Version 1.

0
Published April 2020
Copyright©2020 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.

Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage caused by our
goods. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure. If
you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard
International call charges apply)

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Contents

Chapter 1 Introduction 1
1.1 Package Contents 1

1.2 Specifications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 9

Chapter 2 Installation 11
2.1 Installing the CPU 12

2.2 Installing the CPU Fan and Heatsink 15

2.3 Installing Memory Modules (DIMM) 16

2.4 Expansion Slots (PCI Express Slots) 18

2.5 Jumpers Setup 19

2.6 Onboard Headers and Connectors 20

Chapter 3 Software and Utilities Operation 24

3.1 Installing Drivers 24

3.2 ASRock Motherboard Utility (A-Tuning) 25

3.2.1 Installing ASRock Motherboard Utility (A-Tuning) 25

3.2.2 Using ASRock Motherboard Utility (A-Tuning) 25

3.3 ASRock Live Update & APP Shop 28

3.3.1 UI Overview 28

3.3.2 Apps 29

3.3.3 BIOS & Drivers 32

3.3.4 Setting 33
Chapter 4 UEFI SETUP UTILITY 34
4.1 Introduction 34

4.2 EZ Mode 35

4.3 Advanced Mode 36

4.3.1 UEFI Menu Bar 36

4.3.2 Navigation Keys 37

4.4 Main Screen 38

4.5 OC Tweaker Screen 40

4.6 Advanced Screen 48

4.6.1 CPU Configuration 49

4.6.2 Chipset Configuration 51

4.6.3 Storage Configuration 54

4.6.4 Super IO Configuration 55

4.6.5 ACPI Configuration 56

4.6.6 USB Configuration 57

4.6.7 Trusted Computing 58

4.7 Tools 59

4.8 Hardware Health Event Monitoring Screen 61

4.9 Security Screen 63

4.10 Boot Screen 64

4.11 Exit Screen 67

 H410M-HDV
H410M-HVS

Chapter 1 Introduction
Thank you for purchasing ASRock H410M-HDV / H410M-HVS motherboard,
a reliable motherboard produced under ASRock’s consistently stringent quality
control. It delivers excellent performance with robust design conforming to
ASRock’s commitment to quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the

motherboard and step-by-step installation guides. Chapter 3 contains the operation
guide of the software and utilities. Chapter 4 contains the configuration guide of
the BIOS setup.

Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any
modifications of this documentation occur, the updated version will be available on
ASRock’s website without further notice. If you require technical support related to
this motherboard, please visit our website for specific information about the model
you are using. You may find the latest VGA cards and CPU support list on ASRock’s
website as well. ASRock website http://www.asrock.com.

1.1 Package Contents

• ASRock H410M-HDV / H410M-HVS Motherboard (Micro ATX Form Factor)
• ASRock H410M-HDV / H410M-HVS Quick Installation Guide
• ASRock H410M-HDV / H410M-HVS Support CD
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x I/O Panel Shield
English

1
 1.2 Specifications

Platform • Micro ATX Form Factor

• Solid Capacitor design

CPU • Supports 10th Gen Intel® CoreTM Processors (Socket 1200)

• Digi Power design
• 5 Power Phase design
• Supports Intel® Turbo Boost Max 3.0 Technology

Chipset • Intel® H410

Memory • Dual Channel DDR4 Memory Technology

• 2 x DDR4 DIMM Slots
• Supports DDR4 2933/2800/2666/2400/2133 non-ECC, un-
buffered memory
* Please refer to Memory Support List on ASRock's website for
more information. (http://www.asrock.com/)
* CoreTM (i9/i7) support DDR4 up to 2933; CoreTM (i5/i3),
Pentium® and Celeron® support DDR4 up to 2666.
• Supports ECC UDIMM memory modules (operate in non-
ECC mode)
• Max. capacity of system memory: 64GB
• Supports Intel® Extreme Memory Profile (XMP) 2.0
• 15μ Gold Contact in DIMM Slots

Expansion • 1 x PCI Express 3.0 x16 Slot

Slot * Supports NVMe SSD as boot disks
• 1 x PCI Express 3.0 x1 Slot

Graphics • Intel® UHD Graphics Built-in Visuals and the VGA outputs
can be supported only with processors which are GPU
integrated.
• Hardware Accelerated Codecs: AVC/H.264, HEVC/H.265
8bit, HEVC/H.265 10bit, VP8, VP9 8bit, VP9 10bit, MPEG 2,
English

MJPEG, VC-1
* VP9 10bit and VC-1 are for decode only.
* VP8 and VP9 encode are not supported by Windows OS.

2
 H410M-HDV
H410M-HVS

• Graphics, Media & Compute: Microsoft DirectX 12, OpenGL

4.5, Intel® Built In Visuals, Intel® Quick Sync Video, Hybrid /
Switchable Graphics, OpenCL 2.1
• Display & Content Security: Rec. 2020 (Wide Color Gamut),
Microsoft PlayReady 3.0, Intel® SGX Content Protection,
UHD/HDR Blu-ray Disc
H410M-HDV:
• Three graphics output options: D-Sub, DVI-D and HDMI
* Supports up to 2 displays simultaneously
• Supports HDMI 1.4 with max. resolution up to 4K x 2K
(4096x2160) @ 30Hz
• Supports DVI-D with max. resolution up to 1920x1200 @
60Hz
• Supports D-Sub with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI 1.4 Port (Compliant
HDMI monitor is required)
• Supports HDCP 2.3 with DVI-D and HDMI 1.4 Ports
• Supports 4K Ultra HD (UHD) playback with HDMI 1.4 Port
H410M-HVS:
• Dual graphics output: support HDMI and D-Sub ports by
independent display controllers
• Supports HDMI 1.4 with max. resolution up to 4K x 2K
(4096x2160) @ 30Hz
• Supports D-Sub with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI 1.4 Port (Compliant
HDMI monitor is required)
• Supports HDCP 2.3 with HDMI 1.4 Port
• Supports 4K Ultra HD (UHD) playback with HDMI 1.4 Port

Audio • 7.1 CH HD Audio (Realtek ALC887 Audio Codec)

• Supports Surge Protection
English

LAN • PCIE x1 Gigabit LAN 10/100/1000 Mb/s

• 1 x Realtek RTL8111H
• Supports Wake-On-LAN

3
 • Supports Lightning/ESD Protection
• Supports Energy Efficient Ethernet 802.3az
• Supports PXE

Rear Panel • 1 x PS/2 Mouse/Keyboard Port

I/O • 4 x USB 2.0 Ports (Supports ESD Protection)
• 2 x USB 3.2 Gen1 Ports (Supports ESD Protection)
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Line in / Front Speaker / Microphone
H410M-HDV:
• 1 x D-Sub Port
• 1 x DVI-D Port
• 1 x HDMI Port
H410M-HVS:
• 1 x D-Sub Port
• 1 x HDMI Port

Storage • 4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

Hot Plug

Connector • 1 x SPI TPM Header

• 1 x Chassis Intrusion and Speaker Header
• 1 x CPU Fan Connector (4-pin)
* The CPU Fan Connector supports the CPU fan of maximum
1A (12W) fan power.
• 1 x Chassis/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)
* The Chassis/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
* CHA_FAN1/WP can auto detect if 3-pin or 4-pin fan is in use.
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector
• 1 x Front Panel Audio Connector
• 1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports
ESD Protection)
English

• 1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports)

(Supports ESD Protection)

4
 H410M-HDV
H410M-HVS

BIOS • AMI UEFI Legal BIOS with multilingual GUI support

Feature • ACPI 6.0 Compliant wake up events
• SMBIOS 2.7 Support
• CPU Core/Cache, GT, DRAM, PCH +1.0V, VCCST Voltage
Multi-adjustment

Hardware • Temperature Sensing: CPU, Chassis/Water Pump Fans

Monitor • Fan Tachometer: CPU, Chassis/Water Pump Fans
• Quiet Fan (Auto adjust chassis fan speed by CPU tempera-
ture): CPU, Chassis/Water Pump Fans
• Fan Multi-Speed Control: CPU, Chassis/Water Pump Fans
• CASE OPEN detection
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, PCH
+1.0V

OS • Microsoft® Windows® 10 64-bit

Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.
English

5
 1.3 Motherboard Layout

H410M-HDV:
English

6
 H410M-HDV
H410M-HVS

H410M-HVS:

English

7
 No. Description
1 ATX 12V Power Connector (ATX12V1)
2 Chassis/Water Pump Fan Connector (CHA_FAN1/WP)
3 CPU Fan Connector (CPU_FAN1)
4 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
5 ATX Power Connector (ATXPWR1)
6 USB 3.2 Gen1 Header (USB3_3_4)
7 Clear CMOS Jumper (CLRMOS1)
8 USB 2.0 Header (USB_5_6)
9 SATA3 Connector (SATA3_0)
10 SATA3 Connector (SATA3_1)
11 SATA3 Connector (SATA3_2)
12 SATA3 Connector (SATA3_3)
13 SPI TPM Header (SPI_TPM_J1)
14 Chassis Intrusion and Speaker Header (SPK_CI1)
15 System Panel Header (PANEL1)
16 Front Panel Audio Header (HD_AUDIO1)
English

8
 H410M-HDV
H410M-HVS

1.4 I/O Panel

H410M-HDV:
4
1 2 3 5

11 10 9 8 7 6

No. Description No. Description

1 D-Sub Port 7 USB 2.0 Ports (USB_34)
2 USB 2.0 Ports (USB_12) 8 USB 3.2 Gen1 Ports (USB3_12)
3 LAN RJ-45 Port* 9 PS/2 Mouse/Keyboard Port
4 Line In (Light Blue)** 10 HDMI Port
5 Front Speaker (Lime)** 11 DVI-D Port
6 Microphone (Pink)**

H410M-HVS:
4
1 2 3 5

10 9 8 7 6

No. Description No. Description

1 D-Sub Port 6 Microphone (Pink)**
English

2 USB 2.0 Ports (USB_12) 7 USB 2.0 Ports (USB_34)

3 LAN RJ-45 Port* 8 USB 3.2 Gen1 Ports (USB3_12)
4 Line In (Light Blue)** 9 PS/2 Mouse/Keyboard Port
5 Front Speaker (Lime)** 10 HDMI Port

9
 * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

** Function of the Audio Ports in 7.1-channel Configuration:

Port Function
Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out
English

10
 H410M-HDV
H410M-HVS

Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard,
study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

English

11
 2.1 Installing the CPU

1. Before you insert the 1200-Pin CPU into the socket, please check if the PnP cap
is on the socket, if the CPU surface is unclean, or if there are any bent pins in the
socket. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.

2
English

12
 H410M-HDV
H410M-HVS

3 4

English

13
 Please save and replace the cover if the processor is removed. The cover must be
placed if you wish to return the motherboard for after service.
English

14
 H410M-HDV
H410M-HVS

2.2 Installing the CPU Fan and Heatsink

1 2

N
FA
U_
CP

English

15
 2.3 Installing Memory Modules (DIMM)

This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.

1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one memory
module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.

The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
English

16
 H410M-HDV
H410M-HVS

3
English

17
 2.4 Expansion Slots (PCI Express Slots)
There are 2 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.

PCIe slots:

PCIE1 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
English

18
 H410M-HDV
H410M-HVS

2.5 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.

Clear CMOS Jumper Short: Clear CMOS

(CLRMOS1) Open: Default
(see p.6, 7, No. 7) 2-pin Jumper

CLRMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system setup
parameters. To clear and reset the system parameters to default setup, please turn
off the computer and unplug the power cord, then use a jumper cap to short the
pins on CLRMOS1 for 3 seconds. Please remember to remove the jumper cap after
clearing the CMOS. If you need to clear the CMOS when you just finish updating
the BIOS, you must boot up the system first, and then shut it down before you do
the clear-CMOS action.

If you clear the CMOS, the case open may be detected. Please adjust the BIOS option
“Clear Status” to clear the record of previous chassis intrusion status.
English

19
 2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.

System Panel Header PLED+

PLED-
Connect the power
(9-pin PANEL1) PWRBTN#
GND button, reset button and
(see p.6, 7, No. 15) system status indicator on
1
GND
the chassis to this header
RESET#
GND according to the pin
HDLED-
HDLED+ assignments below. Note
the positive and negative
pins before connecting
the cables.

PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way
to turn off your system using the power button.

RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to
restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when
the system is operating. The LED keeps blinking when the system is in S1/S3 sleep
state. The LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on
when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists
of power button, reset button, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.

SPEAKER
Chassis Intrusion and Please connect the
DUMMY
Speaker Header DUMMY chassis intrusion and the
English

+5V
(7-pin SPK_CI1) chassis speaker to this
(see p.6, 7, No. 14) 1 header.
SIGNAL
GND
DUMMY

20
 H410M-HDV
H410M-HVS

Serial ATA3 Connectors These four SATA3

SATA3_3 SATA3_1
SATA3_0
(SATA3_0: connectors support SATA
see p.6, 7, No. 9) data cables for internal
(SATA3_1: storage devices with up to

SATA3_2
see p.6, 7, No. 10) 6.0 Gb/s data transfer rate.
(SATA3_2:
see p.6, 7, No. 11)
(SATA3_3:
see p.6, 7, No. 12)

USB 2.0 Header There is one header on

(9-pin USB_5_6) this motherboard. This
(see p.6, 7, No. 8) USB 2.0 header can
support two ports.

USB 3.2 Gen1 Header Vbus There is one header on

Vbus IntA_PB_SSRX-

(19-pin USB3_3_4) IntA_PA_SSRX- IntA_PB_SSRX+ this motherboard. This

IntA_PA_SSRX+ GND

(see p.6, 7, No. 6) GND IntA_PB_SSTX- USB 3.2 Gen1 header can
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+ GND support two ports.
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1

Front Panel Audio Header OUT_RET OUT2_L

This header is for
(9-pin HD_AUDIO1) J_SENSE connecting audio devices
MIC_RET OUT2_R
(see p.6, 7, No. 16) PRESENCE# MIC2_R to the front audio panel.
GN D MIC2_L
1

1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis
must support HDA to function correctly. Please follow the instructions in our
manual and chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
English

D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.

21
 Chassis/Water Pump Fan This motherboard provides one
FAN_SPEED
Connector FAN_VOLTAGE_CONTROL
FAN_SPEED_CONTROL
4-Pin water cooling chassis fan
GND

(4-pin CHA_FAN1/WP) connector. If you plan to connect

(see p.6, 7, No. 2) a 3-Pin chassis water cooler fan,
please connect it to Pin 1-3.

CPU Fan Connector +12V This motherboard

CPU_FAN_SPEED
(4-pin CPU_FAN1) GND FAN_SPEED_CONTROL provides a 4-Pin CPU fan
(see p.6, 7, No. 3) (Quiet Fan) connector.
1 2 3 4
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.

ATX Power Connector 12 24 This motherboard pro-

(24-pin ATXPWR1) vides a 24-pin ATX power
(see p.6, 7, No. 5) connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
1 13 13.

ATX 12V Power 8 5 This motherboard

Connector provides a 8-pin ATX 12V
(8-pin ATX12V1) 4 1
power connector. To use a
(see p.6, 7, No. 1) 4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.
English

22
 H410M-HDV
H410M-HVS

SPI TPM Header SPI_DQ3

+3.3V
This connector supports SPI
Dummy
(13-pin SPI_TPM_J1) CLK
SPI_MOSI
Trusted Platform Module (TPM)
(see p.6, 7, No. 13) RST#
TPM_PIRQ system, which can securely store
1
keys, digital certificates, pass-
SPI_TPM_CS# words, and data. A TPM system
GND
RSMRST#
SPI_MISO
also helps enhance network
SPI_CS0
SPI_DQ2 security, protects digital
identities, and ensures platform
integrity.

English

23
 Chapter 3 Software and Utilities Operation
3.1 Installing Drivers
The Support CD that comes with the motherboard contains necessary drivers and
useful utilities that enhance the motherboard’s features.

Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD
automatically displays the Main Menu if “AUTORUN” is enabled in your computer.
If the Main Menu does not appear automatically, locate and double click on the file
“ASRSETUP.EXE” in the Support CD to display the menu.

Drivers Menu
The drivers compatible to your system will be auto-detected and listed on the
support CD driver page. Please click Install All or follow the order from top to
bottom to install those required drivers. Therefore, the drivers you install can work
properly.

Utilities Menu
The Utilities Menu shows the application software that the motherboard supports.
Click on a specific item then follow the installation wizard to install it.
English

24
 H410M-HDV
H410M-HVS

3.2 ASRock Motherboard Utility (A-Tuning)

ASRock Motherboard Utility (A-Tuning) is ASRock’s multi purpose software suite
with a new interface, more new features and improved utilities.

3.2.1 Installing ASRock Motherboard Utility (A-Tuning)

ASRock Motherboard Utility (A-Tuning) can be downloaded from ASRock Live
Update & APP Shop. After the installation, you will find the icon “ASRock Mother-
board Utility (A-Tuning)“ on your desktop. Double-click the
“ASRock Motherboard Utility (A-Tuning)“ icon, ASRock Motherboard Utility
(A-Tuning) main menu will pop up.

3.2.2 Using ASRock Motherboard Utility (A-Tuning)

There are four sections in ASRock Motherboard Utility (A-Tuning) main menu:
Operation Mode, System Info, FAN-Tastic Tuning and Settings.

Operation Mode
Choose an operation mode for your computer.

English

25
 System Info
View information about the system.
*The System Browser tab may not appear for certain models.

FAN-Tastic Tuning
Configure up to five different fan speeds using the graph. The fans will automatically shift
to the next speed level when the assigned temperature is met.
English

26
 H410M-HDV
H410M-HVS

Settings
Configure ASRock ASRock Motherboard Utility (A-Tuning). Click to select "Auto
run at Windows Startup" if you want ASRock Motherboard Utility (A-Tuning) to
be launched when you start up the Windows operating system.

English

27
 3.3 ASRock Live Update & APP Shop
The ASRock Live Update & APP Shop is an online store for purchasing and
downloading software applications for your ASRock computer. You can quickly and
easily install various apps and support utilities. With ASRock Live Update & APP
Shop, you can optimize your system and keep your motherboard up to date simply
with a few clicks.

Double-click on your desktop to access ASRock Live Update & APP Shop
utility.

*You need to be connected to the Internet to download apps from the ASRock Live Update & APP Shop.

3.3.1 UI Overview
Category Panel Hot News

Information Panel

Category Panel: The category panel contains several category tabs or buttons that
when selected the information panel below displays the relative information.

Information Panel: The information panel in the center displays data about the
currently selected category and allows users to perform job-related tasks.
English

Hot News: The hot news section displays the various latest news. Click on the image
to visit the website of the selected news and know more.

28
 H410M-HDV
H410M-HVS

3.3.2 Apps
When the "Apps" tab is selected, you will see all the available apps on screen for you
to download.

Installing an App
Step 1
Find the app you want to install.

The most recommended app appears on the left side of the screen. The other various
apps are shown on the right. Please scroll up and down to see more apps listed.

You can check the price of the app and whether you have already intalled it or not.

- The red icon displays the price or "Free" if the app is free of charge.

- The green "Installed" icon means the app is installed on your computer.

Step 2
Click on the app icon to see more details about the selected app.
English

29
 Step 3

If you want to install the app, click on the red icon to start downloading.

Step 4
When installation completes, you can find the green "Installed" icon appears on the
upper right corner.

To uninstall it, simply click on the trash can icon .

English

*The trash icon may not appear for certain apps.

30
 H410M-HDV
H410M-HVS

Upgrading an App
You can only upgrade the apps you have already installed. When there is an
available new version for your app, you will find the mark of "New Version"
appears below the installed app icon.

Step 1
Click on the app icon to see more details.

Step 2

Click on the yellow icon to start upgrading.

English

31
 3.3.3 BIOS & Drivers

Installing BIOS or Drivers

When the "BIOS & Drivers" tab is selected, you will see a list of recommended or
critical updates for the BIOS or drivers. Please update them all soon.

Step 1

Please check the item information before update. Click on to see more details.
Step 2

Click to select one or more items you want to update.

Step 3

Click Update to start the update process.

English

32
 H410M-HDV
H410M-HVS

3.3.4 Setting
In the "Setting" page, you can change the language, select the server location, and
determine if you want to automatically run the ASRock Live Update & APP Shop
on Windows startup.

English

33
 Chapter 4 UEFI SETUP UTILITY
4.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
after you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY after
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system off
and then back on.

Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.
English

34
 H410M-HDV
H410M-HVS

4.2 EZ Mode
The EZ Mode screen appears when you enter the BIOS setup program by default. EZ
mode is a dashboard which contains multiple readings of the system’s current status.
You can check the most crucial information of your system, such as CPU speed,
DRAM frequency, SATA information, fan speed, etc.

Press <F6> or click the "Advanced Mode" button at the upper right corner of the
screen to switch to "Advanced Mode" for more options.

1 2 3 4 5 6

No. Function
1 Help
2 Load UEFI Defaults
3 Save Changes and Exit
4 Discard Changes
5 Change Language
6 Switch to Advanced Mode
English

35
 4.3 Advanced Mode
The Advanced Mode provides more options to configure the BIOS settings. Refer to
the following sections for the detailed configurations.

To access the EZ Mode, press <F6> or click the "EZ Mode" button at the upper right
corner of the screen.

4.3.1 UEFI Menu Bar

The top of the screen has a menu bar with the following selections:

Main For setting system time/date information

OC Tweaker For overclocking configurations

Advanced For advanced system configurations

Tool Useful tools

H/W Monitor Displays current hardware status

Security For security settings

Boot For configuring boot settings and boot priority

Exit Exit the current screen or the UEFI Setup Utility

English

36
 H410M-HDV
H410M-HVS

4.3.2 Navigation Keys

Use < > key or < > key to choose among the selections on the menu bar, and
use < > key or < > key to move the cursor up or down to select items, then
press <Enter> to get into the sub screen. You can also use the mouse to click your
required item.

Please check the following table for the descriptions of each navigation key.

Navigation Key(s) Description

+ / - To change option for the selected items

<Tab> Switch to next function

<PGUP> Go to the previous page

<PGDN> Go to the next page

<HOME> Go to the top of the screen

<END> Go to the bottom of the screen

<F1> To display the General Help Screen

<F5> Add / Remove Favorite

<F7> Discard changes and exit the SETUP UTILITY

<F9> Load optimal default values for all the settings

<F10> Save changes and exit the SETUP UTILITY

<F12> Print screen

<ESC> Jump to the Exit Screen or exit the current screen

English

37
 4.4 Main Screen
When you enter the UEFI SETUP UTILITY, the Main screen will appear and
display the system overview.

The availability and location of BIOS settings can be different for different models
and BIOS versions.

H410M-HDV:
English

38
H410M-HVS:

My Favorite
Display your collection of BIOS items. Press F5 to add/remove your favorite items.
 4.5 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.

Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.

CPU Configuration
AVX2 Ratio Offset
AVX2 Ratio Offset specifies a negative offset from the CPU Ratio for AVX work-
loads. AVX is a more stressful workload that lower the AVX ratio to ensure maxi-
mum possible ratio for SSE workloads.

BCLK Spread Spectrum

Enable BCLK Spread Spectrum to reduce electromagnetic interference for passing
EMI tests. Disable to achieve higher clock speeds when overclocking.

BCLK Aware Adaptive Voltage

English

BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. This is ideal for
BCLK OC to avoid high voltage overrides.

40
 H410M-HDV
H410M-HVS

Boot Performance Mode

Select the performance state that the BIOS will set before OS handoff.

FCLK Frequency
Configure the FCLK Frequency.

Ring to Core Ratio Offset

Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.

Intel SpeedStep Technology

Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.

Intel Turbo Boost Technology

Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.

Intel Speed Shift Technology

Enable/Disable Intel Speed Shift Technology support. Enabling will expose the
CPPC v2 interface to allow for hardware controlled P-states.

Intel Thermal Velocity Boost Voltage Optimizations

This service controls thermal based voltage optimizations for processors that
implment the Intel Thermal Velocity Boost (TVB) feature.

DRAM Configuration
Memory Information
Allows users to browse the serial presence detect (SPD) and Intel extreme memory profile
(XMP) for DDR4 modules.

DRAM Timing Configuration

Load XMP Setting
Load XMP settings to overclock the memory and perform beyond standard specifications.
English

DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.

41
 Primary Timing
CAS# Latency (tCL)
The time between sending a column address to the memory and the beginning of the data
in response.

RAS# to CAS# Delay and Row Precharge (tRCDtRP)

RAS# to CAS# Delay : The number of clock cycles required between the opening of a row
of memory and accessing columns within it.
Row Precharge: The number of clock cycles required between the issuing of the precharge
command and opening the next row.

RAS# Active Time (tRAS)

The number of clock cycles required between a bank active command and issuing the
precharge command.

Command Rate (CR)

The delay between when a memory chip is selected and when the first active command can
be issued.

Secondary Timing
Write Recovery Time (tWR)
The amount of delay that must elapse after the completion of a valid write operation,
before an active bank can be precharged.

Refresh Cycle Time (tRFC)

The number of clocks from a Refresh command until the first Activate command to
the same rank.

RAS to RAS Delay (tRRD_L)

The number of clocks between two rows activated in different banks of the same
rank.

RAS to RAS Delay (tRRD_S)

The number of clocks between two rows activated in different banks of the same
rank.
English

Write to Read Delay (tWTR_L)

The number of clocks between the last valid write operation and the next read command to
the same internal bank.

42
 H410M-HDV
H410M-HVS

Write to Read Delay (tWTR_S)

The number of clocks between the last valid write operation and the next read command to
the same internal bank.

Read to Precharge (tRTP)

The number of clocks that are inserted between a read command to a row pre-
charge command to the same rank.

Four Activate Window (tFAW)

The time window in which four activates are allowed the same rank.

CAS Write Latency (tCWL)

Configure CAS Write Latency.

Third Timing
tREFI
Configure refresh cycles at an average periodic interval.

tCKE
Configure the period of time the DDR4 initiates a minimum of one refresh
command internally once it enters Self-Refresh mode.

Turn Around Timing

tRDRD_sg
Configure between module read to read delay.

tRDRD_dg
Configure between module read to read delay.

tRDRD_dr
Configure between module read to read delay.

tRDRD_dd
Configure between module read to read delay.

tRDWR_sg
English

Configure between module read to write delay.

tRDWR_dg
Configure between module read to write delay.
43
 tRDWR_dr
Configure between module read to write delay.

tRDWR_dd
Configure between module read to write delay.

tWRRD_sg
Configure between module write to read delay.

tWRRD_dg
Configure between module write to read delay.

tWRRD_dr
Configure between module write to read delay.

tWRRD_dd
Configure between module write to read delay.

tWRWR_sg
Configure between module write to write delay.

tWRWR_dg
Configure between module write to write delay.

tWRWR_dr
Configure between module write to write delay.

tWRWR_dd
Configure between module write to write delay.

Round Trip Timing

Round Trip Timing Optimization
Auto is enabled in general case.

RTL Init Value

Configure round trip latency init value for round trip latency training.
English

IO-L Init Value

Configure IO latency init value for IO latency training.

44
 H410M-HDV
H410M-HVS

RTL (CH A)
Configure round trip latency for channel A.

RTL (CH B)
Configure round trip latency for channel B.

IO-L (CH A)
Configure IO latency for channel A.

IO-L (CH B)
Configure IO latency for channel B.

IO-L Offset (CH A)

Configure IO latency offset for channel A.

IO-L Offset (CH B)

Configure IO latency offset for channel B.

RFR Delay (CH A)

Configure RFR Delay for Channel A.

RFR Delay (CH B)

Configure RFR Delay for Channel B.

ODT Setting
ODT WR (A1)
Configure the memory on die termination resistors' WR for channel A1.

ODT WR (B1)
Configure the memory on die termination resistors' WR for channel B1.

ODT NOM (A1)

Use this to change ODT (CH A1) Auto/Manual settings. The default is [Auto].

ODT NOM (B1)

Use this to change ODT (CH B1) Auto/Manual settings. The default is [Auto].
English

ODT PARK (A1)

Configure the memory on die termination resistors' PARK for channel A1.

45
 ODT PARK (B1)
Configure the memory on die termination resistors' PARK for channel B1.

Advanced Setting
ASRock Timing Optimization
Configure the fast path through the MRC.

Realtime Memory Timing

Configure the realtime memory timings.

[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.

Command Tristate
Configure the Command Tristate Support.

Exit On Failure
Configure the Exit On Failure for MRC training steps.

Reset On Training Fail

Reset system if the MRC training fails.

MRC Fast Boot

Enable Memory Fast Boot to skip DRAM memory training for booting faster.

Voltage Configuration
CPU Core/Cache Voltage
Input voltage for the processor by the external voltage refulator.

GT Voltage
Configure the voltage for the integrated GPU.

VCCST Voltage
Configure the voltage for the VCCST.

PCH +1.0 Voltage

English

Configure the chipset voltage.

DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].

46
 H410M-HDV
H410M-HVS

Save User Default

Type a profile name and press enter to save your settings as user default.

Load User Default

Load previously saved user defaults.

Save User UEFI Setup Profile to Disk

It helps you to save current UEFI settings as an user profile to disk.

Load User UEFI Setup Profile from Disk

You can load previous saved profile from the disk.

English

47
 4.6 Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, Storage Configuration, Super IO Configura-
tion, ACPI Configuration, USB Configuration and Trusted Computing.

Setting wrong values in this section may cause the system to malfunction.

UEFI Configuration
UEFI Setup Style
Select the default mode when entering the UEFI setup utility.

Active Page on Entry

Select the default page when entering the UEFI setup utility.

Full HD UEFI
When [Auto] is selected, the resolution will be set to 1920 x 1080 if the monitor
supports Full HD resolution. If the monitor does not support Full HD resolution,
then the resolution will be set to 1024 x 768. When [Disable] is selected, the
English

resolution will be set to 1024 x 768 directly.

48
 H410M-HDV
H410M-HVS

4.6.1 CPU Configuration

Intel Hyper Threading Technology

Intel Hyper Threading Technology allows multiple threads to run on each core, so
that the overall performance on threaded software is improved.

Active Processor Cores

Select the number of cores to enable in each processor package.

CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C3, C6
and C7 all enabled for better power saving.

Enhanced Halt State (C1E)

Enable Enhanced Halt State (C1E) for lower power consumption.

CPU C3 State Support

Enable C3 deep sleep state for lower power consumption.

CPU C6 State Support

English

Enable C6 deep sleep state for lower power consumption.

CPU C7 State Support

Enable C7 deep sleep state for lower power consumption.

49
 Package C State Support
Enable CPU, PCIe, Memory, Graphics C State Support for power saving.

CFG Lock
This item allows you to disable or enable the CFG Lock.

C6DRAM
Enable/Disable moving of DRAM contents to PRM memory when CPU is in C6
state.

Intel Virtualization Technology

Intel Virtualization Technology allows a platform to run multiple operating systems
and applications in independent partitions, so that one computer system can
function as multiple virtual systems.

Hardware Prefetcher
Automatically prefetch data and code for the processor. Enable for better
performance.

Adjacent Cache Line Prefetch

Automatically prefetch the subsequent cache line while retrieving the currently
requested cache line. Enable for better performance.

Software Guard Extensions (SGX)

Intel SGX is a set of new CPU instructions that can be used by applications to set
aside private regions of code and data.
English

50
 H410M-HDV
H410M-HVS

4.6.2 Chipset Configuration

Primary Graphics Adapter

Select a primary VGA.

Above 4G Decoding
Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space
(only if the system supports 64 bit PCI decoding).

VT-d
Intel® Virtualization Technology for Directed I/O helps your virtual machine
monitor better utilize hardware by improving application compatibility and
reliability, and providing additional levels of manageability, security, isolation, and
I/O performance.

SR-IOV Support
If system has SR-IOV capable PCIe Devices, this option Enables or Disables Single
Root IO Virtualization Support.

DMI Link Speed

Configure DMI Slot Link Speed. Auto mode is optimizing for overclocking.
English

PCIE1 Link Speed

Select the link speed for PCIE1.

51
 PCIE2 Link Speed
Select the link speed for PCIE2.

PCI Express Native Control

Select Enable for enhanced PCI Express power saving in OS.

PCIE ASPM Support

This option enables/disables the ASPM support for all CPU downstream devices.

PCH PCIE ASPM Support

This option enables/disables the ASPM support for all PCH PCIE devices.

DMI ASPM Support

This option enables/disables the control of ASPM on CPU side of the DMI Link.

PCH DMI ASPM Support

This option enables/disables the ASPM support for all PCH DMI devices.

Share Memory
Configure the size of memory that is allocated to the integrated graphics processor when
the system boots up.

IGPU Multi-Monitor
Select disable to disable the integrated graphics when an external graphics card is installed.
Select enable to keep the integrated graphics enabled at all times.

Onboard LAN
Enable or disable the onboard network interface controller.

Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.

Front Panel
Enable/disable front panel HD audio.
English

Onboard HDMI HD Audio

Enable audio for the onboard digital outputs.

52
 H410M-HDV
H410M-HVS

Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.

Restore on AC/Power Loss

Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.

English

53
 4.6.3 Storage Configuration

SATA Controller(s)
Enable/disable the SATA controllers.

SATA Aggressive Link Power Management

SATA Aggressive Link Power Management allows SATA devices to enter a low
power state during periods of inactivity to save power. It is only supported by AHCI
mode.

Hard Disk S.M.A.R.T.

S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a
monitoring system for computer hard disk drives to detect and report on various
indicators of reliability.
English

54
 H410M-HDV
H410M-HVS

4.6.4 Super IO Configuration

PS2 Y-Cable
Enable the PS2 Y-Cable or set this option to Auto.

English

55
 4.6.5 ACPI Configuration

Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.

PS/2 Keyboard S4/S5 Wakeup Support

Allow the system to be waked up by a PS/2 Keyboard in S4/S5.

PCIE Devices Power On

Allow the system to be waked up by a PCIE device and enable wake on LAN.

RTC Alarm Power On

Allow the system to be waked up by the real time clock alarm. Set it to By OS to let
it be handled by your operating system.

USB Keyboard/Remote Power On

Allow the system to be waked up by an USB keyboard or remote controller.

USB Mouse Power On

English

Allow the system to be waked up by an USB mouse.

56
 H410M-HDV
H410M-HVS

4.6.6 USB Configuration

Legacy USB Support

Enable or disable Legacy OS Support for USB 2.0 devices. If you encounter USB
compatibility issues it is recommended to disable legacy USB support. Select UEFI
Setup Only to support USB devices under the UEFI setup and Windows/Linux
operating systems only.

XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.
English

57
 4.6.7 Trusted Computing

Security Device Support

Enable or disable BIOS support for security device.
English

58
 H410M-HDV
H410M-HVS

4.7 Tools

UEFI Tech Service

Contact ASRock Tech Service if you are having trouble with your PC. Please setup
network configuration before using UEFI Tech Service.

SSD Secure Erase Tool

All the SSD's listed that supports Secure Erase function.

Instant Flash
Save UEFI files in your USB storage device and run Instant Flash to update your
UEFI.

Internet Flash - DHCP (Auto IP), Auto

ASRock Internet Flash downloads and updates the latest UEFI firmware version
from our servers for you. Please setup network configuration before using Internet
Flash.
*For BIOS backup and recovery purpose, it is recommended to plug in your USB
pen drive before using this function.
English

59
 Network Configuration
Use this to configure internet connection settings for Internet Flash.

Internet Setting
Enable or disable sound effects in the setup utility.

UEFI Download Server

Select a server to download the UEFI firmware.
English

60
 H410M-HDV
H410M-HVS

4.8 Hardware Health Event Monitoring Screen

This section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.

Fan Tuning
Measure Fan Min Duty Cycle.

Fan-Tastic Tuning
Select a fan mode for CPU Fan, or choose Customize to set 5 CPU temperatures and
assign a respective fan speed for each temperature.

CPU Fan 1 Setting

Select a fan mode for CPU Fan 1, or choose Customize to set 5 CPU temperatures and
assign a respective fan speed for each temperature.

CPU Fan 1 Step Up

Set the value of CPU Fan Step Up.

CPU Fan 1 Step Down

English

Set the value of CPU Fan Step Down.

CHA_FAN1 / W_Pump Switch

Select CHA_FAN1 / W_Pump mode.

61
 Chassis Fan 1 Control Mode
Select PWM mode or DC mode for CHA_FAN1.

Chassis Fan 1 Setting

Select a fan mode for CHA_FAN1, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Chassis Fan 1 Temp Source

Select a fan temperature source for Chassis Fan 1.

Chassis Fan 1 Step Up

Set the value of Chassis Fan 1 Step Up.

Chassis Fan 1 Step Down

Set the value of Chassis Fan 1 Step Down.

Case Open Feature

Enable or disable Case Open Feature to detect whether the chassis cover has been
removed.
English

62
 H410M-HDV
H410M-HVS

4.9 Security Screen

In this section you may set or change the supervisor/user password for the system.
You may also clear the user password.

Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.

User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.

Secure Boot
Use this item to enable or disable support for Secure Boot.

Intel(R) Platform Trust Technology

Enable/disable Intel PTT in ME. Disable this option to use discrete TPM Module.
English

63
 4.10 Boot Screen
This section displays the available devices on your system for you to configure the
boot settings and the boot priority.

Fast Boot
Fast Boot minimizes your computer's boot time. In fast mode you may not boot
from an USB storage device. The VBIOS must support UEFI GOP if you are using
an external graphics card. Please notice that Ultra Fast mode will boot so fast that
the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to
UEFI utility in Windows.

Boot From Onboard LAN

Allow the system to be waked up by the onboard LAN.

Setup Prompt Timeout

Configure the number of seconds to wait for the setup hot key.

Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots up.

Boot Beep
English

Select whether the Boot Beep should be turned on or off when the system boots up. Please
note that a buzzer is needed.

64
 H410M-HDV
H410M-HVS

Full Screen Logo

Enable to display the boot logo or disable to show normal POST messages.

AddOn ROM Display

Enable AddOn ROM Display to see the AddOn ROM messages or configure the
AddOn ROM if you've enabled Full Screen Logo. Disable for faster boot speed.

Boot Failure Guard Message

If the computer fails to boot for a number of times the system automatically restores
the default settings.

CSM (Compatibility Support Module)

CSM
Enable to launch the Compatibility Support Module. Please do not disable unless
you’re running a WHCK test.

Launch PXE OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
English

execute both legacy and UEFI option ROM.

65
 Launch Storage OpROM Policy
Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
execute both legacy and UEFI option ROM.

Other PCI Device ROM Priority

For PCI devices other than Network. Mass storage or Video defines which OpROM
to launch.
English

66
 H410M-HDV
H410M-HVS

4.11 Exit Screen

Save Changes and Exit

When you select this option the following message, “Save configuration changes
and exit setup?” will pop out. Select [OK] to save changes and exit the UEFI SETUP
UTILITY.

Discard Changes and Exit

When you select this option the following message, “Discard changes and exit
setup?” will pop out. Select [OK] to exit the UEFI SETUP UTILITY without saving
any changes.

Discard Changes
When you select this option the following message, “Discard changes?” will pop
out. Select [OK] to discard all changes.

Load UEFI Defaults

Load UEFI default values for all options. The F9 key can be used for this operation.

Launch EFI Shell from filesystem device

Copy shellx64.efi to the root directory to launch EFI Shell.
English

67
Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at http://www.asrock.com/support/tsd.asp

ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,

Taipei City 112, Taiwan (R.O.C.)

ASRock EUROPE B.V.

Bijsterhuizen 11-11

6546 AR Nijmegen

The Netherlands

Phone: +31-24-345-44-33

Fax: +31-24-345-44-38

ASRock America, Inc.

13848 Magnolia Ave, Chino, CA91710

U.S.A.

Phone: +1-909-590-8308

Fax: +1-909-590-1026
 DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2.1077(a)

Responsible Party Name: ASRock Incorporation

Address: 13848 Magnolia Ave, Chino, CA91710

Phone/Fax No: +1-909-590-8308/+1-909-590-1026

hereby declares that the product

Product Name : Motherboard

Model Number : H410M-HDV / H410M-HVS

Conforms to the following specifications:

FCC Part 15, Subpart B, Unintentional Radiators

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Representative Person’s Name: James

Signature :

Date : May 12, 2017

EU Declaration of Conformity

For the following equipment:
Motherboard
(Product Name)
H410M-HDV / H410M-HVS / ASRock
(Model Designation / Trade Name)
ASRock Incorporation
(Manufacturer Name)
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.)
(Manufacturer Address)

‫ ڛ‬EMC —Directive 2014/30/EU (from April 20th, 2016)

☐ EN 55022:2010/AC:2011 Class B ‫ ڛ‬EN 55024:2010/A1:2015
‫ ڛ‬EN 55032:2012+AC:2013 Class B ‫ ڛ‬EN 61000-3-3:2013
‫ ڛ‬EN 61000-3-2:2014

☐ LVD —Directive 2014/35/EU (from April 20th, 2016)

☐ EN 60950-1 : 2011+ A2: 2013 ☐ EN 60950-1 : 2006/A12: 2011

‫ ڛ‬RoHS — Directive 2011/65/EU

‫ ڛ‬CE marking

(EU conformity marking)

ASRock EUROPE B.V.

(Company Name)
Bijsterhuizen 1111 6546 AR Nijmegen The Netherlands
(Company Address)
Person responsible for making this declaration:

(Name, Surname)
A.V.P
(Position / Title)
May 11, 2020
(Date)
P/N: 15G062214000AK V1.0