H97M Pro4

Version 1.2
Published November 2014
Copyright©2014 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.

Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

The terms HDMI™ and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Contents

Chapter 1 Introduction 1
1.1 Package Contents 1

1.2 Specifications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 8

Chapter 2 Installation 10
2.1 Installing the CPU 11

2.2 Installing the CPU Fan and Heatsink 14

2.3 Installing Memory Modules (DIMM) 15

2.4 Expansion Slots (PCI and PCI Express Slots) 17

2.5 Jumpers Setup 18

2.6 Onboard Headers and Connectors 19

2.7 CrossFireX TM and Quad CrossFireX TM Operation Guide 24

2.7.1 Installing Two CrossFireX TM-Ready Graphics Cards 24

2.7.2 Driver Installation and Setup 26

Chapter 3 Software and Utilities Operation 27

3.1 Installing Drivers 27

3.2 A-Tuning 28

3.3 Intel® Rapid Start Technology 34

3.4 Intel® Smart Connect Technology 39

3.5 ASRock APP Shop 44

3.5.1 UI Overview 44
3.5.2 Apps 45

3.5.3 BIOS & Drivers 48

3.5.4 Setting 49

3.6 Start8 50

Chapter 4 UEFI SETUP UTILITY 53

4.1 Introduction 53

4.1.1 UEFI Menu Bar 53

4.1.2 Navigation Keys 54

4.2 Main Screen 55

4.3 OC Tweaker Screen 56

4.4 Advanced Screen 65

4.4.1 CPU Configuration 66

4.4.2 Chipset Configuration 68

4.4.3 Storage Configuration 70

4.4.4 Intel® Rapid Start Technology 72

4.4.5 Intel® Smart Connect Technology 73

4.4.6 Intel® Thunderbolt™ 74

4.4.7 Super IO Configuration 75

4.4.8 ACPI Configuration 76

4.4.9 USB Configuration 78

4.4.10 Trusted Computing 80

4.5 Tools 81

4.6 Hardware Health Event Monitoring Screen 84

4.7 Boot Screen 85

4.8 Security Screen 88

4.9 Exit Screen 89

 H97M Pro4

Chapter 1 Introduction
Thank you for purchasing ASRock H97M Pro4 motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.

In this manual, Chapter 1 and 2 contains the introduction of the motherboard

and step-by-step installation guides. Chapter 3 contains the operation guide of the
software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.

Because the motherboard specifications and the BIOS software might be updated, the
content of this manual will be subject to change without notice. In case any modifica-
tions of this manual occur, the updated version will be available on ASRock’s website
without further notice. If you require technical support related to this motherboard,
please visit our website for specific information about the model you are using. You
may find the latest VGA cards and CPU support list on ASRock’s website as well.
ASRock website http://www.asrock.com.

1.1 Package Contents

• ASRock H97M Pro4 Motherboard (Micro ATX Form Factor)
• ASRock H97M Pro4 Quick Installation Guide
• ASRock H97M Pro4 Support CD
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x I/O Panel Shield

English

1
 1.2 Specifications

Platform • Micro ATX Form Factor

• All Solid Capacitor design
• High Density Glass Fabric PCB

th th th
CPU • Supports 5 Generation, New 4 and 4 Generation Intel®
TM
Core i7/i5/i3/Pentium®/Celeron® Processors (Socket 1150)
• Digi Power design
• 4 Power Phase design
• Supports Intel® Turbo Boost 2.0 Technology

Chipset • Intel® H97

• Supports Intel® Small Business Advantage 2.0

Memory • Dual Channel DDR3 Memory Technology

• 4 x DDR3 DIMM Slots
• Supports DDR3 1600/1333/1066 non-ECC, un-buffered
memory
• Max. capacity of system memory: 32GB (see CAUTION)
• Supports Intel® Extreme Memory Profile (XMP) 1.3 / 1.2

Expansion • 1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)

Slot • 1 x PCI Express 2.0 x16 Slot (PCIE2: x4 mode)
• 2 x PCI Slots
• Supports AMD Quad CrossFireXTM and CrossFireXTM

Graphics • Intel® HD Graphics Built-in Visuals and the VGA outputs can
be supported only with processors which are GPU integrated.
• Supports Intel® HD Graphics Built-in Visuals : Intel® Quick
Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD
Technology, Intel® InsiderTM, Intel® HD Graphics 4400/4600
• Pixel Shader 5.0, DirectX 11.1
• Max. shared memory 1792MB
English

• Three graphics output options: D-Sub, DVI-D and HDMI

• Supports Triple Monitor
• Supports HDMI with max. resolution up to 1920x1200 @
60Hz

2
 H97M Pro4

• Supports DVI-D with max. resolution up to 1920x1200 @

60Hz
• Supports D-Sub with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI Port (Compliant
HDMI monitor is required)
• Supports HDCP with DVI-D and HDMI Ports
• Supports Full HD 1080p Blu-ray (BD) playback with DVI-D
and HDMI Ports

Audio • 7.1 CH HD Audio with Content Protection (Realtek ALC892

Audio Codec)
• Premium Blu-ray Audio support
• Supports Surge Protection (ASRock Full Spike Protection)
• ELNA Audio Caps

LAN • Gigabit LAN 10/100/1000 Mb/s

• Giga PHY Intel® I218V
• Supports Intel® Remote Wake Technology
• Supports Wake-On-LAN
• Supports Lightning/ESD Protection (ASRock Full Spike
Protection)
• Supports Energy Efficient Ethernet 802.3az
• Supports PXE

Rear Panel • 1 x PS/2 Mouse/Keyboard Port

I/O • 1 x D-Sub Port
• 1 x DVI-D Port
• 1 x HDMI Port
• 1 x Optical SPDIF Out Port
• 2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full
Spike Protection))
• 4 x USB 3.0 Ports (Supports ESD Protection (ASRock Full
English

Spike Protection))
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Rear Speaker / Central / Bass / Line in /
Front Speaker / Microphone
3
 Storage • 6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,
RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology
13 and Intel Smart Response Technology), NCQ, AHCI and
Hot Plug

Connector • 1 x Print Port Header

• 1 x COM Port Header
• 1 x Chassis Intrusion Header
• 1 x TPM Header
• 2 x CPU Fan Connectors (1 x 4-pin, 1 x 3-pin)
• 2 x Chassis Fan Connectors (1 x 4-pin, 1 x 3-pin)
• 1 x Power Fan Connector (3-pin)
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector
• 1 x Front Panel Audio Connector
• 1 x Thunderbolt AIC Connector
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD
Protection (ASRock Full Spike Protection))
• 1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD
Protection (ASRock Full Spike Protection))

BIOS • 128Mb AMI UEFI Legal BIOS with multilingual GUI support
Feature • ACPI 1.1 Compliant wake up events
• SMBIOS 2.3.1 support
• CPU, DRAM, PCH 1.05V, PCH 1.5V Voltage multi-adjust-
ment

Hardware • CPU/Chassis temperature sensing

Monitor • CPU/Chassis/Power Fan Tachometer
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by
CPU temperature)
• CPU/Chassis Fan multi-speed control
• CASE OPEN detection
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore
English

OS • Microsoft® Windows® 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64-

bit / 7 32-bit / 7 64-bit

4
 H97M Pro4

Certifica- • FCC, CE, WHQL

tions • ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including adjust-
ing the setting in the BIOS, applying Untied Overclocking Technology, or using third-
party overclocking tools. Overclocking may affect your system’s stability, or even cause
damage to the components and devices of your system. It should be done at your own
risk and expense. We are not responsible for possible damage caused by overclocking.

Due to limitation, the actual memory size may be less than 4GB for the reservation
for system usage under Windows® 32-bit operating systems. Windows® 64-bit operat-
ing systems do not have such limitations. You can use ASRock XFast RAM to utilize
the memory that Windows® cannot use.

English

5
 1.3 Motherboard Layout
Keyboard/

B: USB1
T: USB0
USB 2.0
Mouse

Ps2

PWR_FAN1 CPU_FAN2 CPU_FAN1

ATX12V1
DVI1
VGA1

DDR3_A1 (64 bit, 240-pin module)

DDR3_B1 (64 bit, 240-pin module)

DDR3_B2 (64 bit, 240-pin module)

DDR3_A2 (64 bit, 240-pin module)
HDMI1

ATXPWR1
USB 3.0
T: USB2
B: USB3

USB 3.0
Top:
T: USB4 RJ-45
B: USB5

1
HD_AUDIO1
Central/Bass
Top:

CHA_FAN2
REAR SPK
Center:
SPDIF
Optical
Bottom:

Front USB 3.0

CLRCMOS1
1
CMOS

USB10_11
Battery
MIC IN
Bottom:

LINE IN
Top:
FRONT
Center:

Audio
CODEC

1
PCIE1
SATA_4_5
PCI Express 3.0 H97M Pro4
PCI1
SATA_2_3

Intel
H97
SATA_0_1

PCI2
RoHS
Super
I/O
PCIE2
128Mb
COM1
1 CI1
USB6_7 USB8_9 PLED PWRBTN
BIOS
LPT1 TPMS1 CHA_FAN1
TB1
1 SPEAKER1
1
1 1 1 HDLED RESET 1
1 PANEL1
English

6
 H97M Pro4

No. Description
1 ATX 12V Power Connector (ATX12V1)
2 Power Fan Connector (PWR_FAN1)
3 CPU Fan Connector (CPU_FAN2)
4 CPU Fan Connector (CPU_FAN1)
5 2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1)
6 2 x 240-pin DDR3 DIMM Slots (DDR3_A2, DDR3_B2)
7 ATX Power Connector (ATXPWR1)
8 USB 3.0 Header (USB10_11)
9 SATA3 Connector (SATA_4)
10 SATA3 Connector (SATA_5)
11 SATA3 Connector (SATA_2)
12 SATA3 Connector (SATA_3)
13 SATA3 Connector (SATA_1)
14 SATA3 Connector (SATA_0)
15 Chassis Speaker Header (SPEAKER1)
16 System Panel Header (PANEL1)
17 Chassis Fan Connector (CHA_FAN1)
18 Thunderbolt AIC Connector (TB1)
19 USB 2.0 Header (USB8_9)
20 USB 2.0 Header (USB6_7)
21 TPM Header (TPMS1)
22 Chassis Intrusion Header (CI1)
23 Print Port Header (LPT1)
24 COM Port Header (COM1)
25 Chassis Fan Connector (CHA_FAN2)
26 Front Panel Audio Header (HD_AUDIO1)
27 Clear CMOS Jumper (CLRCMOS1)
English

7
 1.4 I/O Panel
4 6
1 2 3 5 7

14 13 12 11 10 9 8

No. Description No. Description

1 USB 2.0 Ports (USB01) 8 Microphone (Pink)
2 D-Sub Port 9 Optical SPDIF Out Port
3 LAN RJ-45 Port* 10 USB 3.0 Ports (USB45)
4 Central / Bass (Orange) 11 USB 3.0 Ports (USB23)
5 Rear Speaker (Black) 12 HDMI Port
6 Line In (Light Blue) 13 DVI-D Port
7 Front Speaker (Lime)** 14 PS/2 Mouse/Keyboard Port
English

8
 H97M Pro4

* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

** If you use a 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below
for connection details in accordance with the type of speaker you use.

Audio Output Front Speaker Rear Speaker Central / Bass Line In

Channels (No. 7) (No. 5) (No. 4) (No. 6)
2 V -- -- --
4 V V -- --
6 V V V --
8 V V V V

To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find the “Mixer” tool
on your system. Please select “Mixer ToolBox” , click “Enable playback multi-
streaming”, and click “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are
allowed to select “Realtek HDA Primary output” to use the Rear Speaker, Central/
Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use the front
panel audio.
English

9
 Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard,
study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
English

10
 H97M Pro4

2.1 Installing the CPU

1. Before you insert the 1150-Pin CPU into the socket, please check if the PnP cap is on
the socket, if the CPU surface is unclean, or if there are any bent pins in the socket.
Do not force to insert the CPU into the socket if above situation is found. Otherwise,
the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.

English

11
4

5
3

12
English
 H97M Pro4

Please save and replace the cover if the processor is removed. The cover must be placed
if you wish to return the motherboard for after service.

English

13
 2.2 Installing the CPU Fan and Heatsink

1 2

N
FA
U_
CP
English

14
 H97M Pro4

2.3 Installing Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots,
and supports Dual Channel Memory Technology.

1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR3 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot;
otherwise, this motherboard and DIMM may be damaged.

Dual Channel Memory Configuration

Priority DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2

1 Populated Populated
2 Populated Populated
3 Populated Populated Populated Populated

The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.

English

15
 3
2
1

16
English
 H97M Pro4

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 2 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.

PCI slots:

The PCI1 and PCI2 slots are used to install expansion cards that have 32-bit PCI
interface.

PCIe slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE2 (PCIe 2.0 x16 slot) is used for PCI Express x4 lane width graphics
cards.

PCIe Slot Configurations

PCIE1 PCIE2

Single Graphics Card x16 N/A

Two Graphics Cards in

x16 x4
CrossFireXTM Mode

For a better thermal environment, please connect a chassis fan to the motherboard’s
chassis fan connector (CHA_FAN1 or CHA_FAN2) when using multiple graphics
cards.
English

17
 2.5 Jumpers Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.

Clear CMOS Jumper

(CLRCMOS1)
(see p.6, No. 27) Default Clear CMOS

CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn off the computer and unplug the power
cord from the power supply. After waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear
the CMOS right after you update the BIOS. If you need to clear the CMOS when
you just finish updating the BIOS, you must boot up the system first, and then shut
it down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default profile will be cleared only if the CMOS battery is
removed.

If you clear the CMOS, the case open may be detected. Please adjust the BIOS option
“Clear Status” to clear the record of previous chassis intrusion status.
English

18
 H97M Pro4

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.

System Panel Header Connect the power

(9-pin PANEL1) switch, reset switch and
(see p.6, No. 16) system status indicator on
the chassis to this header
according to the pin
assignments below. Note
the positive and negative
pins before connecting
the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may configure the way to
turn off your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset switch to restart
the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when
the system is operating. The LED keeps blinking when the system is in S1/S3 sleep state.
The LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on when
the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists
of power switch, reset switch, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
English

19
 Serial ATA3 Connectors These six SATA3

SATA_5
SATA_4
(SATA_0: connectors support SATA
see p.6, No. 14) data cables for internal
(SATA_1: storage devices with up to

SATA_3
SATA_2
see p.6, No. 13) 6.0 Gb/s data transfer rate.
(SATA_2:
see p.6, No. 11)

SATA_1
SATA_0
(SATA_3:
see p.6, No. 12)
(SATA_4:
see p.6, No. 9)
(SATA_5:
see p.6, No. 10)

USB 2.0 Headers Besides two USB 2.0 ports

USB_PWR
(9-pin USB6_7) P-
P+ on the I/O panel, there
GND
(see p.6, No. 20) DUMMY are two headers on this
(9-pin USB8_9) 1
motherboard. Each USB
(see p.6, No. 19) P+
GND
2.0 header can support
P-
USB_PWR two ports.

USB 3.0 Header Vbus Besides four USB 3.0

Vbus IntA_PB_SSRX-
(19-pin USB10_11) IntA_PA_SSRX- IntA_PB_SSRX+ ports on the I/O panel,
IntA_PA_SSRX+ GND
(see p.6, No. 8) GND IntA_PB_SSTX- there is one header on this
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+ GND motherboard. Each USB
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+ 3.0 header can support
IntA_PA_D+ Dummy
1 two ports.

Front Panel Audio Header GND

PRESENCE#
This header is for
(9-pin HD_AUDIO1) connecting audio devices
MIC_RET
OUT_RET

(see p.6, No. 26) to the front audio panel.

1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
English

20
 H97M Pro4

1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must
support HDA to function correctly. Please follow the instructions in our manual and
chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.

Chassis Speaker Header DUMMY SPEAKER Please connect the chassis

(4-pin SPEAKER1) 1 speaker to this header.
(see p.6, No. 15) +5V DUMMY

Chassis and Power Fan FAN_SPEED_CONTROL Please connect fan cables

FAN_SPEED
Connectors +12V
GND
to the fan connectors and
(4-pin CHA_FAN1) match the black wire to
(see p.6, No. 17) 1 2 3 4 the ground pin.

(3-pin CHA_FAN2) GND

FAN_VOLTAGE

(see p.6, No. 25) FAN_SPEED

(3-pin PWR_FAN1) FAN_SPEED

+12V
(see p.6, No. 2) GND
English

21
 CPU Fan Connectors FAN_SPEED_CONTROL This motherboard pro-
FAN_SPEED
(4-pin CPU_FAN1) +12V
GND
vides a 4-Pin CPU fan
(see p.6, No. 4) (Quiet Fan) connector.
1 2 3 4 If you plan to connect a
(3-pin CPU_FAN2) FAN_SPEED 3-Pin CPU fan, please
FAN_VOLTAGE
(see p.6, No. 3) GND connect it to Pin 1-3.

ATX Power Connector 12 24 This motherboard pro-

(24-pin ATXPWR1) vides a 24-pin ATX power
(see p.6, No. 7) connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
1 13 13.

ATX 12V Power 8 5

This motherboard pro-
Connector vides an 8-pin ATX 12V
(8-pin ATX12V1) 4 1 power connector. To use a
(see p.6, No. 1) 4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.

Thunderbolt AIC Please connect a 5-pin signal

Connector cable (GPIO cable) to this
(5-pin TB1) connector when you install
(see p.6, No. 18) a ThunderboltTM add-in card
(AIC).

Serial Port Header RRXD1

DDTR#1
This COM1 header
(9-pin COM1) supports a serial port
DDSR#1
CCTS#1

(see p.6, No. 24) module.

1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
English

22
 H97M Pro4

Chassis Intrusion Header 1

This motherboard
(2-pin CI1) GND supports CASE OPEN
Signal
(see p.6, No. 22) detection feature that
detects if the chassis cove
has been removed. This
feature requires a chassis
with chassis intrusion
detection design.

TPM Header This connector supports

(17-pin TPMS1) Trusted Platform Module
(see p.6, No. 21) 1 (TPM) system, which can
securely store keys, digital
certificates, passwords,
and data. A TPM system
also helps enhance
network security, protects
digital identities, and
ensures platform integrity.

Print Port Header AFD#

ERROR#
This is an interface
(25-pin LPT1) for print port cable
PINIT#
SLIN# GND

(see p.6, No. 23) 1

that allows convenient
SPD7
SPD6 ACK#
SPD5 BUSY
connection of printer
SPD4 PE
SPD3
SPD2
SLCT
devices.
SPD1
SPD0
STB# English

23
 2.7 CrossFireXTM and Quad CrossFireXTM Operation Guide
This motherboard supports CrossFireXTM and Quad CrossFireXTM that allows you to
install up to two identical PCI Express x16 graphics cards. Currently CrossFireXTM
and Quad CrossFireXTM are supported with Windows® 7 / 7 64-bit / 8 / 8 64-bit / 8.1
/ 8.1 64-bit OS.

1. You should only use identical CrossFireXTM-ready graphics cards that are AMD
certified.
2. Make sure that your graphics card driver supports AMD CrossFireXTM technology.
Download the drivers from the AMD’s website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certified PSU. Please
refer to the AMD’s website for details.
4. If you pair a 12-pipe CrossFireXTM Edition card with a 16-pipe card, both cards will
operate as 12-pipe cards while in CrossFireXTM mode.
5. Different CrossFireXTM cards may require different methods to enable CrossFi-
reXTM. Please refer to AMD graphics card manuals for detailed installation guide.

2.7.1 Installing Two CrossFireXTM-Ready Graphics Cards

Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE2 slot.
Make sure that the cards are properly
seated on the slots.

Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
CrossFire Bridge Interconnects on the top of the graphics
cards. (The CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
English

details.)

24
 H97M Pro4

Step 3
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connec-
tor of the graphics card that is inserted to
PCIE1 slot.

English

25
 2.7.2 Driver Installation and Setup

Step 1
Power on your computer and boot into OS.

Step 2
Remove the AMD drivers if you have any VGA drivers installed in your system.

The Catalyst Uninstaller is an optional download. We recommend using this utility to

uninstall any previously installed Catalyst drivers prior to installation. Please check
AMD’s website for AMD driver updates.

Step 3
Install the required drivers and CATALYST Control Center then restart your
computer. Please check AMD’s website for details.

Step 4
Double-click the AMD Catalyst Control
AMD Catalyst Control Center Center icon in the Windows® system tray.

Step 5
In the left pane, click Performance and
then AMD CrossFireXTM . Then select
Enable AMD CrossFireX and click Apply.
Select the GPU number according to your
graphics card and click Apply.
English

26
 H97M Pro4

Chapter 3 Software and Utilities Operation

3.1 Installing Drivers
The Support CD that comes with the motherboard contains necessary drivers and
useful utilities that enhance the motherboard’s features.

Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD
automatically displays the Main Menu if “AUTORUN” is enabled in your computer.
If the Main Menu does not appear automatically, locate and double click on the file
“ASRSETUP.EXE” in the Support CD to display the menu.

Drivers Menu
The drivers compatible to your system will be auto-detected and listed on the
support CD driver page. Please click Install All or follow the order from top to
bottom to install those required drivers. Therefore, the drivers you install can work
properly.

Utilities Menu
The Utilities Menu shows the application software that the motherboard supports.
Click on a specific item then follow the installation wizard to install it.

To improve Windows 7 compatibility, please download and install the following hot
fix provided by Microsoft.
“KB2720599”: http://support.microsoft.com/kb/2720599/en-us

English

27
 3.2 A-Tuning
A-Tuning is ASRock’s multi purpose software suite with a new interface, more new
features and improved utilities, including XFast RAM, Dehumidifier, Good Night
LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more.

3.2.1 Installing A-Tuning

When you install the all-in-one driver to your system from ASRock’s support CD,
A-Tuning will be auto-installed as well. After the installation, you will find the icon
“A-Tuning“ on your desktop. Double-click the “A-Tuning“ icon, A-Tuning
main menu will pop up.

3.2.2 Using A-Tuning

There are six sections in A-Tuning main menu: Operation Mode, Tools, OC
Tweaker, System Info, Live Update, Tech Service and Settings.

Operation Mode
Choose an operation mode for your computer.
English

28
 H97M Pro4

Tools
Various tools and utilities.

XFast RAM
Boost the system’s performance and extend the HDD’s or SDD’s lifespan! Create a
hidden partition, then assign which files should be stored in the RAM drive.

XFast LAN
Boost the speed of your internet connection! Select a specific mode for making the
designated program's priority highest.

Fast Boot
Fast Boot minimizes your computer's boot time. Please note that Ultra Fast mode
is only supported by Windows 8.1/8 and the VBIOS must support UEFI GOP if you
are using an external graphics card.

OMG
Schedule the starting and ending hours of Internet access granted to other users.
Place X marks on the time table to disable the Internet.

Good Night LED

English

Switch off the Power/HDD LEDs when the system is on, and automatically switch
off the Power and Keyboard LEDs when the system enters into Standby/Hibernation
mode.

29
 FAN-Tastic Tuning
Configure up to five different fan speeds using the graph. The fans will automatically
shift to the next speed level when the assigned temperature is met.

Dehumidifier
Prevent motherboard damages due to dampness. Enable this function and
configure the period of time until the computer powers on, and the duration of the
dehumidifying process.

USB Key
Plug in the USB Key and let your computer log in to windows automatically!

OC DNA
OC DNA is an unique software which helps to save your OC settings as a profile.
Then you can send this OC setting profile to the friends.

Disk Health Report

Disk Health Report is a hard disk health monitoring utility that displays detailed
HDD information, such as hard disk model, serial number, firmware, power on
count, power on hours, S.M.A.R.T. values, current temperature, etc. HDD, SSD
and optical disk drives are all supported. The health status block displays Good
(in green color), Caution (in yellow color) or Bad (in red color). Click on the health
status icon to configure settings for an alert to be triggered.
English

30
 H97M Pro4

OC Tweaker
Configurations for overclocking the system.

System Info
View information about the system.
*The System Browser tab may not appear for certain models.

English

31
 Live Update
Check for newer versions of BIOS or drivers.

Tech Service
Contact Tech Service if you have problems with your computer. Please leave your
contact information along with details of the problem.
English

32
 H97M Pro4

Settings
Configure ASRock A-Tuning. Click to select "Auto run at Windows Startup" if you
want A-Tuning to be launched when you start up the Windows operating system.

English

33
 3.3 Intel® Rapid Start Technology
Intel® Rapid Start Technology enables your system to wake up faster from deep
sleep, saving time and power consumption. Feel secure to know that your system
will resume to working condition even if an unexpected power loss happens while
the PC is in sleep mode.

3.3.1 System Requirements

• Confirm whether your motherboard supports this feature.

• Operating system: Microsoft Windows 8.1/8/7 (32- or 64-bit edition)

• Set the SATA mode to AHCI. If Windows 8.1/8/7 is already installed under
IDE mode, directly changing the SATA mode to AHCI may cause Windows
8/7 to crash while booting. If your system is not in AHCI mode, please follow
the instructions below.

There are certain risks. Please backup any important data before operating to avoid
loss.

1. Press Win + R simultaneously in Windows 8/7, type "Regedit" into the word
box then click OK.

2. Enter into HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\

msahci in Windows Registry Editor. Double click on the value Start and
change the value from 3 into 0. Click on OK.
English

34
 H97M Pro4

3. Exit the Registry Editor window and restart the computer.

4. Press F2 to enter BIOS, then go to Advanced ‐> Storage Configuration and
change SATA Mode to AHCI. Press F10 to save changes and exit.
5. Enter Windows 8/7. Windows will discover the new device and install AHCI
drivers automatically.

3.3.2 Setup Guide

Configuring Rapid Start
Step 1
Run ASRock Rapid Start utility from Start -> All Programs -> ASRock Utility.

Step 2
If you have more than one hard drives in your system, you must select one, then
choose the Partition Size desired for your hidden partition and click on Create. The
system will automatically create a hidden partition according to your settings. If
there are SSD’s installed into your system, it is recommended to create the partition
on the SSD.
English

35
 Step 3
When prompted to restart after the setup, click Yes to reboot.

Step 4
Double-click the Intel® Rapid Start Technology Manager icon in the Windows
system tray.
English

36
 H97M Pro4

Step 5
Make sure Rapid Start is on. Drag the slider to configure the time. For example, if
the timer value is set to ten minutes, the system will enable Rapid Start mode after
entering sleep state for ten minutes. If the timer is set to 0 minutes, Windows will
immediately enable Rapid Start mode as it enters sleep state.

Using Rapid Start

1. You may shut down the computer without terminating the applications or files
you are executing currently. Click on Windows Start ‐> the arrow next to Shut
down, and click on Sleep.
English

2. Windows system will enter sleep state.

3. According to your settings in Rapid Start Technology Manager, the system

will automatically wake up and enable Rapid Start mode after entering sleep

37
 state for a period of time. The power of the computer in Rapid Start mode can
be cut off, it will not cause data loss of the programs or files you were executing
before entering sleep state.

4. When you wish to continue to use the computer just hit the power button, the
system will rapidly return to Windows, the programs and files which you were
using before entering sleep state will be accessible immediately.
English

38
 H97M Pro4

3.4 Intel® Smart Connect Technology

Intel® Smart Connect Technology is a feature that periodically wakes your computer
from Windows® sleep state to refresh email or social networking applications. It
saves your waiting time and keeps the content always up-to-date.

3.4.1 System Requirements

• Confirm whether your motherboard supports this feature.

• Operating system: Microsoft Windows 8.1/8/7 (32- or 64-bit edition)

• Set the SATA mode to AHCI. If Windows 8.1/8/7 is already installed under
IDE mode, directly changing the SATA mode to AHCI may cause Windows
8/7 to crash while booting. If your system is not in AHCI mode, please follow
the instructions below.

There are certain risks. Please backup any important data before operating to avoid
loss.

1. Press Win + R simultaneously in Windows 8/7, type "Regedit" into the word
box then click OK.

2. Enter into HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\

msahci in Windows Registry Editor. Double click on the value Start and
change the value from 3 into 0. Click on OK.
English

39
 3.4.2 Setup Guide
Installing ASRock Smart Connect Utility
Step 1
Install ASRock Smart Connect Utility, which is located in the folder at the following
path of the Support CD: \ ASRock Utility > Smart Connect.

Step 2
Once installed, run ASRock Smart Connect from your desktop or go to Windows
Start -> All Programs -> ASRock Utility.
English

40
 H97M Pro4

Step 3
Click the Add button. Take Foxmail as an example, add Foxmail to the Application
list.

Step 4
Select Foxmail from the Application List, then click the arrow pointing right to add
this application to the Smart Connect List.

Step 5
English

Click Apply to enable Smart Connect.

41
 Step 6
Double-click the Intel® Smart Connect Technology Manager icon in the
Windows system tray.

Step 7
Drag the slider to configure how often the system will connect to the network to
download updates. Shorter durations will provide more frequent updates, but may
cause more power consumption.

Using Smart Connect

1. Keep the applications which you wish to connect to the internet and receive
updates while the system is in sleep state running. Foxmail for instance, keep
Foxmail running.

2. Click on Windows Start -> the arrow next to Shut down, and click on Sleep.
English

3. Windows system will enter sleep state.

42
 H97M Pro4

4. The system will wake up from sleep state periodically, and then start to update
Foxmail. The screen will not display anything so the computer can maintain
minimum power usage. Afterwards, the system will automatically return to
sleep state again.

5. Upon waking up the system, you will find the new mail that were sent to you
during sleep state are already updated and ready to be read in Foxmail.

English

43
 3.5 ASRock APP Shop
The ASRock APP Shop is an online store for purchasing and downloading software
applications for your ASRock computer. You can install various apps and support
utilities quickly and easily, and optimize your system and keep your motherboard
up to date simply with a few clicks.

Double-click on your desktop to access ASRock APP Shop utility.

*You need to be connected to the Internet to download apps from the ASRock APP Shop.

3.5.1 UI Overview
Category Panel Hot News

Information Panel

Category Panel: The category panel contains several category tabs or buttons that
when selected the information panel below displays the relative information.

Information Panel: The information panel in the center displays data about the
currently selected category and allows users to perform job-related tasks.

Hot News: The hot news section displays the various latest news. Click on the image
to visit the website of the selected news and know more.
English

44
 H97M Pro4

3.5.2 Apps
When the "Apps" tab is selected, you will see all the available apps on screen for you
to download.

Installing an App
Step 1
Find the app you want to install.

The most recommended app appears on the left side of the screen. The other various
apps are shown on the right. Please scroll up and down to see more apps listed.

You can check the price of the app and whether you have already intalled it or not.

- The red icon displays the price or "Free" if the app is free of charge.

- The green "Installed" icon means the app is installed on your computer.

Step 2
Click on the app icon to see more details about the selected app.
English

45
 Step 3

If you want to install the app, click on the red icon to start downloading.

Step 4
When installation completes, you can find the green "Installed" icon appears on the
upper right corner.

To uninstall it, simply click on the trash can icon .

English

*The trash icon may not appear for certain apps.

46
 H97M Pro4

Upgrading an App
You can only upgrade the apps you have already installed. When there is an
available new version for your app, you will find the mark of "New Version"
appears below the installed app icon.

Step 1
Click on the app icon to see more details.

Step 2

Click on the yellow icon to start upgrading.

English

47
 3.5.3 BIOS & Drivers

Installing BIOS or Drivers

When the "BIOS & Drivers" tab is selected, you will see a list of recommended or
critical updates for the BIOS or drivers. Please update them all soon.

Step 1

Please check the item information before update. Click on to see more details.
Step 2

Click to select one or more items you want to update.

Step 3

Click Update to start the update process.

English

48
 H97M Pro4

3.5.4 Setting
In the "Setting" page, you can change the language, select the server location, and
determine if you want to automatically run the ASRock APP Shop on Windows
startup.

English

49
 3.6 Start8
For those Windows 8 users who miss the Start Menu, Start8 is an ideal solution that
brings back the familiar Start Menu along with added customizations for greater
efficiency.

3.6.1 Installing Start8

Install Start8, which is located in the folder at the following path of the Support CD:
\ ASRock Utility > Start8.

3.6.2 Configuring Start8

Style

Select between the Windows 7 style and Windows 8 style Start Menu. Then select
the theme of the Start Menu and customize the style of the Start icon.
English

50
 H97M Pro4

Configure

Configure provides configuration options, including icon sizes, which shortcuts you
want Start Menu to display, quick access to recently used apps, the functionality of
the power button, and more.

Control

English

51
 Control lets you configure what a click on the start button or a press on the
Windows key does.

Desktop

Desktop allows you to disable the hot corners when you are working on the desktop.
It also lets you choose whether or not the system boots directly into desktop mode
and bypass the Metro user interface.

About
Displays information about Start8.
English

52
 H97M Pro4

Chapter 4 UEFI SETUP UTILITY

4.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
after you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY after
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system off
and then back on.

Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.

4.1.1 UEFI Menu Bar

The top of the screen has a menu bar with the following selections:

Main For setting system time/date information

OC Tweaker For overclocking configurations

Advanced For advanced system configurations

Tool Useful tools

H/W Monitor Displays current hardware status

Boot For configuring boot settings and boot priority

Security For security settings

English

Exit Exit the current screen or the UEFI Setup Utility

53
 4.1.2 Navigation Keys
Use < > key or < > key to choose among the selections on the menu bar, and
use < > key or < > key to move the cursor up or down to select items, then
press <Enter> to get into the sub screen. You can also use the mouse to click your
required item.

Please check the following table for the descriptions of each navigation key.

Navigation Key(s) Description

+ / - To change option for the selected items

<Tab> Switch to next function

<PGUP> Go to the previous page

<PGDN> Go to the next page

<HOME> Go to the top of the screen

<END> Go to the bottom of the screen

<F1> To display the General Help Screen

<F7> Discard changes and exit the SETUP UTILITY

<F9> Load optimal default values for all the settings

<F10> Save changes and exit the SETUP UTILITY

<F12> Print screen

<ESC> Jump to the Exit Screen or exit the current screen

English

54
 H97M Pro4

4.2 Main Screen

When you enter the UEFI SETUP UTILITY, the Main screen will appear and
display the system overview.

Favorite
Display your collection of BIOS items. Press F5 to add/remove your favorite items.

Active Page on Entry

Select the default page when entering the UEFI setup utility.

Full HD UEFI
When [Auto] is selected, the resolution will be set to 1920 x 1080 if the monitor
supports Full HD resolution. If the monitor does not support Full HD resolution,
then the resolution will be set to 1024 x 768. When [Disable] is selected, the
resolution will be set to 1024 x 768 directly.

UEFI Guide
UEFI Guide is a quick tutorial for ASRock's UEFI setup Utility. You may abort the
tutorial by pressing "ESC".
English

55
 4.3 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.

Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.

Advanced Turbo
You can use this option to increase your system performance. This option appears only
when your CPU supports this function. This option appears only when you adopt K-Series
CPU.

Non-Z OC
Non-Z OC allows users with a K-Series Haswell processor to overclock their non Z97
chipset motherboards.

Load Optimized CPU OC Setting

You can use this option to load optimized CPU overclocking setting. Please note that
English

overclocking may cause damage to your CPU and motherboard. It should be done at your
own risk and expense. This option appears only when you adopt K-Series CPU.

56
 H97M Pro4

Load Optimized GPU OC Setting

You can use this option to load optimized GPU overclocking setting. Please note that
overclocking may cause damage to your GPU and motherboard. It should be done at your
own risk and expense. This option appears only when you adopt K-Series CPU.

CPU Configuration
CPU Ratio
The CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the CPU Ratio will increase the internal CPU clock speed without
affecting the clock speed of other components.

CPU Cache Ratio

The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU
Ratio.

BCLK/PCIE Frequency
The CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the BCLK will increase the internal CPU clock speed but also affect the
clock speed of other components.

CPU OC Fixed Mode

CPU OC fix mode allows you to keep the max CPU ratio as your setting without
throttling. Please note that overclocking may cause damage to your CPU and
motherboard. It should be done at your own risk and expense.

Intel SpeedStep Technology

Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.

Intel Turbo Boost Technology

Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.

Filter PLL Frequency

CPU BCLK Filter Frequency. Choose 1.6 for better overclocking capabilities.
English

Long Duration Power Limit

Configure Package Power Limit 1 in watts. When the limit is exceeded, the CPU
ratio will be lowered after a period of time. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.

57
 Long Duration Maintained
Configure the period of time until the CPU ratio is lowered when the Long
Duration Power Limit is exceeded.

Short Duration Power Limit

Configure Package Power Limit 2 in watts. When the limit is exceeded, the CPU
ratio will be lowered immediately. A lower limit can protect the CPU and save
power, while a higher limit may improve performance.

Primary Plane Current Limit

Configure the current limit of the CPU under Turbo Mode in ampere. A lower
limit can protect the CPU and save power, while a higher limit may improve
performance.

GT Frequency
Configure the frequency of the integrated GPU.

GT Voltage Mode
Auto: For optimized settings.

Adaptive: Add voltage to the integrated GPU when the system is under heavy load.

Override: The voltage is fixed.

GT Adaptive Voltage
Configure the voltage added to the integrated GPU when the system is under heavy
load.

GT Voltage Offset
Configure the fixed voltage added to the integrated GPU.

DRAM Timing Configuration

Load XMP Setting
Load XMP settings to overclock the DDR3 memory and perform beyond standard
specifications.

DRAM Reference Clock

English

Select Auto for optimized settings.

58
 H97M Pro4

DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.

DRAM Performance Mode

Choose high performance mode to increase memory performance. Use default
settings for better system stability.

DRAM Configuration

DRAM Tweaker
Fine tune the DRAM settings by leaving marks in checkboxes. Click OK to confirm and
apply your new settings.

CAS# Latency (tCL)

The time between sending a column address to the memory and the beginning of the data
in response.

RAS# to CAS# Delay (tRCD)

English

The number of clock cycles required between the opening of a row of memory and
accessing columns within it.

59
 Row Precharge Time (tRP)
The number of clock cycles required between the issuing of the precharge command
and opening the next row.

RAS# Active Time (tRAS)

The number of clock cycles required between a bank active command and issuing the
precharge command.

Command Rate (CR)

The delay between when a memory chip is selected and when the first active command can
be issued.

Write Recovery Time (tWR)

The amount of delay that must elapse after the completion of a valid write operation,
before an active bank can be precharged.

Refresh Cycle Time (tRFC)

The number of clocks from a Refresh command until the first Activate command to
the same rank.

RAS to RAS Delay (tRRD)

The number of clocks between two rows activated in different banks of the same
rank.

Write to Read Delay (tWTR)

The number of clocks between the last valid write operation and the next read
command to the same internal bank.

Read to Precharge (tRTP)

The number of clocks that are inserted between a read command to a row pre-
charge command to the same rank.

Four Activate Window (tFAW)

The time window in which four activates are allowed the same rank.

CAS Write Latency (tCWL)

English

Configure CAS Write Latency.

tREFI
Configure refresh cycles at an average periodic interval.

60
 H97M Pro4

tCKE
Configure the period of time the DDR3 initiates a minimum of one refresh
command internally once it enters Self-Refresh mode.

tRDRD
Configure between module read to read delay.

tRDRDDR
Configure between module read to read delay from different ranks.

tRDRDDD
Use this to change DRAM tRWSR Auto/Manual settings. The default is [Auto].

tWRRD
Configure between module write to read delay.

tWRRDDR
Configure between module write to read delay from different ranks.

tWRRDDD
Use this to change DRAM tRRSR Auto/Manual settings. The default is [Auto].

Configure between module write to read delay from different DIMMs.

tWRWR
Configure between module write to write delay.

tWRWRDR
Configure between module write to write delay from different ranks.

tWRWRDD
Configure between module write to write delay from different DIMMs.

tRDWR
Configure between module read to write delay.

tRDWRDR
Configure between module read to write delay from different ranks.
English

tRDWRDD
Configure between module read to write delay from different DIMMs.

61
 RTL (CHA)
Configure round trip latency for channel A.

RTL (CHB)
Configure round trip latency for channel B.

IO-L (CHA)
Configure IO latency for channel A.

IO-L (CHB)
Configure IO latency for channel B.

ODT WR (CHA)
Configure the memory on die termination resistors' WR for channel A.

ODT WR (CHB)
Configure the memory on die termination resistors' WR for channel B.

ODT NOM (CHA)

Use this to change ODT (CHA) Auto/Manual settings. The default is [Auto].

ODT NOM (CHB)

Use this to change ODT (CHB) Auto/Manual settings. The default is [Auto].

Command Tri State

Enable for DRAM power saving.

MRC Fast Boot

Enable Memory Fast Boot to skip DRAM memory training for booting faster.

DIMM Exit Mode

Select Slow Exit to reduce power consumption, or Fast Exit for better performance.

FIVR Configuration
FIVR Switch Frequency Signature
Select whether to boost or lower the FIVR Switch Frequency.
English

FIVR Switch Frequency Offset

Configure the percentage of frequency boost or deduction.

62
 H97M Pro4

Vcore Override Voltage

Add voltage to the Vcore when the system is under heavy load.

Vcore Voltage Additional Offset

Configure the dynamic Vcore voltage added to the Vcore.

CPU Cache Override Voltage

Add voltage to the CPU Cache when the system is under heavy load.

CPU Cache Voltage Offset

Configure the voltage for the CPU Cache. Setting the voltage higher may increase
system stability when overclocking.

System Agent Voltage Offset

Configure the voltage for the System Agent. Setting the voltage higher may increase system
stability when overclocking.

CPU Analog IO Voltage Offset

CPU I/O Analog Voltage.

CPU Digital IO Voltage Offset

CPU I/O Digital Voltage.

CPU Integrated VR Faults

Disable FIVR Faults to raise the threshold to trigger CPU over current protection
and over voltage protection for better overclocking capabilities.

CPU Integrated VR Efficiency Mode

Enable FIVR Efficiency Management for power saving. Disable for better
performance and overclocking capabilities.

Voltage Configuration
Power Saving Mode
Enable Power Saving Mode to reduce power consumption.

CPU Input Voltage

English

Configure the voltage for the CPU.

63
 CPU Load-Line Calibration
CPU Load-Line Calibration helps prevent CPU voltage droop when the system is
under heavy load.

DRAM Voltage
Use this to configure DRAM Voltage.

PCH 1.05V Voltage

Chipset 1.05V Voltage. Use default settings for best performance.

PCH 1.5V Voltage

I/O 1.5V Voltage. Use default settings for best performance.
English

64
 H97M Pro4

4.4 Advanced Screen

In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, Storage Configuration, Intel® Rapid Start
Technology, Intel® Smart Connect Technology, Intel® Thunderbolt™ , Super IO Con-
figuration, ACPI Configuration, USB Configuration and Trusted Computing.

Setting wrong values in this section may cause the system to malfunction.

English

65
 4.4.1 CPU Configuration

Active Processor Cores

Select the number of cores to enable in each processor package.

CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C3, C6
and C7 all enabled for better power saving.

Enhanced Halt State (C1E)

Enable Enhanced Halt State (C1E) for lower power consumption.

CPU C3 State Support

Enable C3 sleep state for lower power consumption.

CPU C6 State Support

Enable C6 deep sleep state for lower power consumption.

CPU C7 State Support

Enable C7 deep sleep state for lower power consumption.
English

Package C State Support

Enable CPU, PCIe, Memory, Graphics C State Support for power saving.

66
 H97M Pro4

CPU Thermal Throttling

Enable CPU internal thermal control mechanisms to keep the CPU from overheat-
ing.

No-Execute Memory Protection

Processors with No-Execution Memory Protection Technology may prevent certain
classes of malicious buffer overflow attacks.

Intel Virtualization Technology

Intel Virtualization Technology allows a platform to run multiple operating systems
and applications in independent partitions, so that one computer system can
function as multiple virtual systems.

Hardware Prefetcher
Automatically prefetch data and code for the processor. Enable for better
performance.

Adjacent Cache Line Prefetch

Automatically prefetch the subsequent cache line while retrieving the currently
requested cache line. Enable for better performance.

English

67
 4.4.2 Chipset Configuration

Primary Graphics Adapter

Select a primary VGA.

VT-d
Intel® Virtualization Technology for Directed I/O helps your virtual machine
monitor better utilize hardware by improving application compatibility and
reliability, and providing additional levels of manageability, security, isolation, and
I/O performance.

PCIE1 Link Speed

Select the link speed for PCIE1.

Share Memory
Configure the size of memory that is allocated to the integrated graphics processor
when the system boots up.

IGPU Multi-Monitor
Select disable to disable the integrated graphics when an external graphics card is
English

installed. Select enable to keep the integrated graphics enabled at all times.

Render Standby
Power down the render unit when the GPU is idle for lower power consumption.

68
 H97M Pro4

Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.

Front Panel
Enable/disable front panel HD audio.

On/Off Play
With ASRock On/Off Play users can connect their portable audio devices, such
as an MP3 player or a mobile phone to the PC and listen to music through the
computer's speakers even when the computer is turned off.

Onboard HDMI HD Audio

Enable audio for the onboard digital outputs.

Onboard LAN
Enable or disable the onboard network interface controller.

Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.

Restore on AC/Power Loss

Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.

Good Night LED

By enabling Good Night LED, the Power/HDD LEDs will be switched off when the
system is on. It will also automatically switch off the Power and Keyboard LEDs
when the system enters into Standby/Hibernation mode.
English

69
 4.4.3 Storage Configuration

SATA Controller(s)
Enable/disable the SATA controllers.

SATA Mode Selection

IDE: For better compatibility.

AHCI: Supports new features that improve performance.

RAID: Combine multiple disk drives into a logical unit.

AHCI (Advanced Host Controller Interface) supports NCQ and other new features
that will improve SATA disk performance but IDE mode does not have these advan-
tages.

SATA Aggressive Link Power Management

SATA Aggressive Link Power Management allows SATA devices to enter a low
power state during periods of inactivity to save power. It is only supported by AHCI
mode.
English

70
 H97M Pro4

Hard Disk S.M.A.R.T.

S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a
monitoring system for computer hard disk drives to detect and report on various
indicators of reliability.

English

71
 4.4.4 Intel® Rapid Start Technology

Intel® Rapid Start Technology

Intel® Rapid Start Technology is a new zero power hibernation mode which allows
users to resume in just 5-6 seconds.
English

72
 H97M Pro4

4.4.5 Intel® Smart Connect Technology

Intel® Smart Connect Technology

Intel® Smart Connect Technology automatically updates your email and social
networks, such as Twitter, Facebook, etc. while the computer is in sleep mode.

English

73
 4.4.6 Intel® Thunderbolt™

Intel Thunderbolt™ Technology

Enable or disable the Intel® ThunderboltTM function.

Security Level
Select Legacy to skip the Windows certification checking process for ThunderboltTM
devices. Select Unique ID for checking the Windows certification, and show
warning messages if the devices aren't certified. Or select DP++ to support DP 1.2.

Wake From Thunderbolt™ Devices

Allow the system to be waked up by ThunderboltTM devices.

Ignore Thunderbolt™ Option Rom

Enable to skip ThunderboltTM Option ROM during POST for faster boot speed.

TBT Device IO resource Support

Enable IO Resource Support if your older Thunderbolt devices have trouble working
properly.

Thunderbolt™ PCIe Cache-line Size

English

Configure the cache-line size of the Thunderbolt PCIe subtree.

74
 H97M Pro4

4.4.7 Super IO Configuration

PS2 Y-Cable
Enable the PS2 Y-Cable or set this option to Auto.

Serial Port
Enable or disable the Serial port.

Serial Port Address

Select the address of the Serial port.

Parallel Port
Enable or disable the Parallel port.

Change Settings
Select the address of the Parallel port.

Device Mode
Select the device mode according to your connected device.
English

75
 4.4.8 ACPI Configuration

Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.

Check Ready Bit

Enable to enter the operating system after S3 only when the hard disk is ready, this
is recommended for better system stability.

ACPI HPET Table

Enable the High Precision Event Timer for better performance and to pass WHQL
tests.

PS/2 Keyboard Power On

Allow the system to be waked up by a PS/2 Keyboard.

PCI Devices Power On

Allow the system to be waked up by a PCI device and enable wake on LAN.
English

Wake From Onboard LAN

Allow the system to be waked up by the onboard LAN.

76
 H97M Pro4

Ring-In Power On
Allow the system to be waked up by onboard COM port modem Ring-In signals.

RTC Alarm Power On

Allow the system to be waked up by the real time clock alarm. Set it to By OS to let
it be handled by your operating system.

USB Keyboard/Remote Power On

Allow the system to be waked up by an USB keyboard or remote controller.

USB Mouse Power On

Allow the system to be waked up by an USB mouse.

English

77
 4.4.9 USB Configuration

USB Controller
Enable or disable all the USB ports.

Intel USB 3.0 Mode

Select Intel® USB 3.0 controller mode. Set [Smart Auto] to keep the USB 3.0 driver
enabled after rebooting (USB 3.0 is enabled in BIOS). Set [Auto] to automatically
enable the USB 3.0 driver after entering the OS (USB 3.0 is disabled in BIOS). Set
[Enabled] to keep the USB 3.0 driver enabled (Must install driver to use USB devices
under Windows® 7). Set [Disabled] to disable the USB 3.0 ports.

Legacy USB Support

Enable or disable Legacy OS Support for USB 2.0 devices. If you encounter USB
compatibility issues it is recommended to disable legacy USB support. Select UEFI
Setup Only to support USB devices under the UEFI setup and Windows/Linux
operating systems only.

Legacy USB 3.0 Support

Enable or disable Legacy OS Support for USB 3.0 devices. If you encounter USB
compatibility issues it is recommended to disable legacy USB support. Select UEFI
English

Setup Only to support USB devices under the UEFI setup and Windows/Linux
operating systems only.

78
 H97M Pro4

USB Compatibility Patch

If your USB devices (i.e. USB mouse or storage) encounter compatibility problems,
please enable this option to fix it. Please note that after enabling this option, it is
normal that the system will postpone booting up after pressing the power button.

English

79
 4.4.10 Trusted Computing

Security Device Support

Enable or disable BIOS support for security device.
English

80
 H97M Pro4

4.5 Tools

System Browser
ASRock System Browser shows the overview of your current PC and the devices
connected.

OMG (Online Management Guard)

Administrators are able to establish an internet curfew or restrict internet access
at specified times via OMG. You may schedule the starting and ending hours of
internet access granted to other users. In order to prevent users from bypassing
OMG, guest accounts without permission to modify the system time are required.

UEFI Tech Service

Contact ASRock Tech Service if you are having trouble with your PC. Please setup
network configuration before using UEFI Tech Service.

Easy RAID Installer

Easy RAID Installer helps you to copy the RAID driver from the support CD to
your USB storage device. After copying the drivers please change the SATA mode to
English

RAID, then you can start installing the operating system in RAID mode.

Easy Driver Installer

For users that don’t have an optical disk drive to install the drivers from our support

81
 CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver
to your system via an USB storage device, then downloads and installs the other
required drivers automatically.

Instant Flash
Save UEFI files in your USB storage device and run Instant Flash to update your
UEFI.

Internet Flash
ASRock Internet Flash downloads and updates the latest UEFI firmware version
from our servers for you. Please setup network configuration before using Internet
Flash.
*For BIOS backup and recovery purpose, it is recommended to plug in your USB
pen drive before using this function.

Network Configuration
Use this to configure internet connection settings for Internet Flash.

Internet Setting
Enable or disable sound effects in the setup utility.
English

UEFI Download Server

Select a server to download the UEFI firmware.

Dehumidifier Function

82
 H97M Pro4

If Dehumidifier Function is enabled, the computer will power on automatically to

dehumidify the system after entering S4/S5 state.

Dehumidifier Period
Configure the period of time until the computer powers on and enables
Dehumidifier after entering S4/S5 state.

Dehumidifier Duration
Configure the duration of the dehumidifying process before it returns to S4/S5
state.

Dehumidifier CPU Fan Setting

Configure the speed of the CPU fan while Dehumidifier is enabled. The higher the
value, the faster the fan speed.

Max: 255

Min: 1

Save User Default

Type a profile name and press enter to save your settings as user default.

Load User Default

Load previously saved user defaults.

English

83
 4.6 Hardware Health Event Monitoring Screen
This section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.

CPU Fan 1 & 2 Setting

Select a fan mode for CPU Fans 1&2, or choose Customize to set 5 CPU
temperatures and assign a respective fan speed for each temperature.

Chassis Fan 1 Setting

Select a fan mode for Chassis Fan 1, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Chassis Fan 2 Setting

Select a fan mode for Chassis Fan 2, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Over Temperature Protection

When Over Temperature Protection is enabled, the system automatically shuts
down when the motherboard is overheated.
English

Case Open Feature

Enable or disable Case Open Feature to detect whether the chassis cover has been
removed.

84
 H97M Pro4

4.7 Boot Screen

This section displays the available devices on your system for you to configure the
boot settings and the boot priority.

Fast Boot
Fast Boot minimizes your computer's boot time. In fast mode you may not boot
from an USB storage device. Ultra Fast mode is only supported by Windows 8.1/8
and the VBIOS must support UEFI GOP if you are using an external graphics card.
Please notice that Ultra Fast mode will boot so fast that the only way to enter this
UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows.

Boot From Onboard LAN

Allow the system to be waked up by the onboard LAN.

Setup Prompt Timeout

Configure the number of seconds to wait for the setup hot key.

Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots up.

Boot Beep
English

Select whether the Boot Beep should be turned on or off when the system boots up. Please
note that a buzzer is needed.

85
 Full Screen Logo
Enable to display the boot logo or disable to show normal POST messages.

AddOn ROM Display

Enable AddOn ROM Display to see the AddOn ROM messages or configure the
AddOn ROM if you've enabled Full Screen Logo. Disable for faster boot speed.

Boot Failure Guard

If the computer fails to boot for a number of times the system automatically restores
the default settings.

Boot Failure Guard Count

Configure the number of attempts to boot until the system automatically restores
the default settings.

CSM (Compatibility Support Module)

CSM
Enable to launch the Compatibility Support Module. Please do not disable unless
you’re running a WHCK test. If you are using Windows 8.1/8 64-bit and all of your
English

devices support UEFI, you may also disable CSM for faster boot speed.

86
 H97M Pro4

Launch PXE OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

Launch Storage OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

Launch Video OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

English

87
 4.8 Security Screen
In this section you may set or change the supervisor/user password for the system.
You may also clear the user password.

Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.

User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.

Secure Boot
Enable to support Windows 8.1 / 8 Secure Boot.
English

88
 H97M Pro4

4.9 Exit Screen

Save Changes and Exit

When you select this option the following message, “Save configuration changes
and exit setup?” will pop out. Select [OK] to save changes and exit the UEFI SETUP
UTILITY.

Discard Changes and Exit

When you select this option the following message, “Discard changes and exit
setup?” will pop out. Select [OK] to exit the UEFI SETUP UTILITY without saving
any changes.

Discard Changes
When you select this option the following message, “Discard changes?” will pop
out. Select [OK] to discard all changes.

Load UEFI Defaults

Load UEFI default values for all options. The F9 key can be used for this operation.

Launch EFI Shell from filesystem device

Copy shellx64.efi to the root directory to launch EFI Shell.
English

89
 Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at http://www.asrock.com/support/tsd.asp

ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,

Taipei City 112, Taiwan (R.O.C.)

ASRock EUROPE B.V.

Bijsterhuizen 3151

6604 LV Wijchen

The Netherlands

Phone: +31-24-345-44-33

Fax: +31-24-345-44-38

ASRock America, Inc.

13848 Magnolia Ave, Chino, CA91710

U.S.A.

Phone: +1-909-590-8308

Fax: +1-909-590-1026
English

90