8 7 6 5 4 3 2 1

PARTS LIST
ITEM TITLE QTY DESCRIPTION PART NUMBER
1 SPINDLE SHAFT 1 A2-4 LATHE SPINDLE BE-TQI-0023-002
2 FRONT BEARING COVER 1 A2-4 LATHE SPINDLE BE-TQI-0023-006
F F
3 SPINDLE MAIN BODY 1 A2-4 LATHE SPINDLE BE-TQI-0023-003
4 M55 LOCK NUT - OD 87 W 25 1 A2-4 LATHE SPINDLE BE-TQI-0023-008
5 MAIN BODY REAR COVER 1 A2-4 LATHE SPINDLE BE-TQI-0023-007
6 FRONT COVER 1 A2-4 LATHE SPINDLE BE-TQI-0023-005
7 REAR BEARING 2 Angular Contact Ball Bearing JIS B 1522- 7011 66 X 90 X 18
8 FRONT BEARING 4 Angular Contact Ball Bearing JIS B 1522 - 7014 70 x 110 x 20
9 KMT LOCK NUT 1 A2-4 LATHE SPINDLE BE-LOCKNUT-KMT 14
10 12 Hexagon Socket Head Cap Screw ISO 4762 - M8 x 35
11 6 Hexagon Socket Head Cap Screw ISO 4762 - M6 x 16

E E
322 OVERALL
263 59
11 THRU 48 25 SPACER OPTION
17.5 11 A 13
(3/2) OPTION IS AVAILABLE (
152 h6 152.00
151.98)
131 PCD 3

7 THRU
11 9 170 PCD

D D

)
A2-4 TAPER

50 h6 50.00
49.98
63.513
195

40.2

(
C C

4 1

6 7 5

A
2
8 2 28-05-2019 FIRST RELEASE YOGESH
NOTE: REV DATE DESCRIPTION DESIGNER
B 1. MATERIAL : REFER DRAWINGS. B
SECTION A-A THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION. ALL RIGHTS (INCLUDING
2. ID TAPER : A2-4 COPYRIGHT, CONFIDENTIAL INFORMATION, TRADE SECRETS AND DESIGN RIGHTS)
3. LOCATING DIA : 152 h6 x 162 SCALE 1 / 1.5
ARE OWNED BY TRIQUENCH INDIA. NO USE OR DISCLOSURE IS TO BE MADE
4. BORE DIAMETER : 38 mm WITHOUT PRIOR WRITTEN PERMISSION OF TRIQUENCH INDIA. COPYRIGHT 2018
5. FRONT BEARING : (REFER PARTLIST) TRIQUENCH INDIA, ALL RIGHTS RESERVED.
6. REAR BEARING : (REFER PARTLIST)
7. SPINDLE MOUNTING : CB 18 x 11mm, THROUGH ON PCD 170. CUSTOMER:
8. LUBRICATION : GREESE PACKED. TRIQUENCH INDIA
9. MAX RPM : 5000. PROJECT: A2-4 LATHE SPINDLE ASSEMBLY
10. UNLLESS OTHERWISE STATED, GENERAL TOLERANCE ARE AS PER STANDARD.
11. BREAK ALL SHARP EDGES. TITLE:
12. WEIGHT OF COMPONENT : N/A. A2-4 LATHE SPINDLE ASSEMBLY
13. DO NOT SCALE OR MANUALY MEASURE DIMENSIONS.
A 14. DIMENSIONS STATED IN DRAWINGS ARE AFTER FINAL PROCESS. GENERAL ARRANGEMENT A
15. SCHEMATIC DIAGRAM ONLY, FOR LAYOUT AND CONCEPT PURPOSE.
16. FINAL DESIGN MAY CHANGE AS PER TECHNICAL REQUIREMENTS AFTER APPROVAL. DRAWING NUMBER:BE-TQI-0023-001 Rev.:02
ALL DIMENSIONS ARE IN MM. SHEET NO. 1 OF 1
8 7 6 5 4 3 2 1