Z690M Phantom Gaming 4

Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re
welcome to visit ASRock’s website at http://www.asrock.com; or you may contact
your dealer for further information. For technical questions, please submit a
support request form at https://event.asrock.com/tsd.asp
ASRock Incorporation
e-mail: info@asrock.com.tw
ASRock EUROPE B.V.

e-mail: sales@asrock.nl
ASRock America, Inc.

e-mail: sales@asrockamerica.com
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specifications 2
1.3 Motherboard Layout 6
1.4 I/O Panel 8
Chapter 2 Installation 9
2.1 Installing the CPU 10
2.2 Installing the CPU Fan and Heatsink 13
2.3 Installing Memory Modules (DIMM) 14
2.4 Expansion Slots (PCIe Slots) 16
2.5 Jumpers Setup 17
2.6 Onboard Headers and Connectors 18
2.7 Post Status Checker 24
2.8 CrossFireX TM and Quad CrossFireX TM Operation Guide 25
2.8.1 Installing Two CrossFireX TM-Ready Graphics Cards 25
2.8.2 Driver Installation and Setup 27
2.9 M.2 WiFi/BT PCIe WiFi Module Installation Guide 28
2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1) 30
2.11 M.2_SSD (NGFF) Module Installation Guide (M2_2) 33
Chapter 3 Software and Utilities Operation 37

3.1 Installing Drivers 37
3.2 ASRock Motherboard Utility (Phantom Gaming Tuning) 38

3.3 ASRock Live Update & APP Shop 41
3.3.1 UI Overview 41
3.3.2 Apps 42
3.3.3 BIOS & Drivers 45
3.3.4 Setting 46
3.4 Nahimic Audio 47
3.5 ASRock Polychrome SYNC 48
Chapter 4 UEFI SETUP UTILITY 51

4.1 Introduction 51
4.2 EZ Mode 52
4.3 Advanced Mode 53
4.3.1 UEFI Menu Bar 53
4.3.2 Navigation Keys 54
4.4 Main Screen 55
4.5 OC Tweaker Screen 56
4.6 Advanced Screen 71
4.6.1 CPU Configuration 72
4.6.2 Chipset Configuration 74
4.6.3 Storage Configuration 77
4.6.4 Intel(R) Thunderbolt 78
4.6.5 ACPI Configuration 79
4.6.6 USB Configuration 80
4.6.7 Trusted Computing 81
4.7 Tools 83
4.8 Hardware Health Event Monitoring Screen 85
4.9 Security Screen 89
4.10 Boot Screen 90
4.11 Exit Screen 93

Z690M Phantom Gaming 4
Chapter 1 Introduction
Thank you for purchasing ASRock Z690M Phantom Gaming 4 motherboard, a
reliable motherboard produced under ASRock’s consistently stringent quality
control. It delivers excellent performance with robust design conforming to
ASRock’s commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the

motherboard and step-by-step installation guides. Chapter 3 contains the operation
guide of the software and utilities. Chapter 4 contains the configuration guide of
the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any
modifications of this documentation occur, the updated version will be available on
ASRock’s website without further notice. If you require technical support related to
this motherboard, please visit our website for specific information about the model
you are using. You may find the latest VGA cards and CPU support list on ASRock’s
website as well. ASRock website http://www.asrock.com.
1.1 Package Contents

• ASRock Z690M Phantom Gaming 4 Motherboard (Micro ATX Form Factor)
• ASRock Z690M Phantom Gaming 4 Quick Installation Guide
• ASRock Z690M Phantom Gaming 4 Support CD
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 3 x Screws for M.2 Sockets (Optional)
• 1 x I/O Panel Shield
English
1
1.2 Specifications
Platform • Micro ATX Form Factor

• Solid Capacitor design
th th th TM
CPU • Supports 14 , 13 & 12 Gen Intel® Core Processors
(LGA1700)
• Digi Power design
• 7 Power Phase design
• Supports Intel® Hybrid Technology
• Supports Intel® Turbo Boost Max 3.0 Technology
Chipset • Intel® Z690
Memory • Dual Channel DDR4 Memory Technology

• 4 x DDR4 DIMM Slots
• Supports DDR4 non-ECC, un-buffered memory up to
5333+(OC)*
* Supports DDR4 3200 natively.
* Please refer to Memory Support List on ASRock's website for
more information. (http://www.asrock.com/)
• Supports ECC UDIMM memory modules (operate in non-
ECC mode)
• Max. capacity of system memory: 128GB
• Supports Intel® Extreme Memory Profile (XMP) 2.0
Expansion • 2 x PCIe x16 Slots (PCIE1/PCIE3: single at Gen4x16 (PCIE1);

Slot dual at Gen4x16 (PCIE1) / Gen3x4 (PCIE3))*
* Supports NVMe SSD as boot disks
• 1 x PCIe Gen3x1 Slot
TM TM
• Supports AMD Quad CrossFireX and CrossFireX
• 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT PCIe
WiFi module
Graphics • Intel® UHD Graphics Built-in Visuals and the VGA outputs
English
can be supported only with processors which are GPU

integrated.
e
• Intel® X Graphics Architecture (Gen 12)
• Supports HDMI 2.1 TMDS Compatible with max. resolution
up to 4K x 2K (4096x2160) @ 60Hz
2 • Supports HDCP 2.3 with HDMI 2.1 TMDS Compatible Port
Audio • 7.1 CH HD Audio (Realtek ALC897 Audio Codec)

• Supports Surge Protection
• Nahimic Audio
LAN • Gigabit LAN 10/100/1000 Mb/s

• Giga PHY Intel® I219V
• Supports Wake-On-LAN
• Supports Lightning/ESD Protection
• Supports Energy Efficient Ethernet 802.3az
• Supports PXE
Rear Panel • 3 x Antenna Mounting Points

I/O • 1 x HDMI Port
• 2 x USB 3.2 Gen2 Ports (10 Gb/s) (ReDriver) (Supports ESD
Protection)
• 4 x USB 3.2 Gen1 Ports (ASMedia ASM1074 hub) (Supports
ESD Protection)
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Line in / Front Speaker / Microphone
Storage • 4 x SATA3 6.0 Gb/s Connectors

• 1 x Hyper M.2 Socket (M2_1, Key M), supports type
2242/2280 PCIe Gen4x4 (64 Gb/s) mode*
• 1 x Hyper M.2 Socket (M2_2, Key M), supports type 2280
SATA3 6.0 Gb/s & PCIe Gen4x4 (64 Gb/s) modes*
* Supports Intel® OptaneTM Technology
* Supports Intel® Volume Management Device (VMD)
* Supports NVMe SSD as boot disks
* Supports ASRock U.2 Kit
RAID • Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA

storage devices
• Supports RAID 0, RAID 1 and RAID 5 for M.2 NVMe
storage devices
English
3
Connector • 1 x SPI TPM Header
• 1 x Chassis Intrusion and Speaker Header
• 1 x RGB LED Header
* Supports in total up to 12V/3A, 36W LED Strip
• 3 x Addressable LED Headers
* Support in total up to 5V/3A, 15W LED Strip
• 1 x CPU Fan Connector (4-pin)
* The CPU Fan Connector supports the CPU fan of maximum
1A (12W) fan power.
• 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)
* The CPU/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
• 4 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan
Speed Control)
* The Chassis/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
* CPU_FAN2/WP and CHA_FAN1~4/WP can auto detect if
3-pin or 4-pin fan is in use.
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector (Hi-Density Power Connec-
tor)
• 1 x 4 pin 12V Power Connector (Hi-Density Power Connec-
tor)
• 1 x Front Panel Audio Connector
• 1 x Thunderbolt AIC Connector (5-pin) (Supports ASRock
Thunderbolt 4 AIC Card)
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports
ESD Protection)
• 2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports)
(Supports ESD Protection)
BIOS • AMI UEFI Legal BIOS with multilingual GUI support

Feature • ACPI 6.0 Compliant wake up events
• SMBIOS 2.7 Support
• CPU Core/Cache, CPU GT, DRAM, VCCIN AUX, +1.05V
English
PROC, +1.8V PROC, +0.82V PCH, +1.05V PCH Voltage

Multi-adjustment
4
Hardware • Fan Tachometer: CPU, CPU/Water Pump, Chassis/Water

Monitor Pump Fans
• Quiet Fan (Auto adjust chassis fan speed by CPU tempera-
ture): CPU, CPU/Water Pump, Chassis/Water Pump Fans
• Fan Multi-Speed Control: CPU, CPU/Water Pump, Chassis/
Water Pump Fans
• CASE OPEN detection
• Voltage monitoring: CPU Vcore, DRAM, VCCIN AUX,
+1.05V PROC, +1.05V PCH, +0.82V PCH, +12V, +5V, +3.3V
OS • Microsoft® Windows® 11 / 10 64-bit
Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.
English
5
1.3 Motherboard Layout
English
6
No. Description
1 ATX 12V Power Connector (ATX12V1)
2 ATX 12V Power Connector (ATX12V2)
3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
5 CPU/Water Pump Fan Connector (CPU_FAN2/WP)
6 CPU Fan Connector (CPU_FAN1)
7 RGB LED Header (RGB_LED1)
8 Addressable LED Header (ADDR_LED1)
9 ATX Power Connector (ATXPWR1)
10 USB 3.2 Gen1 Header (USB3_7_8)
11 SATA3 Connector (SATA3_0)
12 SATA3 Connector (SATA3_1)
13 SATA3 Connector (SATA3_2) (Upper), SATA3 Connector (SATA3_3) (Lower)
14 System Panel Header (PANEL1)
15 SPI TPM Header (SPI_TPM_J1)
16 Chassis Intrusion and Speaker Header (SPK_CI1)
17 Post Status Checker (PSC)
18 USB 2.0 Header (USB3_4)
19 USB 2.0 Header (USB1_2)
20 USB 3.2 Gen1 Header (USB3_5_6)
21 Chassis/Water Pump Fan Connector (CHA_FAN2/WP)
23 Clear CMOS Jumper (CLRMOS1)
26 Front Panel Audio Header (HD_AUDIO1)
27 5-pin Thunderbolt AIC Connector (TB1)
English
7
1.4 I/O Panel
2
1 3
8 7 6 5 4
No. Description No. Description

1 LAN RJ-45 Port* 5 USB 3.2 Gen1 Ports (USB3_3_4)
2 Line In (Light Blue)** 6 USB 3.2 Gen2 Ports (USB31_TA_1_2)
3 Front Speaker (Lime)** 7 HDMI Port
4 Microphone (Pink)** 8 USB 3.2 Gen1 Ports (USB3_1_2)
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
** Function of the Audio Ports in 7.1-channel Configuration:
Port Function
English
Light Blue (Rear panel) Rear Speaker Out

Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out
8
Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard,
study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a
grounded wrist strap or touch a safety grounded object before you handle the
components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
English
9
2.1 Installing the CPU
1. Before you insert the 1700-Pin CPU into the socket, please check if the PnP cap
is on the socket, if the CPU surface is unclean, or if there are any bent pins in the
socket. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.
2 3
English
10
4 5
6 7
English
11
Please save and replace the cover if the processor is removed. The cover must be
placed if you wish to return the motherboard for after service.
English
12
2.2 Installing the CPU Fan and Heatsink
1 2
N
FA
U_
CP
English
13
2.3 Installing Memory Modules (DIMM)
This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.
1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.
Dual Channel Memory Configuration
Priority DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

1 Populated Populated
2 Populated Populated Populated Populated
The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
English
14
3
English
15
2.4 Expansion Slots (PCIe Slots)
There are 3 PCIe slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.
PCIe slots:
PCIE1 (PCIe 4.0 x16 slot) is used for PCIe x16 lane width graphics cards.
PCIE2 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
PCIE3 (PCIe 3.0 x16 slot) is used for PCIe x4 lane width graphics cards.
PCIe Slot Configurations

PCIE1 PCIE3
Single Graphics Card Gen4x16 N/A
Two Graphics Cards in

Gen4x16 Gen3x4
CrossFireXTM Mode
For a better thermal environment, please connect a chassis fan to the motherboard’s
chassis fan connector (CHA_FAN1~4/WP) when using multiple graphics cards.
English
16
2.5 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.
Clear CMOS Jumper

(CLRMOS1)
2-pin Jumper
(see p.6, No. 23)
CLRMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn off the computer and unplug the power
cord from the power supply. After waiting for 15 seconds, use a jumper cap to
short the pins on CLRMOS1 for 5 seconds. However, please do not clear the
CMOS right after you update the BIOS. If you need to clear the CMOS when you
just finish updating the BIOS, you must boot up the system first, and then shut it
down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default profile will be cleared only if the CMOS battery is
removed. Please remember toremove the jumper cap after clearing the CMOS.
If you clear the CMOS, the case open may be detected. Please adjust the BIOS option
“Clear Status” to clear the record of previous chassis intrusion status.
English
17
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.
System Panel Header PLED+ Connect the power

PLED-
(9-pin PANEL1) PWRBTN#
GND
button, reset button and
(see p.6, No. 14) system status indicator on
1
GND
the chassis to this header
according to the pin
RESET#
GND
HDLED-
HDLED+ assignments below. Note
the positive and negative
pins before connecting
the cables.
PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way
to turn off your system using the power button.
RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to
restart the computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when
the system is operating. The LED keeps blinking when the system is in S1/S3 sleep
state. The LED is off when the system is in S4 sleep state or powered off (S5).
HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on
when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists
of power button, reset button, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
Chassis Intrusion and SPEAKER

Please connect the
DUMMY
Speaker Header DUMMY chassis intrusion and the
English
+5V
(7-pin SPK_CI1) chassis speaker to this
(see p.6, No. 16) 1
header.
SIGNAL
GND
DUMMY
18
Serial ATA3 Connectors These four SATA3
SATA3_0
Right Angle: connectors support SATA
(SATA3_2: data cables for internal
see p.6, No. 13) (Upper) storage devices with up to
SATA3_1
(SATA3_3: 6.0 Gb/s data transfer rate.
see p.6, No. 13) (Lower)
Vertical:
SATA3_3
(SATA3_1:
SATA3_2
see p.6, No. 12)
(SATA3_0:
see p.6, No. 11)
USB 2.0 Headers USB_PWR There are two headers

P-
(9-pin USB1_2) P+
GND
on this motherboard.
DUMMY
(see p.6, No. 19) Each USB 2.0 header can
(9-pin USB3_4) 1 support two ports.
GND
(see p.6, No. 18) P-
P+
USB_PWR
USB 3.2 Gen1 Headers IntA_P_D+

IntA_P_D-
There are two headers on
GND
(19-pin USB3_5_6) IntA_P_SSTX+

IntA_P_SSTX- this motherboard. Each
GND
(see p.6, No. 20) USB 3.2 Gen1 header can

IntA_P_SSRX+
IntA_P_SSRX-
Vbus
support two ports.

1
Vbus
IntA_P_SSRX-
IntA_P_SSRX+
GND
IntA_P_SSTX-
IntA_P_SSTX+
GND
IntA_P_D-
IntA_P_D+
ID
(19-pin USB3_7_8) Vbus
(see p.6, No. 10) IntA_PA_SSRX-

Vbus IntA_PB_SSRX-
IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
Front Panel Audio GND This header is for

English
PRESENCE#
Header MIC_RET
OUT_RET
connecting audio devices
(9-pin HD_AUDIO1) to the front audio panel.
(see p.6, No. 26) 1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
19
1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis
must support HDA to function correctly. Please follow the instructions in our
manual and chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.
Chassis/Water Pump Fan 1 GND This motherboard

2 FAN_VOLTAGE
Connectors 3 CHA_FAN_SPEED provides four 4-Pin
4 FAN_SPEED_CONTROL
(4-pin CHA_FAN1/WP) water cooling chassis fan
(see p.6, No. 28) connectors. If you plan to
GND connect a 3-Pin chassis
FAN_VOLTAGE
(4-pin CHA_FAN2/WP) CHA_FAN_SPEED water cooler fan, please
FAN_SPEED_CONTROL
(see p.6, No. 21) connect it to Pin 1-3.
(4-pin CHA_FAN3/WP)
1 2 3 4
(see p.6, No. 22) 1 2 3 4
(4-pin CHA_FAN4/WP) 1
2
GND
FAN_VOLTAGE
(see p.6, No. 29) 3
4
CHA_FAN_SPEED
FAN_SPEED_CONTROL
CPU Fan Connector 4 3 2 1 This motherboard pro-

(4-pin CPU_FAN1) vides a 4-Pin CPU fan
(see p.6, No. 6) GND
(Quiet Fan) connector.
+12V
CPU_FAN_SPEED If you plan to connect a
FAN_SPEED_CONTROL
3-Pin CPU fan, please
connect it to Pin 1-3.
CPU/Water Pump Fan 4 3 2 1

This motherboard
Connector provides a 4-Pin water
GND
(4-pin CPU_FAN2/WP) FAN_VOLTAGE cooling CPU fan connec-
English
CPU_FAN_SPEED
(see p.6, No. 5) FAN_SPEED_CONTROL tor. If you plan to connect
a 3-Pin CPU water cooler
fan, please connect it to
Pin 1-3.
20
ATX Power Connector 12 24 This motherboard pro-

(24-pin ATXPWR1) vides a 24-pin ATX power
(see p.6, No. 9) connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
1 13 13.
ATX 12V Power 8 5 This motherboard

Connector provides a 8-pin ATX 12V
(8-pin ATX12V1) 4 1
power connector. To use a
(see p.6, No. 1) 4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.
ATX 12V Power Please connect an ATX

Connector 12V power supply to this
(4-pin ATX12V2) connector.
(see p.6, No. 2)
*The power supply plug
fits into this connector in
only one orientation.
*Connecting an ATX 12V

4-pin cable to ATX12V2 is
optional.
*For advanced overclock-

ing we suggest using this
connector together with
ATX12V1.
English
21
SPI TPM Header SPI_DQ3
SPI_PWR
This connector supports SPI
(13-pin SPI_TPM_J1) Dummy
CLK Trusted Platform Module (TPM)
SPI_MOSI
(see p.6, No. 15) RST#

TPM_PIRQ
system, which can securely
store keys, digital certificates,
1
SPI_TPM_CS#
passwords, and data. A TPM
GND
RSMRST# system also helps enhance
SPI_MISO
SPI_CS0
SPI_DQ2
network security, protects digital
identities, and ensures platform
integrity.
Thunderbolt AIC Please connect a Thunderbolt™

Connector add-in card (AIC) to the
(5-pin TB1) Thunderbolt AIC connector via
(see p.6, No. 27) the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE3 (default
slot).
RGB LED Header This RGB header is used to con-

(4-pin RGB_LED1) nect RGB LED extension cable
(see p.6, No. 7) which allow users to choose from
various LED lighting effects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 48 for
further instructions on this
header.
English
22
Addressable LED These headers are used to connect

Headers Addressable LED extension ca-
(3-pin ADDR_LED1) bles which allow users to choose
(see p.6, No. 8) from various LED lighting
effects.
(3-pin ADDR_LED2) 1 Caution: Never install the
(see p.6, No. 25) GND Addressable LED cable in the
DO_ADDR
(3-pin ADDR_LED3) VOUT wrong orientation; otherwise,
(see p.6, No. 24) the cable may be damaged.
*Please refer to page 49 for
further instructions on this
header.
English
23
2.7 Post Status Checker
Post Status Checker (PSC) diagnoses the computer when users power on the
machine. It emits a red light to indicate whether the CPU, memory, VGA or stor-
age is dysfunctional. The lights go off if the four mentioned above are functioning
normally.
English
24
2.8 CrossFireXTM and Quad CrossFireXTM Operation Guide

This motherboard supports CrossFireXTM and Quad CrossFireXTM that allows you
to install up to three identical PCI Express x16 graphics cards.
1. You should only use identical CrossFireXTM-ready graphics cards that are AMD
certified.
2. Make sure that your graphics card driver supports AMD CrossFireXTM technology.
Download the drivers from the AMD’s website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certified PSU. Please
refer to the AMD’s website for details.
4. If you pair a 12-pipe CrossFireXTM Edition card with a 16-pipe card, both cards will
operate as 12-pipe cards while in CrossFireXTM mode.
5. Different CrossFireXTM cards may require different methods to enable CrossFi-
reXTM. Please refer to AMD graphics card manuals for detailed installation guide.
2.8.1 Installing Two CrossFireXTM-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing a
CrossFire Bridge on the CrossFire Bridge
CrossFire Bridge Interconnects on the top of the graphics
cards. (The CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
English
25
Step 3
Connect a VGA/DVI/DP/HDMI cable
from the monitor to the corresponding
port on the graphics card installed to the
PCIE1 slot.
English
26
2.8.2 Driver Installation and Setup
Step 1
Power on your computer and boot into OS.
Step 2
Remove the AMD drivers if you have any VGA drivers installed in your system.
The Catalyst Uninstaller is an optional download. We recommend using this utility

to uninstall any previously installed Catalyst drivers prior to installation. Please
check AMD’s website for AMD driver updates.
Step 3
Install the required drivers and CATALYST Control Center then restart your
computer. Please check AMD’s website for details.
Step 4
Double-click the AMD Catalyst Control
AMD Catalyst Control Center Center icon in the Windows® system tray.
Step 5
In the left pane, click Performance and
then AMD CrossFireXTM . Then select
Enable AMD CrossFireX and click Apply.
Select the GPU number according to your
graphics card and click Apply. English
27
2.9 M.2 WiFi/BT PCIe WiFi Module Installation Guide
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key
E) supports type 2230 WiFi/BT PCIe WiFi module.
* The M.2 socket does not support SATA M.2 SSDs.
Installing the WiFi/BT module
Step 1
Prepare a type 2230 WiFi/BT PCIe

WiFi module and the screw.
Step 2
Find the nut location to be used.
PCB Length: 3cm

Module Type: Type2230
A
English
28
Step 3
Gently insert the WiFi/BT module

into the M.2 slot. Please be aware
that the module only fits in one
orientation.
A 20o
Step 4
Tighten the screw with a screwdriver

to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
A
English
29
2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1)
versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2
Socket (M2_1, Key M) supports type 2242/2280 PCIe Gen4x4 (64 Gb/s) mode.
Installing the M.2_SSD (NGFF) Module
Step 1
Prepare a M.2_SSD (NGFF) module

and the screw.
Step 2
Depending on the PCB type and

length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
No. 1 2
Nut Location A B
PCB Length 4.2cm 8cm
Module Type Type 2242 Type 2280
English
30
Step 3
Move the standoff based on the

module type and length.
The standoff is placed at the nut
location B by default. Skip Step 3 and
4 and go straight to Step 5 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on

the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Gently insert the M.2 (NGFF) SSD

module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
B A 20o
B A
Step 6
English

B NUT2 NUT1
31
M.2_SSD (NGFF) Module Support List
Vendor Interface P/N

ADATA PCIe3 x4 ASX7000NP-128GT-C
ADATA PCIe3 x4 ASX8000NP-256GM-C
Apacer PCIe3 x4 AP240GZ280
Corsair PCIe3 x4 CSSD-F240GBMP500
Intel PCIe3 x4 SSDPEKKF256G7
Kingston PCIe3 x4 SKC1000/480G
Kingston PCIe2 x4 SH2280S3/480G
OCZ PCIe3 x4 RVD400 -M2280-512G (NVME)
PATRIOT PCIe3 x4 PH240GPM280SSDR NVME
Plextor PCIe3 x4 PX-128M8PeG
Plextor PCIe3 x4 PX-1TM8PeG
Plextor PCIe PX-G256M6e
Samsung PCIe3 x4 SM961 MZVPW128HEGM (NVM)
Samsung PCIe3 x4 PM961 MZVLW128HEGR (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250) (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250BW) (NVME)
Samsung PCIe3 x4 SM951 (NVME)
Samsung PCIe3 x4 SM951 (MZHPV256HDGL)
Samsung PCIe x4 XP941-512G (MZHPU512HCGL)
SanDisk PCIe SD6PP4M-128G
TEAM PCIe3 x4 TM8FP2240G0C101
TEAM PCIe3 x4 TM8FP2480GC110
WD PCIe3 x4 WDS256G1X0C-00ENX0 (NVME)
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website
for details: http://www.asrock.com
English
32
2.11 M.2_SSD (NGFF) Module Installation Guide (M2_2)

versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2
Socket (M2_2, Key M) supports type 2280 SATA3 6.0 Gb/s & PCIe Gen4x4 (64 Gb/s)
modes.
Installing the M.2_SSD (NGFF) Module
Step 1
Prepare a M.2_SSD (NGFF) module

and the screw.
Step 2
Depending on the PCB type and

length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
No. 1
Nut Location A
PCB Length 8cm
Module Type Type 2280
English
33
Step 3
Align and gently insert the M.2

(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
A
A 20o
Step 4

NUT2 NUT1
English
34
M.2_SSD (NGFF) Module Support List
Vendor Interface P/N

ADATA SATA3 AXNS330E-32GM-B
ADATA SATA3 ASU800NS38-256GT-C
ADATA SATA3 ASU800NS38-512GT-C
Apacer PCIe3 x4 AP240GZ280
Corsair PCIe3 x4 CSSD-F240GBMP500
Crucial SATA3 CT120M500SSD4
Crucial SATA3 CT240M500SSD4
Intel SATA3 Intel SSDSCKGW080A401/80G
Kingston SATA3 SM2280S3
Kingston PCIe3 x4 SKC1000/480G
Kingston PCIe2 x4 SH2280S3/480G
OCZ PCIe3 x4 RVD400 -M2280-512G (NVME)
PATRIOT PCIe3 x4 PH240GPM280SSDR NVME
Plextor PCIe3 x4 PX-1TM8PeG
Samsung PCIe3 x4 SM961 MZVPW128HEGM (NVM)
Samsung PCIe3 x4 PM961 MZVLW128HEGR (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250) (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250BW) (NVME)
Samsung PCIe x4 XP941-512G (MZHPU512HCGL)
English

Team SATA3 TM4PS4128GMC105
35
TEAM PCIe3 x4 TM8FP2240G0C101
TEAM PCIe3 x4 TM8FP2480GC110
Transcend SATA3 TS256GMTS400
V-Color SATA3 VLM100-120G-2280B-RD
V-Color SATA3 VLM100-240G-2280RGB
V-Color SATA3 VSM100-240G-2280
V-Color SATA3 VLM100-240G-2280B-RD
WD SATA3 WDS100T1B0B-00AS40
WD SATA3 WDS240G1G0B-00RC30
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website
for details: http://www.asrock.com
English
36
Chapter 3 Software and Utilities Operation

3.1 Installing Drivers
The Support CD that comes with the motherboard contains necessary drivers and
useful utilities that enhance the motherboard’s features.
Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD
automatically displays the Main Menu if “AUTORUN” is enabled in your computer.
If the Main Menu does not appear automatically, locate and double click on the file
“ASRSETUP.EXE” in the Support CD to display the menu.
Drivers Menu
The drivers compatible to your system will be auto-detected and listed on the
support CD driver page. Please click Install All or follow the order from top to
bottom to install those required drivers. Therefore, the drivers you install can work
properly.
Utilities Menu
The Utilities Menu shows the application software that the motherboard supports.
Click on a specific item then follow the installation wizard to install it.
English
37
3.2 ASRock Motherboard Utility (Phantom Gaming Tuning)
ASRock Motherboard Utility (Phantom Gaming Tuning) is ASRock’s multi pur-
pose software suite with a new interface, more new features and improved utilities.
3.2.1 Installing ASRock Motherboard Utility (Phantom

Gaming Tuning)
ASRock Motherboard Utility (Phantom Gaming Tuning) can be downloaded from
ASRock Live Update & APP Shop. After the installation, you will find the icon “AS-
Rock Motherboard Utility (Phantom Gaming Tuning)“ on your desktop. Double-
click the “ASRock Motherboard Utility (Phantom Gaming Tuning)“ icon,
ASRock Motherboard Utility (Phantom Gaming Tuning) main menu will pop up.
3.2.2 Using ASRock Motherboard Utility (Phantom Gam-

ing Tuning)
There are five sections in ASRock Motherboard Utility (Phantom Gaming Tuning)
main menu: Operation Mode, OC Tweaker, System Info, FAN-Tastic Tuning and
Settings.
Operation Mode
Choose an operation mode for your computer.
English
38
OC Tweaker
Configurations for overclocking the system.
System Info
View information about the system.
*The System Browser tab may not appear for certain models.
English
39
FAN-Tastic Tuning
Configure up to five different fan speeds using the graph. The fans will automatically shift
to the next speed level when the assigned temperature is met.
Settings
Configure ASRock ASRock Motherboard Utility (Phantom Gaming Tuning).
Click to select "Auto run at Windows Startup" if you want ASRock Motherboard
Utility (Phantom Gaming Tuning) to be launched when you start up the Windows
operating system.
English
40
3.3 ASRock Live Update & APP Shop

The ASRock Live Update & APP Shop is an online store for purchasing and
downloading software applications for your ASRock computer. You can quickly
and easily install various apps and support utilities. With ASRock Live Update &
APP Shop, you can optimize your system and keep your motherboard up to date
simply with a few clicks.
Double-click on your desktop to access ASRock Live Update & APP Shop
utility.
*You need to be connected to the Internet to download apps from the ASRock Live Update & APP Shop.
3.3.1 UI Overview
Category Panel Hot News
Information Panel
Category Panel: The category panel contains several category tabs or buttons that
when selected the information panel below displays the relative information.
Information Panel: The information panel in the center displays data about the
currently selected category and allows users to perform job-related tasks.
English
Hot News: The hot news section displays the various latest news. Click on the image
to visit the website of the selected news and know more.
41
3.3.2 Apps
When the "Apps" tab is selected, you will see all the available apps on screen for you
to download.
Installing an App
Step 1
Find the app you want to install.
The most recommended app appears on the left side of the screen. The other various
apps are shown on the right. Please scroll up and down to see more apps listed.
You can check the price of the app and whether you have already intalled it or not.
- The red icon displays the price or "Free" if the app is free of charge.
- The green "Installed" icon means the app is installed on your computer.
Step 2
Click on the app icon to see more details about the selected app.
English
42
Step 3
If you want to install the app, click on the red icon to start downloading.
Step 4
When installation completes, you can find the green "Installed" icon appears on
the upper right corner.
To uninstall it, simply click on the trash can icon .

English
*The trash icon may not appear for certain apps.
43
Upgrading an App
You can only upgrade the apps you have already installed. When there is an
available new version for your app, you will find the mark of "New Version"
appears below the installed app icon.
Step 1
Click on the app icon to see more details.
Step 2
Click on the yellow icon to start upgrading.

English
44
3.3.3 BIOS & Drivers
Installing BIOS or Drivers

When the "BIOS & Drivers" tab is selected, you will see a list of recommended or
critical updates for the BIOS or drivers. Please update them all soon.
Step 1
Please check the item information before update. Click on to see more details.
Step 2
Click to select one or more items you want to update.
Step 3
Click Update to start the update process.

English
45
3.3.4 Setting
In the "Setting" page, you can change the language, select the server location, and
determine if you want to automatically run the ASRock Live Update & APP Shop
on Windows startup.
English
46
3.4 Nahimic Audio

Nahimic audio software provides an incredible high definition sound technology which
boosts the audio and voice performance of your system. Nahimic Audio interface is
composed of four tabs: Audio, Microphone, Sound Tracker and Settings.
There are four functions in Nahimic audio :
No. Function Description
From this tab, you can mute the current audio device,
choose between four factory audio profiles, turn all audio ef-
1 Audio
fects on/off, restores the current profile to its default settings
and access Surround Sound and various features.
From this tab, you can mute the current mic device, choose
between two factory mic profiles, turn/off all microphone
2 Microphone
effects, restore the current profile to its default settings, and
access Static Noise Suppression and various features.
The Sound Tracker provides a visual indication localizing

the sources of the sounds while in a game. These are
Sound
3 represented by dynamic segments pointing the direction
Tracker
English
of the sounds: the more opaque they are, the stronger the
sounds are.
From this tab, you can access all settings and information of
4 Settings
the software.
47
3.5 ASRock Polychrome SYNC
ASRock Polychrome SYNC is a lighting control utility specifically designed for unique indi-
viduals with sophisticated tastes to build their own stylish colorful lighting system. Simply by
connecting the LED strip, you can customize various lighting schemes and patterns, including
Static, Breathing, Strobe, Cycling, Music, Wave and more.
Connecting the LED Strip

Connect your RGB LED strip to the RGB LED Header (RGB_LED1) on the motherboard.
RGB_LED1
1 B
R
G
12V
1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.
1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports standard 5050 RGB LED strip (12V/G/R/B), with a
maximum power rating of 3A (12V) and length within 2 meters.
English
48
Connecting the Addressable RGB LED Strip

Connect your Addressable RGB LED strips to the Addressable LED Headers (ADDR_LED1 /
ADDR_LED2 / ADDR_LED3) on the motherboard.
ADDR_LED1
1
ADDR_LED2
1
GND
DO_ADDR
VOUT
ADDR_LED3
1
GND
DO_ADDR
VOUT
1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.
1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports WS2812B addressable RGB LED strip (5V/Data/
English
GND), with a maximum power rating of 3A (5V) and length within 2 meters.
49
ASRock Polychrome SYNC Utility
Now you can adjust the RGB LED color through the ASRock Polychrome SYNC Utility.
Download this utility from the ASRock Live Update & APP Shop and start coloring your
PC style your way!
Drag the tab to customize

your preference.
Toggle on/off the

RGB LED switch
Select a RGB LED light effect
from the drop-down menu.
Sync RGB LED effects

for all LED regions of
the motherboard
English
50
Chapter 4 UEFI SETUP UTILITY

4.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
after you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY after
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system off
and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.
English
51
4.2 EZ Mode
The EZ Mode screen appears when you enter the BIOS setup program by default.
EZ mode is a dashboard which contains multiple readings of the system’s current
status. You can check the most crucial information of your system, such as CPU
speed, DRAM frequency, SATA information, fan speed, etc.
Press <F6> or click the "Advanced Mode" button at the upper right corner of the
screen to switch to "Advanced Mode" for more options.
1 2 3 4 5 6
No. Function
1 Help
2 Load UEFI Defaults
3 Save Changes and Exit
4 Discard Changes
5 Change Language
6 Switch to Advanced Mode
English
52
4.3 Advanced Mode

The Advanced Mode provides more options to configure the BIOS settings. Refer to
the following sections for the detailed configurations.
To access the EZ Mode, press <F6> or click the "EZ Mode" button at the upper right
corner of the screen.
4.3.1 UEFI Menu Bar

The top of the screen has a menu bar with the following selections:
Main For setting system time/date information
OC Tweaker For overclocking configurations
Advanced For advanced system configurations
Tool Useful tools
H/W Monitor Displays current hardware status
Security For security settings
Boot For configuring boot settings and boot priority
Exit Exit the current screen or the UEFI Setup Utility

English
53
4.3.2 Navigation Keys
Use < > key or < > key to choose among the selections on the menu bar, and
use < > key or < > key to move the cursor up or down to select items, then
press <Enter> to get into the sub screen. You can also use the mouse to click your
required item.
Please check the following table for the descriptions of each navigation key.
Navigation Key(s) Description
+ / - To change option for the selected items
<Tab> Switch to next function
<PGUP> Go to the previous page
<PGDN> Go to the next page
<HOME> Go to the top of the screen
<END> Go to the bottom of the screen
<F1> To display the General Help Screen
<F5> Add / Remove Favorite
<F7> Discard changes and exit the SETUP UTILITY
<F9> Load optimal default values for all the settings
<F10> Save changes and exit the SETUP UTILITY
<F12> Print screen
<ESC> Jump to the Exit Screen or exit the current screen

English
54
4.4 Main Screen

When you enter the UEFI SETUP UTILITY, the Main screen will appear and
display the system overview.
The availability and location of BIOS settings can be different for different models
and BIOS versions.
My Favorite
Display your collection of BIOS items. Press F5 to add/remove your favorite items.
English
55
4.5 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.
Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.
CPU Configuration
CPU Information
This item allows users to browse the CPU information.
CPU Configuration
CPU Ratio
The CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the CPU Ratio will increase the internal CPU clock speed without
affecting the clock speed of other components.
English
AVX2 Ratio Offset

AVX2 Ratio Offset specifies a negative offset from the CPU Ratio for AVX
workloads. AVX is a more stressful workload that lower the AVX ratio to ensure
maximum possible ratio for SSE workloads.
56
Core Ratio Extension Mode

Enable or disable core ratio above 85 Extension mode.
[Enabled] Max overclocking ratio limit as specified by OCMB 0x1 command is 120
[Disabled] Max overclocking ratio limit as specified by OCMB 0x1 command is 85
Atom Ratio
The Atom CPU Ratio. The maximum should be the same as the CPU Ratio.
Cluster 0 Max Ratio

Override ATOM Core 0 - 3 Maximum OC Ratio, maximum value up to 120.
Cluster 1 Max Ratio

Override ATOM Core 4 - 7 Maximum OC Ratio, maximum value up to 120.
CPU Cache Ratio

The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU
Ratio.
BCLK Frequency
The CPU speed is determined by the CPU Ratio multiplied with the BCLK. Increas-
ing the BCLK will increase the internal CPU clock speed but also affect the clock
speed of other components.
BCLK Aware Adaptive Voltage

BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. This is ideal for
BCLK OC to avoid high voltage overrides.
Boot Performance Mode

Select the performance state that the BIOS will set before OS handoff.
Ring to Core Ratio Offset

Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.
Intel SpeedStep Technology

English
Intel SpeedStep technology allows processors to switch between multiple frequen-

cies and voltage points for better power saving and heat dissipation.
57
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
Intel Speed Shift Technology

Enable/Disable Intel Speed Shift Technology support. Enabling will expose the
CPPC v2 interface to allow for hardware controlled P-sates.
Intel Turbo Boost Max Technology 3.0

Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
Intel Thermal Velocity Boost Voltage Optimizations

This service controls thermal based voltage optimizations for processors that
implment the Intel Thermal Velocity Boost (TVB) feature.
CPU Tj Max
Set CPU Tj Max to adjust TCC Target Temperature. Default setting is 105°C.
Dual Tau Boost

Enable Dual Tau Boost feature. This is only applicable for CMLS 35W/65W/125W
skus. This item is only supported with processors with Config TDP support.
Long Duration Power Limit

Configure Package Power Limit 1 in watts. When the limit is exceeded, the CPU
ratio will be lowered after a period of time. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.
Long Duration Maintained

Configure the period of time until the CPU ratio is lowered when the Long
Duration Power Limit is exceeded.
Short Duration Power Limit

Configure Package Power Limit 2 in watts. When the limit is exceeded, the CPU
ratio will be lowered immediately. A lower limit can protect the CPU and save
power, while a higher limit may improve performance.
English
CPU Core Unlimited Current Limit

To unlock voltage regulator current limit completely, you can set this option to
Enabled.
58
CPU Core Current Limit

Configure the current limit of the CPU core. A lower limit can protect the CPU and
GT Unlimited Current Limit

To unlock voltage regulator current limit completely, you can set this option to
Enabled.
GT Current Limit
Configure the current limit of the GT slice. A lower limit can protect the CPU and
DRAM Configuration
Memory Information
Allows users to browse the serial presence detect (SPD) and Intel extreme memory profile
(XMP) for DDR4 modules.
DRAM Timing Configuration

Load XMP Setting
Load XMP settings to overclock the memory and perform beyond standard
specifications.
DRAM Reference Clock

Select Auto for optimized settings.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.
DRAM Gear Mode

High gear is good for high frequency.
BCLK Frequency
Configure the BCLK Frequency.
Primary Timing
English
CAS# Latency (tCL)

The time between sending a column address to the memory and the beginning of the data
59
in response.
RAS# to CAS# Delay and Row Precharge (tRCDtRP)

RAS# to CAS# Delay : The number of clock cycles required between the opening of a row
of memory and accessing columns within it.
Row Precharge: The number of clock cycles required between the issuing of the precharge
command and opening the next row.
RAS# Active Time (tRAS)

The number of clock cycles required between a bank active command and issuing the
precharge command.
Command Rate (CR)

The delay between when a memory chip is selected and when the first active command can
be issued.
Secondary Timing
Write Recovery Time (tWR)
The amount of delay that must elapse after the completion of a valid write
operation, before an active bank can be precharged.
Refresh Cycle Time (tRFC)

The number of clocks from a Refresh command until the first Activate command to
the same rank.
RAS to RAS Delay (tRRD_L)

The number of clocks between two rows activated in different banks of the same
rank.
RAS to RAS Delay (tRRD_S)

The number of clocks between two rows activated in different banks of the same
rank.
Read to Precharge (tRTP)

The number of clocks that are inserted between a read command to a row pre-
charge command to the same rank.
English
Four Activate Window (tFAW)

The time window in which four activates are allowed the same rank.
60
CAS Write Latency (tCWL)

Configure CAS Write Latency.
Third Timing
tREFI
Configure refresh cycles at an average periodic interval.
tCKE
Configure the period of time the DDR4 initiates a minimum of one refresh
command internally once it enters Self-Refresh mode.
Turn Around Timing

Turn Around Timing Optimization
Auto is enabled in general case.
TAT Training Value

tRDRD_sg
Configure between module read to read delay.
tRDRD_dg
tRDRD_dr
tRDRD_dd
tRDWR_sg
Configure between module read to write delay.
tRDWR_dg
tRDWR_dr
English
tRDWR_dd
61
tWRRD_sg
Configure between module write to read delay.
tWRRD_dg
tWRRD_dr
tWRRD_dd
tWRWR_sg
Configure between module write to write delay.
tWRWR_dg
tWRWR_dr
tWRWR_dd
TAT Runtime Value

tRDRD_sg
tRDRD_dg
tRDRD_dr
English
tRDRD_dd
tRDWR_sg
62
tRDWR_dg
tRDWR_dr
tRDWR_dd
tWRRD_sg
tWRRD_dg
tWRRD_dr
tWRRD_dd
tWRWR_sg
tWRWR_dg
tWRWR_dr
tWRWR_dd
Round Trip Timing

English
Round Trip Timing Optimization

Auto is enabled in general case.
Round Trip Level
63
Configure round trip level.
RTL F1F0 Delay

Configure round trip latency initial value.
RTL F2F0 Delay

Initial RTL (MC0 C0 A1/A2)

Initial RTL (MC0 C1 A1/A2)

Initial RTL (MC1 C0 B1/B2)

Initial RTL (MC1 C1 B1/B2)

RTL (MC0 C0 A1/A2)

Configure round trip latency value.
RTL (MC0 C1 A1/A2)

RTL (MC1 C0 B1/B2)

RTL (MC1 C1 B1/B2)

ODT Setting
Dimm ODT Training
ODT values will be optimized by Dimm On-Die Termination Training.
ODT WR (A1)
English
Configure the memory on die termination resistors' WR for channel A1.
ODT WR (A2)
Configure the memory on die termination resistors' WR for channel A2.
64
ODT WR (B1)
Configure the memory on die termination resistors' WR for channel B1.
ODT WR (B2)
Configure the memory on die termination resistors' WR for channel B2.
ODT NOM (A1)

Use this to change ODT (CH A1) Auto/Manual settings. The default is [Auto].
ODT NOM (A2)

Use this to change ODT (CH A2) Auto/Manual settings. The default is [Auto].
ODT NOM (B1)

Use this to change ODT (CH B1) Auto/Manual settings. The default is [Auto].
ODT NOM (B2)

Use this to change ODT (CH B2) Auto/Manual settings. The default is [Auto].
ODT PARK (A1)

Configure the memory on die termination resistors' PARK for channel A1.
ODT PARK (A2)

Configure the memory on die termination resistors' PARK for channel A2.
ODT PARK (B1)

Configure the memory on die termination resistors' PARK for channel B1.
ODT PARK (B2)

Configure the memory on die termination resistors' PARK for channel B2.
Advanced Setting
ASRock Timing Optimization
Configure the fast path through the MRC.
ASRock Second Timing Optimization

Configure the second fast path through the MRC.
English
Realtime Memory Timing

Configure the realtime memory timings.
65
[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.
Early Command Training

Configure the Early Command Training.
Early Command Training is the initial step after reading SPD and configuring
DDR interface to desired speed/timings.
Read Equalization Training

Configure the Read Equalization Training.
Reset for MRC Failed

Reset system after MRC training is failed.
MRC Training on Warm Boot

When enabled, memory training will be executed when warm boot.
MRC Fast Boot

Enable Memory Fast Boot to skip DRAM memory training for booting faster.
Voltage Configuration
CPU Core/Cache Voltage
Input voltage for the processor by the external voltage regulator.
Core/Cache V/F Curve

Configure CPU Core/Cache Voltage/Frequency Curve.
CPU Core/Cache Load-Line Calibration

CPU Core/Cache Load-Line Calibration helps prevent CPU Core/Cache voltage
droop when the system is under heavy loading.
CPU GT Voltage
Configure the voltage for the integrated GPU.
CPU GT Load-Line Calibration

GT Load-Line Calibration helps prevent integrated GPU voltage droop when the
English
system is under heavy load.
DRAM Voltage
66
Use this to configure DRAM Voltage. The default value is [Auto].
VCCIN AUX Voltage

Configure the voltage for the VCCIN AUX.
+1.8V PROC Voltage

Configure the CPU voltage (1.8V).
+1.05V PROC Voltage

Configure the CPU voltage (1.05V).
+0.82V PCH Voltage

Configure the chipset voltage (0.82V).
+1.05V PCH Voltage

Configure the chipset voltage (1.05V).
PLL Voltage Configuration

Core PLL Voltage Offset
Use this feature to set the PLL Voltage Offset value from 0-15 with each unit at
17.5mV. This is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
GT PLL Voltage Offset

Ring PLL Voltage Offset

System Agent PLL Voltage Offset

English
Atom Core PLL Voltage Offset

67
Memory Controller PLL Voltage Offset

AVX Configuration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to
AVX2 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00
will decrease the voltage guardband.
FIVR Configuration
Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the
voltage selected will be applied over all operating frequencies. In Adaptive mode,
the voltage is interpolated only in turbo mode.
Core Extra Turbo Voltage

Specifies the extra turbo voltage applied while the IA Core is operating in turbo
mode.
VF Offset Mode
Selects between Legacy and Selection modes. Need Reset System after enabling
OverClocking Feature to initialize the default value. In Legacy Mode, setting a
global offset for the entire VF curve. In Selection modes, setting a selected VF
point.
VF Configuration Scope
Allows all cores VF curve or per-core VF curve configuration.
Core Voltage Offset

Specifies the offset voltage applied to the IA Core domain. This voltage is specified
in millivolts.
Offset Prefix
English
Sets the offset value as positive or negative.
Atom L2 Voltage Mode
68
Selects between adaptive and Override Voltage modes. In Override Mode the
voltage selected will be applied over all operating frequencies. In Adaptive Mode
the voltage is interpolated only in turbo mode. Uses Mailbox 0SR 0x150, cmd 0x10,
0x11.
Atom L2 Extra Turbo Voltage

Specifies the extra turbo voltage applied while Atom L2 is operating in turbo mode.
Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
Atom L2 Voltage Offset

Specifies the Offset Voltage applied to the Atom L2 domain. This voltage is specified
in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.
Offset Prefix
Ring Voltage Mode

0x11.
Ring Extra Turbo Voltage

Specifies the extra turbo voltage applied while ring is operating in turbo mode.
Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
VF Offset Mode
Selects between Legacy and Selection modes. Need Reset System after enabling
OverClocking Feature to initialize the default value. In Legacy Mode, setting a
global offset for the entire VF curve. In Selection modes, setting a selected VF
point.
Ring Voltage Offset

Specifies the Offset Voltage applied to the Ring domain. This voltage is specified in
millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.
Offset Prefix
English
GT Voltage Mode
69
0x11.
GT Extra Turbo Voltage

Specifies the extra turbo voltage applied while GT is operating in turbo mode. Uses
Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
GT Voltage Offset
Specifies the Offset Voltage applied to the GT domain. This voltage is specified in
millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.
Offset Prefix
Uncore Voltage Mode

0x11.
Uncore Extra Turbo Voltage

Specifies the extra turbo voltage applied while SA Uncore is operating in turbo
mode. Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
Uncore Voltage Offset

Specifies the Offset Voltage applied to the Uncore domain. This voltage is specified
in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.
Offset Prefix
Save User Default

Type a profile name and press enter to save your settings as user default.
Load User Default

Load previously saved user defaults.
Save User UEFI Setup Profile to Disk

English
It helps you to save current UEFI settings as an user profile to disk.
Load User UEFI Setup Profile from Disk

You can load previous saved profile from the disk.
70
4.6 Advanced Screen

In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, Storage Configuration, Intel(R) Thunderbolt,
ACPI Configuration, USB Configuration and Trusted Computing.
Setting wrong values in this section may cause the system to malfunction.
UEFI Configuration
UEFI Setup Style
Select the default mode when entering the UEFI setup utility.
Active Page on Entry

Select the default page when entering the UEFI setup utility.
Full HD UEFI
When [Auto] is selected, the resolution will be set to 1920 x 1080 if the monitor
English
supports Full HD resolution. If the monitor does not support Full HD resolution,
then the resolution will be set to 1024 x 768. When [Disable] is selected, the
resolution will be set to 1024 x 768 directly.
71
4.6.1 CPU Configuration
Atom Core Information

This item displays the Atom Core Information.
Core Information
This item displays the Core Information.
Intel Hyper Threading Technology

Intel Hyper Threading Technology allows multiple threads to run on each core, so
that the overall performance on threaded software is improved.
Pre-Core Hyper Threading

The Pre-Core Hyper Threading feature allows you to disable Hyper Threading on
specific cores.
Active Processor Cores

Select the number of cores to enable in each processor package.
Active Atom Cores

Select the number of cores to enable in each Atom processor package.
English
CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C6 and
C7 enabled for better power saving.
72
Enhanced Halt State (C1E)

Enable Enhanced Halt State (C1E) for lower power consumption.
CPU C6 State Support

Enable C6 deep sleep state for lower power consumption.
CPU C7 State Support

Enable C7 deep sleep state for lower power consumption.
Package C State Support

Enable CPU, PCIe, Memory, Graphics C State Support for power saving.
CFG Lock
This item allows you to disable or enable the CFG Lock.
C6DRAM
Enable/Disable moving of DRAM contents to PRM memory when CPU is in C6
state.
CPU Thermal Throttling

Enable CPU internal thermal control mechanisms to keep the CPU from overheat-
ing.
Intel AVX/AVX2
Enable/Disable the Intel AVX and AVX2 Instructions. This is applicable for Big
Core only.
Intel Virtualization Technology

Intel Virtualization Technology allows a platform to run multiple operating
systems and applications in independent partitions, so that one computer system
can function as multiple virtual systems.
Hardware Prefetcher
Automatically prefetch data and code for the processor. Enable for better
performance.
Adjacent Cache Line Prefetch

English
Automatically prefetch the subsequent cache line while retrieving the currently
requested cache line. Enable for better performance.
73
4.6.2 Chipset Configuration
Primary Graphics Adapter

Select a primary VGA.
Above 4G Decoding
Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space
(only if the system supports 64 bit PCI decoding).
C.A.M (Clever Access Memory)

If system has Resizable BAR capable PCIe Devices, use this option to enable or
disable Resizable BAR support (only of the system supports 64-bit PCI decoding).
VT-d
Intel® Virtualization Technology for Directed I/O helps your virtual machine
monitor better utilize hardware by improving application compatibility and
reliability, and providing additional levels of manageability, security, isolation, and
I/O performance.
SR-IOV Support
If system has SR-IOV capable PCIe Devices, this option Enables or Disables Single
English
Root IO Virtualization Support.
DMI Link Speed
74
Configure DMI Slot Link Speed. Auto mode is optimizing for overclocking.
PCIE1 Link Speed

Select the link speed for PCIE1.
PCIE2 Link Speed

PCIE3 Link Speed

PCI Express Native Control

Select Enable for enhanced PCI Express power saving in OS.
PCIE ASPM Support

This option enables/disables the ASPM support for all CPU downstream devices.
PCH PCIE ASPM Support

This option enables/disables the ASPM support for all PCH PCIE devices.
DMI ASPM Support

This option enables/disables the control of ASPM on CPU side of the DMI Link.
PCH DMI ASPM Support

This option enables/disables the ASPM support for all PCH DMI devices.
Share Memory
Configure the size of memory that is allocated to the integrated graphics processor when
the system boots up.
IGPU Multi-Monitor
Select disable to disable the integrated graphics when an external graphics card is
installed. Select enable to keep the integrated graphics enabled at all times.
Inte(R) Ethernet Connection I219-V

Enable or disable the onboard network interface controller (Intel® I219V).).
English
Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.
75
Front Panel
Enable/disable front panel HD audio.
Onboard HDMI HD Audio

Enable audio for the onboard digital outputs.
Onboard WAN Device

Use this item to enable or disable the onboard WAN device.
WAN Radio
Enable/disable the WiFi module's connectivity.
Bluetooth
Enable/disable the Bluetooth connectivity.
Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.
Restore on AC/Power Loss

Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.
Turn On Onboard LED in S5

Turn on Onboard LED in the ACPI S5 state.
Restore Onboard LED Default

Restore Onboard LED default value.
RGB LED
This option enables/disables the RGB LED.
English
76
4.6.3 Storage Configuration
SATA Controller(s)
Enable/disable the SATA controllers.
SATA Mode Selection

AHCI: Supports new features that improve performance.
Hybrid Storage Detection and Configuration Mode

This item allows you select Hybrid Storage Detection and Configuration Mode.
SATA Aggressive Link Power Management

SATA Aggressive Link Power Management allows SATA devices to enter a low
power state during periods of inactivity to save power. It is only supported by AHCI
mode.
Hard Disk S.M.A.R.T.

S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a
monitoring system for computer hard disk drives to detect and report on various
English
indicators of reliability.
VMD Configuration
This item allows you to enable or disable the Intel VMD support function.
77
4.6.4 Intel(R) Thunderbolt
Discrete Thunderbolt(TM) Support

Enable or disable the Discrete Thunderbolt(TM) Support.
Thunderbolt Boot Support

Enabled to allow booting from Bootable devices which are present behind
Thunderbolt.
Thunderbolt Usb Support

Enabled to allow booting from Usb devices which are present behind Thunderbolt.
Windows 10 Thunderbolt support

Enable or disable the Windows 10 Thunderbolt support.
English
78
4.6.5 ACPI Configuration
Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.
PCIE Devices Power On

Allow the system to be waked up by a PCIE device and enable wake on LAN.
I219 LAN Power On

Allow the system to be waked up by the Onboard Intel LAN.
RTC Alarm Power On

Allow the system to be waked up by the real time clock alarm. Set it to By OS to let
it be handled by your operating system.
USB Keyboard/Remote Power On

Allow the system to be waked up by an USB keyboard or remote controller.
USB Mouse Power On

English
Allow the system to be waked up by an USB mouse.
79
4.6.6 USB Configuration
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.
English
80
4.6.7 Trusted Computing
NOTE: Options vary depending on the version of your connected TPM module.
Security Device Support

Use this item to enable or disable BIOS support for security device. O.S. will not
show Security Device. TCG EFI protocol and INT1A interface will not be available.
Active PCR banks

This item displays active PCR Banks.
Available PCR Banks

This item displays available PCR Banks.
SHA256 PCR Bank

Use this item to enable or disable SHA256 PCR Bank.
SHA384 PCR Bank

Use this item to enable or disable SHA384 PCR Bank.
SM3_256 PCR Bank

English
Use this item to enable or disable SM3_256 PCR Bank.
Pending Operation
Schedule an Operation for the Security Device.
81
NOTE: Your computer will reboot during restart in order to change State of the
Device.
Platform Hierarchy
Use this item to enable or disable Platform Hierarchy.
Storage Hierarchy
Use this item to enable or disable Storage Hierarchy.
Endorsement Hierarchy
Use this item to enable or disable Endorsement Hierarchy.
Physical Presence Spec version

Select this item to tell OS to support PPI spec version 1.2 or 1.3. Please note that
some HCK tests might not support version 1.3.
TPM 2.0 InterfaceType (CRB)

Select the Communication Interface to TPM 2.0 Device
Device Select
Use this item to select the TPM device to be supported. TPM 1.2 will restrict
support to TPM 1.2 devices. TPM 2.0 will restrict support to TPM 2.0 devices. Auto
will support both with the default set to TPM 2.0 devices. If TPM 2.0 devices are
not found, TPM 1.2 devices will be enumerated.
English
82
4.7 Tools
ASRock Polychrome RGB

Select LED lighting color.
UEFI Tech Service

Contact ASRock Tech Service if you are having trouble with your PC. Please setup
network configuration before using UEFI Tech Service.
Easy RAID Installer

Easy RAID Installer helps you to copy the RAID driver from the support CD to
your USB storage device. After copying the drivers please change the SATA mode
to RAID, then you can start installing the operating system in RAID mode.
SSD Secure Erase Tool

All the SSD's listed that supports Secure Erase function.
NVME Sanitization Tool

After you Sanitize SSD, all user data will be permanently destroyed on the SSD and
English
cannot be recovered.
Instant Flash
Save UEFI files in your USB storage device and run Instant Flash to update your
83
UEFI.
Intel MEI Flash

Starts BIOS recovery flash.
Internet Flash - DHCP (Auto IP), Auto

ASRock Internet Flash downloads and updates the latest UEFI firmware version
from our servers for you. Please setup network configuration before using Internet
Flash.
*For BIOS backup and recovery purpose, it is recommended to plug in your USB
pen drive before using this function.
Network Configuration
Use this to configure internet connection settings for Internet Flash.
Internet Setting
Enable or disable sound effects in the setup utility.
UEFI Download Server

Select a server to download the UEFI firmware.
English
84
4.8 Hardware Health Event Monitoring Screen

This section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.
Fan Tuning
Measure Fan Min Duty Cycle.
Fan-Tastic Tuning
Select a fan mode for CPU Fan, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.
CPU Fan 1 Setting

Select a fan mode for CPU Fan 1, or choose Customize to set 5 CPU temperatures
CPU Fan 1 Step Up

Set the value of CPU Fan 1 Step Up.
CPU Fan 1 Step Down

English
Set the value of CPU Fan 1 Step Down.
CPU_FAN2 / W_PUMP Switch

Switch CPU_FAN2 / W_PUMP header function.
85
CPU Fan 2 Control Mode
Select DC/PWM mode for CPU Fan 2.
CPU Fan 2 Setting

Select a fan mode for CPU Fan 2, or choose Customize to set 5 CPU temperatures and
assign a respective fan speed for each temperature.
CPU Fan 2 Temp Source

Select a fan temperature source for CPU Fan 2.
CPU Fan 2 Step Up

Set the value of CPU Fan 2 Step Up.
CPU Fan 2 Step Down

Set the value of CPU Fan 2 Step Down.
CHA_FAN1 / W_PUMP Switch

Select Chassis Fan 1 or Water Pump mode.
Chassis Fan 1 Control Mode

Select PWM mode or DC mode for Chassis Fan 1.
Chassis Fan 1 Setting

Select a fan mode for Chassis Fan 1, or choose Customize to set 5 CPU temperatures
Chassis Fan 1 Temp Source

Select a fan temperature source for Chassis Fan 1.
Chassis Fan 1 Step Up

Set the value of Chassis Fan 1 Step Up.
Chassis Fan 1 Step Down

Set the value of Chassis Fan 1 Step Down.

English

86

Select a fan mode for Chassis Fan 2, or choose Customize to set 5 CPU
temperatures and assign a respective fan speed for each temperature.











English

87



Over Temperature Protection

When Over Temperature Protection is enabled, the system automatically shuts
down when the motherboard is overheated.
Case Open Feature

Enable or disable Case Open Feature to detect whether the chassis cover has been
removed.
English
88
4.9 Security Screen

In this section you may set or change the supervisor/user password for the system.
You may also clear the user password.
Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.
User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.
Secure Boot
Use this item to enable or disable support for Secure Boot.
Intel(R) Platform Trust Technology

Enable/disable Intel PTT in ME. Disable this option to use discrete TPM Module.
English
89
4.10 Boot Screen
This section displays the available devices on your system for you to configure the
boot settings and the boot priority.
Fast Boot
Fast Boot minimizes your computer's boot time. In fast mode you may not boot
from an USB storage device. The VBIOS must support UEFI GOP if you are using
an external graphics card. Please notice that Ultra Fast mode will boot so fast that
the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart
to UEFI utility in Windows.
Boot From Onboard LAN

Allow the system to be waked up by the onboard LAN.
Setup Prompt Timeout

Configure the number of seconds to wait for the setup hot key.
Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots up.
Boot Beep
English
Select whether the Boot Beep should be turned on or off when the system boots up. Please
note that a buzzer is needed.
90
Full Screen Logo

Enable to display the boot logo or disable to show normal POST messages.
AddOn ROM Display

Enable AddOn ROM Display to see the AddOn ROM messages or configure the
AddOn ROM if you've enabled Full Screen Logo. Disable for faster boot speed.
Boot Failure Guard Message

If the computer fails to boot for a number of times the system automatically
restores the default settings.
Boot Failure Guard Count

Configure the number of attempts to boot until the system automatically restores
the default settings.
CSM (Compatibility Support Module)
CSM
Enable to launch the Compatibility Support Module. Please do not disable unless
you’re running a WHCK test.
English
Launch PXE OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
91
execute both legacy and UEFI option ROM.
Launch Storage OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
execute both legacy and UEFI option ROM.
Other PCI Device ROM Priority

For PCI devices other than Network. Mass storage or Video defines which OpROM
to launch.
English
92
4.11 Exit Screen
Save Changes and Exit

When you select this option the following message, “Save configuration changes
and exit setup?” will pop out. Select [OK] to save changes and exit the UEFI SETUP
UTILITY.
Discard Changes and Exit

When you select this option the following message, “Discard changes and exit
setup?” will pop out. Select [OK] to exit the UEFI SETUP UTILITY without saving
any changes.
Discard Changes
When you select this option the following message, “Discard changes?” will pop
out. Select [OK] to discard all changes.
Load UEFI Defaults

Load UEFI default values for all options. The F9 key can be used for this operation.
Launch EFI Shell from filesystem device

Copy shellx64.efi to the root directory to launch EFI Shell.
English
93
Version 1.1
Published July 2022
Copyright©2022 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from
any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
INTEL END USER SOFTWARE LICENSE AGREEMENT
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software
only in its unmodified and binary form, (with the accompanying documentation, the
“Software”) for Licensee’s personal use only, and not commercial use, in connection with
Intel-based products for which the Software has been provided, subject to the following
conditions:
(a) Licensee may not disclose, distribute or transfer any part of the Software, and You
agree to prevent unauthorized copying of the Software.
(b) Licensee may not reverse engineer, decompile, or disassemble the Software.
(c) Licensee may not sublicense the Software.
(d) The Software may contain the software and other intellectual property of third party
suppliers, some of which may be identified in, and licensed in accordance with, an en-
closed license.txt file or other text or file.
(e) Intel has no obligation to provide any support, technical assistance or updates for the
Software.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software
remains with Intel or its licensors or suppliers. The Software is copyrighted and protected
by the laws of the United States and other countries, and international treaty provisions.
Licensee may not remove any copyright notices from the Software. Except as otherwise
expressly provided above, Intel grants no express or implied right under Intel patents,
copyrights, trademarks, or other intellectual property rights. Transfer of the license ter-
minates Licensee’s right to use the Software.
DISCLAIMER OF WARRANTY. The Software is provided “AS IS” without warranty of
any kind, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PUR-
POSE.
LIMITATION OF LIABILITY. NEITHER INTEL NOR ITS LICENSORS OR SUPPLIERS
WILL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF
BUSINESS, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAG-
ES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN
IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
LICENSE TO USE COMMENTS AND SUGGESTIONS. This Agreement does NOT
obligate Licensee to provide Intel with comments or suggestions regarding the Software.
However, if Licensee provides Intel with comments or suggestions for the modification,
correction, improvement or enhancement of (a) the Software or (b) Intel products or pro-
cesses that work with the Software, Licensee grants to Intel a non-exclusive, worldwide,
perpetual, irrevocable, transferable, royalty-free license, with the right to sublicense,
under Licensee’s intellectual property rights, to incorporate or otherwise utilize those
comments and suggestions.
TERMINATION OF THIS LICENSE. Intel or the sublicensor may terminate this license
at any time if Licensee is in breach of any of its terms or conditions. Upon termination,
Licensee will immediately destroy or return to Intel all copies of the Software.
THIRD PARTY BENEFICIARY. Intel is an intended beneficiary of the End User License
Agreement and has the right to enforce all of its terms.
U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as
defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial
computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent
with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide
the Software to the U.S. Government. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95054.
EXPORT LAWS. Licensee agrees that neither Licensee nor Licensee’s subsidiaries will
export/re-export the Software, directly or indirectly, to any country for which the U.S.
Department of Commerce or any other agency or department of the U.S. Government
or the foreign government from where it is shipping requires an export license, or other
governmental approval, without first obtaining any such required license or approval. In
the event the Software is exported from the U.S.A. or re-exported from a foreign destina-
tion by Licensee, Licensee will ensure that the distribution and export/re-export or import
of the Software complies with all laws, regulations, orders, or other restrictions of the U.S.
Export Administration Regulations and the appropriate foreign government.
APPLICABLE LAWS. This Agreement and any dispute arising out of or relating to it will
be governed by the laws of the U.S.A. and Delaware, without regard to conflict of laws
principles. The Parties to this Agreement exclude the application of the United Nations
Convention on Contracts for the International Sale of Goods (1980). The state and federal
courts sitting in Delaware, U.S.A. will have exclusive jurisdiction over any dispute aris-
ing out of or relating to this Agreement. The Parties consent to personal jurisdiction and
venue in those courts. A Party that obtains a judgment against the other Party in the
courts identified in this section may enforce that judgment in any court that has jurisdic-
tion over the Parties.
Licensee’s specific rights may vary from country to country.
WARNING
THIS PRODUCT CONTAINS A BUTTOON BATTERY
If swallowed, a button battery can cause serious injury or death.
Please keep batteries out of sight or reach of children.
CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related UKCA Directives. Full text of UKCA
declaration of conformity is available at: http://www.asrock.com
ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related Directives. Full text of EU declaration of
conformity is available at: http://www.asrock.com
ASRock follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASRock product is in line with
global
environmental regulations. In addition, ASRock disclose the relevant information based
on regulation requirements.
Please refer to https://www.asrock.com/general/about.asp?cat=Responsibility for informa-
tion disclosure based on regulation requirements ASRock is complied with.
DO NOT throw the motherboard in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.

Z690M Phantom Gaming 4

Uploaded by

Copyright:

Available Formats

Z690M Phantom Gaming 4

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Z690M Phantom Gaming 4

Uploaded by

Copyright:

Available Formats

Contact Information

ASRock EUROPE B.V.

ASRock America, Inc.

1.3 Motherboard Layout 6

1.4 I/O Panel 8

2.2 Installing the CPU Fan and Heatsink 13

2.3 Installing Memory Modules (DIMM) 14

2.4 Expansion Slots (PCIe Slots) 16

2.5 Jumpers Setup 17

2.6 Onboard Headers and Connectors 18

2.7 Post Status Checker 24

2.8 CrossFireX TM and Quad CrossFireX TM Operation Guide 25

2.8.1 Installing Two CrossFireX TM-Ready Graphics Cards 25

2.8.2 Driver Installation and Setup 27

2.9 M.2 WiFi/BT PCIe WiFi Module Installation Guide 28

2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1) 30

2.11 M.2_SSD (NGFF) Module Installation Guide (M2_2) 33

Chapter 3 Software and Utilities Operation 37

3.2 ASRock Motherboard Utility (Phantom Gaming Tuning) 38

3.3.3 BIOS & Drivers 45

3.4 Nahimic Audio 47

3.5 ASRock Polychrome SYNC 48

Chapter 4 UEFI SETUP UTILITY 51

4.3 Advanced Mode 53

4.3.1 UEFI Menu Bar 53

4.3.2 Navigation Keys 54

4.4 Main Screen 55

4.5 OC Tweaker Screen 56

4.6 Advanced Screen 71

4.6.1 CPU Configuration 72

4.6.2 Chipset Configuration 74

4.6.3 Storage Configuration 77

4.6.4 Intel(R) Thunderbolt 78

4.6.5 ACPI Configuration 79

4.6.6 USB Configuration 80

4.6.7 Trusted Computing 81

4.9 Security Screen 89

4.10 Boot Screen 90

4.11 Exit Screen 93

In this documentation, Chapter 1 and 2 contains the introduction of the

1.1 Package Contents

Platform • Micro ATX Form Factor

Chipset • Intel® Z690

Memory • Dual Channel DDR4 Memory Technology

Expansion • 2 x PCIe x16 Slots (PCIE1/PCIE3: single at Gen4x16 (PCIE1);

can be supported only with processors which are GPU

Audio • 7.1 CH HD Audio (Realtek ALC897 Audio Codec)

LAN • Gigabit LAN 10/100/1000 Mb/s

Rear Panel • 3 x Antenna Mounting Points

Storage • 4 x SATA3 6.0 Gb/s Connectors

RAID • Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA

BIOS • AMI UEFI Legal BIOS with multilingual GUI support

PROC, +1.8V PROC, +0.82V PCH, +1.05V PCH Voltage

Hardware • Fan Tachometer: CPU, CPU/Water Pump, Chassis/Water

OS • Microsoft® Windows® 11 / 10 64-bit

* For detailed product information, please visit our website: http://www.asrock.com

No. Description No. Description

Activity / Link LED Speed LED

** Function of the Audio Ports in 7.1-channel Configuration:

Light Blue (Rear panel) Rear Speaker Out