Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
10 views

tutorial OCR

Uploaded by

Rayhana Karar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
10 views

tutorial OCR

Uploaded by

Rayhana Karar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

(1) An IDMT over current relay has a plug setting of 150% and has a time setting of 0.5.

The relay is connected


in the circuit through a C.T. having ratio 500/5 A. Calculate the time of operation of the relay if the circuit
carries a fault current of 6000 A. The relay characteristic is shown in the Table (1).

(2) Reference Figure (1) Given that: Fault current = 2000 A, CT Ratio: 200/1 A, Relay 1 set on 100% , Relay
2 set on 125%. For discrimination the time grading margin between the relays is 0.5 sec. Determine the time
of operation of the two relays assuming the relays have the characteristic as shown in Table (1) and that the
relay no.1 has a time setting = 0.2.

You might also like