325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP2435 ...

Page 1 of 7

Shutdown SIS

Previous Screen

Product: EXCAVATOR
Model: 325B L EXCAVATOR 2JR02345
Configuration: 325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine

Testing and Adjusting

308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B
Excavators Engine and Pump Control
Media Number -RENR1998-06 Publication Date -01/10/2004 Date Updated -06/10/2004

i01768419

Using Service Mode

SMCS - 7569

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/10/2020
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP2435 ... Page 2 of 7

Illustration 1 g00904377

Monitor Panel

(1) Action lamp

(2) Character display

(3) Fuel gauge

(4) Hydraulic oil temperature gauge

(5) Engine coolant temperature gauge

(6) Charge alert indicator

(7) Alert indicator for the engine oil pressure

(8) Alert indicator for the hydraulic oil temperature

(9) Alert indicator for the engine coolant temperature

(10) Clogged air filter indicator

(11) Indicator for a hydraulic return filter that is clogged

(12) Controller alert indicator

(13) Monitor alert indicator

(14) Air heater indicator

(15) Fuel level alert

(16) Hydraulic oil level alert

(17) Engine oil level alert

(18) Alert indicator for the engine coolant level

(19) Power mode switch

(20) AEC switch

(21) Travel speed control switch

(22) Travel alarm cancel switch

(23) Boom priority mode switch

(24) Swing priority mode switch

(25) Fine control mode switch

(26) User mode switch

(27) Pictograph symbol

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/10/2020
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP2435 ... Page 3 of 7

The Electronic Monitor Panel will activate. Then, the monitor will display the output that is received
from the controller. The Controller Service Program is divided into five functions. Each function is
listed:

• Alerting the presence of abnormal engine operation

• Displaying the machine conditions (engine speed, hydraulic oil temperature, power shift
pressure, etc)

Service codes: 10 to 21.

• Displaying the existing electronic problems or the past electronic problems

Service codes: 18, 19, 1c, 1d

• The electronic control components are adjusted and tested. The adjustment codes are listed: 70
and 71. The test codes are listed: 60, 61, 62, 66 and 67.

• Changes in various defaults in the controller

Service codes: 80 to 8A

You should depress the switches on the monitor panel in order to start up the service program or the
switches are depressed in order to change the functions. The corresponding switch and/or switches
should be depressed until the required function is displayed on the character display.

Start-Up Of The Service Mode

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/10/2020
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP2435 ... Page 4 of 7

Illustration 2 g00662936

Electronic Monitor Panel

(2) Character display

(22) Travel alarm cancel switch

(23) Boom priority mode switch

(24) Swing priority mode switch

(25) Fine control mode switch

(26) User mode switch

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/10/2020
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP2435 ... Page 5 of 7

Note: The engine can be running or the engine can be stopped, when the "Service Mode" is started.
When the engine is stopped, the starter switch must be in the ON position. You should know the
procedure to start up the "Service Mode" in advance.

1. The following switches should be depressed and held for 2 seconds or more simultaneously:
travel alarm cancel switch (22), fine control mode switch (25) and user mode switch (26) .

2. The time display and the dial display on the character display (2) will change to a "0" and a "0".
The left character position will flash.

3. You need to enter the following security code: OE 32 3A.

Note: The security code must be entered within 10 seconds after the first procedure (1).
Otherwise, the time display will return. You should learn the procedure of entering the security
code in advance.

4. The procedure to input information is listed:

a. The figure that is blinking on the character display (2) can be changed. In order to change
the figure, you should depress the boom priority mode switch (23) or the swing priority
mode switch (24).

◾ The figure that is blinking increases (Boom priority mode switch (23) )

◾ The figure that is blinking decreases (Swing priority mode switch (24) )

The character position that is blinking can be shifted by depressing the fine control mode
switch (25) or the user mode switch (26).

◾ The character position that is blinking shifts to the right (Fine control mode switch
(25) ).

◾ The character position that is blinking shifts to the left (User mode switch (26) ).

5. After you enter the security code, the service mode is activated by depressing and holding the
following switches for 2 seconds or greater: travel alarm cancel switch (22), fine control mode
switch (25) and user mode switch (26). The service mode is automatically activated 10 seconds
after the security code is entered.

6. Now, the "Service Mode" is activated and the character display (2) will display "10" on the left
two character positions and "1" on the right character position.

Changing The Service Mode

1. The boom priority mode switch (23) or the swing priority mode switch (24) is pressed in order
to change the figures that are blinking on character display (2) .

◦ The figure that is blinking increases (Boom priority mode switch (23) )

◦ The figure that is blinking decreases (Swing priority mode switch (24) )

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/10/2020
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP2435 ... Page 6 of 7

2. The position that is blinking on the character display (2) can be shifted by depressing the fine
control mode switch (25) and the user mode switch (26) .

◦ The position that is blinking shifts to the right (Fine control mode switch (25) )

◦ The position that is blinking shifts to the left (Swing priority mode switch (24) )

Note: Refer to the chart of Service Codes for selecting the functions for the "Service Mode".

Table 1
Service
Function
Code
10 Automatic Travel Speed Change
11 Low Temperature Control
12 Engine Speed
13 Engine Coolant Temperature
14 Hydraulic Oil Temperature
16 Digital Input
17 Software Version
18 Real Time Error Code
19 Error Log
1a Engine Speed Dial Setting Check
1b Model Name and Engine Type
1c Real Time Error Code (ATT)
1d Error Log (ATT)
20 Power Shift Pressure Command Signal
21 Displays Higher Delivery Pressure Of Main Pumps
60 Proportional Reducing Valve Sweep Test
61 Governor Actuator Sweep Test
62 ON/OFF Test Of Digital Output
66 Fixed Power Shift Pressure
67 Engine Speed Change
70 Governor Actuator Calibration

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/10/2020
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP2435 ... Page 7 of 7

71 Proportional Reducing Valve Calibration

80 Setting Of Hydraulic Oil Type Mineral Or Biological
81 Setting Of AEC Speed
82 Setting Of AEC Delay Time
83 Setting Of Memory Mode
84 Setting Of Reduced Horsepower For Attachment Pump
85 Setting Of Engine Speed For Low Idle Switch
86 Setting Of Pump Quantity For Hammer Mode
87 Setting Of Hammer Circuit Pressure
88 Setting Of Pump Flow For Hammer Mode
8a Setting Of Power Offset For Attachment Pump
8b Change Of Preset Conditions Of Main Pump Output
Change Of Upper Limits Of Preset Conditions Of Main Pump Output (Such As
8c
Power Mode Or Engine Speed At Dial Position 10)

Procedure To Stop The Service Mode

Note: One of the following two methods should be used.

1. Turn the starter switch to the OFF position.

2. The following switches should be depressed and held simultaneously for 2 second or more:

(22) Travel alarm cancel switch

(25) Fine control mode switch

(26) User mode switch

The service mode has been stopped, if the character display shows the position of the engine
speed dial on the right two character positions and the time is shown on the left four character
positions.

Copyright 1993 - 2020 Caterpillar Inc. Sun May 10 21:27:41 UTC+0300 2020
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/10/2020