The Trio MR450 is a compact digital data radio designed for reliable serial communications in telemetry and remote SCADA systems, particularly for water and electricity utilities. It features advanced capabilities such as ChannelShare, MultiStream, and compatibility with various industrial data protocols, along with robust diagnostics and configuration options. The device operates in multiple modes and supports a wide frequency range, making it versatile for various applications.
The Trio MR450 is a compact digital data radio designed for reliable serial communications in telemetry and remote SCADA systems, particularly for water and electricity utilities. It features advanced capabilities such as ChannelShare, MultiStream, and compatibility with various industrial data protocols, along with robust diagnostics and configuration options. The device operates in multiple modes and supports a wide frequency range, making it versatile for various applications.
The Trio MR450 is a compact digital data radio designed for reliable serial communications in telemetry and remote SCADA systems, particularly for water and electricity utilities. It features advanced capabilities such as ChannelShare, MultiStream, and compatibility with various industrial data protocols, along with robust diagnostics and configuration options. The device operates in multiple modes and supports a wide frequency range, making it versatile for various applications.
The Trio MR450 is a compact digital data radio designed for reliable serial communications in telemetry and remote SCADA systems, particularly for water and electricity utilities. It features advanced capabilities such as ChannelShare, MultiStream, and compatibility with various industrial data protocols, along with robust diagnostics and configuration options. The device operates in multiple modes and supports a wide frequency range, making it versatile for various applications.
The Trio™ MR450 professional compact digital data radio provides cost-effective and dependable serial communications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems, particularly in demanding water and electricity utility applications.
Easy to configure and use, yet highly versatile, the MR450 has advanced features such as ChannelShare™, MultiStream™, single channel simplex store and forward repeating, compatibility with all leading industrial data protocols such as DNP3, ModbusTM, IEC870-5-101, etc., and powerful remote diagnostics.
The MR450 is supported by the Trio Q family of full duplex base and repeater stations, including a redundant hot standby version. se.com 2
Trio MR450 Licensed Serial Data Radio
Specifications – MR450
Radio
Frequency Range 395...470 MHz (M-Band) or 450...520 MHz (H-Band)
Frequency Splits Various Tx/Rx frequency splits - configurable
Channel Selection 6.25 kHz channel step
Channel Spacing 12.5 and 25 kHz
Frequency Accuracy ±1 ppm, -30...+60 °C (-22...140 °F) ambient
Aging <=1 ppm/annum
Radio Modes Simplex and Half duplex
Configuration All configuration via Windows®-based software
Transmitter
Tx Power 0.1...5 W (+20...+37 dBm) +/- 1 dB configurable with over-temperature protection
Modulation Configurable narrow band digitally filtered binary GMSK
Timeout Timer Configurable 0...255 seconds
Tx Spurious <= -37 dBm
PTT Control Auto (Data) / RTS line
Receiver
Sensitivity -116 dBm for 12 dB SINAD
Selectivity Better than 60 dB
Intermodulation Better than 65 dB
Spurious Response Better than 70 dB
Mute Configurable digital mute
se.com 3
Trio MR450 Licensed Serial Data Radio
Specifications – MR450 – continued
Connections
Serial Data Port RS232 DB9 female DCE. 300...38,400 bps asynchronous
Serial Data Interface 3-wire data interface (TxD, RxD & GND)
Serial Data Port DCD Control Configurable DCD operation: activated on RF carrier or from user data output
RS232 19,200 bps (Shared on Data Port), for configuration and diagnostics. Y-Cable supplied for System Port seperating Serial Data Port & Systems Port
Antenna 1 x N female bulkhead
Power 2-pin locking, mating connector supplied
LED Display Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs
Modem
• Radio Model 003 : FCC (IC) 9600 bps (12.5 kHz) North America • Radio Model 004 : ETSI R&TTED 1995/5/EC 4800 bps (12.5 kHz) RF Channel Data Rate1 • Radio Model 001 : ACMA 2400 bps (12.5 kHz) / 4800 bps (25 kHz) Australia • Radio Model 002 : ACMA 4800 bps (12.5 kHz) / 9600 bps (25 kHz) Australia
Operating Modes Base, remote, repeater or store and forward
Data Buffer 8 kbyte of on-board RAM
Channelshare Trio’s unique supervisory collision avoidance system
Simultaneous data stream delivery allows for multiple vendor devices/protocols to be transported on Multistream the one radio network
Firmware Local flash-based firmware updates
Diagnostics
• TVIEW+TM configuration, network management and diagnostic Windows®-based GUI software
• Network-wide operation from any remote terminal • Non intrusive protocol – runs simultaneously with the application • Over-the-air re-configuration of user parameters. • Storage of data error and channel occupancy statistics Diagnostics Overview • In-built Error Rate testing capabilities • Diagnostics parameters available • Transmitter Power • Received Signal Strength • DC Supply Voltage • Radio Temperature se.com 4
Trio MR450 Licensed Serial Data Radio
Specifications – MR450 – continued
General
Operating Temperature Range -30...+60 °C (-22...+140 °F)
Power Supply 13.8 Vdc nominal (10...16 Vdc)
Transmit Current 600 mA nominal @ 1 W, 1500 mA nominal @ 5 W
Receive Current <170 mA nominal @ 13.8 Vdc
Housing & Dimensions Rugged die-cast, 154 mm wide x 102 mm high x 29 mm deep (6.1 in. x 4.1 in. x 1.2 in.)
Integral mounting feet (standard) or DIN Rail mounting (requires DIN mounting kit, see Trio accessories Mounting datasheet for more information)
Weight 0.32 kg (0.71 Ibs)
Approvals and Certifications
ETSI ETSI R&TTED 1995/5/EC, EN300113, EN301489, EN60950
FCC FCC PART 15, PART 90
Industry Canada IC RS119, ICES-001
Australia ACMA AS4295-1995 (Data)
Hazardous Locations CSA Class I, Division II, Groups (A,B,C,D) for Hazardous Locations ANSI/UL equivalent
Footnotes: Note. Export restrictions may apply. 1. Local radio regulatory requirements may dictate the actual RF channel data rate and Bit Error Rates available. Contact your local representative for more details on these issues.
Note: Accessories sold separately.
se.com 5
Trio MR450 Licensed Serial Data Radio
Model Code TBURMR450-abbbcde represents the part number matrix
Model Model Type
TBURM M-Series
Code Select: Unit Type
R Remote Station with full enclosure
Code Select: Generic Frequency Band
450 395...520 MHz
Code Select: Frequency (400 MHz bands)
M 395...470 MHz (Tx & Rx)
H 450...520 MHz (Tx & Rx)
Code Select: RF Channel Data Rate & Bandwidth (Internal Modem)
TBURMR450-aabbbcde represents the part number matrix
Code Select: Hazardous Area Approvals
H Hazardous Environment Class1 Div2
Code Select: Reserved For Future Use
O Reserved for future use
Example: TBURMR450-M003DH0 specifies: Trio M-Series, Remote Station, Generic 450 MHz band with a specific frequency range of 395... 470 MHz, a 9600 bps modem with a bandwidth of 12.5 kHz, Diagnostics, Class I Div2.
Communications Standards: FCC – Federal Communications Commission (USA) IC – Industry Canada ETSI – European Telecommunication Standards Institute ACMA – Australian Communications and Media Authority
Contact your local sales office for accessories.
se.com 7
Trio MR450 Licensed Serial Data Radio
Dimensions – MR450
146 mm (5.75 in.)
MTG. HOLES
102 mm Trio MR450 (4.02 in.) 50 mm (1.97 in.) 88 mm MTG. HOLES (3.46 in.)
Ø 4.0 mm (Ø 0.16 in.)
4 PLCS
154 mm (6.06 in.)
140 mm (5.51 in.)
WARNING - EXPLOSION HAZARD
Antenna 10-16 Vdc Do not disconnect while circuits are live Data Port unless area is known to be non-hazardous
Green > Pwr Synch RxD
28 mm 30 mm (1.10 in.) (1.18 in.) Red > Tx RxSig TxD Trio MR450
Footnote: This product is not RoHS-compliant. Accessories sold separately.
Disclaimer: Not all product features are available in every mode of operation. Schneider Electric reserves the right to change product specifications. For more information visit www.se.com.
Schneider Electric Systems USA
Process Automation SCADA & Telemetry
38 Neponset Avenue, Foxboro, Massachusetts 02035 USA Direct Worldwide: +1 (613) 591-1943 Email: telemetrysolutions@se.com Fax: +1 (613) 591-1022 Toll Free within North America: +1 (888) 267-2232 www.se.com
