation
(Manufacturer Name)
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.)
(Manufacturer Address)
‫ ڛ‬EMC —Directive 2014/30/EU (from April 20th, 2016)

☐ EN 55022:2010/AC:2011 Class B ‫ ڛ‬EN 55024:2010/A1:2015
‫ ڛ‬EN 55032:2012+AC:2013 Class B ‫ ڛ‬EN 61000-3-3:2013
‫ ڛ‬EN 61000-3-2:2014
☐ LVD —Directive 2014/35/EU (from April 20th, 2016)

☐ EN 60950-1 : 2011+ A2: 2013 ☐ EN 60950-1 : 2006/A12: 2011
‫ ڛ‬RoHS — Directive 2011/65/EU

‫ ڛ‬CE marking
(EU conformity marking)
ASRock EUROPE B.V.

(Company Name)
Bijsterhuizen 1111 6546 AR Nijmegen The Netherlands
(Company Address)
Person responsible for making this declaration:
(Name, Surname)
A.V.P
(Position / Title)
March 9, 2018
(Date)
P/N: 15G062077000AK V1.0

B360 Pro4

Uploaded by

Copyright:

Available Formats

B360 Pro4

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

B360 Pro4

Uploaded by

Copyright:

Available Formats

Version 1.

CALIFORNIA, USA ONLY

ASRock Website: http://www.asrock.com

1.3 Motherboard Layout 7

1.4 I/O Panel 9

2.2 Installing the CPU Fan and Heatsink 15

2.3 Installing Memory Modules (DIMM) 16

2.4 Expansion Slots (PCI Express Slots) 18

2.5 Jumpers Setup 19

2.6 Onboard Headers and Connectors 20

2.7 CrossFireX TM and Quad CrossFireX TM Operation Guide 25

2.7.1 Installing Two CrossFireX TM-Ready Graphics Cards 25

2.7.2 Driver Installation and Setup 27

2.8 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT)

2.9 M.2_SSD (NGFF) Module Installation Guide (M2_1) 30

2.10 M.2_SSD (NGFF) Module Installation Guide (M2_2) 35

Chapter 3 Software and Utilities Operation 39

3.2.2 Using A-Tuning 40

3.3 ASRock Live Update & APP Shop 43

3.3.3 BIOS & Drivers 47

Chapter 4 UEFI SETUP UTILITY 49

4.3 Advanced Mode 51

4.3.1 UEFI Menu Bar 51

4.3.2 Navigation Keys 52

4.4 Main Screen 53

4.5 OC Tweaker Screen 54

4.6 Advanced Screen 64

4.6.1 CPU Configuration 65

4.6.2 Chipset Configuration 67

4.6.3 Storage Configuration 70

4.6.4 Intel® Thunderbolt 71

4.6.5 Super IO Configuration 73

4.6.6 ACPI Configuration 74

4.6.7 USB Configuration 75

4.6.8 Trusted Computing 76

4.8 Hardware Health Event Monitoring Screen 79

4.9 Security Screen 82

4.10 Boot Screen 83

4.11 Exit Screen 86

In this documentation, Chapter 1 and 2 contains the introduction of the

1.1 Package Contents

Platform • ATX Form Factor

CPU • Supports 8th Generation Intel® CoreTM Processors (Socket

Chipset • Intel® B360

Memory • Dual Channel DDR4 Memory Technology

Expansion • 2 x PCI Express 3.0 x16 Slots (PCIE2/PCIE4: single at x16

• Supports Intel® UHD Graphics Built-in Visuals : Intel®

Audio • 7.1 CH HD Audio with Content Protection (Realtek ALC892

LAN • Gigabit LAN 10/100/1000 Mb/s

Storage • 6 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

Connector • 1 x COM Port Header

1A (12W) fan power.

• 3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan

BIOS • AMI UEFI Legal BIOS with multilingual GUI support

Hardware • Temperature Sensing: CPU, Chassis/Water Pump Fans

OS • Microsoft® Windows® 10 64-bit

* For detailed product information, please visit our website: http://www.asrock.com

1.3 Motherboard Layout

DDR4_A1 (64 bit, 288-pin module)

DDR4_B1 (64 bit, 288-pin module)