Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
0 views

Control System - Assignment

The document is an assignment focused on control systems, covering definitions, system types, feedback effects, transfer functions, and block diagrams. It includes practical problems related to system responses, controller types, and stability analysis. Additionally, it discusses transient and steady-state responses, time domain specifications, and provides exercises for calculating various system parameters.

Uploaded by

23uelec006
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0 views

Control System - Assignment

The document is an assignment focused on control systems, covering definitions, system types, feedback effects, transfer functions, and block diagrams. It includes practical problems related to system responses, controller types, and stability analysis. Additionally, it discusses transient and steady-state responses, time domain specifications, and provides exercises for calculating various system parameters.

Uploaded by

23uelec006
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Control System: Assignment

1. Define the following terms


a. System
b. Control system
c. Input
d. Output
e. Disturbance
2. Explain the differences between closed loop and open loop systems with examples.
3. Define effect of feedback on sensitivity, stability and gain.
4. Define and explain about the transfer function in control system.
5. For physical system shown draw its equivalent system and write equilibrium equations.
Hence draw its electrical analogous circuits based on
i. Force – Voltage method
ii. Force – Current method

6. Find out the T.F of the given network.

7. What is block diagram? What are the basic components of block diagram?
8. Determine the overall transfer function for the block diagram shown in the figure.
9. Determine the overall transfer function for the block diagram shown in the figure.

10. Find the overall T.F by using Mason’s gain formula for the signal flow graph given below
Figs.
11. List out the time domain specifications and derive the expressions for Rise time, Peak time and
Peak overshoot.
12. What are transient and steady state response of a control system?
13. Name the test signals used in control system, Explain them briefly.
𝐶(𝑠) 25
14. A second order system is given by = 2 find its rise time, peak time, peak
𝑅(𝑠) 𝑠 +6𝑠+25
overshoot and settling time if subjected to unit step input. Also calculate the expression for its
output response.

15. For a control system shown below, determine the values of 𝐾 and 𝑘, so that maximum
overshoot for unit step input is 𝑀𝑝 = 25% and peak time is 𝑇𝑝 = 4 seconds.

16. A system has 30% overshoot and settling time of 5 seconds for a unit step input. Determine:
a. The transfer function
b. Peak time (𝑇𝑝 )
c. Output response (Assume 𝑒𝑠𝑠 as 2%)

17. Explain effects of proportional derivative and proportional integral controllers in system
performance.
18. Compare P, PI and PID controllers.
19. Explain BIBO stability? What is the necessary condition for stability?
20. Write the various construction rules to develop the root locus.

You might also like