WBSETCL_JE_Grade-II_14_March_2022_Shift_2
WBSETCL_JE_Grade-II_14_March_2022_Shift_2
WBSETCL_JE_Grade-II_14_March_2022_Shift_2
com/bQQ2EkH1bpb
Domain Knowledge
Section Id : 753229524
Section Number : 1
Section type : Online
Mandatory or Optional : Mandatory
Number of Questions : 60
Page- 1
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 1 Question Id : 75322911034 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
How is the electric field represented in electrostatics?
Options :
1. By electric flux lines
2. By electric flux density
3. By electric field intensity
4. By electrical conductivity area
Question Number : 2 Question Id : 75322911035 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Two capacitors having capacitance of 6 µfd and 10 µfd, respectively, are connected in series across a 320 V supply. Find the charge on
each 10 µfd capacitor.
Options :
1. 0.0012 C
2. 0.00192 C
3. 0.0032 C
4. 0.00512 C
Question Number : 3 Question Id : 75322911036 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
A copper coil has a resistance of 20 Ω at 0 °C. Find the resistance of the coil at 25 °C. The remp co-efficient of copper is 0.0042 at 0 °C.
Options :
1. 20.105 Ω
2. 21.05 Ω
3. 22.1 Ω
4. 41 Ω
Question Number : 4 Question Id : 75322911037 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is an active network?
Options :
1. Resistor
2. Inductor
3. Capacitor
4. Transistor
Question Number : 5 Question Id : 75322911038 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Page- 2
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
The alternating current passing through a circuit is given by i = 141.4 sin 314.2t. Calculate the RMS value of the current.
Options :
1. 45 A
2. 90 A
3. 100 A
4. 141.4 A
Question Number : 6 Question Id : 75322911039 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
A coil having a resistance of 4 Ω and an inductance of 4 mH is connected in series with a 10 µfd capacitor. Calculate the Q-factor of the
coil.
Options :
1. 1.58
2. 2.5
3. 5
4. 10
Question Number : 7 Question Id : 75322911040 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
A coil having a resistance of 2 Ω and an inductance of 4 mH is connected in series with a 10 µfd capacitor. Calculate the Q factor.
Options :
1. 12
2. 10
3. 5
4. 2.5
Question Number : 8 Question Id : 75322911041 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
What are the four terminals in a 4-point DC motor starter?
Question Number : 9 Question Id : 75322911042 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
The no-load ratio required in a single-phase 50Hz transformer is 4440/404 V. If the maximum value of flux in the core is to be about
0.08 Wb, find the number of turns in primary winding.
Options :
1. 600
2. 372
3. 250
4. 150
Page- 3
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 10 Question Id : 75322911043 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is NOT true for the shell type transformer?
Options :
1. A core has three limbs.
2. Both HV and LV windings are placed on a central limb.
3. The coils used are of cylindrical type.
4. A magnetic circuit is divided in two or more parts.
Question Number : 11 Question Id : 75322911044 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is NOT true for the cylindrical rotor when compared to the salient pole rotor?
Options :
1. Rotor causes no speed fluctuation
2. Air gap is non-uniform
3. Windage loss is less
4. Suitable for high speed operation
Question Number : 12 Question Id : 75322911045 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is true for the shaded pole induction motor?
Options :
1. High power factor
2. Very high starting torque
3. Vary high efficiency
4. Highly economical
Question Number : 13 Question Id : 75322911046 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
A 3-phase 208 V 60 Hz 6 pole star connected induction motor delivers 15 kW. Find the slip if rotor speed 1116 RPM.
Options :
1. 0.05
2. 0.07
3. 0.1
4. 0.14
Question Number : 14 Question Id : 75322911047 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is NOT true for the slip ring induction motor when compared to the squirrel cage induction motor?
Options :
1. Construction is complicated due to the presence of slip ring and brushes.
2. The rotor winding is similar to the stator winding.
3. Rotor copper losses are high and hence less efficient.
4. Speed control by the rotor resistance method is not possible.
Question Number : 15 Question Id : 75322911048 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Page- 4
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following statements is true for the synchronous motor?
Options :
1. Speed decreases with load
2. Operate at lagging power factor
3. Economical for speeds above 600RPM
4. Requires DC excitation at rotor
Question Number : 16 Question Id : 75322911049 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
A stepper motor has a step angle of 2.5°. Determine the resolution.
Options :
1. 36 steps/revolution
2. 72 steps/revolution
3. 108 steps/revolution
4. 144 steps/revolution
Question Number : 17 Question Id : 75322911050 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is used as the string type formatted input function in C programming?
Options :
1. Scanf()
2. Gets()
3. Puts()
4. Putch()
Question Number : 18 Question Id : 75322911051 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following statements is NOT true for pertaining to the pointer in C programming?
Options :
1. A pointer variable can be assigned the address of an ordinary variable.
2. An integer quantity can be added to or subtracted from a pointer variable.
3. A pointer variable cannot be assigned a null (zero) value.
4. A pointer variable can be assigned to address of another variable.
Question Number : 19 Question Id : 75322911052 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is true for gravity control as a controlling force for measuring instruments?
Options :
1. It can be used only in vertically mounted instruments.
2. The instrument need not be levelled.
3. It is dependent of temp variations.
4. Since deflection is directly proportional to the current it has a uniform scale.
Question Number : 20 Question Id : 75322911053 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Page- 5
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 21 Question Id : 75322911054 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following CANNOT be a cause for the creeping error in induction type single-phase energy meter?
Options :
1. Over-compensation for friction
2. Extremely low voltage across the potential coil
3. Vibration
4. Stray magnetic fields
Question Number : 22 Question Id : 75322911055 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
What is the term used for the maximum displacement of the oscillating particle from its mean position in Simple harmonic motion?
Options :
1. Amplitude
2. Frequency
3. Period
4. Oscillation
Question Number : 23 Question Id : 75322911056 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following statements is NOT true for the Carnot’s engine?
Options :
1. The cylinder has perfectly heat conducting walls.
2. The cylinder has a perfectly conducting bottom.
3. The cylinder is fitted with non-conducting piston.
4. The cylinder is fitted with friction less piston.
Question Number : 24 Question Id : 75322911057 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is a transducer that converts the speed of rotation directly into an electrical signal?
Options :
1. Potentiometer
2. Moving plate capacitor
3. Moving plate inductor
4. Tachometer
Question Number : 25 Question Id : 75322911058 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Page- 6
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Which of the following characteristics is NOT desirable for the ideal op-amp?
Options :
1. Infinity voltage gain
2. Zero off-set voltage
3. Infinite input impedance
4. Zero slew rate
Question Number : 26 Question Id : 75322911059 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following statements is NOT true pertaining to the skin effect in the AC transmission line?
Options :
1. The skin effect depends on the nature of the material of the conductor.
2. The skin effect is less for the solid conductor than the stranded conductor.
3. The skin effect is negligible when the Conductor diameter is small (< 1cm).
4. The skin effect is negligible when the supply frequency is low (< 50 Hz).
Question Number : 27 Question Id : 75322911060 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following statement is NOT true for HVDC transmission?
Options :
1. Electric power cannot be generated at high DC voltage due to commutation problems.
2. The DC voltage cannot be stepped up for transmission of power at high voltages.
3. The DC switches and circuit breakers have their own limitations.
4. The high voltage DC transmission is affected by the dielectric losses.
Question Number : 28 Question Id : 75322911061 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
How much voltage is applied to the insulator during the puncture voltage test of insulators?
Options :
1. Voltage of 1.2 times of flash over voltage
2. Voltage of 1.3 times of flash over voltage
3. Voltage of 1.5 times of flash over voltage
4. Voltage of 1.7 times of flash over voltage
Question Number : 29 Question Id : 75322911062 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which layer of HV cable is intended to protect the cable from moisture, gases or other damaging liquids (acids or alkalies) in the soil
and atmosphere?
Options :
1. Armouring
2. Bedding
3. Metallic sheath
4. Serving
Question Number : 30 Question Id : 75322911063 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
If the one glass sheet used to sandwich the thin layer of a liquid crystal is deposited with transparent electrodes and the other with a
Page- 7
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
reflective coating on their inside faces in a liquid crystal cell then it is known as __________.
Options :
1. Transmittive type cell
2. Reflective type cell
3. Conductive type cell
4. Deflective type cell
Question Number : 31 Question Id : 75322911064 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which stepper motor has the characteristics of excellent angular resolution and low torque?
Options :
1. Permanent magnet (PM) stepper motor
2. Separately exited (SE) Stepper motor
3. Variable reluctance (VR) stepper motor
4. Hybrid (HY) stepper motor
Question Number : 32 Question Id : 75322911065 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is a conventional source of energy?
Options :
1. Biogas
2. Natural gas
3. Ocean Tidal Energy
4. Wind
Question Number : 33 Question Id : 75322911066 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is a peak load power plant?
Options :
1. Geothermal plant
2. Biogas plant
3. Biomass plant
4. Gas plant
Question Number : 34 Question Id : 75322911067 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following CANNOT be used as a fuel in nuclear power plants?
Options :
1. U-235
2. U-238
3. Pl-236
4. Th-232
Question Number : 35 Question Id : 75322911068 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
What are the two types of turbines mainly used as water turbines in hydroelectric power plants?
Page- 8
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Options :
1. Axial turbine and Tyson turbine
2. Cross flow turbine and Radial turbine
3. Impulse turbine and Reaction turbine
4. Turboshaft turbine and Mixed flow turbine
Question Number : 36 Question Id : 75322911069 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
The turn OFF process of an SCR is known as ______.
Options :
1. commutation
2. conversion
3. inversion
4. stagnation
Question Number : 37 Question Id : 75322911070 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
How many thyristors are there in a three-phase full wave controller?
Options :
1. 3
2. 6
3. 12
4. 24
Question Number : 38 Question Id : 75322911071 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which logic instruction is used by the 8085 microprocessor to return to the calling program?
Options :
1. RET
2. RLC
3. RRC
4. RISC
Question Number : 39 Question Id : 75322911072 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following signals in 8085 microprocessors describes that it is a non-maskable interrupt and has the highest priority?
Options :
1. INT
2. INTR
3. RST
4. TRAP
Question Number : 40 Question Id : 75322911073 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
The air blast circuit breaker can be employed in high voltage circuits in the outdoors switch yard for _______ lines.
Options :
Page- 9
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
1. 15 kV
2. 33 k
3. 66 kV
4. 220 kV
Question Number : 41 Question Id : 75322911074 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which type of grounding system has the neutral point of a 3-phase system directly connected to earth through a wire of negligible
resistance and reactance?
Options :
1. Resonant grounding
2. Reactance grounding
3. Resistance grounding
4. Solid grounding
Question Number : 42 Question Id : 75322911075 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following is the appropriate use of a repulsion motor as a drive?
Options :
1. Coil winding machines
2. Refrigerators and small portable hoists
3. Teleprinters
4. Vacuum cleaners
Question Number : 43 Question Id : 75322911076 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
It is required to provide an illumination of 100 lux in a factory hall of 30 m length and 15 m breadth. Assume the depreciation factor is
0.8, coefficient of utilisation is 0.4 and efficiency of lamp is 14 lumen/watt. Suggest the number of lamps required when rating of the
lamp is 250 W.
Options :
1. 20
2. 40
3. 80
4. 100
Question Number : 44 Question Id : 75322911077 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Where should the ELCB be located to protect the whole installation?
Options :
1. Near the main board
2. Near the earthing point
3. Near the heavy consumer device
4. Outside the entry gate
Question Number : 45 Question Id : 75322911078 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
What should be the cross section of the earth continuity conductor?
Page- 10
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Options :
1. Should not be either less than 1.9 mm2 or half of the installation conductor size.
2. Should not be either less than 2.9 mm2 or half of the installation conductor size.
3. Should not be either less than 1.9 mm2 or same of the installation conductor size.
4. Should not be either less than 2.9 mm2 or same of the installation conductor size.
Question Number : 46 Question Id : 75322911079 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
At what interval is the ground connection of the medium installation transformer checked and the earth resistance recorded?
Options :
1. 1 month
2. 3 months
3. 6 months
4. 1 year
Question Number : 47 Question Id : 75322911080 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
What should be the insulation resistance of the LV side of the 1600 kVA, 20 kV/400 V three-phase transformer at 30° C?
Options :
1. 15 MΩ
2. 29.7 MΩ
3. 189.39 MΩ
4. 375 MΩ
Question Number : 48 Question Id : 75322911081 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
At what interval should the dew point of SF6 be checked for the SF6 circuit breaker?
Options :
1. 6 months
2. 1 year
3. 2 years
4. 3 years
Question Number : 49 Question Id : 75322911082 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
What is the unit of measurement used to measure the air gap between the rotor and stator of the starter motor?
Question Number : 50 Question Id : 75322911083 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Page- 11
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 51 Question Id : 75322911084 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
What is the other term used for the head of the production department of an organisation?
Options :
1. Quality manager
2. Research manager
3. Works manager
4. Engineering manager
Question Number : 52 Question Id : 75322911085 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
How is the community benefitted from all the business operating in their area?
Options :
1. By getting satisfactory service and timely delivery of goods.
2. By getting higher return on investment.
3. By having economic and social stability.
4. By having enduring partnership for raw materials, components and service.
Question Number : 53 Question Id : 75322911086 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
According to which theory, any given activity delineated in a network is unlikely to be completed on time?
Options :
1. Bar chart
2. Gnat chart
3. CPM
4. PERT
Question Number : 54 Question Id : 75322911087 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
Page- 12
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
3.
4.
Question Number : 55 Question Id : 75322911088 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 56 Question Id : 75322911089 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 57 Question Id : 75322911090 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
Page- 13
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
3.
4.
Question Number : 58 Question Id : 75322911091 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 59 Question Id : 75322911092 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Page- 14
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 60 Question Id : 75322911093 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
General Aptitude
Section Id : 753229525
Section Number : 2
Section type : Online
Mandatory or Optional : Mandatory
Number of Questions : 20
Number of Questions to be attempted : 20
Section Marks : 20
Enable Mark as Answered Mark for Review and Clear Response : Yes
Maximum Instruction Time : 0
Sub-Section Number : 1
Sub-Section Id : 753229783
Question Shuffling Allowed : Yes
Question Number : 61 Question Id : 75322911094 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
_____, a sepoy in the 34th Regiment of the Bengal Native Infantry (BNI) was a key figure behind the Sepoy Mutiny of 1857.
Options :
1. Khudiram Bose
2. Chandrashekhar Azad
3. Batukeshwar Dutt
4. Mangal Pandey
Question Number : 62 Question Id : 75322911095 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Which of the following was a weekly newspaper founded by Bipin Chandra Pal, and later edited by Aurobindo Ghose?
Options :
1. Swaraj
2. Samvad (Sambad) Kaumudi
3. Bande (Vande) Mataram
4. Rast Goftar
Question Number : 63 Question Id : 75322911096 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Page- 15
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
The Indian Museum was established in ________ in the year 1814.
Options :
1. Mumbai
2. Kolkata
3. Lucknow
4. Hyderabad
Question Number : 64 Question Id : 75322911097 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
_______ is a form of war dance from West Bengal.
Options :
1. Lavni/Lavani
2. Raibenshe/ Raibense
3. Kamsale
4. Ummatt-aat
Question Number : 65 Question Id : 75322911098 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Holi is also known by the name of _______ in West Bengal.
Options :
1. Jagaddhatri Puja
2. Kojagiri Poornima
3. Dol Purnima
4. Jiviti Puja
Question Number : 66 Question Id : 75322911099 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
As per the State Budget presented on 7 July 2021, West Bengal has allocated ________ of its total expenditure on health in 2021-22.
Options :
1. 6.7%
2. 7.6%
3. 9.8%
4. 8.9%
Question Number : 67 Question Id : 75322911100 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
As of January 2022, a beneficiary can avail a loan of up to Rs. ________ under the ‘Karma Sathi Prakalpa’ Scheme introduced by the
Government of West Bengal in 2020.
Options :
1. 2 lakhs
2. 3 lakhs
3. 5 lakhs
4. 7 lakhs
Question Number : 68 Question Id : 75322911101 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Page- 16
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 69 Question Id : 75322911102 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
WBIIDC is an acronym for ________.
Options :
1. West Bengal Industry & Infrastructure Development Council
2. West Bengal Industry & Infrastructure Development Corporation
3. West Bengal Internal Infrastructure Development Council
4. West Bengal Industrial Infrastructure Development Corporation
Question Number : 70 Question Id : 75322911103 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Who was the Minister of State of North Bengal Development department as of 31st January 2022?
Options :
1. Yeasmin Sabina
2. Pulak Roy
3. Ujjal Biswas
4. Sashi Panja
Sub-Section Number : 2
Sub-Section Id : 753229784
Question Shuffling Allowed : Yes
Question Number : 71 Question Id : 75322911104 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 72 Question Id : 75322911105 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Page- 17
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Options :
1.
2.
3.
4.
Question Number : 73 Question Id : 75322911106 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 74 Question Id : 75322911107 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 75 Question Id : 75322911108 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Page- 18
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Options :
1.
2.
3.
4.
Question Number : 76 Question Id : 75322911109 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 77 Question Id : 75322911110 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 78 Question Id : 75322911111 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Page- 19
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Options :
1.
2.
3.
4.
Question Number : 79 Question Id : 75322911112 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Page- 20
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 80 Question Id : 75322911113 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
English Test
Section Id : 753229526
Section Number : 3
Section type : Online
Mandatory or Optional : Mandatory
Number of Questions : 15
Number of Questions to be attempted : 15
Section Marks : 15
Enable Mark as Answered Mark for Review and Clear Response : Yes
Maximum Instruction Time : 0
Sub-Section Number : 1
Sub-Section Id : 753229785
Question Shuffling Allowed : Yes
Question Number : 81 Question Id : 75322911114 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate option to fill in the blank.
Question Number : 82 Question Id : 75322911115 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate option to fill in the blank.
I had informed my mother that I would be late, _______she was upset with me.
Options :
1. still
2. because
Page- 21
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
3. since
4. whereas
Question Number : 83 Question Id : 75322911116 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate option to fill in the blank.
Question Number : 84 Question Id : 75322911117 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate option to fill in the blank.
Question Number : 85 Question Id : 75322911118 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate article to fill in the blank.
Question Number : 86 Question Id : 75322911119 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate article to fill in the blank.
Question Number : 87 Question Id : 75322911120 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Page- 22
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 88 Question Id : 75322911121 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate ANTONYM of the given word.
Feeble
Options :
1. Heavy
2. Tight
3. Delicate
4. Strong
Question Number : 89 Question Id : 75322911122 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate synonym of the given word.
Paltry
Options :
1. Plenty
2. Pitiful
3. Precious
4. Pointed
Question Number : 90 Question Id : 75322911123 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate meaning of the given idiom.
Question Number : 91 Question Id : 75322911124 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the most appropriate meaning of the given idiom.
Lose temper
Options :
1. Become poor
Page- 23
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
2. Become sad
3. Become angry
4. Become lazy
Question Number : 92 Question Id : 75322911125 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Sentences of a paragraph are given below in jumbled order. Arrange the sentences in the correct order to form a meaningful and
coherent paragraph.
A. She is the only driver who navigates a BEST bus on Mumbai roads.
B. But it is not the wheel of a car.
C. Pratiksha has a firm grip on the wheel.
D. She started with bikes but always wanted to drive heavy vehicles.
Options :
1. CBAD
2. CADB
3. DACB
4. ABCD
Question Number : 93 Question Id : 75322911126 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Sentences of a paragraph are given below. While the first sentence (S1) is in the correct order, the sentences below it are jumbled up.
Arrange the sentences in the correct order to form a meaningful and coherent paragraph.
S1. Most of us have been born and brought up in a world with electricity.
A. However, our ancestors managed to live their lives without it.
B. Thus, it cannot be denied that electricity is the magic power that runs the modern world.
C. It is almost impossible for us to think of a room without a fan or an electric bulb.
D. So, today we cannot picture a world without electricity.
Options :
1. DBCA
2. DACB
3. CABD
4. ABCD
Question Number : 94 Question Id : 75322911127 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the option that can be used as a one-word substitute for the given group of words.
Question Number : 95 Question Id : 75322911128 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Select the option that can be used as a one-word substitute for the given group of words.
Page- 24
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Options :
1. Celebration
2. Choir
3. Concert
4. Chanting
Bengali Test
Section Id : 753229527
Section Number : 4
Section type : Online
Mandatory or Optional : Optional
Number of Questions : 5
Number of Questions to be attempted : 5
Section Marks : 5
Enable Mark as Answered Mark for Review and Clear Response : Yes
Maximum Instruction Time : 0
Sub-Section Number : 1
Sub-Section Id : 753229786
Question Shuffling Allowed : Yes
Question Number : 96 Question Id : 75322911129 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 97 Question Id : 75322911130 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Page- 25
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Question Number : 98 Question Id : 75322911131 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 99 Question Id : 75322911132 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 100 Question Id : 75322911133 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Page- 26
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
Nepali Test
Section Id : 753229528
Section Number : 5
Section type : Online
Mandatory or Optional : Optional
Number of Questions : 5
Number of Questions to be attempted : 5
Section Marks : 5
Enable Mark as Answered Mark for Review and Clear Response : Yes
Maximum Instruction Time : 0
Sub-Section Number : 1
Sub-Section Id : 753229787
Question Shuffling Allowed : Yes
Question Number : 101 Question Id : 75322911134 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 102 Question Id : 75322911135 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 103 Question Id : 75322911136 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
Page- 27
https://link.testbook.com/bQQ2EkH1bpb https://link.testbook.com/bQQ2EkH1bpb
1.
2.
3.
4.
Question Number : 104 Question Id : 75322911137 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Question Number : 105 Question Id : 75322911138 Question Type : MCQ Option Shuffling : Yes Is Question Mandatory : No
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0 Option Orientation : Vertical
Correct Marks : 1 Wrong Marks : 0
Options :
1.
2.
3.
4.
Page- 28