T400HW04-V1

Global LCD Panel Exchange Center www.panelook.
com
T400HW04 V1 Product Specification

Rev.0 2
Model Name: T400HW04 V1

Issue Date: 2011/01/03
() Preliminary Specifications
Ϡ) Final Specifications
(Ϡ
© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 1 / 33
ʳ One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Rev.0 2
Contents
1. General Description ............................................................................................................ 4
2. Absolute Maximum Ratings ................................................................................................ 5
3. Electrical Specification ........................................................................................................... 6
3.1 Electrical Characteristics .......................................................................................... 6
3.1.1: DC Characteristics ............................................................................................. 6
3.1.2: AC Characteristics ............................................................................................. 7
3.3 Signal Timing Specification ......................................................................................... 14
3.4 Signal Timing Waveforms....................................................................................... 15
3.5 Color Input Data Reference.................................................................................... 16
3.6 Power Sequence for LCD....................................................................................... 17
3.7 Backlight Specification ................................................................................................ 18
3.7.1 Light bar Driven Condition ................................................................................ 18
3.7.2 Input Pin Assignment ........................................................................................ 19
4. Optical Specification ............................................................................................................. 20
5. Mechanical Characteristics .................................................................................................. 23
6. Reliability Test Items............................................................................................................. 26
7. International Standard .......................................................................................................... 27
7.1 Safety.......................................................................................................................... 27
7.2 EMC ............................................................................................................................ 27
8. Packing ................................................................................................................................ 28
8-1 DEFINITION OF LABEL: ............................................................................................ 28
8-2 PACKING METHODS: ................................................................................................ 29
8-3 Pallet and Shipment Information ................................................................................. 29
8-3 Pallet and Shipment Information ................................................................................. 30
9. PRECAUTIONS ................................................................................................................... 31

Rev.0 2
Record of Revision
Version Date Page Description
0.0 2010/12/10 First release
6 Update DC Characteristics
11~12 Add pin assignment
0.1 2011/01/03
18 Update BLU power consumption
24~25 Update Front/Back Drawing
0.2 2011/0/21 18 Update the value of forward voltage

Rev.0 2
1. General Description
This specification applies to the 40.0 inch Color TFT-LCD Module T400HW04 V1. This LCD module has a TFT
active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 40.0 inch. This module supports
1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each
dot.
The T400HW04 V1 has been designed to apply the 10-bit 2 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very
important.
* General Information
Items Specification Unit Note

Active Screen Size 40.00 inch
Display Area 885.6(H) x 498.15(V) mm
Outline Dimension 921.7(H) x 537.8 (V) x 27.5(D) mm D: front bezel to T-con cover
Driver Element a-Si TFT active matrix
Bezel Opening 891.7 (H) x 504.8 (V) mm
Display Colors 10 bit, 1.07B Colors
Number of Pixels 1,920x1,080 Pixel
Pixel Pitch 0.46125 (H) x 0.46125(W) mm
Pixel Arrangement RGB vertical stripe
Display Operation Mode Normally Black
Surface Treatment Anti-Glare, 3H Haze=2%
Rotate Function Unachievable Note 1
Note 1: Rotate Function refers to LCD display could be able to rotate.

Rev.0 2
2. Absolute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Symbol Min Max Unit Conditions

Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1
Input Voltage of Signal Vin -0.3 4 [Volt] Note 1
o
Operating Temperature TOP 0 +50 [ C] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
o
Storage Temperature TST -20 +60 [ C] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
o
Panel Surface Temperature PST 65 [ C] Note 3
Note 1: Duration: 50 msec.
Note 2: Maximum Wet-Bulb should be 39 к and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40 к or less. At temperatures
greater than 40к, the wet bulb temperature must not exceed 39к.
Note 3: Surface temperature is measured at 50к Dry condition

Rev.0 2
3. Electrical Specification
The T400HW04 V1 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT
array and liquid crystal. The other is to power Back Light Unit.
3.1 Electrical Characteristics

3.1.1: DC Characteristics
Value
Parameter Symbol Unit Note
Min. Typ. Max
LCD
Power Supply Input Voltage VDD 10.8 12 13.2 VDC
Power Supply Input Current IDD -- 0.53 0.9 A 1
Power Consumption PC -- 6.36 10.8 Watt 1
Inrush Current IRUSH -- -- 4 A 2
Input Differential Voltage ЮV ЮID 150 200 -- mVDC 3
LVDS Differential Input High Threshold Voltage VTH +100 -- -- mVDC 3

Interface
Differential Input Low Threshold Voltage VTL -300 -- -100 mVDC 3
Input Common Mode Voltage VICM 1.1 1.25 1.4 VDC 3

VIH
CMOS Input High Threshold Voltage 2.7 -- 3.3 VDC 4
(High)
Interface VIL
Input Low Threshold Voltage 0 -- 0.6 VDC 4
(Low)
Backlight Power Consumption PBL 69.7 73.18 Watt
Life time (MTTF) 30000 Hour 8,9

Rev.0 2
3.1.2: AC Characteristics
Value
Min. Typ. Max
Input Channel Pair Skew Margin tSKEW (CP) -500 -- +500 ps 5
Receiver Clock : Spread Spectrum Fclk Fclk

Fclk_ssʳ --ʳ MHzʳ 6
Modulation range ʳ -3%ʳ +3%ʳ
LVDS
Receiver Clock : Spread Spectrum
Interface Fssʳ 30ʳ --ʳ 200ʳ KHzʳ 6
Modulation frequencyʳ
Receiver Data Input Margin
Fclk = 85 MHz tRMGʳ -0.4 --ʳ 0.4 nsʳ 7
Fclk = 65 MHzʳ -0.5ʳ --ʳ 0.5ʳ
Note:
1. VDD = 12.0V, Fv = 60Hz, Fclk= 74.23MHz , 25 к, Test Pattern : White Pattern
2. Measurement condition : Rising time = 400us

μs
3. VICM = 1.25V
LVDS -
V IC M V TH
|V ID |
V TL
LVDS +
GND
|V ID |
0V
|V ID |
4. The measure points of VIH and VIL are in LCM side after connecting the System Board and LCM.
5. Input Channel Pair Skew Margin

Rev.0 2
Note: x = 0, 1, 2, 3, 4
6. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures

7. Receiver Data Input Margin
Rating
Min Type Max
Input Clock Frequency Fclk Fclk (min) -- Fclk (max) MHz T=1/Fclk
Input Data Position0 tRIP1 -|tRMG| 0 |tRMG| ns
Input Data Position1 tRIP0 T/7-|tRMG| T/7 T/7+|tRMG| ns
Input Data Position2 tRIP6 2T/7-|tRMG| 2T/7 2T/7+|tRMG| ns
!
!
!
!
!
!
!
' (

)*$
' (
)*$+, "##$
"##$%$
%&

Rev.0 2
8. The relative humidity must not exceed 80% non-condensing at temperatures of 40 к or less. At
к
temperatures greater than 40 , the wet bulb temperature must not exceed 39 к. When operate at low
temperatures, the brightness of LED will drop and the life time of LED will be reduced.
9. The lifetime (MTTF) is defined as the time which luminance of LED is 50% compared to its original value.
[Operating condition: Continuous operating at Ta = 25±2 к]

Rev.0 2
3.2 Interface Connections
z LCD connector: FI-RE51S-HF (JAE, LVDS connector)
z Mating connector:
PIN Symbol Description PIN Symbol Description
1 VDD Power Supply, +12V DC Regulated 26 CH2_0+ LVDS Channel 2, Signal 0+
2 VDD Power Supply, +12V DC Regulated 27 CH2_1- LVDS Channel 2, Signal 1-
4 VDD Power Supply, +12V DC Regulated 29 CH2_2- LVDS Channel 2, Signal 2-
6 N.C. No connection 31 GND Ground
7 GND Ground 32 CH2_CLK- LVDS Channel 2, Clock -
8 GND Ground 33 CH2_CLK+ LVDS Channel 2, Clock +
9 GND Ground 34 GND Ground
10 CH1_0- LVDS Channel 1, Signal 0- 35 CH2_3- LVDS Channel 2, Signal 3-
11 CH1_0+ LVDS Channel 1, Signal 0+ 36 CH2_3+ LVDS Channel 2, Signal 3+
12 CH1_1- LVDS Channel 1, Signal 1- 37 CH2_4- LVDS Channel 2, Signal 4-
13 CH1_1+ LVDS Channel 1, Signal 1+ 38 CH2_4+ LVDS Channel 2, Signal 4+
14 CH1_2- LVDS Channel 1, Signal 2- 39 GND Ground
15 CH1_2+ LVDS Channel 1, Signal 2+ 40 SCL EEPROM Serial Clock
16 GND Ground 41 SDA EEPROM Serial Data
17 CH1_CLK- LVDS Channel 1, Clock - 42 N.C. No connection
18 CH1_CLK+ LVDS Channel 1, Clock + 43 BUS_SW BUS_SW (SONY internal use only)
reserve 0402 footprint of
19 GND Ground 44 Panel_SEL resistor to ground
(SONY internal use only)
20 CH1_3- LVDS Channel 1, Signal 3- 45 N.C. No connection
21 CH1_3+ LVDS Channel 1, Signal 3+ 46 SA_MODE SA_MODE (SONY internal use only)
22 CH1_4- LVDS Channel 1, Signal 4- 47 FLAGIN FLAGIN (SONY internal use only)
23 CH1_4+ LVDS Channel 1, Signal 4+ 48 N.C. No connection
24 GND Ground 49 N.C. No connection
25 CH2_0- LVDS Channel 2, Signal 0- 50 TCON_RDY TCON_RDY (SONY internal use only)
51 N.C. AUO Internal Use Only

Rev.0 2
z LCD connector: SM08B-GHS-TB (JST)
PIN Symbol Description

1 VDD Power Supply, +12V DC Regulated
2 VDD Power Supply, +12V DC Regulated
3 GND Ground
4 GND Ground
5 GLS_CTRL GLS_CTRL
6 GLS_CTRL2 GLS_CTRL2
7 EMI_FAIL EMI_FAIL
8 NC No connection
z LCD connector: 14FLT-SM2-TB (JST)
PIN Symbol Description

1 GPIO2 GPIO2
2 BINT BINT
3 SPI_WP SPI_WP
4 SPI_CS SPI_CS
5 SPI_OUTCTRL SPI_OUTCTRL
6 GND Ground
7 SPI_CLK SPI_CLK
8 GND Ground
9 SPI_DI SPI_DI
10 GND Ground
11 SPI_DO SPI_DO
12 GND Ground
13 GND Ground
14 GND Ground

Rev.0 2
z LCD connector: FH31H-56S-0.5SH(08) (HRS)
PIN Symbol Description PIN Symbol Description

1 GND Ground 26 3-PWM5 3-PWM5
2 1-PWM1 1-PWM1 27 3-PWM6 3-PWM6
3 1-PWM2 1-PWM2 28 3-PWM7 3-PWM7
4 1-PWM3 1-PWM3 29 3-PWM8 3-PWM8
5 1-PWM4 1-PWM4 30 GND Ground
7 1-PWM6 1-PWM6 32 4-PWM1 4-PWM1
8 1-PWM7 1-PWM7 33 4-PWM2 4-PWM2
9 1-PWM8 1-PWM8 34 4-PWM3 4-PWM3
10 GND Ground 35 4-PWM4 4-PWM4
11 VLED_MPU VLED_MPU 36 4-PWM5 4-PWM5
12 2-PWM1 2-PWM1 37 4-PWM6 4-PWM6
13 2-PWM2 2-PWM2 38 4-PWM7 4-PWM7
14 2-PWM3 2-PWM3 39 4-PWM8 4-PWM8
16 2-PWM5 2-PWM5 41 WP_I2C WP_I2C
17 2-PWM6 2-PWM6 42 GND_I2C GND_I2C
18 2-PWM7 2-PWM7 43 VCC_I2C +3.3V DC Regulated
19 2-PWM8 2-PWM8 44 SDA_I2C SDA_I2C
20 GND Ground 45 SCL_I2C SCL_I2C
21 ADJ_MODE ADJ_MODE 46 GND Ground
23 3-PWM2 3-PWM2 48 12V Power Supply, +12V DC Regulated
24 3-PWM3 3-PWM3 49 12V Power Supply, +12V DC Regulated
25 3-PWM4 3-PWM4 50 STDBY STDBY
51 POWER_ON POWER_ON
52 FAIL FAIL
53 REF REF
54 BL_TYPE1 BL_TYPE1
55 BL_TYPE2 BL_TYPE2
56 GND Ground

Rev.0 2
LVDS Option = JEIDA
! 45 6 , * $+ 7 5 $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$+ * 445 $+ 7 5 $$$$$$$$$$$$$$$$$$$$$$$$$$$ 5 $+ 7 5 $$$$

$$$$
+ ,
+ 23
1 0
+ 2(
+ 23
+ 2( - - 1 0 -
+ 23 -0 - / . . - -1 -0 - /
+ 2(
+ 23
. - - .
+ 2(
+ 2 3
+ 2 ( . - - .
Note: x = 1, 2, 3, 4…

Rev.0 2
3.3 Signal Timing Specification
This is the signal timing required at the input of the user connector. All of the interface signal timing should be
satisfied with the following specifications for its proper operation.
Timing Table (DE only Mode)

Signal Item Symbol Typ.1(typical) Typ.2 Typ.3 Unit
Period Tv 1134ʳ 1360ʳ 1416ʳ Th

Vertical Section Active Tdisp (v) 1080 Th
Blanking Tblk (v) 54ʳ 280ʳ 336ʳ Th
Period Th 1092ʳ 1092ʳ 1092ʳ Tclk
Horizontal Section Active Tdisp (h) 960 Tclk
Blanking Tblk (h) 132ʳ 132ʳ 132ʳ Tclk
Clock Frequency Fclk=1/Tclk 74.3ʳ 74.26ʳ 74.22ʳ MHz
Vertical Frequency Frequency Fv 60ʳ 50ʳ 48ʳ Hz

Horizontal Frequency Frequency Fh 68ʳ 68ʳ 68ʳ KHz
Notes:
(1) Display position is specific by the rise of DE signal only.
st st
Horizontal display position is specified by the rising edge of 1 DCLK after the rise of 1 DE, is displayed on the
left edge of the screen.
(2)Vertical display position is specified by the rise of DE after a “Low” level period equivalent to eight times of
st st
horizontal period. The 1 data corresponding to one horizontal line after the rise of 1 DE is displayed at the top
line of screen.
(3) If a period of DE “High” is less than 1366 DCLK or less than 768 lines, the rest of the screen displays black.
(4)The display position does not fit to the screen if a period of DE “High” and the effective data period do not
synchronize with each other.
Rev.0 2
Page 15 / 33
&6 ;$)5
&96 &")6
$' 5
&8
/
-$ '5 6"$ '5 '5 '5 '5 '5 6"$

www.panelook.com
© Copyright AUO Optronics Corp. 2009 All Rights Reserved.

+':
&8
&
&")8 &98
/
3.4 Signal Timing Waveforms
!5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$
+2
Global LCD Panel Exchange Center
6"$ 6"$
;(0 ;( ;( ;( 0 ;( ;( ;(
!5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$ !5$
+2 ;( ;( ;( ;
6"$
1 ;( ;( ;
6"$


Rev.0 2
3.5 Color Input Data Reference
The brightness of each primary color (red, green and blue) is based on the 10 bit gray scale data input for the color;
the higher the binary input, the brighter the color. The table below provides a reference for color versus data input.
COLOR DATA REFERENCE

Input Color Data
RED GREEN BLUE

Color
MSB LSB MSB LSB MSB LSB
R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0
Basic Blue(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1
Colorʳ Cyan 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
ʳ
Magenta 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1
ʳ
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
RED(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED(001) 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Rʳ ---- ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ
RED(1022) 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0
Gʳ ---- ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ
GREEN(1022) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0
GREEN(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0
BLUE(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
BLUE(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Bʳ ---- ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ ʳ
BLUE(1022) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0
BLUE(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1

Rev.0 2
3.6 Power Sequence for LCD
*1 *1
Standard Standalone
Parameter Unit
Min. Type. Max. Type.
t1 0.47 --- 30 --- ms
t2a 20 --- 100 --- ms
*4 *4
t2b 0 --- 100 --- ms
t3 60 --- --- --- ms
t4 20 --- --- --- ms
*4 *4
t5 680 --- 1160 --- ms
t4+t5 --- --- --- 51 ms
t6a --- --- --- --- ms
t6b 500 --- --- --- ms
*2
t7 100 --- --- --- ms
t8 --- --- --- --- ms
*3 *3
t9 0 --- 300 --- ms
t10 1000 --- --- --- ms
Note:
(1) Standard mode is used for customer’s operation. Standalone mode is used for panel factory operation.
(2) t7=0: concern for residual pattern before BLU turn off.
(3) t9: voltage of VDD must decay smoothly after power-off. (customer system decide this value)
(4) t2b, t5 and t9 : customer decides this value

Rev.0 2
3.7 Backlight Specification
The backlight unit contains 4pcs light bar.
3.7.1 Light bar Driven Condition
9DOXHV
9DOXHV
3DUDPHWHU
3DUDPHWHU 6\PERO
6\PERO 8QLW
8QLW 1RWH
1RWH
0LQ 7\S
0LQ 7\S 0D[
0D[
)RUZDUG&XUUHQW
)RUZDUG&XUUHQW $QRGH
$QRGH ,) DQRGH P$
RQHOLJKW
RQHOLJKWEDU &DWKRGH
&DWKRGH ,) FDWKRGH P$
3HDN)RUZDUG&XUUHQW
3HDN)RUZDUG&XUUHQW ,)3
,)3 P$ PVHF
)RUZDUG9ROWDJH
)RUZDUG9ROWDJH 9)
9) 9
7RWDO3RZHU&RQVXPSWLRQ OLJKW
OLJKWEDUV
EDUV 3%/
3%/ :

Rev.0 2
3.7.2 Input Pin Assignment
3
3SLQ
SLQ 3
3ದSLQ
SLQ
$QRGH &DWKRGH P$

$QRGH &DWKRGH P$
$QRGH 1&
$QRGH &DWKRGH P$
&DWKRGH P$
+ +
- -
LS LS
Panel
(Front view)
LS LS
+ +
- -
1 +OUT
2 +OUT
3 +OUT
4 +OUT
1 -OUT
2 -OUT
3 N
4 -OUT
5 -OUT

Rev.0 2
4. Optical Specification
Optical characteristics are determined after the unit has been ‘ON’ and stable for approximately 45 minutes in a
dark environment at 25°C. The values specified are at an approximate distance 50cm from the LCD surface at a
viewing angle of ĳ and ș equal to 0°.
Fig.1 presents additional information concerning the measurement equipment and method.
SR3 or equivalent
Values
Parameter Symbol Unit Notes
Min. Typ. Max
Contrast Ratio CR 4000 5000 -- 1
2
Surface Luminance (White) LWH 360 450 -- cd/m 2
Luminance Variation įWHITE(9P) -- -- 1.33 3
Response Time (G to G) TȖ -- 5.5 -- Ms 4
Color Gamut NTSC 72 %
Color Coordinates
Red RX 0.630
RY 0.330
Green GX 0.320
GY 0.620
Typ.-0.03 Typ.+0.03
Blue BX 0.150
BY 0.040
White WX 0.280
WY 0.290
Viewing Angle 5
x axis, right(ĳ=0°) șr -- 89 -- degree
x axis, left(ĳ=180°) șl -- 89 -- degree
y axis, up(ĳ=90°) șu -- 89 -- degree
y axis, down (ĳ=270°) șd -- 89 -- degree
Note:

Rev.0 2
1. Contrast Ratio (CR) is defined mathematically as:
Surface Luminance of Lon5
Contrast Ratio=
Surface Luminance of Loff5
2. Surface luminance is luminance value at point 5 across the LCD surface 50cm from the surface with all pixels
displaying white. From more information see FIG 2. LED current IF = typical value, LWH=Lon5 where Lon5 is the
luminance with all pixels displaying white at center 5 location.
3. The variation in surface luminance, įWHITE is defined (center of Screen) as:
įWHITE(9P)= Maximum(Lon1, Lon2,…,Lon9)/ Minimum(Lon1, Lon2,…Lon9)
4. Response time ӫʳ is the average time required for display transition by switching the input signal for five
luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on Fv=60Hz to optimize.
Measured Target
Response Time 0% 25% 50% 75% 100%
0% 0% to 25% 0% to 50% 0% to 75% 0% to 100%
25% 25% to 0% 25% to 50% 25% to 75% 25% to 100%
Start 50% 50% to 0% 50% to 25% 50% to 75% 50% to 100%
75% 75% to 0% 75% to 25% 75% to 50% 75% to 100%
100% 100% to 0% 100% to 25% 100% to 50% 100% to 75%
ӫ
is determined by 10% to 90% brightness difference of rising or falling period. (As illustrated)
The response time is defined as the following figure and shall be measured by switching the input signal for
“any level of grey(bright) “ and “any level of gray(dark)”.
Any level of gray (Bright) Any level of gray (Dark) Any level of gray (Bright)
0%, 25%, 50%, 75%, 100% 0%, 25%, 50%, 75%, 100%
100%
90%
Photodetector
Output
10% 0%, 25%, 50%, 75%, 100%

Time
T ӫ (F) T ӫ (R)

Rev.0 2
FIG. 2 Luminance
H/2 1 2 3
4 5 6 H
7 8
H/6
V/6 V/2
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the
horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For
more information see FIG3.
FIG.3 Viewing Angle

Rev.0 2
5. Mechanical Characteristics
The contents provide general mechanical characteristics for the model T400HW04 V1. In addition the figures in the
next page are detailed mechanical drawing of the LCD.
Item Dimension Unit Note
Horizontal 921.7 mm
Vertical 537.8 mm
Outline Dimension
Depth (Dmin) 10.8 mm to rear
to control board
Depth (Dmax) 27.5 mm
cover
Weight 7200 g

Rev.0 2
Front View

Rev.0 2
Back View
“Details of dimension depend on MIF (Mechanical Interface).”

Rev.0 2
6. Reliability Test Items
Test Item Q’ty Condition
1 High temperature storage test 3 к
60 , 300hrs
2 Low temperature storage test 3 -20к, 300hrs
3 High temperature operation test 3 50к, 300hrs
4 Low temperature operation test 3 -5к, 300hrs

Wave form: random
Vibration level : 1.0G RMS
5 Vibration test (non-operation) 3 Bandwidth : 10-300Hz
Duration : X,Y,Z 10min per axes
X,Y,Z: Horizontal, face up
Shock level
50G,11ms in ±X,Y,Z axis
6 Shock test (non-operation) 3
Waveform: half sine wave
Direction: One time each direction
Random wave (1.05Grms 10~200Hz)
7 Vibration test (With carton) 3 Duration : X,Y,Z 10min per axes
Height: 254mm (ASTMD4169-I)

1(refer ASTM D 5276)
8 Drop test (With carton) 3
Front flatÆ rear flatÆ left flatÆ right flat Æ bottom flatÆ
nd
bottom flat (2 time)

Rev.0 2
7. International Standard
7.1 Safety
(1) UL 60950-1, UL 60065; Standard for Safety of Information Technology Equipment Including
electrical Business Equipment.
(2) IEC 60950-1 : 2001, IEC 60065:2001 ; Standard for Safety of International Electrotechnical
Commission
(3) EN 60950 : 2001+A11, EN 60065:2002+A1:2006; European Committee for Electrotechnical
Standardization (CENELEC), EUROPEAN STANDARD for Safety of Information Technology
Equipment Including Electrical Business Equipment.
7.2 EMC
(1) ANSI C63.4 “Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and
Electrical Equipment in the Range of 9kHz to 40GHz. “American National standards Institute(ANSI),
1992
(2) C.I.S.P.R “Limits and Methods of Measurement of Radio Interface Characteristics of Information
Technology Equipment.” International Special committee on Radio Interference.
(3) EN 55022 “Limits and Methods of Measurement of Radio Interface Characteristics of Information
Technology Equipment.” European Committee for Electrotechnical Standardization. (CENELEC),
1998

Rev.0 2
8. Packing
8-1 DEFINITION OF LABEL:
A. Panel Label:
*xxxxxxxxxxxx-xxxx*
AUO Internal Use

Panel Unique ID
AU Optronics
XXXXX Model NO: T400HW04 V.1 XXXXXXX

Manufactured XX/XX MADE IN XXXXX
AUO Internal Use Week Factory Location

Year AUO Internal Use
Green mark description
(1) For Pb Free Product, AUO will add for identification.
(2) For RoHs compatible products, AUO will add RoHS for identification.
Note: The green Mark will be present only when the green documents have been ready by AUO internal green
team. (definition of green design follows the AUO green design checklist.)
B. Carton Label:
QTY : 6


Rev.0 2
8-2 PACKING METHODS:
6pcs / 1carton

Rev.0 2
8-3 Pallet and Shipment Information
Specification
Item Packing Remark
Qty. Dimension Weight (kg)
Box = 3.2 kg
1 Packing BOX 6pcs/box 1020(L)*375(W)*615(H) 55
Cushion = 0.9kg
2 Pallet 1 1150(L)*1070(W)*135(H) 16
3 Boxes per Pallet 3 boxes/pallet
4 Panels per Pallet 18pcs/pallet
Pallet after packing 18 1150(L)*1070(W)*750(H) 181
Corner angle Moisture-proof film
Stretch film
Label PET band
Corner angle
Pallet

Rev.0 2
9. PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD module.
9-1 MOUNTING PRECAUTIONS

(1) You must mount a module using holes arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. twisted stress) is not applied
to module. And the case on which a module is mounted should have sufficient strength so that
external force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.
Transparent protective plate should have sufficient strength in order to the resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former
generates corrosive gas of attacking the polarizer at high temperature and the latter cause circuit
broken by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizer with glass, tweezers or anything harder than HB
pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the
surface of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials
like chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the
adhesives used to attach front/ rear polarizer. Do not use acetone, toluene and alcohol because
they cause chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes
deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.
9-2 OPERATING PRECAUTIONS

(1) The device listed in the product specification sheets was designed and manufactured for TV
application
(2) The spike noise causes the mis-operation of circuits. It should be lower than following voltage:
V=±200mV(Over and under shoot voltage)
(3) Response time depends on the temperature. (In lower temperature, it becomes longer..)
(4) Brightness of CCFL depends on the temperature. (In lower temperature, it becomes lower.) And in
lower temperature, response time (required time that brightness is stable after turned on) becomes
longer.
(5) Be careful for condensation at sudden temperature change. Condensation makes damage to
polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.
(6) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(7) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall

Rev.0 2
be done by system manufacturers. Grounding and shielding methods may be important to minimize
the interface.
9-3 ELECTROSTATIC DISCHARGE CONTROL
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain
that treatment persons are connected to ground through wristband etc. And don’t touch interface pin
directly.
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

Strong light exposure causes degradation of polarizer and color filter.
9-5 STORAGE
When storing modules as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
temperature between 5 к and 35к at normal humidity.
(2) The polarizer surface should not come in contact with any other object. It is recommended that they
be stored in the container in which they were shipped.
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM

(1) The protection film is attached to the bezel with a small masking tape. When the protection film is
peeled off, static electricity is generated between the film and polarizer. This should be peeled off
slowly and carefully by people who are electrically grounded and with well ion-blown equipment or
in such a condition, etc.
(2) When the module with protection film attached is stored for a long time, sometimes there remains a
very small amount of glue still on the bezel after the protection film is peeled off.
(3) You can remove the glue easily. When the glue remains on the bezel or its vestige is recognized,
please wipe them off with absorbent cotton waste or other soft material like chamois soaked with
normal-hexane.

Rev.0 2
Appendix
T400HW04 V1
300

T400HW04-V1

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

T400HW04-V1

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

T400HW04-V1

Uploaded by

Copyright:

Available Formats

Global LCD Panel Exchange Center www.panelook.

T400HW04 V1 Product Specification

Model Name: T400HW04 V1

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 1 / 33

T400HW04 V1 Product Specification

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 2 / 33

T400HW04 V1 Product Specification

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 3 / 33

T400HW04 V1 Product Specification

Items Specification Unit Note

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 4 / 33

T400HW04 V1 Product Specification

Item Symbol Min Max Unit Conditions

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 5 / 33

T400HW04 V1 Product Specification

3.1 Electrical Characteristics

Input Differential Voltage ЮV ЮID 150 200 -- mVDC 3

LVDS Differential Input High Threshold Voltage VTH +100 -- -- mVDC 3

Input Common Mode Voltage VICM 1.1 1.25 1.4 VDC 3

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 6 / 33

T400HW04 V1 Product Specification

Input Channel Pair Skew Margin tSKEW (CP) -500 -- +500 ps 5

Receiver Clock : Spread Spectrum Fclk Fclk

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 7 / 33

T400HW04 V1 Product Specification

7. Receiver Data Input Margin

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 8 / 33

T400HW04 V1 Product Specification

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 9 / 33

T400HW04 V1 Product Specification

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 10 / 33

T400HW04 V1 Product Specification

PIN Symbol Description

z LCD connector: 14FLT-SM2-TB (JST)

PIN Symbol Description

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 11 / 33

T400HW04 V1 Product Specification

PIN Symbol Description PIN Symbol Description

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 12 / 33

T400HW04 V1 Product Specification

LVDS Option = JEIDA

! 45 6 , *  $+ 7  5 $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$+ * 445  $+ 7  5 $$$$$$$$$$$$$$$$$$$$$$$$$$$ 5  $+ 7  5 $$$$

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 13 / 33

T400HW04 V1 Product Specification

Timing Table (DE only Mode)

Period Tv 1134ʳ 1360ʳ 1416ʳ Th

Vertical Frequency Frequency Fv 60ʳ 50ʳ 48ʳ Hz

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 14 / 33

© Copyright AUO Optronics Corp. 2009 All Rights Reserved.

T400HW04 V1 Product Specification

COLOR DATA REFERENCE

RED GREEN BLUE

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 16 / 33

T400HW04 V1 Product Specification

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 17 / 33

T400HW04 V1 Product Specification

3.7.1 Light bar Driven Condition

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 18 / 33

T400HW04 V1 Product Specification

! 45 6 , * $+ 7 5 $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$+ * 445 $+ 7 5 $$$$$$$$$$$$$$$$$$$$$$$$$$$ 5 $+ 7 5 $$$$

$QRGH &DWKRGH P$