Alpha Wi
Alpha Wi
Alpha Wi
Alpha Wi
Portable Echo Sounder
Single Person Sounding System | Echo Sounder + Host + Power Supply + RTK all integrated
Alpha Wi Portable Echo Sounder
Alpha Wi portable echo sounder can survey areas with depth range up to 200m. With design,
it can be quickly assembled and measured on site by a single person. It can be easily set and
ready for work. With the standard marine fixing assembly, Alpha Wi can be easily fixed on
the manned shipside or unmanned device.
Alpha Wi portable echo sounder consists of five parts: antenna, host, probe, rugged tablet,
and rod. The host has integrated radio, 4G, RTK, sonar solution, power supply system. There
is wireless connection between PDA and echo sounder host.
IP68
Multi-source RTCM
Alpha Wi supports Ntrip, Base
stations, PPK post-processing, and
high-precision Beidou position. It
solves the problem of difficult
fixation of the sea measurements
and uninhabited areas, and ensure
good performance for all scenarios. Receive RTCM from Base station PPK post-processing
Applicable platform
Beam Angle 8°
Resolution 8mm
Echo Sounder
Max Ping Rate 20Hz
Receiver ×1
Max Speed 10 knots
Charger ×1
Charger Cable ×1 Sonar Size Ø70mm*105mm
Data Cable ×1
UHF Antenna ×2 Screen 8 inches (1920*1200)
Carrying Case ×1
Rod ×3 Rugged Table Battery 11800mAh
Adapter for Probe ×1 Network 4G
Tip ×1
Clip ×1 Processor Cortex-A72
GNSS Antenna ×1
GNSS Connect Cable ×1
RAM 4G
Rugged Table ×1 System GPS、GLONASS、BDS、GALILEO、QZSS
GNSS
Manual ×1 Configuration
WiFi 2.4/5GHz IEEE 802.11b/g/n/ac
Network 4G
Description
TRIMTALK450S、TRIMMARKⅢ、
Protocol SOUTH9600、SOUTH19200
TRANSEOT、SATEL
Radio
Frequency 410-470MHz
Input 18W PD
Power
Sonar Performance Capacity 10000mAh
The sounding effect is better TNC GNSS*1、4G*1、WiFi*1
when it works at static, pure,
and deep probe draft areas. 5 Pin For external data transmission
Other wise, the data indicators
will decease. Port Indicator 7 Pin RS232*1、RJ45*1
Proof IP68
*The above technical parameters are for your reference.The company reserves the right to change the design
and planning of the product based on the actual product.