Panasonic DVD f87

ORDER NO.
MD0403064C3
DVD/CD Player
DVD-F87GCS DVD-F87GN
Colour (S)... Silver Type
Specification
Signal system: PAL 625/50, PAL 525/60, NTSC C output level: NTSC; 0.286 Vp-p (75) PAL; 0.3000 Vp-p (75) Output connector: Component video output: (NTSC: 480P/480I, PAL: 576I) Y output level: PB output level: PR output level: Output connector: 1 Vp-p (75) 0.7 Vp-p (75) 0.7 Vp-p (75) Pin jack (Y:green, PB:blue, PR:red) Number of connectors: Audio output: Output level: Output connector: Number of connector: Audio performance: (1) Frequency response: lDVD (linear audio): 4 Hz-22 kHz (48 kHz sampling) 4 Hz-44 kHz (96 kHz sampling) lDVD audio: lCD audio: (2) S/N ratio: lCD audio: (3) 1 Vp-p (75) Pin jack (1 system) (4) 1 Vp-p (75) Dynamic range: lDVD (linear audio): 100 dB lCD audio: 98 dB 115 dB 4 Hz-88 kHz (192 kHz sampling) 4 Hz-20 kHz 2 Vrms (1kHz, 0dB) Pin jack 5.1-channel discrete output (5.1 channel): 1 system 1 system S terminal (1 system) Operating tempurature range: +5 to +35C (+41 to +95F) Operating humidity range: Disc played [8 cm or 12 cm]: (1) (2) (3) (4) (5) (6) (7) (8) DVD-RAM, (DVD-VR compatible, JPEG formatted discs) DVD-Audio DVD-Video DVD-R (DVD-Video compatible) CD-Audio (CD-DA) Video CD SVCD (Confirming to IEC62107) CD-R/CD-RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG formatted discs) (9) MP3/WMA*1 - Compatible compression rate: MP3: between 32 kbps and 320 kbps WMA: between 48 kbps and 320 kbps (10) JPEG*1 - Exif Ver 2.1 JPEG Baseline files - Picture resolution: between 320 x 240 x and 6144 x 4096 pixels (Sub sampling is 4:2:2 or 4:2:0 (11) HighMAT Level 2 (Audio and Image) Video output: Output level: Output terminal: S-video output: Y output level: 5 to 90% RH (no condensation)
Total harmonic distortion: lCD audio: 0.0025%
2004 Panasonic AVC Networks Singapore Pte. Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
DVD-F87GCS / DVD-F87GN
Digital audio output: Coaxial digital output: Pickup: Wavelength: Laser power: Power supply (For F87GN): Power supply (For F87GCS): 662 nm/ 785 nm CLASS 2/CLASS 3A AC 220 - 240 V, 50 Hz AC 220 - 240 V, 50/60 Hz Pin Jack
Power consumption: Dimensions: Mass:
10 W 430 (W) x 412.9 (D) x 68 (H) mm Approx. 4.0kg
Power consumption in standby mode: approx. 0.7 W Note: 1. Specifications are subject to change without notice. Mass and dimensions are approximate.
CONTENTS
Page
1 Before Use (For GCS Only) 2 Safety Precautions 2.1. General Guidelines 3 Before Repair and Adjustment 4 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices 5 Handling the Lead-free Solder 5.1. About lead free solder (PbF) 6 Cautions to be taken when handling Optical Pickup 6.1. Handling Optical Pickup 5 5 5 6 6 16.1. Disassembly flow chart 16.2. Printed Circuit Boards (P.C.B.) Position 16.3. Disassembling of Top Cabinet 16.4. Disassembling of DVD Lid 16.5. Disassembling of Front Panel 16.6. Disassembling of Rear Panel 16.7. Disassembling of Tray Assembly 16.8. Disassembly of Main P.C.B. 4 4 4 4 14.9. Things to Do After Repair 15 Service precautions 15.1. Recovery after the player is repaired 15.2. DVD Player Firmware Version Upgrade Process 15.3. Firmware Version Upgrade Process by Using Recovery Disc 28
Page
27 28 28 28
16 Disassembly and Main Component Replacement Procedures 30 30 31 32 32 32 33 33 33
6.2. Cautions to be taken during replacement of Optical Pickup 6 6.3. Grounding for Preventing Electrostatic Discharge 7 Precaution of Laser Diode 8 Accessories 9 Operation Procedure 10 Disc information 11 About HighMAT 11.1. What is HighMAT? 11.2. Why use HighMAT? 11.3. The advantages of using HighMAT 11.4. Outline of the HighMAT standard 12 Procedure for repairing the set 12.1. Distinguish the trouble cause 12.2. Diagnosis of Optical Pick-up Unit 6 7 8 9 10 13 13 13 13 14 16 17 19
16.9. Disassembly of Tray Base Guide (L) and Tray Base Guide (R) 16.10. Disassembly of Tray Base 16.11. Disassembly of Open Lock Gear 34 34 34
16.12. Disassembly of the Close Lock Gear & Close Lock Gear Spring 35
16.13. Disassembly of the Tray Motor P.C.B. and Sensor P.C.B. 35 16.14. Disassembly of the CD Traverse Unit 16.15. Disassembly of the Pulley Gear 16.16. Disassembly of Loading Motor P.C.B. 16.17. Disassembly of Drive Gear (A) & (B) 35 36 36 36
13 Optical Pickup Self-Diagnosis and Replacement Procedure 21 13.1. Self-diagnosis 13.2. Cautions to Be Taken During Replacement of Optical Pickup and Spindle Motor 14 Self-Diagnosis Function 14.1. Automatic Displayed Error Codes 14.2. Memorized Error Codes 14.3. Service Mode Table 1 14.4. DVD/CD Self-Diagnosis Error Code Description 14.5. Error Codes Stored During No Play 14.6. Service Mode Table 2 14.7. Service Mode Table 3 14.8. Lock Function 22 23 23 23 23 24 24 25 26 27 21
16.18. Disassembly of Magnet Holder washer, Magnet and Clamper 16.19. Disassembly of Cam Gear & Support Piece 37 37
16.20. Disassembly of Slide Plate (L) & (R) and Change Lever 37 16.21. Assembly of Tray Base 17 Service Position 17.1. Checking Procedure 38 39 39
17.2. Checking the Main P.C.B. , Panel P.C.B, Selection Panel P.C.B. and Display Panel P.C.B. 18 Adjustment Procedures 39 40
18.1. Service Tools and Equipment 19 Illustration of IC , Transistors and Diodes 20 Block Diagram 21 Schematic Diagram 21.1. (A) Optical Pickup Unit Circuit 21.2. (A) DVD Module (In/Out) Circuit 21.3. (A) DVD Module (DV2) Circuit 21.4. (B) Main (Operation Control) Circuit 21.5. (B) Main (Audio- out 1) Circuit 21.6. (B) Main (Audio- out 2) Circuit 21.7. (B) Main (Video Out) Circuit 21.8. (B) Main (Power) Circuit
40 42 43 49 50 51 54 58 60 62 63 64
21.10. (F) Sensor Circuit, (G) Tray Motor Circuit & (H) Loading Motor Circuit 22 Printed Circuit Board 22.1. (A) DVD Module P.C.B. (Side: A & B) 22.2. (B) Main P.C.B. 68 69 69 71
22.3. (C) Panel P.C.B., (D) Display Panel P.C.B. & (E) Selection Panel P.C.B. 22.4. (F) Sensor P.C.B., (G) Tray Motor P.C.B. & (H) Loading Motor P.C.B. 23 Wiring Connection Diagram 24 Parts Location and Replacement Parts List 24.1. Loading Mechanism, Traverse Unit and Cabinet 24.2. Component Parts List 24.3. Packing Materials & Accessories Parts List 24.4. Packaging 75 76 78 79 82 87 88 73
21.9. (C) Panel Circuit, (D) Display Panel Circuit & (E) Selection Panel Circuit 66
1 Before Use (For GCS Only)

Be sure to disconnect the mains cord before adjusting the voltage selector. Use a minus(-) screwdriver to set the voltage selector (on the rear panel) to the voltage setting for the area in which the unit will be used. (If the power supply in your area is 117V or 120V, set to the 127V position.) Note that this unit will be seriously damaged if this setting is not made correctly. (There is no voltage selector for some countries, the correct voltage is already set.)
2 Safety Precautions
2.1. General Guidelines
1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed. 3. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.
2.1.1.
Leakage Current Cold Check
1. Unplug the AC cord and connect a jumper between the two prongs on the plug. 2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading should be between 1M and 5.2M. When the exposed metal does not have a return path to the chassis, the reading must be .
Figure 1
2.1.2.
Leakage Current Hot Check (See Figure 1)
1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 2. Connect a 1.5k, 10 watts resistor, in parallel with a 0.15F capacitor, between each exposed metallic part on the set and a good earth ground such as a water pipe, as shown in Figure 1. 3. Use an AC voltmeter, with 1000 phms/volt or more sensitivity, to measure the potential across the resistor. 4. Check each exposed metallic part, and measure the voltage at each point. 5. Reverse the AC plug in the AC outlet and repeat each of the above measurements. 6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is out of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.
3 Before Repair and Adjustment

Disconnect AC power, discharge Power Supply Capacitors C1011 , C1041 & C1083 through a 10 , 5W resistor to ground. DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent. Current consumption at AC 120V, 60Hz in NO SIGNAL mode should be ~215 mA .
4 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices

Some semiconductor (solid state) devices can be damaged easily by electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equiped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equiped with ES devices, place the assembly on a conductive surface such as aluminium foil, to prevent electrostatic charge build up or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder remover device. Some solder removal devices not classified as anti-static (ESD protected) can generate electrical charge to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminium foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Caution Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device).
5 Handling the Lead-free Solder

5.1. About lead free solder (PbF)
Distinction of PbF P.C.B.: P.C.B.s (manufactured) using lead free solder will have a PbF stamp on the P.C.B. Caution: Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70F (30 - 40C) higher. Please use a high temperature soldering iron. In case of soldering iron with temperature control, please set it to 700 20F (370 10C). Pb free solder will tend to splash when heated too high (about 1100F/600C). When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the soldering points with the Pb free solder until it melts enough.
6 Cautions to be taken when handling Optical Pickup

The laser diode used inside optical pickup could be destroyed due to static electricity as a potential difference is caused by electrostatic load discharged from clothes or human body. Handling the parts carefully to avoid electrostatic destruction during repair.
6.1.
Handling Optical Pickup
1. Do not impact on optical pickup as the unit structurally uses an extremely precise technology. 2. Short-circuit the flexible cable of optical pickup remove from the circuit board using a short-circuit pin or clip in order to prevent laser diode from electrostatic destruction (Refer to Fig. 6.1 and Fig. 6.2) 3. Do not handle flexible cables forcibly as this may cause snapping. Handle the parts carefully (Refer to Fig. 6.1) 4. A new optical pickup is equipped with an anti-static flexible cable. After replacing and connecting to the flexible board, cut the anti-static flexible cable. (Refer to Fig. 6.1)
6.2.
Cautions to be taken during replacement of Optical Pickup
Supplied optical pickup is equipped with a short clip found its flexible cable in order to prevent electrostatic destruction of laser diode. Before connection, remove the short clip, and check that the short land is opened. (Remove solder if the part is short-circuit).
6.3.
Grounding for Preventing Electrostatic Discharge
1. Human body grounding Use the anti-static wrist strap to discharge the static electricity accumulated in your body. (Refer to Fig. 6.2) 2. Work place grounding Place a conductive material (conductive sheet) or ironboard where optical pickup is placed. (Refer to Fig. 6.2) Note : Keep your clothes away from optical pickup as wrist strap does not release the static electricity charged in clothes.
Fig. 6.2
7 Precaution of Laser Diode

CAUTION : This unit utilizes a class 1 laser. Invisible laser radiation is emitted from the optical pickup lens. Wavelength: 665nm/790nm. Maximum output radiation power from pickup: 100W/VDE When the unit is turned on : 1. Do not look directly into the pick up lens. 2. Do not use optical instruments to look at the pick up lens. 3. Do not adjust the preset variable resistor on the pickup lens. 4. Do not disassemble the optical pick up unit. 5. If the optical pick up is replaced, use the manufacturers specified replacement pick up only. 6. Use of control or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
n Use of Caution Labels
8 Accessories
Remote control
AC power supply cord (for GCS)
AC power supply cord (for GN only)
Audio/video Cable
9 Operation Procedure
10 Disc information
10
11
12
11 About HighMAT
11.1. What is HighMAT?
This word combines the abbreviations of Matsushita Electric Industrial Co. Ltd. and High Performance Media Access Technology, and is a trademark of Microsoft Corporation. The products with the HighMAT logo shown below are made according to the HighMAT standard. HighMAT is a format that allows users to save digital contents such as photographs, audio, and images on a CD. This gives consistency in the way of reading data when general consumer products (such as DVD players) and PCs are used, and thus, it is easy to operate for the user.
11.2. Why use HighMAT?

Up to now, there was no harmonized standard from playing digital content stored in CD-ROM formats (including CD-R) on consumer products like DVD players.Therefore, we used to have problems such as follow: There was no common play list or attached information on contents, which is called metadata. The data compression method differed according to the equipment. As the number of CD-ROMs recorded increased retrieved the contents became more difficult. Because display and operation methods were different depending on the equipment, the play order of the content on the same disc could change.
11.3. The advantages of using HighMAT

Applying the HighMAT standard will solve the following problems and will improve usability. It will create a common user interface for both PC and consumer products.
Regardless of the types of consumer products, such as DVD players, portable CD players, car stereos, and micro computers, a consistent way to pay for digital content will be created and it will make it easier to retrieve data.
13
You can also play digital content on the disc, which was created in accordance with the HighMAT format with a conventional CD-ROM player.
11.4. Outline of the HighMAT standard

1. Recording medium CD-R/CD-RW Supports ISO 9660 Level Expanded Joliet For multiple session
2. Support data format Level 1 player: WMA, MP3 (MPEG-1 Audio Layer 3) Level 2 player: WMA, MP3 (MPEG-1 Audio Layer 3), JPEG Level 3 player: WMA, MP3 (MPEG-1 Audio Layer 3), JPEG, WMV, MPEG4 (optional) 3. Limitation of data format
14
WMA, MP3 (MPEG-1 Audio Layer 3) 64 kbps - 160.999 kbps, 44.1 KHz, stereo, fixed bit rate/ variable bit rate. WMA, V2 and above, excluding Lossless/Voice/Pro JPEG: Max 6M pixel, Maximum file size: 3 MB 4. Limitations regarding the number of files on the media, etc. Total number of audio files: Maximum 450 Total number of still picture files: Maximum 999 Total number of animation files: Maximum 200 Total number of directories: Maximum 400 Length of a file name: Maximum 108 characters (Unicode) Total number of play lists: Maximum 200 Number of contents in the playlist: Maximum 900 5. Composition of HighMAT disc Menu: Classified for the navigation of the HighMAT digital contents. When menu selected, its submenu or the play list will be displayed. Play list: A list in which one or more digital contents are arranged in order Group: Sub-divided group of a play list. Digital Contents: Audio, still picture, and animation data.
15
12 Procedure for repairing the set
16
12.1. Distinguish the trouble cause
How to distinguish the trouble 1. View mechanism part if visual damage occurred. Confirm the movement of mechanism parts assembly (tray assy, loading mechanism assy, etc.).
Cause 1 1. Power supply problem 2. Main P.C.B. 3. Power Switch P.C.B. Cause 2 1. Mechanism block 2. O.P.U. 3. Circuit
2. Diagnose if Optical Pickup Unit is faulty (refer to diagnosis of Optical Pickup Unit). 3. If mechanism and OPU are OK, it is P.C.B.
Possible fault Power switch (S6611), AC inlet (P1001) D1002, D1011, F1001, IC1021, L1001, Q1051, T1021, IC1101 CPU (IC6001), X6001, IC6061, IC6062 Possible fault Tray and loading mechanical block, traverse unit, CPU (IC6001) Refer to the diagnosis of OPU LD drive, servo (Traverse, Focus, Tracking unit), IC8271 & IC8251 Disc sensor (Pin 124, 126) of IC8001) FL (DP6501) unit, IC6501 (CPU), Pin 1 to 4 (FP6501) Possible fault Traverse block (Tilt adjustment) Refer to the diagnosis of OPU Servo (Focus, tracking) IC8271, Motor Drive (IC8251)
4. Display Unit (No display) Cause 3 1. Mechanical block 2. O.P.U. 3. Circuit
17
Cause 3 4. Main CCT 5. DVD Module CCT Audio Video Audio Video
Possible fault signal processing (IC4310, IC4302, IC4303 & IC4304) signal processing (IC3501) - pin 31, 25, 22, 19 signal processing (IC8451) - pin 13, 14, 9, 10, 11, 12 signal processing (IC8001)
18
12.2. Diagnosis of Optical Pick-up Unit
How to distinguish Laser destruction/damage Confirmation 1 Remove cover of mechanism block so that you will see the lens of optical pickup. Confirm emission of laser at the moment when power switch is turned on. If there is no laser emission, laser diode is faulty. Confirmation 2
19
While holding Pause and Open/Close button, press Display button on the remote controller. Unit display laser current on FL. From the reading of display, you can judge if laser diode is damaged or not. Reading on the right side should be less than 70. If reading is more than 70, laser is damaged. How to confirm if Optical Pickup is OK Confirmation 1 1. Confirmation of jitter value with test disc. (Refer below for how to check jitter) 2. Lens cleaning. 3. Reconfirm jitter value. 4. Perform tile adjustment. (Refer to tilt adjustment) 5. Reconfirm jitter value. (To confirm jitter value, while pressing Pause and Open/Close button, press numeric 5 on remote controller.) Unit display jitter value on FL. Confirmation 2 If servo is very unstable due to optical error and you cannot confirm jitter value, clean the lens and check appearance of pick up unit (cutting coil of actuator, etc), then check circuitry.
20
13 Optical Pickup Self-Diagnosis and Replacement Procedure

13.1. Self-diagnosis
This unit is equipped with the optical pickup self-diagnosis function and the tilt adjustment check function. Follow the procedure described below during repair in order to perform self-diagnosis and tilt adjustment effectively. Especially when NO DISC is displayed, be sure to apply the self-diagnosis function before replacing with an optical pickup. Replacement of optical pickup generally requires when the present value of laser drive exceeds 70 (DVD) or 55 (CD). Note: Start diagnosis within three minutes after turning on the power (as diagnosis fails when the unit becomes warm).
21
13.2. Cautions to Be Taken During Replacement of Optical Pickup and Spindle Motor
Before replacing the optical pickup and spindle motor, check for the total usage time respectively. Follow the checking method described below.
Item Checking DVD, CD laser usage time Player mode and button combination In STOP mode, press PAUSE and FWD-SKIP buttons on the player, and 5 button on the remote control unit. While displaying Timer 1 data, press STOP and FWD-SKIP buttons on the player, and 5 button on the remote control unit. In STOP mode, press PAUSE and FWD-SKIP buttons on the player, and 6 button on the remote control uit. While displaying Timer 2 data, press STOP and FWD-SKIP buttons on the player and 6 button on the remote control unit. Display T1_xxxx_yyyy xxxx(DVD), yyyy(CD): total time is displayed with a four-digit number by the ten hours. T2_xxxx xxxx: total time is displayed with a four-digit number by the ten hours. T1_0000_0000
Checking spindle motor usage time
Resetting DVD, CD laser usage time
Resetting spindle motor usage time
T2_0000
13.2.1. Cautions to be taken during replacement of optical pickup

Optical pickup could be damaged due to the static electricity discharged from human body. Wear proper protection gear against static electricity during optical pickup and its peripheral repair. (Refer to Cautions to Be Taken When Handling Optical Pickup.) Do not touch laser diode, actuator and their peripherals. Do not check laser diode with a tester and such. (The tester will be destroyed.) For short-circuiting or removing laser diode, the use of an anti-static soldering iron is recommended. (Recommended model: HAKKO ESD product) Solder the land of the flexible cable in the optical pickup. Note: If an anti-static soldering iron is not available, short-circuit the terminal surface of the flexible cable and then the land using a clip or equivalent device.
22
14 Self-Diagnosis Function
This unit is equipped with the self-diagnosis function, which displays an error when it occurs, for use during servicing.
14.1. Automatic Displayed Error Codes

14.1.1. Automatic Display Function
For a power unit error, the code is automatically displayed. F61: Automatically displayed on the LCD of the player.
14.1.2. Re-Display
For F61 Display When the code, F61 is displayed, the power is automatically turned off. The code, F61 is displayed for three seconds, and then the current time appears. To retrieve the code, turn on the power button so that the code F61 appears, however, is switched to time display after three seconds, and the power is automatically turned off.
14.1.3. Description of Error Code 14.1.3.1. F61

State, Condition When the power is turned on, the unit is automatically turned off. The power does not turn on. Cause, Troubleshooting Power circuit system failure and/or direct current flown to speaker terminal. Identify the cause and replace with new parts.
14.2. Memorized Error Codes

14.2.1. Activating Self-Diagnosis Function and Displaying Method
1. Turn on the power. 2. Select DVD/CD function. With no DVD/CD inserted in the player, press and hold down the PAUSE button for at least two seconds, and press the OPEN/CLOSE button for at least two seconds in order to display F_ _ _. 3. Press the 0 button on remote control. If a memorized error is detected, the result of self diagnosis is displayed. If several errors are detected, press the button to display each.
Fig. 13-1
14.2.2. Re-Display
Press the power button to turn off the power, and then turn on the power. The details of self diagnosis are stored in the unit memory. To retrieve them, follow the procedure described the above, Activating Self-Diagnosis Function and Displaying Method.
14.3. Service Mode Table 1

The service modes can be activated by pressing various button combination on the player and the remote control unit.
23
Player buttons PAUSE + OPEN/CLOSE
PAUSE SKIP/SEARCH<< OPEN/CLOSE PAUSE
Remote control unit buttons Application 0 Displaying the UHF display F _ _ _ 5 Jitter check, tilt adjustment *Display show J_xxx_yyy_zz yyy and zz shown to the right have nothing to do with the jitter value. yyy is the error counter, while zz is the focus drive value. Refer to Section 16.1.4 for Optical Adjustment (Optical Pickup Tilt Adjustment) 6 Checking the region numbers and broadcast system 7 Checking the program version 9 Lighting Confirmation Function of Display Tube DISPLAY Checking the laser drive current PAUSE Writing the laser drive current value after replacing the optical pickup (do not use for anything other than optical pickup replacement) Initializing the DVD player (restoring factory preset settings) *Use when replacing a microprocessor, microprocessor peripheral, or P.C.B.
14.4. DVD/CD Self-Diagnosis Error Code Description

Error Code H15 H16 Error Code U.H.Error U11 H01 H02 H03 H04 H05 H06 DSC system F500 F501 F502 F503 F505 F506 Disc Code F103 IIC Error F4FF F880 F890 F891 F893 F894 F8A0 F897 State, Conditon The disc tray cannot be opened: it closes spontaneously. The disc tray cannot be closed: it opens spontaneously. Meaning Focus servo failure Tray loading failure Spindle servo failure Traverse motor failure Tracking servo error Seek timeout failure Power supply error DSC failure DSC not Ready failure DSC Time out failure DSC communication failure DSC Attention Error Invalid media Cause, Troubleshooting Disc tray open/close detection switch (S1001) failure. (Check and replace) Details
(Spindle servo, DSC, SP motor, CLV servo failure)
DSC stops due to servo failure. (Startup, focus failure, etc.) Communication failure between DSC and system computer (No communication because DSC does not move) See F500. Communication failure (Result failure occurs after communication command is transmitted.) See F500. Disc is placed upside down; TOC is unreadable or invalid disc is inserted. Disc standard is possibly illegal when highlight is displayed.
Ilegal highlight position Forced initialization failure (Time out) Unsuitable task number A message is sent during AV task transmission Unable to transmit a message to AV task DVD module problem EEPROM failure Unsuitable message command Main unit not initialized properly
When a message arrives from not existing task During transmission of a message to AV task When transmission of a message to AV task starts Firmware version When transmission of a message to AV task starts When power-up, (Do initialization of main unit)
14.5. Error Codes Stored During No Play

Error Code F0BF F0C0 F0C1 F0C2 Meaning 6) Unable to replay due to physical layer identification failure 8) DVD: Unable to replay due to no DVD Video/Audio/VR 9) DVD: Prohibited due to illegal regional code A) DVD: No replay due to PAL system System Computer Item PCND_NOPLAY_PHYSICAL 0x50 PCND_NOPLAY_VIDEO 0x70 PCND_NOPLAY_RCD 0x80 PCND_NOPLAY_PAL 0x90 Setting Task DriveManager DiscManager DiscManager DiscManager Internal error in system computer 0xD0BF 0xD0C0 0xD0C1 0xD0C2
24
Error Code F0C3 F0C4 F0C5
Meaning
System Computer Item
Setting Task DiscManager DiscManager DiscManager
B) DVD: All title replay prohibited in PCND_NOPLAY_PTL 0xA0 parental setting C) VCD: Prohibited due to PHOTO CD PCND_NOPLAY_PHOTOCD 0xB0 format D) VCD/CD: Prohibited due to CD-ROM PCND_NOPLAY_CDROM 0xC0 without CD-DA
Internal error in system computer 0xD0C3 0xD0C4 0xD0C5

Pressing various button combinations on the player and remote control unit can activate the service modes.
Item Player mode and button combination In STOP mode, press PAUSE & OPEN/CLOSE button on the player, and 5 button on the remote control unit. Function Display Cancellation method Press STOP or OPEN/CLOSE button.
Jitter check
Jitter check. Jitter check is measured and displayed. Measurement is repeatedly done in the cycle of one second. Read error counter starts from zero upon mode setting. When target block data failed to be read out, the counter advances by one increment. When the failure is cause by mirror error, it may be corrected when retried to enable successful reading. In this case, the counter advances by one. When the erroe persists even after retry, the counter may jump by two or more. Error code In STOP mode, Error code check. check press PAUSE and The latest error code stored in OPEN/CLOSE EEPROM is displayed. buttons on the player, and 0 button on the remote control unit. *With pointing of cursor up and down on display, the panel controller switches serial number of history and sends out the command accordingly. Initial setting In STOP mode, Initial setting of laser drive current initial of laser drive press PAUSE and current value for each of DVD laser and current OPEN/CLOSE CD laser is separately saved in buttons on the EEPROM. player, and PAUSE button on the remote control unit.
Jitter rate is shown in decimal notation to one place of decimal. Focus drive value is shown in hexadecimal notation. Error code (play_err) is express in the following Cancelled convention. automatically 5 Error code=0 x DAXX is expressd: nn UXX seconds later Error code= 0 x BDXX is expressed: nn HXX Error code= 0 x DXXX is expressed: nn FXXX Error code= 0 x 0000 is expressed: nn F- - *nn denotes the serial number of history.
Cancelled automatically 5 seconds later.
The value denotes the current in decimal notation. The above example shows the initial current is 34mA and 28mA for DVD laser and CD laser respectively when the laser is switched on. DVD laser drive current measuremen t In STOP mode, DVD laser drive current measurement DVD laser drive current is press PAUSE measured and the result is button on player, displayed together with the initial and DISPLAY value stored in EEPROM. button on the remote control unit. After the measurement, DVD laser emission is kept on. It is turned off when POWER key is switched off. (It is also turned off when the primary power is switched off.) ADSC In STOP mode, ADSC internal RAM data check ADSC internal RAM data is read internal RAM press PAUSE and out and displayed. data check OPEN/CLOSE Change the address with CLEAR button on the key operation to show the data for player, and 11 addresses. RETURN button on the remote control unit. Cancelled automatically 5 seconds later.
The value denotes the current in decimal notation. The above example shows the initial current is 34mA and the measured value is 32mA. Press STOP or OPEN/CLOSE button.
The value is shown in hexadecimal notation. The above example shows the data in ADSC address DFah is 6901h.
25
Player mode and button combination Servo In STOP mode, process press PAUSE and display FWD-SKIP buttons on the player, and 7 button on the remote control unit. CD laser In STOP mode, drive current press PAUSE and measuremen FWD-SKIP buttons t on the player, and DISPLAY button on the remote control unit.
Item
Function
Display
Cancellation method Turn off secondary power.
Servo process displayed. The servo process from STOP to ACCESS is displayed.
Version display
CD laser drive current measurement. CD laser drive current measured and the result is displayed together with the initial value stored in EEPROM. After the measurement, CD laser emission is kept on. It is turned off when POWER key is switched off. (It is also turned off when the primary power The value denotes the current in decimal notation. is switched off.) The above example shows the initial current is 28mA and the measured value is 26mA. In STOP mode, Version display. Cancelled press PAUSE and automatically 5 OPEN/CLOSE seconds later. buttons on the player, and 7 button on the remote control unit.
Lighting of In STOP mode, display tube press PAUSE and OPEN/CLOSE buttons on the player, and 9 button on the remote control unit. Dealers lock In STOP mode, press STOP button on the player, and POWER button on the remote control unit. Initialization
Lighting of display tube
Press STOP or OPEN/CLOSE button.
Region display
LOCKED sign appears when dealers lock is Dealers lock. swiched on, or when secondary power key or The lock is switched ON or OFF. tray opening key is pressed while the lock is When dealer;s lock is ON, it prohibits on. switching off of the secondary power and tray opening. UNLOCKED sign appears when dealers lock When the lock is switched, its ON/OFF is switched off. status is stored in EEPROM. In STOP mode, Initialization. INITIALIZED press PAUSE, User settings are cancelled and player FWD-SKIP and is iniitialized to factory setting. OPEN/CLOSE buttons on the player for 3 seconds or longer. In STOP mode, Region display press PAUSE and OPEN/CLOSE buttons on the player, and 6 button on the remote control unit.
Repeat the same operation.

Item Player mode and button combination In STOP mode, press PAUSE and FWD-SKIP buttons on the player, and 5 button on the remote control unit. Function Display Cancellation method
Timer 1 check
Timer 1 check. Laser operation timer. Operation time is measured separately for DVD laser and CD laser.
Timer 1 reset
While displaying Timer 1 data, press STOP and FWDSKIP buttons on the player, and 5 button on the remote control unit.
T1_1234_5678. Shown to the left is DVD laser time, and to the right is CD laser time. Time is shown in 4 digits of decimal notation in a unit of 10 hours. 0000: will follow 9999. (You may have to press the FL select button on the remote control to view the remaining text when the text is too long to display on the FL at one time). Timer 1 reset. T1_0000_0000. (You may have to press the :FL Laser operation timer. Operation time select button on the remote control to view the of both DVD laser and CD laser is remaining text when the text is too long to display on the FL at one time). reset all at once.
26
Item
Timer 2 check
Timer 2 reset
Player mode and button combination In STOP mode, press PAUSE and FWD-SKIP buttons on the player, and 6 button on the remote control unit. While displaying Timer 2 data, press STOP and FWDSKIP buttons on the player and 6 button on the remote control unit.
Function
Display
Cancellation method
Timer 2 check. Spindle motor operation timer.
T2_1234. Cancelled Time is shown in 4 digits of decimal notation in a automatically 5 unit of 10 hours. seconds later. 0000 will follow 9999.
Timer 2 reset. Spndle motor operation timer.
T2_0000
14.8. Lock Function

This function prohibits removal of disc and some disc operations to prevent loss of disc at a shop during sales promotion or equivalent occasions. While this function is activated, the player displays ___LOCKED_ if any button is touched.
14.8.1. Setting
Prohibiting removal of disc 1. Select the DVD/CD function. 2. Press and hold down the button on the player and the power button on the remote controller unit for at least three seconds. (The message, ___LOCKED_ appears when the function is activated.) Note: OPEN/CLOSE button are invalid and the player displays ___LOCKED_ while the lock function mode is entered. Prohibiting operation of selector and disk 1. Select the DVD/CD function. 2. Press and hold down the button on the player and the power button on the remote controller unit for at least three seconds. (The message, ___LOCKED_ appears when the function is activated.) Note: The following buttons are invalid and the player displays ___LOCKED_ while the lock function mode is entered.
14.8.2. Exiting Lock Function

While the lock function is activated, press the buttons which are used to enter the mode. (___LOCKED_ appears for one second, and then _UNLOCKED_ appears. (After this, the lock function is deactivated.)
14.9. Things to Do After Repair

Follow the procedure described below after repair. 1. While the power is on, press the button to close the tray. 2. Press the power button to turn off the power. 3. Unplug the power cable. Note: It is prohibited to unplug the power cable while the tray is opened and to close the tray manually.
27
15 Service precautions
15.1. Recovery after the player is repaired
When FLASH ROM or Module (2) P.C.B. is replaced, carry out the recovery processing to optimize the drive. Playback the recovery disc to process the recovery automatically. Recovery disc (Product number=RFKZD03R005) Performing recovery 1. Load the recovery disc (Product number: RFKZD03R005) to the player and run it. 2. Recovery is performed automatically. When it is finished, a message appears on the screen. 3. Remove the recovery disc. 4. Turn off the power. Note: This unit requires no initialization process carried out after the traditional DVD players were repaired. When the recovery measures are taken, the customer setting will return to the factory setting as same as the procedure described in item Initialization in 13.6 is carried out. Write down the contents of the setting before recovery processing and reset the player.
15.2. DVD Player Firmware Version Upgrade Process

Firmware of DVD player may upgrade to conform to improvement of its performance and quality including operational range, playability of non-standardized discs, etc. The version upgrade disc contains the recovery function, and the recovery disc is not necessary. Note: Version upgrade process cannot be complete if the AC power is cut off due to power failure and other occasions during the process. If this occurs, replace FLASH ROM and restart version upgrade. Version upgrade disc number is informed when ordered.
15.3. Firmware Version Upgrade Process by Using Recovery Disc

Recovery process Firmware version upgrade process Both of the above procedures automatically start when the recovery disc is replayed.General CD-R disc allows version upgrade process and recovery process, making version upgrade through disc simple. Recovery process: Optimization process of player after replacement of FLASH ROM, EEPROM, or DVD Module Circuit board Version upgrade process: Renewal of firmware for improvement of operational range and performance
15.3.1.
Version Upgrade Process
1. Insert the recovery disc to the player to replay. 2. The version of player is automatically checked and prompts if necessary. 3. Select version upgrade process using the cursor keys on the remote controller unit. (Select YES or NO) 4. a. If YES is selected, the process starts. b. If NO is selected, only the recovery process is applied.
28
5. a. When the version upgrade process is complete, a message of completion appears on the screen. Remove the disc. b. Follow the instruction appearing on the screen, and remove the disc. 6. Turn off the power.
29
16 Disassembly and Main Component Replacement Procedures

16.1. Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the servicing. To assemble the unit, reverse the steps shown in the chart as below.
30
16.2. Printed Circuit Boards (P.C.B.) Position
31
16.3. Disassembling of Top Cabinet

Step 1 Remove 4 screws. Step 2 Remove 3 screws, and push the top cabinet backwards to lift up.
16.5. Disassembling of Front Panel

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 2) of Item 16.4. Step 1 Release 2 claws on each side and 3 claws below the unit.
16.4. Disassembling of DVD Lid

Follow the (Step 1) - (Step 2) of Item 16.3. Step 1 Keep the close lock gear pressed in clockwise, move the tray assembly in the direction of the arrow.
Step 2 Disconnect FFC board connector (CN6004).
Step 3 Draw the front panel unit forward.
Step 2 Remove dvd lid. Step 3 Release the close lock gear and slide the disc tray backward as arrow shown.
Step 4 Remove 2 screws, draw the Panel P.C.B. forward.
Step 5 Remove 5 screws, Power P.C.B. and 10 Key P.C.B. show.
32
16.6. Disassembling of Rear Panel

Follow the (Step 1) - (Step 2) of Item 16.3. Step 1 Remove 5 screws.
Step 2 Remove rear panel.
16.7. Disassembling of Tray Assembly

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Step 1 Keep the close lock gear pressed in clockwise, move the tray assembly in the direction of the arrow.
Step 4 Flip the tray, use extension cable to connect CN6002. Step 2 Hold close lock gear, push and release the 4 claws in the direction of arrow, and then remove the tray assembly.
16.8. Disassembly of Main P.C.B.

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 5) of Item 16.5. Follow the (Step 1) - (Step 2) of Item 16.6. Step 1 Remove 5 screws.
Step 3 Detach FFC CN6002. Step 2 Flip Main P.C.B.
33
16.9. Disassembly of Tray Base Guide (L) and Tray Base Guide (R)
Follow the (Step 1) - (Step 2) of Item 16.8.
Step 1 Remove the 2 screws. Step 2 Remove the tray base guide (L) and tray guide (R) in the direction of arrow.
16.10. Disassembly of Tray Base

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4.
Step 1 Remove tray screw, tray spring and teflon washer. Step 2 Remove rotary tray.
16.11. Disassembly of Open Lock Gear

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 3) of Item 16.7.
34
Step 1 Rotate open lock gear in the direction of arrow. (Anticlockwise)
Step 2 Rotate close lock gear to direction of arrow, press claw (b) and pull out close lock gear.
16.13. Disassembly of the Tray Motor P.C.B. and Sensor P.C.B.

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 3) of Item 16.7. Step 1 Remove 2 screws.
Step 2 Release claw of open lock gear, remove open lock gear in the direction of arrow .
16.12. Disassembly of the Close Lock Gear & Close Lock Gear Spring
Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 3) of Item 16.7. Follow the (Step 1) - (Step 2) of Item 16.10. Step 2 Release 4 claws at Tray Motor P.C.B. and Sensor P.C.B..
16.14. Disassembly of the CD Traverse Unit

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 3) of Item 16.7. Step 1 Remove 2 screws. Step 2 Rotate cam gear anti-clockwise. (Align at position (B) as marking on gear with arrow)
Step 1 Hold close lock spring to claw (a).
35
Step 3 Flip the base mech unit in vertical position.
Step 3 Release the 2 claws in the direction of arrow (1), and then push the pulley pin in the direction of arrow (2).
16.16. Disassembly of Loading Motor P.C.B.

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Step 4 Press upward (a), push backward (b) and press to left (c) to release CD traverse unit. Step 5 DVD Module P.C.B. is show. Follow the (Step 1) - (Step 3) of Item 16.7. Step 1 Remove 2 screws. Step 2 Remove 2 screws.
16.15. Disassembly of the Pulley Gear

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 3) of Item 16.7. Step 1 Remove of the Tray belt.
Step 3 Remove Loading Motor P.C.B.
16.17. Disassembly of Drive Gear (A) & (B)

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Step 2 Flip the base mecha. Follow the (Step 1) - (Step 3) of Item 16.7.
36
Follow the (Step 1) - (Step 3) of Item 16.15. Step 1 Release the claw in the direction of arrow (1), and then push drive gear shaft up.
16.19. Disassembly of Cam Gear & Support Piece

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 3) of Item 16.7. Step 1 Rotate (A) in cam gear anti-clockwise.
Step 2 Remove 1 screw. Step 2 Remove Drive Gear (A) and Drive Gear (B). Step 3 Remove support piece.
16.18. Disassembly of Magnet Holder washer, Magnet and Clamper

Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 3) of Item 16.7. Follow the (Step 1) - (Step 4) of Item 16.14. Step 1 Release 3 claws in the direction of arrow.
16.20. Disassembly of Slide Plate (L) & (R) and Change Lever
Follow the (Step 1) - (Step 2) of Item 16.3. Follow the (Step 1) - (Step 3) of Item 16.4. Follow the (Step 1) - (Step 3) of Item 16.7. Follow the (Step 1) - (Step 5) of Item 16.19. Step 1 Press the claw and push the Slide Plate (L) up.
37
Step 2 Remove slide plate (L) & (R) and change lever as arrow shown.
Step 2 Make sure drive gear (A) at vertical position.
Step 3 Push tray base to the direction of arrow shown.
16.21. Assembly of Tray Base

Step 1 Rotate cam gear anti-clockwise. Align at position (C) as marking on gear with arrow.
38
17 Service Position
17.1. Checking Procedure
Note: For the disassembling procedure, see Section 16.
17.2. Checking the Main P.C.B. , Panel P.C.B, Selection Panel P.C.B. and Display Panel P.C.B.
1. Disassembly of Top Cabinet. 2. Disassembly of DVD Lid. 3. Disassembly of Panel, 10 Key & Sensor P.C.B.. 4. Disassembly of Rear Panel. 5. Disassembly of tray assembly. 6. Disassembly of Main P.C.B.
39
18 Adjustment Procedures
18.1. Service Tools and Equipment
18.1.1. Usage Equipment
Application Tilt adjustment Name DVD test disc TORX screw driver (T6) Hanari Grease Drysurf CD test disc Recovery disc Number DVDT-S15 or DVDT-S01 Available on sales route. (T6) or RFKZ0185 VFK1784 RFKXPG641 RFKXGUD24 PVCD-K06 and any other commercially available disc RFKZD03R005
Others
Confirmation
18.1.2. 18.1.2.1.
Important points in adjustment Important points in Optical Adjustment
Before starting optical system adjustment, be sure to take anti-static measures. Optical adjustment (optical pickup tilt adjustment) is required after following parts are replaced: 1. Optical pickup unit. 2. Spindle motor assembly unit. 3. Optical pickup peripherals (such as a rail) Note: Optical adjustment is not necessary after replacement of other parts inside the traverse unit. However, may require when picture deterioration is detected. Optical adjustments cannot be applied to the inside of optical pickup. When a traverse unit is replaced, the adjustment is not necessary.
18.1.3. Storing and Handling Test Discs

Surface precision is vital for DVD test discs. Be sure to store and handle them carefully. Do not place discs directly onto the workbench, etc, after use. Handle the discs carefully in order to maintain their flatness. Place them into their case after use and store them vertically. Store discs in a cool place where they are not exposed to direct sunlight or air from air conditioned. Accurate adjustment will not be possible if the disc is warped when placed on a surface made of glass, etc. If this happens, use a new test disc to make optical adjustments. If adjustment is done using a warped disc, the adjustment will be incorrect and some discs will not be playable.
40
18.1.4. Optical Adjustment (Optical Pickup Tilt Adjustment)

Adjustment point Tangential adjustment screw Tilt adjustment screw Measuring equipment None (LCD display of the player is used.) Measurement point Mode T1 (inner track) replay T43 (outer track) replay Disc DVDT-S15 or DVDT-S01
Adjustment value Adjust that jitter value becomes minimum.
18.1.4.1.
Adjustment Procedure
adjustment. 2. Repeat adjusting two or three times to find the optimum point. 3. Finish the procedure with tilt adjustment.
1. While the player is stopped and no disc is inserted, select the DVD function. Press and hold down the button on the player and the number button, 5 on the remote controller unit. 2. Check that J_xxx_yyy_zz is appearing on the display. For your information: The values, yyy and zz are not associated to jitter value. yyy indicates the frequency of error occurrence. zz indicates the focus drive value. Note: Jitter value appears on the display. 3. Play test disc T30 (central periphery). 4. Adjust tangential adjustment screw so that the jitter value is minimized. 5. Play test disc T30 (central periphery). 6. Adjust tilt adjustment screw 1 so that the jitter value is minimized. 7. Play test disc T30 (central periphery). 8. Adjust tilt adjustment screw 2 so that the jitter value is minimized. 9. Repeat adjusting tilt adjustment screws 1 and 2 alternately until the jitter value is minimized. 10. Finally please reproduce T01 (inner periphery) and T43 (outer periphery) and check the jitter value. (Please readjust, when the jitter value is extremely different.)
18.1.4.3. Check After Adjustment

Play test disc or any other disc to make sure there is no picture degradation in the inner, middle and outer peripheries, and no audio skipping. After adjustment is finished, lock each adjustment screw in position using screw lock.
18.1.4.4. Procedure for Screw Lock

1. After adjustment, remove top cover, tray, clamper base and traverse unit in this sequence. 2. Lay the traverse unit upside down, and fix adjustment screw with screw lock. 3. After fixing, reassemble traverse unit, clamper base, tray and top cover.
Fig. 18-1
Fig. 18-2
18.1.4.2. Tips
1. Make tangential adjustment first, and then make tilt 41
19 Illustration of ICs, Transistors and Diodes

C9ZB00000431 (34p) C3ABPG000068 (54p) C0GBG0000033 C0GBF0000004 C0GBG000044
28 22 21
C0ABBB000118
5
C0GAG0000007
C0FBBK000036 (48P) MN101C28DHA (80P) MN101C07AHB (64P) MN2DS0003APH
C0DACZH00006 (5P) C0DACZH00007 (5P) C0JBCA000066 (5P)
8
15
1 7 8 14
4 1
C0DBZHG00017 (5P)
C0EBE0000106
B3RAD0000035
C0CBCBD00018 C3EBGC000055
C3FBMD000134
B3NAB 0000027
3 2
1 5
1
2SC22950XL
32
B1BCCD000013
2SB14170JA
B1DDCC000009
B0EDKT000002
B3NAA0000068 B3PBA0000104
4
3
4 1
1
C E
1 2
C0EBE0000384 2SB1219AHL C0EBA0000031 C0DAEMZ00001
5
2
2SD132800L 2SD0601AHL 2SD1819A0L UNR221300L UNR221200L UNR221100L UNR511F00L UNR521100L MA2J11100L 2SB09700RL UNR511V00L
2SC3311ASA
XN0150100L
1
3
4
5
B CE
XN0431100L
1 2
1 2 3
1 2
MAZ41800MF
Ca Cathode
B3ABA0000397
B0HAGM000006
Ca Cathode A
B3AAA0000534
Anode Cathode A Ca
A
Anode
3 2 1
Anode
MAZ42000LF MAZ41000HF MAZ41000mF MAZ41600LF
Ca
Cathode
A
Anode
MA2J72800L MA2C16500E B0JAME000037 MA2S11100L B0HADV000001
42
20 Block Diagram
OPTICAL PICKUP
HFM
17 OUT 16 LD(DVD)
LDU
TRACKING COIL
LD(CD)
SUB1 SUB2 VREF FE1 FE2 SW 1M TC TD RF TB TA
VCC
15
14
13
11
VREF1
SUB1
RF
T+
FOCUS COIL
SPINDLE MOTOR UNIT
LDDVD
PIN(CD)
SUB2
HFN
HU+
F+
FE1(DVD/CD)
PIN(DVD)
FE2(DVD/CD)
TA(DVD)
LDCD
HW+
HV+
H-
SUBSEL
VREF2 (RF-)
TD(DVD)
TC(DVD)
TB(DVD)
COIL_U
HU-
HV-
FEED+
FEED-
13
V01-
14
V01+
11
V02-
COIL_W
COIL_V
12
V02+
17
V03+
18
V03-
2
A3
4
A2
7
A1
9
H1+
10
H1-
HW-
11
H2+
12
H2-
13
H3+
14
H3-
15
VH
Q8552 SWITCH
Q8562 SWITCH
BIAS
1 4 24 21 25 26
EC PS FG
IC8251 C0GBG0000044
OPIN+ LDIN BIAS2
IC8271 C0GBF0000004
ECR
MOTOR DRIVE
MUTE12 MUTE3 IDCNT VIN3 VIN1 VIN2
MOTOR DRIVE
TRIN
Q8551 SWITCH
Q8561 23 SWITCH 9 27 2 28 3 22 23 24
QR8571
SUPPLY CONTROL SWITCH
78
DRV3
124
LPC01
143
AD0
126
LPC02
82 125 123 130 134 129 133 127 110 111 132 131 136
LPC1 VREFH RFINN LPC2 VIN6 VIN8 VIN9 VIN3 VIN10 VIN7 DRV7 RFINP VIN5
115 135 114 137 116 138 117

VIN1 VIN2 VIN4 VIN3RF VIN4RF VIN2RF VIN1RF
75
DRV0
83
DRV8
146
VCOF/AD4
147
PWM1
139
AD2
148
PWM0
128
VHALF
140
AD1
76
DRV1
79
DRV4
72
FG
81
DRV6
MN2DS0003APH IC8001 LSI
OSCO
OSCI
P9
166
165
59
60
6 X8621
IC8611 C3EBGC000055
EEPROM (NOT SUPPLIED)
43
P8
SW
T-
F-
Q8550 SWITCH
Q8560 SWITCH
D8550
IC8601 C0EBE0000384
VOLTAGE DETECTOR
IC8051 C3ABPG000068
64MB SDRAM
LDQM DQ15 UDQM /RAS /CAS DQ0 BA0 BA1 CLK /WE A16 A20 /CS A11 A0 A0
IC8651 GCS: RFKFCF81J160 GN: RFKFCF81H160
XRESET
12
FLASH ROM
DQ15
Q8606
XWE XCE XOE
DQ0
A15
SWITCH
2,4,5,7,8,10,11, 13,42,44,45,47, 48,50,51,53
22-26, 29-35
20
21
15
39
19
38
18
17
16
9,10,16,17,48
1-8,18-25
29-36, 38-45
11
26
28 Q8605 SWITCH
IC8605 C0EBA0000031
RESET IC
1,2,4,5,7,8,10, 11,13-15,17,18, 252,254,256

MDQ0 MDQ15
217,220,221,223, 224,226-228,230, 233,237,238

MA11 MA0
234 232 249 251 240 243

BA1 DQM1 NCSM BA0 DQM0 MCK
241 244 245 248

MCKI NCAS NRAS NWE
21,30,31,43,45
EXADR16 EXADR20
23-25,27,32, 33,36,37,39-42, 46,47,50,51

EXADT0 EXADT15
192-195,197-200, 203,204,206-208, 210-212

MDQ31 MDQ16
22
NEXWE
38
NEXCE
52
NEXOE
73
NRST
44
A
Y IECOUT STATUS C CMD ZFLAG&AMUTE PR/CR/R PB/CB/B DSPCLK MIXL(R) SL(R) FL(R) SW PY/Y/G CNT
TO MAIN BLOCK
B
1
16(20) 14(13)
VOUT7(8) VOUT1(2)
12(11)
VOUT3(4)
10
VOUT5
9
VOUT6
IC8111 C0CBCBD00018
POWER SUPPLY
5 8
37
IC8451 C0FBBK000036
RSTB
AUDIO DAC
DATA4
BCKIN
LRCIN
SCLKI
DIN1
DIN3
MDO
MDI
MC
45-47
41
31
40
38
33
34
35
36
ML
48 4 4
ZFLGA
IC8695 C0JBCA000066
5 5
IC8691 C0JBCA000066
AND GATE LOGIC IC

1 2
AND GATE LOGIC IC

1 2
QR8420 MUTING SWITCH
174-176
ADOUT2 ADOUT0
169
LRCK
171 170 163

ADOUT3 DACCK SRCK
58
P10
57
P11
56
P12
53
P15
55
P13
149 151 152 156 158

DAC3OUT DAC2OUT DAC1OUT DAC4OUT DAC5OUT
70
P1
177
IECOUT
69
P2
68
P3
45
TO CD DRIVE BLOCK
COUT YOUT C Y PY/Y/G PB/CB/B PR/CR/R 2 6 12 14 16 CIN YIN CYIN CBIN CRIN YSAG CYOUT 33 28 27 25 24 20 Y 24 25 C Y
JK4501 SVIDEO
IC3501 C9ZB00000431
CYSAG
VIDEO SELECTOR
VOUT VSAG CBOUT CBSAG CROUT CRSAG
31 30 22 21 19 18
19
VOUT
17
PB
16
PR
IC4301 C0ABBB000118
OP-AMP (WITH TONE CONTROL)

MIXL(R) 2(6) 1(7) 3(5) 14(13) MIX_L(R)
IC4302 C0ABBB000118
Q4419 (Q4410) MUTING SWITCH (AUDIO)

FL(R) 2(6) 1(7) 3(5)
11(10)
FL(R)
Q4413 (Q4414)
IC4303 C0ABBB000118

SL(R) 2(6) 1(7) 3(5)
MUTING SWITCH (AUDIO)
8(7)
SL(R)
IC4304 C0ABBB000118
Q4415 (Q4416) MUTING SWITCH (AUDIO)

CNT 6 7 5 SW 2 1 3 Q4417 MUTING SWITCH (AUDIO)
CNT
4 Q4418 MUTING SWITCH (AUDIO) Q4511
SW
B JK4502 DIGITAL AUDIO OUT COAXIAL
B
IECOUT
QR3541 SWITCH
SWITCH QR4302 MUTING CONTROL
ZFLAG&AMUTE Q4302 MUTING SWITCH
53
POWER-MUTE
54
WIDE-1
CMD
18
SYS-CMD
STATUS
19
SYS-STAT
MN101C28DHA
DSPCLK 20 SYS-DSPCLK
IC6001 8 BIT 1-CHIP MICROCONTROLLER
46
IC6062 C0GAG0000007
FDP6501
1 Q6571
FL DISPLAY
P10 P11 P15
M9101
TRAY MOTOR
1 7 9
13,14,16,18,20, 23,25,27,30,32
34,36,39-41
10,15,19,22,26, 29,33,37,42
IC6061 C0GAG0000007
M
M9001
CHANGER MOTOR DRIVER

7 9 1
QR6062 SWITCH
SEG6
1G
P1
LOADING MOTOR
47-56
DGT2 SEG15
42-46
DGT6 DGT7
33-41
DGT15
S6531-S6533, S6731-S6736 6 QR6061 SWITCH S6521-S6524, S6721-S6726 5 AN4 AN5
9G
CHANGER MOTOR DRIVER
F+
45 SWITCH
FROM POWER TRANSFORMER
P66/DGT16
32
S6511, S6611-S6618 4 AN3
IC6501 MN101C07AHB
MICROCONTROLLER
B B
Q9103 PHOTO COUPLER QR6591QR6597 Q9001 PHOTO COUPLER D6641D6647
IC6551 B3RAD0000035
21
INFRARED IC
IHQ0/P20
DISC1-5, CDMODE
26-28, 58-60
LED DRIVER
OSC2
OSC1
SBO1
Q9102 PHOTO COUPLER
9 X6501
10
SBT1
SBI1
62
61
63
15
Q9101 PHOTO COUPLER
S9001
LOADING
33 34
POSITION PULSE-SENSOR
5 45
LONG-F AN3
44
LONG-R
31 32
CAM-SENSOR OPEN-SW
28
PWM
47
TRAY-F
46
TRAY-R
21
FL-CMD
22
FL-STAT
23
FL-DSPCLK
56
FL_RESET_L
MN101C28DHA
25
OSC2
RST
12 X6001
13
IC6011 C0EBE0000106
RESET IC
OSC1
47
XRST
T1021
TO FL DISPLAY
IC1155 C0DBZHG00017
POWER SUPPLY
2
P1001 L1001 D1002 F1001
AC INLET
D1011
IC1151 C0DBZHG00017
D1151, D1152 1
POWER SUPPLY
2
B
POWER TRANSFORMER
Q1125,Q1126 D1121 Q4901 SWITCH QR4901 SWITCH
SWITCH/ REGULATOR
Q1082
B B
Q1115 SWITCH (POWER ON/OFF) REGULATOR D1111
Q1081 Q4911 SWITCH QR4902 SWITCH QR1115 SWITCH D1041 D1084 D1082 D1083 REGULATOR
B
D1141
IC1021 C0DACZH00007
Q1045 4 REGULATOR
B
5
POWER SUPPLY
2
D1071
52
NPOFF_L
D1072
Q1051 PHOTO COUPLER
MN101C28DHA

1
IC1101 C0DAEMZ00001
ZA1111
VOLTAGE REGULATOR
SIGNAL LINES
: MAIN SIGNAL LINE : CD-DA (AUDIO /VIDEO) SIGNAL LINE ( ) Indicates the Pin No. of Right Channel. : DVD AUDIO SIGNAL LINE : DVD VIDEO SIGNAL LINE NOTE : Signal Lines are applicable to the Left Channel only.
48
21 Schematic Diagram
(All schematic diagrams may be modified at any time with the development of the new technology) Note: S6511 S6521 S6522 S6523 S6524 S6531 S6532 S6533 S6611 S6612 ~ S6616 S6617 S6618 S6721 S6722 S6723 S6724 S6725 S6726 S6731 S6732 S6733 S6734 S6735 S6736 S9001 : : : : : : : : : : : : : : : : : : : : : : : : : O/C switch Disc - EXC switch Disc Skip switch F- skip switch R- skip switch Stop switch Pause switch Play switch Power switch Disc 1 - 5 switch CD Mode switch DPL II switch [10] switch [5] switch [4] switch [3] switch [2] switch [1] switch [CANCEL] switch [0] switch [9] switch [8] switch [7] switch [6] switch Loading switch
The voltage value and waveforms are the reference voltage of this unit measured by DC electronic voltmeter (high impedance) and oscilloscope on the basis of chassis. Accordingly, there may arise some error in voltage values and waveforms depending upon the internal impedance of the tester or the measuring unit.
No mark : Playback (( )) : CD << >> () Rec : AM <> [] : FM : AUX
Importance safety notice : Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purposes of fire-retardant (resistors), highquality sound (capacitors), low-noise (resistors), etc. are used. When replacing any of components, be sure to use only manufacturers specified parts shown in the parts list. Caution ! IC, LSI and VLSI are sensitive to static electricity. Secondary trouble can be prevented by taking care during repair. Cover the parts boxes made of plastics with aluminium foil. Put a conductive mat on the work table. Ground the soldering iron. Do not touch the pins of IC, LSI or VLSI with fingers directly.
49
21.1. (A) Optical Pickup Unit Circuit

SCHEMATIC DIAGRAM - 1
OPTICAL PICKUP UNIT CIRCUIT
: +B SIGNAL LINE
: CD-DA SIGNAL LINE
TO HFM PCB
2 3 4 5 6
GND VCC GND GND OUT GND
L4 J0JBC0000105 L3 J0JBC0000105 C8 0.1
TO ACT
26 F+ 25 F24 T23 HFM 22 TA 21 20 TD 19 TC 18 FE2 17 FE1 16 GND (IM) 15 RF 14 VREF2(RF-) 13 PIN (DVD) 12 LD (CD) 11 LD GND 10 LD (DVD) 9 GND (OEIC) 8 VREF1 7 VCC 6 SUB2 5 SUB1 4 PIN(CD) 3 SW 2 1 GND (IM) TB
T+
1 2 3 4 5 6 7 8 9 10 11 12 13 14
GND TB TA TC TD FE1 FE2 IM RF GND VREF VCC SUB2 SUB1 R4 0 C2 0.1 R2 0
TO LDU PCB
TO DVD MODULE (IN/OUT) CIRCUIT (FP8501) ON SCHEMATIC DIAGRAM-2
15 SW LD (CD) 16 LD (DVD) 17 LDGND 18
C1 0.1
C3 0.1
R1 0
VR1 6.8K
R3 0
R5 0 R6 0
R7 6.8K VR2 6.8K
C5 22P
C6 22P
L2 J0JCC0000307 C7 0.1 C4 0.22
L1 J0JBC0000105
50
21.2. (A) DVD Module (In/Out) Circuit

SCHEMATIC DIAGRAM - 2 DVD MODULE (IN/OUT) CIRCUIT
: +B SIGNAL LINE : CD-DA SIGNAL LINE
1 NC LB8271 ERJ3GEY0R00V 2 A3 3 NC LB8272 ERJ3GEY0R00V 4 A2 IC8271 5 NC 6 NC 7 A1 29 FIN C8275 0.1 8 GND FP8271 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 COIL_W COIL_V COIL_U H+ HU+ HUHV+ HVHW+ HWHSW(GND) SW FEEDFEED+ TC8271 TC8272 TC8273 TC8274 TC8275 TC8276 TC8277 TC8278 TC8279 TC8280 TC8281 TC8282 TC8283 TC8284 TC8285 TRV-INNER-SW DV2 R8282 100 C8286 0.01 14 H3C8285 0.01 12 H213 H3+ R8281 100 11 H2+ C8284 0.01 10 H19 H1+
RNF 28 Vm 27 GSW 26 VCC 25 FG 24 PS 23 EC 22
C0GBF0000004
MOTOR DRIVE IC LB8273 ERJ3GEY0R00V
IC8271
FIN 30 ECR 21 FR 20 FG2 19 SB 18 CNF 17 BR 16 VH 15 C8287 0.1 CP8273 CP8272
TO SPINDLE PCB
1 BIAS1 DV2 DV2 TRDRV FODRV 2 VIN1 3 VIN2 4 OPIN+ 5 OPINMUTE12 DV2 6 OPOUT 7 GND(PRE) 29 FIN
LDCNT 28 MUTE3 27 TRIN 26 BIAS2 25 LDIN 24 VIN3 23 PREVCC 22 FIN 30
IC8251
C0GBG0000044
MOTOR DRIVE IC
IC8251
8 VCC(CH1.2) 9 MUTE12
VCC(CH3.4) 21 MUTE4 20
10 GND(CH1.2) GND(CH3.4) 19 FP8501 26 25 T+ F+ FTP8251 TP8253 TP8254 TP8252 TP8502 TP8514 TP8515 TP8517 TP8516 TC8504 TC8503 TP8519 TP8518 TP8511 TP8520 LB8506 TP8510 C8504 TP8501 TC8501 TP8525 TP8524 TP8521 TC8502 TP8500 LB8501 R8501 ERJ3GEYJ222V 0 0.1 LB8505 LB8504 LB8503 J0JCC0000091 J0JCC0000091 ERJ3GEY0R00V D0GB152JA002 LB8514 ERJ3GEY0R00V LB8511 ERJ3GEY0R00V LB8513 ERJ3GEY0R00V LB8512 ERJ3GEY0R00V 11 VO212 VO2+ 13 VO114 VO1+ VO3- 18 VO3+ 17 VO4- 16 VO4+ 15 CP8252 CP8251
22
24 23 THFN 21 20 TA(DVD) TB(DVD) TD(DVD) TC(DVD)
19 18
TO OPTICAL PICKUP UNIT CIRCUIT ON SCHEMATIC DIAGRAM-1
FE2(DVD/CD) 17 FE1(DVD/CD) 16 GND 15 RF 14 VREF2(RF-) 13 PIN(DVD) 12 LDCD 11 LDGND 10 LDDVD 9 GND(OEIC) 8 VREF1 7 VCC 6 SUB2 5 SUB1 4 PIN(CD) 3 SUBSEL 2 GND(VRCD) 1
51
: DVD AUDIO SIGNAL LINE
DVD MODULE (IN/OUT) CIRCUIT
: +B SIGNAL LINE
: CD-DA SIGNAL LINE
R8271
0.39
DV2 DV2 DV2 DV2
DMIXOUT SBI3 SBO3 SBT3 STBDAC
CP8423
RA8271 (10K x 2)
DV2
FG MUTE3 SPDRV
DV2 DV2 DV2 DV2 DV2 PNRST ADAC-CLK SRCK LRCK CP8421 CP8422 R8451 0
VHALF C8261 0.1 C8288 0.1
DV2
DV2 DV2
DV2 DV2 DV2 C8274 0.1 C8272 6.3V33 C8251 6.3V220 C8253 0.1 LB8420 J0JCC0000091 C8453 10V10
ADOUT0 ADOUT1 ADOUT2
CP8424 CP8425 CP8426 C8456 0.1
C8455 0.1
C8271 16V47
C8273 0.1
L8420 G1C220KA0055 IC8111
C0CBCBD00018
POWER SUPPLY IC TP8111 C8112 1 VIN 8 NC 7 C8111 0.1
DV2
D+3.3V
1 VO 2 NC
IC8111
3 GND QR8571 C8113 470P 4 CN Cont 5 NC 6
UNR511V00L
SWTCH (SUPPLY CONTROL) TRSDRV R8251 6.8 CP8571 C8255 0.1 C8252 16V22 HFMON DV2 DV2
Q8550
QR8571
2SB1219AHL
SWITCH
C8254 0.1
D8571 MA2J72800L TP8523
Q8550
1 C8564 C8562 16V10
C8561 0.1 C8563 6.3V47 TP8522 R8565 2.2 R8563 1K R8564 10 R8550 7.5K R8560 1K R8569 12K C8550 6.3V33
R8567 51
R8566 56
RA8502 (56 x 4) VIN1 VIN2 VIN4 VIN3 RA8504 (56 x 2) VIN8 VIN7 RA8501 (56 x 2) CP8502 CP8501 RFINP RFINN LPC1
LB8507 J0JCC0000091 DV2 DV2 DV2 DV2
LB8502 J0JHC0000045 R8568 47K
Q8562 2SB09700RL
SWITCH Q8560
L8550 G1C100KA0055
Q8560
R8570 100K R8561 0
2SD1819A0L
SWITCH DV2 DV2 DV2 DV2 DV2 C8551 0.1 R8557 51 R8558 47K R8559 15K VREFH VIN6 VIN5 LPC2 RAM_CD DV2 DV2 DV2 DV2 DV2 C8503 0.1 C8502 0.1 C8501 10V10 AD0 DV2 R8562 330
Q8561 2SD1819A0L
SWITCH
C8506 100P
C8505 220P
R8556 56
Q8552 2SB09700RL
SWITCH
TP8512 R8555 2.2
R8554
22 R8551 0
Q8551 2SD1819A0L
SWITCH R8552 330
RA8503 (56 x 2)
52
C8554
C8553 6.3V47
TP8513 R8553 1K
C8552 16V10
: MAIN SIGNAL LINE : DVD AUDIO SIGNAL LINE : DVD VIDEO SIGNAL LINE
DVD MODULE (IN/OUT) CIRCUIT

C8423 0.1 C8424 0.1
: +B SIGNAL LINE
C8451 10V10
C8452 10V10
C8420 6.3V330 FP8101
36 35 34 33 32 31 30 29 28 27 26 25
DV2 DV2 VCC 24 AGND 23 VCC 22 AGND 21 DV2 DV2 DV2
Y/PY/G CB/PB/B CR/PR/R Y C
LB8303 LB8304 LB8305 LB8301 LB8302 K8421 LB8421 LB8422
J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119
TC8303 TC8304 TC8305 TC8301 TC8302 TC8421 TC8423 TC8424 TC8422 TC8425 TC8426 TC8427 TC8428 TC8429
37 RSTB 38 SCLKI 39 SCLKO 40 BCKIN 41 LRCIN 42 TEST 43 VDD 44 DGND 45 DIN1 46 DIN2 47 DIN3 48 ZFLGA
IC8451 C0FBBK000036
AUDIO DAC
VOUT8(NC) 20 AGND 19 VCC 18 AGND 17 VOUT7(NC) 16 VCOM 15 VOUT1 14 VOUT2 13 C8461 6.3V100
LB8451 LB8452
NC
5 6
NC
LB8453 LB8454 LB8455 TC8430 LB8456 LB8423 LB8424
8 9 10 11 12
R8420 2.2K
ERJ3GEY0R00V TC8431 J0JCC0000091 J0JCC0000119 TC8432
QR8420
QR8420 TC8491 DV2 AMUT LB8491
UNR521100L
AUDIO MUTING SWITCH
DV2 LB8690 J0JCC0000091
AUDIODIGITAL
FL8103 F1H0J1050022
TC8105
DV2
A+5V
FL8102 F1H0J1050022
TC8104 TC8103
C8462 0.1
DV2
D+1.2V
FL8101 F1H0J1050022
TC8102 TC8101 K8100 TC8108 TC8107 TC8691 TC8692 TC8693
VGND 1 Y/PY/G 2 VGND 3 CB/PB/B 4 VGND 5 CR/PR/R 6 VGND 7 Y 8 VGND 9 C 10 ADAC5V 11 MIX-L 12 ADAC5V 13 MIX-R 14 ADACGND 15 FL 16 ADACGND 17 FR 18 ADACGND 19 SL 20 ADACGND 21 SR 22 ADACGND 23 CNT 24 ADACGND 25 SW 26 A-REF 27 ZFLAG&AMUTE 28 DGND 29 AUDIODIGITAL 30 DGND 31 D+5V 32 DGND 33 D+5V 34 DGND 35 A+5V 36 AGND 37 A+5V 38 AGND 39 D+1.2V 40 DGND 41 D+1.2V 42 DGND 43 M+9V 44 MGND 45 M+9V 46 MGND 47 OP_CPU-CLK OP_CPU-CMD OP_CPU-STAT 48 49 50
AGND VCC VOUT5 VOUT4
ZERO8
DATA4
ZERO7
VOUT6
VOUT3
ZFLG1
ZFLG2
ZFLG3
ZFLG4
ZFLG5
ZFLG6
AGND
MDO
VCC
MDI
MC
NC
ML
TO MAIN (AUDIO-OUT1) CIRCUIT (PS4001) ON SCHEMATIC DIAGRAM-11
FL8104 F1J1E1040022
IC8691 C0JBCA000066
D8550 MA2S11100L AND GATE LOGIC IC 1 DV2 OP_CPU-CLK 2 3 GND 4 VCC 5 C8691 0.1
LB8691 LB8692 LB8693
D0GB101JA002 D0GB101JA002 D0GB101JA002
TC8000 TC8006
K8002 K8007
TC8002 TC8008
FOR F87GCS ONLY CP8561 LPCO2 DV2
DV2
OP_CPU-CMD
IC8695 C0JBCA000066
AND GATE LOGIC IC
TC8000 TC8000 TC8006
K8003 K8005 K8008 K8010
TC8003 TC8005 TC8009 TC8011
1 DV2 OP_CPU-STAT 2 3 GND CP8551 LPCO1 DV2
VCC 5 C8695 0.1
TC8006
FOR F87GN ONLY 4
53
21.3. (A) DVD Module (DV2) Circuit

SCHEMATIC DIAGRAM - 5 DVD MODULE (DV2) CIRCUIT
: +B SIGNAL LINE
IC8651 GCS: RFKFCF81J160 GN: RFKFCF81H160

FLASH ROM IC EXADT15 EXADT14 EXADT13 EXADT12 EXADT11 EXADT10 EXADT9 EXADT8 EXADR19 EXADR20 NEXWE IC8611 PNRST 1 A15 2 A14 3 A13 4 A12 5 A11 6 A10 7 A9 8 A8 9 A19 10 A20 11 XWE 12 XRESET 13 NC K8651 1 A0 2 A1 VCC 8 RA8611 (4.7K x 2) WP 7 C8611 0.1 CP8612 R8611 100 CP8611 SCL SDA EXADR18 EXADR17 EXADT7 CP8021 I/O I/O I/O I/O I/O STBDAC AMUT SBT3 SBO3 SBI3 CP8022 CP8023 R8021 CP8024 CP8025 CP8026 CP8027 CP8028 CP8029 CP8030 RA8021 (10K x 2) 10K SBT3 SBO3 SBI3 WIDE_L RGBH CLKSEL YC_H EXADT2 EXADT1 23 A2 24 A1 EXADT4 EXADT3 21 A4 22 A3 XOE 28 VSS 27 XCE 26 A0 25 EXADT0 STBDAC RSTCNT AMUT EXADT5 EXADT6 14 WP/ACC 15 RDY/XBSY 16 A18 17 A17 18 A7 19 A6 20 A5 DQ3 35 DQ10 34 DQ2 33 DQ9 32 DQ1 31 DQ8 30 DQ0 29 A16 48 XBYTE 47 VSS 46 DQ15/A-1 45 DQ7 44 DQ14 43 DQ6 42 DQ13 41 DQ5 40 DQ12 39 DQ4 38 VDD 37 DQ11 36 FDT11 FDT3 FDT10 FDT2 FDT9 FDT1 FDT8 FDT0 C8651 0.1 C8652 0.1 FDT15 FDT7 FDT14 FDT6 FDT13 FDT5 FDT12 FDT4 EXADR16
C3EBGC000055
EEPROM IC (NOT SUPPLIED)
IC8611
3 A2 4 GND SCL 6 SDA 5
I/O I/O I/O
OP_CPU-CLK OP_CPU-STAT OP_CPU-CMD
CP8031 CP8032 R8022 CP8033 R8241 22K 10K
CPU-CLK CPU-STAT CPU-CMD
I/O
TRSDRV
CP8242 C8241 0.1 CP8244
CP8241
DRV0
R8242 7.5K
CP8243
I/O
SPDRV C8242 0.1 CP8035
DRV1
M+9V/12VCTL HFMON
I/O I/O I/O I/O I/O I/O I/O
HFMON TRV-INNER-SW MUTE3 RAM_CD MUTE12 FG PNRST
R8023
47K TRV-I-SW MUTE3
CP8036
FGENB RAM_CD MUTE12 FG PNRST
C8031 0.1
54

: +B SIGNAL LINE
C8051 1 1 VDD MDQ0 C8052 0.1 2 DQ0 3 VDDQ MDQ1 MDQ2 4 DQ1 5 DQ2 6 VSSQ MDQ3 MDQ4 C8053 220P 9 VDDQ MDQ5 MDQ6 10 DQ5 11 DQ6 12 VSSQ MDQ7 C8054 1 13 DQ7 14 VDD DQM0 NWE NCAS NRAS NCSM BA0 BA1 MA10 MA0 MA1 MA2 MA3 C8055 1 15 LDQM 16 /WE 17 /CAS 18 /RAS 19 /CS 20 BA0 21 BA1 22 A10/AP 23 A0 24 A1 25 A2 26 A3 27 VDD VSSQ 46 7 DQ3 8 DQ4 VSS 54 DQ15 53 VSSQ 52 DQ14 51 DQ13 50 VDDQ 49 MDQ14 MDQ13 C8057 2200P MDQ15
C8028 1
C8027 0.1
C8026 1
C8024 2200P
C8023 1
C8025 0.1
C8022 0.1
RA8013 (82 x 4) MDQ5 MDQ12 MDQ11 MDQ10 MDQ4 MDQ11 RA8012 (82 x 4) MDQ3 MDQ10 MDQ9 MDQ12 MDQ2 MDQ13 RA8011 (82 x 4) MDQ1 MDQ8 MDQ14 MDQ0 MDQ15 C8004 0.1 C8003 2200P
DQ12 48 DQ11 47
DQ10 45 DQ9 44 C8056 0.1 VDDQ 43
IC8051
DQ8 42 VSS 41 NC 40
EXADR20 UDQM 39 CLK 38 CKE 37 EXADT12 NC 36 A11 35 A9 34 A8 33 A7 32 A6 31 A5 30 A4 29 VSS 28 MA11 MA9 MA8 MA7 MA6 EXADT1 MA5 MA4 EXADT5 EXADT9 EXADT13 EXADR17 EXADT6 EXADT2 IC8051 DQM1 CLK NEXWE EXADT0 EXADT4 EXADT8
C8005 0.1
C8006
0.1
C3ABPG000068
64MB SDRAM IC EXADR16 EXADR18 EXADT14 EXADT10
C8007 0.1
C8008 0.1
C8009 EXADR19 EXADT15 EXADT11
0.1
EXADT7 EXADT3 STBDAC RSTCNT AMUT SBT3 C8605 0.1 R8605 100K R8606 10K C8601 0.1 2
VDD
C8010 0.1
R8601 1K
SBO3 SBI3 SCL SDA WIDE_L
3
GND
1
OUT
Q8605 2SD1819A0L
SWITCH IC8605
Q8606 2SD1819A0L
SWITCH
3 VDD
IC8605
NC
C0EBA0000031
4 C8606 0.22
Cd
VOLTAGE DETECTING IC GND 1
IC8601 C0EBE0000384
RESET 2
C8011 1
RESET IC
55
PNRST
C8012 0.1
C8013 0.1

MA10 BA0 NWE NCAS NRAS CLK MA9 MA11 MA8 BA1 MA7 NCSM MDQ9 MDQ6 MDQ8 MDQ7 DQM1 DQM0
: +B SIGNAL LINE
FDT0
FDT1
FDT14 FDT2
FDT3
FDT4
FDT5
FDT6 VDD33 C8018 0.1
FDT9
FDT15
FDT13
FDT12
LB8011 ERJ3GEYJ220V
RA8018 (82 x 4) RA8017 (82 x 4)

RA8016 (82 x 4) 0.1
R8011
RA8014 (82 x 4) RA8015 (22 x 2)
256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193
VSS VSS VSS VSS MDQ7 VSS MA2 VSS VSS VSS MA3 VSS MDQ16 NWE NCAS NRAS MCKI MCK MA9 MA8 MA7 MA0 MA6 MA1 MA5 NCSM MA11 VDD33 VDD12 VDD33 VDD33 VDD33 MDQ6 MDQ8 DQM1 DQM0 MA10 VDD33 MA4 VDD12 DQM2 DQM3 VDD33 VSS VDD33 MDQ31 MDQ17 MDQ30 MDQ18 MDQ29 MDQ19 MDQ28 VDD33 VSS BA0 BA1 MDQ20 MDQ27 MDQ21 MDQ26 MDQ22 MDQ25 MDQ23
1 MDQ9 2 MDQ5 3 VSS 4 MDQ10 5 MDQ4 6 VDD33 7 MDQ11 8 MDQ3 9 VSS 10 MDQ12 11 MDQ2 12 VDD33 13 MDQ13 14 MDQ1 15 MDQ14 16 VSS 17 MDQ0 18 MDQ15 19 VDD33 20 VSS 21 EXADR20 22 NEXWE 23 EXADT0 24 EXADT4 25 EXADT8 26 VDD12 27 EXADT12 28 VDD33 29 VSS 30 EXADR16 31 EXADR18 32 EXADT14 33 EXADT10 34 VDD33 35 VSS 36 EXADT6 37 EXADT2 38 NEXCE 39 EXADT1 40 EXADT5 41 EXADT9 42 EXADT13 43 EXADR17 44 VDD12 45 EXADR19 46 EXADT15 47 EXADT11 48 VDD33 49 VSS 50 EXADT7 51 EXADT3 52 NEXOE 53 P15 54 P14 55 P13 56 P12 57 P11 58 P10 59 P9 60 P8 61 P7 62 VDD33 64 VSS
AVDDD PLFIL1 AVSSD VDD33 VDD12 MONI7 MONI6 MONI5 MONI4 MONI3 MONI2 MONI1 MONI0 NRST DRV0 DRV1 DRV2 DRV3 DRV4 DRV5 DRV6 DRV7 DRV8 VSS VSS VSS P16 P17 FG P6 P5 P4 P3 P2 P1 P0 ANAMONI1 ANAMONI2
C8020
C8019
C8021 0.1
FDT10
FDT11
FDT7
MA0
MA6
MA1
MA5
MA2
MA4
MA3
MDQ24 192 VSS 191 VDD33 190 TRCST 189 TRCDATA3 188 TRCDATA2 187 TRCDATA1 186 TRCDATA0 185 TRCCLK 184 EXTRG1 183 SDATA 182 EXTRG0 181 SCLOCK 180 VSS 179 VDD33 178 IECOUT 177 ADOUT0 176 ADOUT1 175 ADOUT2 174 VSS 173 VDD12 172 ADOUT3 171 SRCK 170 LRCK 169 EXTCK 168 VDD33 167 OSCO 166 OSCI 165 VSS 164 DACCK 163 AVSSG 162 AVDDG 161 AVSSE 160 AVDDE 159 DAC5OUT 158 AVSSF 157 DAC4OUT 156 COMP 155 IREF1 154 VREF 153 DAC3OUT 152 DAC2OUT 151 AVDDF 150 DAC1OUT 149 PWM0 148 PWM1 147 VCOF/AD4 146 AVSSH 145 VREFH10 144 AD0 143 VREFL10 142 AVDDH 141 AD1 140 AD2 139 VIN1 138 VIN2 137 VIN3 136 VIN4 135 VIN5 134 VIN6 133 VIN7 132 VIN8 131 VIN9 130
VREFM5 VREFH5 VREFL5 VIN6RF VIN5RF VIN4RF VIN3RF VIN2RF VIN1RF
IC8001 MN2DS0003APH
DV2.1 LSI
63 MMOD
VREFM7 VREFH7 VREFL7 CCAPA CDATA AVDDC AVSSC
VIN10 129
LPC02 VREFH VREFH LPC02 AVSSB LPC1 VHALF VHALF LPC01 LPC2
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
0.1 0.1 0.1 TP8219 TP8218 TP8217 TP8216 TP8215 TP8214 TP8213 C8203 0.1 CP8002 5600P CP8003 TP8211 0.1 0.1 0.1 C8205 C8225
TP8220
TP8212
0.033
0.018
AVDDB
RFINN
RFINP
0.1 C8226
0.1
0.1
0.1
M+9/12VCTL
0.1
VIN4 C8221 VIN3 C8222
VIN2 C8223 VIN1 C8224
CPU-CLK CPU-STAT
CPU-CMD YC_H
TRV-I-SW RAM_CD
MUTE12
CLKSEL
CP8001
KMODE
HFMON
C8227
0.1
C8211
C8212
C8213
C8214
FGENB
MUTE3
PNRST
C8215
C8216
C8204
LPC01
RFINN
RFINP
RGBH
DRV0
DRV1
LPC1
FG
C8207 0.1
56
LPC2
C8229 1
: CD-DA SIGNAL LINE : DVD VIDEO SIGNAL LINE : DVD AUDIO SIGNAL LINE
DVD MODULE (DV2) CIRCUIT

FDT8
: +B SIGNAL LINE
LB8001 J0JHC0000045 D+3.3V D+1.2V C8002 4V330 C8001 6.3V100 LB8002 J0JHC0000045 I/O I/O
TL8031 TL8032 TL8033 TL8034 TL8035
FP8031 DGND SDATA 1 2
C8017 0.1 CP8047 CP8046 CP8045 CP8044 CP8043 CP8041 CP8040 R8041 33
RA8031 (4.7K x 2) RA8032 (4.7K x 2) CP8034 KMODE
TL8037 PNRST TL8038
KMODE 3 EXTRG0 4 DGND 5 SCLOCK 6 DGND 7 NRESET 8 VDD 9 VDD 10
TO FLASH ROM WRITING CIRCUIT
C8016 1 R8404 R8403 100 100 AUDIODIGITAL ADOUT0 ADOUT1 C8015 1 R8402 100 ADOUT2 RA8402 (100 x 2) DMIXOUT SRCK R8401 C8014 47K 0.1 LRCK RA8401 (100 x 2) R8621 1M LB8401 D0GB151JA008 ADAC-CLK C8400 15P C8304 1 R8341 82 I/O R8622 470 I/O I/O I/O C8622 5P R8321 160 C8621 39P R8322 10 K8341 I/O I/O I/O I/O C8301 6.3V220 K8325 C8302 6.3V33
L8302 J0JCC0000079
L8301 G1C100KA0055
C R8325 160 R8326 10 K8321 Y
I/O
I/O
X8621 H0J270500064
C8307
0.1
CR/PR/R
I/O
C8312
R8315
6.8 R8313 24K R8314 0 R8312 R8311 1K 2.4K R8335 82
K8335 CB/PB/B I/O
C8303
0.1 CP8235 C8235 1000P R8235 8.2K
C8311
0.1 K8331 Y/PY/G FODRV I/O R8331 160 R8332 10 TRDRV I/O I/O
C8208
0.1
C8236 1000P R8236 8.2K C8238 820P CP8234
C8234 0.1
CP8236 C8237 1000P
C8232
0.1
CP8233 VIN1 VIN2 VIN3 VIN4 VIN5 VIN6 VIN7 VIN8 VIN5 VIN6 CP8231 C8233 4700P
R8233 15K AD0 I/O VIN1 VIN2 VIN3 VIN4 VIN5 VIN6 VIN7 VIN8 R8232 10K L8202 J0JCC0000079 L8201 G1C100K00020 VHALF VREFH LPC02 LPC2 LPC01 LPC1 RFINP C8218 1 CP8202 CP8201 C8217 1 TP8201 CP8204 CP8203 VIN1 VIN2 VIN3 VIN4 VIN5 VIN6 VIN7 VIN8 VHALF VREFH LPC02 LPC2 LPC01 LPC1 RFINP RFINN I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O
C8228 1
C8201 6.3V100
C8202 6.3V100
C8206 1
RFINN
57
21.4. (B) Main (Operation Control) Circuit

SCHEMATIC DIAGRAM - 9 MAIN (OPERATION CONTROL) CIRCUIT
: +B SIGNAL LINE
R6094 10K R6095 10K AO1 NPOFF_L
AO1
POWER_MUTE
VO
WIDE1
R6093 10K PW NSW+5V R6092 10K
K6091
RGBH
VO
60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41
POWER-MUTE FL_RESET_L OFFMUTE NPOFF_L LONG-F LONG-R COMPH RGBH WIDE-1 HDCDH TRAY-F TRAY-R IPSEL P63 P62 P61 P60 P46 P45 P44
61 P64 62 P65 63 P66 64 P67 65 P70 66 P71 67 P72 68 P73 69 P74 70 P75 71 P76 72 P77 73 P87 74 P86 75 P85 76 P84 77 P83 78 P82 79 P81
YCH 40 P33 39 P32 38 P31 37 P30 36 SINGLE-MODE_L 35 PULSE-SENSOR 34 POSITION 33 OPEN-SW 32 CAM-SENSOR 31 P14 30 P13 29 PWM 28 P11 27 P10 26 RST 25 P06 24 FL-DSPCLK 23 FL-STAT 22 FL-CMD 21 C6012 0.1 R6074 R6075 4.7K 100K R6072 R6073 22K 22K
IC6001 MN101C28DHA
8 BIT MICROCONTROLLER
R6012 330
R6011 47K 1 OUT GND 2 IN 3 C6011 6.3V220
SYS-CMD SYS-STAT
80 P80
VREF+ MMOD VREFOSC2 OSC1
SYS-DSPCLK
IC6011 C0EBE0000106
RESET IC
VDD
VSS XI
AN0 AN1
AN2
AN3 AN4
AN5
AN6
AN7
3 4
9 10 11 12 13 14 15 16 17 18 19 20 CP6001
XO
R6077 2.7K
C6001 6.3V220 1 2 3
C6002 0.1
R6076 39K
X6001 H2D800400009
10K
10K
10K
AO1 AO1 AO1
CMD STATUS DSPCLK C6042 330P C6041 330P
R6021
R6022
R6024 0
R6025 0
R6026 GCS: 3K GN: 1.8K
R6023
58
SCHEMATIC DIAGRAM - 10 MAIN (OPERATION CONTROL) CIRCUIT

IC6062 C0GAG0000007
CHANGER MOTOR DRIVER IC
VREF OUT1 OUT2 GND VCC RNF R-IN F-IN VM
: +B SIGNAL LINE : -B SIGNAL LINE
6
K6066
D6065
CN6002 TRAY-MOTOR- 11 TRAY-MOTOR+ 10 GND 9 LB6067 LB6066 LB6065 LB6064 J0JBC0000015 J0JBC0000015 J0JBC0000015 J0JBC0000015 PHT-DRV 8 GND 7 DISCSENSOR 6 GND 5 PULSE-SENSOR 4 GND 3 POSITN-SENS 2 GND 1
D6064
C6064 0.1
C6063 25V47
R6068 4.7K
R6067 330
D6064, D6065 B0EAKL00031
R6070 150
R6071 120
TO SENSOR CIRCUIT (CN9102) ON SCHEMATIC DIAGRAM-19
QR6062 UNR221100L
SWITCH R6069 10K
IC6061 C0GAG0000007
CHANGER MOTOR DRIVER IC
OUT1 OUT2 VREF GND VCC R-IN RNF F-IN VM
6
K6063
CN6003 DGND D6061, D6062 B0EAKL00031 11 LDNG-MOTOR- 10 DGND 9 LDNG-MOTOR+ LB6063 R6064 330 R6065 330 LB6062 LB6061 J0JBC0000015 J0JBC0000015 J0JBC0000015 8 DGND 7 CAM-SENSOR 6 DGND 5 PHT-DRV 4 DGND 3 OPEN-SW 2 DGND 1
D6062
C6062 0.1
C6061 25V47
R6062 4.7K
R6061 330
TO LOADING MOTOR CIRCUIT (CN9003) ON SCHEMATIC DIAGRAM-19
D6061
R6063 10K
ZA6001 K4CZ01000027 RC+9V PW
QR6061 UNR221100L
SWITCH
CN6004 PW PW PW FLHFLH+ FL-2*V FLHFLH+ 11 10 FL-2*V 9 FL_RESET 8 NSW+5V 7 PANE_CMD 6 NSW+5V 5 PANE_STAT 4 DGND 3 PANE_DSPCLK 2 DGND 1
TO PANEL CIRCUIT (FP6501) ON SCHEMATIC DIAGRAM-17
59
21.5. (B) Main (Audio- out 1) Circuit

SCHEMATIC DIAGRAM - 11 MAIN (AUDIO-OUT1) CIRCUIT
: +B SIGNAL LINE : -B SIGNAL LINE : DVD AUDIO SIGNAL LINE : DVD VIDEO SIGNAL LINE : MAIN SIGNAL LINE
R4313 22K
D4301 MAZ40560HF
QR4302 XN0431100L
R4304 3.3K MUTING CONTROL 3 2 K4912 PS4001 50 VGND 49 PY/Y/G 48 VGND 47 PB/CB/B 46 VGND 45 PR/CR/R VGND 44 Y 43 42 VGND 41 40 39 38 37 36 C ADAC5V MIXL ADAC5V MIXR ADACGND K4905 K4906 R4326 R4327 R4337 R4338 R4339 R4335 7.5K 7.5K 7.5K 7.5K 7.5K 7.5K K4903 K4904 R4331 R4332 7.5K 7.5K R4306 3.3K PY/Y/G PB/CB/B PR/CR/R Y C VO VO VO VO POWER_MUTE VO OP TL4303 R4305 3.3K 1 6 4 C4313 0.1 5 TL4301 MUTE AO2/VO
Q4302 2SD0601AHL
SWITCH
R4362 10K
TO DVD MODULE (IN/OUT) CIRCUIT (FP8101) ON SCHEMATIC DIAGRAM-4
35 FL ADACGND 34 FR 33 ADACGND 32 SL 31 ADACGND 30 29 SR 28 ADACGND 27 CNT 26 ADACGND SW 25 VREF 24 23 ZFLAG&AMUTE 22 21 19 DGND AUDIODIGITAL
C4341 0.1 ADIGITAL D+5V AO2 PW/AO2
C4340 50V220
20 DGND D+5V
18 DGND D+5V 17 DGND 16 A+5V 15 AGND 14 A+5V 13 AGND 12 D+1.2V 11 DGND 10 D+1.2V 9 DGND 8 M+9V 7 MGND 6 M+9V 5 4 MGND 3 2 1 DSPCLK CMD STATUS
L4301 G0C391JA0019 C4302 0.1 C4312 10V1000
A+5V D+1.2V
PW/VO PW
M+9V
PW
DSPCLK CMD STATUS
OP OP OP
PW
NSW+10/+12V
K4901
TL4901
QR4901 XN0431100L
SWITCH R4902 330
PW
NPOFF_L R4903 330 3 2 1
QR4902 XN0431100L
4 K4902 PW NSW-10/-12V TL4902 5 6 SWITCH
60
SCHEMATIC DIAGRAM - 12 MAIN (AUDIO-OUT1) CIRCUIT

R4301 1.5K
: MAIN SIGNAL LINE
R4355 15K MIXLOUT C4336 82P 4 C4315 0.1 IC4301 3 2 1 AO2
IC4301
C4339 0.1 5 6 7 8
C0ABBB000118
DUAL OP AMP IC
C4337 82P R4356
MIXROUT 15K R4347 C4334 82P 1 15K FLOUT
AO2
AO2
4 C4317 0.1
IC4302
IC4302
C0ABBB000118
DUAL OP AMP IC
C4335 82P FROUT R4348 15K R4349 C4331 82P 1 27K SLOUT 4 K4911 C4319 0.1 IC4303 3 2 AO2 AO2
IC4303
C0ABBB000118
DUAL OP AMP IC
5 C4332 82P
8 SROUT R4350 R4351 27K 27K CNTOUT AO2 AO2
C4333 82P 5 6 7 8
IC4304
IC4304
C4321 0.1 4 3 2 1
C0ABBB000118
DUAL OP AMP IC
C4338 68P SWOUT AO2
R4357 47K
Q4901 B1BACD000011
SWITCH
C4323 50V220
C4314 0.1
C4316 0.1
C4318 0.1
C4320 0.1
C4924 50V220
C4934 50V220
Q4911 B1BCCD000013
SWITCH
C4324 50V220
61
21.6. (B) Main (Audio- out 2) Circuit

: MAIN SIGNAL LINE : DVD AUDIO SIGNAL LINE : DVD VIDEO SIGNAL LINE
MAIN (AUDIO-OUT2) CIRCUIT
: +B SIGNAL LINE
C4414 25V47 AO1 MIXLOUT R4422 47K
R4428 820 R4448 820
R4459 220
Q4419
C4427 1000P ZA4753 K4CZ01000027
R4454 820 C4415 25V47 AO1 MIXROUT R4423 47K R4429 820
Q4410
C4423 1000P R4460 220 C4589 0.1 C4588 0.1
Q4410,Q4419
2SD0601AHL
MUTING SWITCH
JK4501 K2YZ12000011 VO VO YOUT COUT Y C 24 25 22 C4432 0.1 21 D_GND4 Y VOUT D_GND3 VO VO PB PR PB PR D_GND2 MIX_L 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 23
AO1
MUTE Q4413,Q4414 C4416 25V47 R4439 820 VO R4463 220 VO PY/Y VOUT
2SD0601AHL
MUTING SWITCH R4446 820
AO1
FLOUT
Q4413
C4430 1000P
R4427 47K
R4447 820 C4417 25V47 AO1 FROUT C4419 25V47 AO1 SLOUT R4434 47K R4450 820 R4441 820 R4424 47K R4440 820
Q4414
C4429 1000P R4467 220 R4464 220
MIX_R A_GND4 FL FR A_GND3 SL SR A_GND2 CNT SW
Q4415
C4424 1000P
C4420 25V47 AO1 SROUT
R4435 47K R4443 820
R4451 820
Q4416
C4425 1000P R4465 220 C4431 0.1
A_GND1
Q4415,Q4416 C4421 25V47 AO1 CNTOUT R4432 47K R4452 820
2SD0601AHL
R4444 820 MUTING SWITCH R4461 220
Q4417
C4428 1000P Q4417,Q4418
2SD0601AHL
MUTING SWITCH
R4453 820 C4422 25V47 AO1 SWOUT R4433 47K R4442 820
Q4418
C4426 1000P R4462 220 C4586 0.1 C4587 0.1
AO1
D+5V R4512 1K C4511 0.1 C4514 6.3V47 ZA4752 K4CZ01000027
R4511 1K AO1 ADIGITAL
C4512 25V47
Q4511
R4515 75 C4513 25V47 LB4511 ERJ3GEY0R00V JK4502 DIGITAL AUDIO OUT COAXIAL
Q4511
2SC22950XL
SWITCH R4513 1K R4514 220
2 1
R4516 10K C4403 0.1
ZA4751 K4CZ01000027
62
21.7. (B) Main (Video Out) Circuit

SCHEMATIC DIAGRAM - 14 MAIN (VIDEO OUT) CIRCUIT
OP WIDE1
: +B SIGNAL LINE
: DVD VIDEO SIGNAL LINE
R3532 R3531 R3533
75 75 75
LB3532 LB3531 LB3533
J0JBC0000015 J0JBC0000015 J0JBC0000015
COUT VOUT YOUT
AO2 AO2 AO2
R3542 10K
R3534 R3535 R3536
75 75 75
LB3534 LB3535 LB3536
J0JCC0000186 J0JBC0000015 J0JBC0000015
PY/Y PB PR
AO2 AO2 AO2
QR3541 UNR221200L
SWITCH R3541 2.2K C3531 0.01 C3517 6.3V1000 C3519 6.3V1000 C3521 6.3V1000 C3523 6.3V330 C3524 6.3V330
K3506
K3507
34
VCC2
33
COUT
32
GND2
K3508
31
VOUT
30
VSAG
29
GND2
28
YOUT
27
YSAG
26
GND2
25
CYOUT
24
CYSAG
23
GND2
22
CBOUT
21
CBSAG
20
GND2
19
CROUT
18
CRSAG
IC3501 C9ZB00000431
YC-MIX MUTE1 MUTE2
K3531
GND2 CDIN CRIN CYIN
VIDEO SELECTOR IC
GND1 GND1 BIAS CLP YIN NC NC
VCC1
CIN
VIN
10
11
12
13
14
15
16
17
C3503 0.01
C3502 0.01
C3504 0.1
C3505 50V22
C3501 6.3V220
C3507 0.1
C3516 0.01
L3501 G0C220JA0019 C3511 1 C3512 1
AO1 AO1
C A+5V
AO1 AO1
Y K3505 PY/Y/G
K3504 AO1 PR/CR/R
K3503 AO1 PB/CB/B
OP
RGBH
63
21.8. (B) Main (Power) Circuit

SCHEMATIC DIAGRAM - 15 MAIN (POWER) CIRCUIT
ZA1011 VMC1359
K1001 AC IN GCS: 220-240V, 50/60Hz GN: 220-240V, 50Hz P1001 TC1001 K1002 K1003 C1001 0.1 F1001 125V/250V 1.6A
ZA1001 EYF52BC
C1003 1000P
TC1002
T1021 ETS28AV1K6AC D1011 B0EDKT000002 4 1 C1011 350V22 3 2 C1031 3300P R1031 68K 2 3 4 5 6 7 8 D1031 B0HADV000001 9 20 19 18 17 16 15 14 13 12 11
R1002 470K D1002 ERZVA5Z471 TC1007 R1001 470K TC1005
L1001 ELF15N003A 4 1 3 C1002 0.1 2
K1004
ZA1002 EYF52BC
TC1004
IC1021 C0DACZH00007
POWER SUPPLY IC C1021 1200P 5 D 2 F/B
D1051 MAZ41000MF
D1045 MAZ42000LF R1046 10
Q1045 2SC3311ASA
REGULATOR R1045 27K
TC1006
R1041 68
D1041 B0HAGM000006
C1004 2200
VCC 4 Z/C 1 GND 3
R1062 27K C1061 680P C1041 50V47
R1061 2.7K
C1051 330P
R1051 15
D1072 MA2C16500E R1071 33 C1071 0.047
C1045 25V47
D1071 MAZ41000LF D1081 MA2C18500E D1084 MAZ41600LF R1085 100K Q1081, Q1082 R1081 12 R1082 82
2SC3311ASA
REGULATOR
Q1082 Q1081
C1083 50V100 C1082 0.1
R1083 30
D1083 D1082 MAZ41000HF MA2C16500E
R1084 22K
C1081 1200P
PHOTO COUPLER (VOLTAGE CONTROLLER) 4 3 1 2
Q1051 B3PBA0000104
64
SCHEMATIC DIAGRAM - 16 MAIN (POWER) CIRCUIT

D1171 B0JAME000037
K1172
TP1116 FLH+ OP
PR1171 B1ZAZ0000030 N25
C1171 10V100 TP1115 FLHD1173 MAZ41800MF R1162 470 L1161 G0C101JA0019 R1163 470 R1164 470 R1165 470 TP1114 OP
D1161 B0HAGM000006 C1161 50V22
K1161
K1162
FL-2*V
OP
IC1151 C0DBZHG00017
POWER SUPPLY IC 1 IN OUT 3 NC 4 C1154 16V220 TP1110 RC+9V OP
C1157 0.1
C1156 0.1
2 ON/OFF GND 5
L1151 G0A220G00018 C1153 25V330 D1152 B0JAML000009 D1151 B0JAML000009
IC1155 C0DBZHG00017
K1153 K1154 K1155 POWER SUPPLY IC 1 IN 2 ON/OFF GND 5 OUT 3 NC 4 C1155 16V220 TP1108 TP1107 M+9V AO1
Q1115 B1DDCC000009
REGULATOR L1111 G0A100H00014
D1111 B0JAMG000013
Q1115
4 5 R1115 100K C1115 0.1 6 3 2 1 L1117 ELELN100KA TP1103 D+5V TP1105 A+5V C1116 10V220 R1116 1K C1117 6.3V1000 TP1106 AO1 AO1
QR1115 UNR221300L
SWITCH (POWER ON/OFF)
TP1117
Q1126 XN0150100L
REGULATOR D1121 B0JAMG000013 C1121 6.3V1000
NPOFF_L
AO1
Q1125 2SB14170JA
SWITCH
K1121 R1125 100 R1126 3.6K D1125 MA2J11100L 5 4 3 R1127 1.3K C1125 0.1 R1128 120 2
Q1125 Q1126
1 C1126 1000P
TP1101 D+1.2V AO1
TP1102 DGND C1127 6.3V1000 OP/AO
ZA1111 K4CZ01000027
L1131 G0C330KA0004 D1141 B0JAML000009 C1151 25V330 R1105 1K C1111 10V1000 R1104 330 C1112 10V1000 C1102 0.056 R1107 2.2K R1101 75 R1102 12 C1141 25V100 K1112 C1101 0.1 L1141 G0C330KA0004
TP1112 TP1111 NSW+10/+12V AO1
TP1113 NSW-10/-12V AO1
TP1109 NSW+5V OP
1 K
R1106 100 R
IC1101 C0DAEMZ00001
VOLTAGE REGULATOR IC A 2
3 R1103 12
65
21.9. (C) Panel Circuit, (D) Display Panel Circuit & (E) Selection Panel Circuit
SCHEMATIC DIAGRAM - 17 PANEL CIRCUIT
QR6591~QR6597
UNR511F00L
LED DRIVER
C6571 50V10n
FP6501 11 DGND PANE_DSPCLK DGND PANE_STAT NSW+5V PANE_CMD NSW+5V FL_RESET FL-22V FL+ FL10 9 8 7 6 5 4 3 2 1
QR6597
TC6511 TC6510 TC6509 TC6508 TC6507
CP6008
QR6596
K6591
TO MAIN (OPERATION CONTROL) CIRCUIT (CN6004) ON SCHEMATIC DIAGRAM-10
QR6595
QR6594
CP6007
TC6504 TC6503 TC6502 TC6501 C6503 35V10
P1
P2
P3
P4
P5
P6
P7 SEG9
C6501 6.3V47
DISC4 VPP
SBI1
SBO1
SEG15
SEG14
SEG13
SEG12
SEG11
CDMODE
SEG10
DISC5
SEG8
SBT1
P06
C6502 0.1
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
P8
C6504 50V10n
CP6009
CP6006
TC6506 TC6505
S6511 (O/C)
C6511 C6521
10n 10n
R6510 R6520
10K 10K
1 VREF2 AN1 3 AN2 4 AN3 5 AN4 6 AN5 7 VREF+ 8 VDD 9 OSC2 10 OSC1 11 VSS 12 XI 13 XO 14 MMOD 15 XRST 16 P10
SEG7 48 SEG6 47 DGT2 46 DGT3 45 DGT4 44 DGT5 43
P9 P10 P11 P12 P13 P14 P15 9G 8G 7G 6G 5G 4G 3G 2G 1G
C6531 S6521 (DISC_EX)
10n
R6530
10K
1 2 R6521 820 3 X6501 H2D800400009 S6522 (DISC_SKIP)
IC6501 MN101C07AHB
PANEL MICON IC
DGT6 42 DGT7 41 P40/DGT8 40 P41/DGT9 39 P60/DGT10 38 P61/DGT11 37 P62/DGT12 36 P63/DGT13 35 P64/DGT14 34 P65/DGT15 33
CP6001
TM2IO/P12
TM3IO/P13
IRQ0/P20
IRQ1/P21
IRQ2/P22 IRQ3/P23
IRQ4/P24
DISC3
DISC2
DISC1
C6508 0.1
P11
TM4IO/P14
P53
P54
P67
R6522 1K
S6523 (F-SKIP) S6524 (R-SKIP)
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
P66
R6523 1.2K
CP6005 CP6004 CP6002 CP6003
S6531 (STOP)
IC6551 B3RAD0000035
INFRA RED RAY IC
R6531 820
S6532 (PAUSE)
GND
VCC
R6532 1K
FOUT
S6533 (PLAY)
R6571 8.2K
3 R6552 22 R6551 22
Q6571 2SD132800L
SWITCH
R6572 100K
C6551 6.3V47
66
SCHEMATIC DIAGRAM - 18 PANEL CIRCUIT

TC6521 TC6522 TC6523 TC6524 TC6525 TC6526 TC6527 TC6528 TC6529 KEY-1 STAND-BY CD-MODE DISC5 DISC4 DISC3 DISC2 DISC1 DGND FC6601A 1 2 3 4 5 6 7 8 9 1 KEY-1
DISPLAY PANEL CIRCUIT

TC6601 TC6602 TC6603 TC6604 TC6605 TC6606 TC6607 TC6608 TC6609 D6641~D6646 B3ABA0000397 D6647 B3AAA0000534 R6641 220 D6641 R6642 220 D6642 R6643 220 D6643 R6644 220 D6644 R6645 220 D6645 R6646 220 D6646 R6647 220 D6647 2 STAND-BY CD-MODE 3 DISC5 4 DISC4 5 DISC3 6 7 DISC2 DISC1 8 DGND 9 FC6601B
DISC1 DISC2 DISC3 DISC4 DISC5 CD_MODE STANDBY (GREEN) (GREEN) (GREEN) (GREEN) (GREEN) (GREEN) (RED) DP6501 A2BB00000124 TC6572 FNX(F-) NP NX(9G) NX NX NX NX NX S6616 (DISC5) S6615 (DISC4) S6614 (DISC3) S6613 (DISC2) S6612 (DISC1) S6618 (DPLII) S6617 (CD_ MODE) S6611 (POWER) R6616 2.2K R6615 1.8K R6617 3.3K R6618 1 2 3 4 5 6 7 8 9G TC6573 9 R6614 1.5K R6613 1.2K R6612 1K 4.7K R6611 820
QR6593
QR6592
QR6591
10 9G 11 NX(NC) 12 NX(8G) 13 P1 14 P2 15 8G 16 P3 17 NX(7G) 18 P4 19 7G 20 P5 21 NX(6G) 22 6G 23 P6 24 NX(5G) 25 P7 26 5G 27 P8 28 NX(4G) 29 4G 30 P9 31 NX(3G) 32 P10 33 3G 34 P11 35 NX(2G) 36 P12 37 2G 38 NX(1G) 39 P13 40 P14 41 P15 42 1G 43 NP 44 NX(F+) 45 F+
P1 P2 8G P3 P4 7G P5 6G P6 P7 5G P8 4G P9 P10 3G P11 P12 2G P13 P14 P15 1G
TC6574 TC6575 TC6576 TC6577 TC6578 TC6579 TC6580 TC6581 TC6582 TC6583 TC6584 TC6585 TC6586 TC6587 TC6588 TC6589 TC6590 TC6591 TC6592 TC6593 TC6594 TC6595 TC6596
R6573 R6574 R6575 R6576 R6577 R6578
47K 47K 47K 47K 47K 47K
TC6571
SELECTION PANEL CIRCUIT

R6721 1.5K R6722 1.8K R6723 2.2K R6724 3.3K R6725 4.7K R6726 6.8K
FC6701A TC6531 TC6532 TC6533 KEY2 DGND KEY3 1 2 3 1
FC6701B KEY2 TC6701 TC6702 TC6703
S6721 [10]
S6722 [5]
S6723 [4]
S6724 [3]
S6725 [2]
S6726 [1]
DGND 2 3 KEY3
S6731 [CANCEL] R6731 1.2K
S6732 [0] R6732 1.5K
S6733 [9] R6733 1.8K
S6734 [8] R6734 2.2K
S6735 [7] R6735 3.3K
S6736 [6] R6736 4.7K
67
21.10. (F) Sensor Circuit, (G) Tray Motor Circuit & (H) Loading Motor Circuit
SENSOR CIRCUIT
Q9103 CN9102 11 TRAYMOTORTRAYMOTOR+ DGND PHOTO_DRV/B DGND DISC_SENSE DGND PULSE_SENSE DGND POSITION_SENSE DGND 10 9 8 7 6 5 4 3 2 1
TRAY MOTOR CIRCUIT

M9101 (TRAY MOTOR) FC9101 TRAYMOTORTRAYMOTOR+ PHOTO_DRV/A DGND PULSE_SENSE 1 2 3 4 5 6 1 2 3 4 5 6 TRAYMOTORTRAYMOTOR+ PHOTO_DRV/A DGND PULSE_SENSE POSITION_SENSE 3 4 Q9102
B3NAB0000027
PHOTO REFLECTOR
M
Q9102
1 2
Q9103
POSITION_SENSE
B3NAA0000011
PHOTO INTERRUPTOR Q9101 3 4
Q9101
1 2
B3NAA0000078
POSITION SENSOR
LOADING MOTOR CIRCUIT

CN9003 DGND 11 10 LOADINGMOTOR+ DGND 9 LOADINGMOTOR8 DGND 7 CAM-SENSOR 6 5 DGND 4 PHOTO-DRV/C S9001 LOADING 4 3 DGND 3 LOADING_SW 2 DGND 1 M9001 LOADING MOTOR Q9001
B3NAA0000068
CAM SENSOR
Q9001
1 2
68
22 Printed Circuit Board

22.1. (A) DVD Module P.C.B. (Side: A & B)
A 1
DVD MODULE P.C.B (REP3654B...GN) (REP3654C...GCS)

TP8254
28
30
15
2
IC8251
R8570 R8569 1 C8261 29 C8253 14
LB8511
LB8505
LB8504
TP8252 C8501
C8506
TC8002
TC8001
TC8003
C8223
CP8202
CP8571 CP8243 R8242
TP8217 TP8219
C8241
R8550
R8561 R8551 R8233 R8235 R8236 C8233 C8234 C8232
R8552
C8229
C8226
C8205
C8204
C8203
CP8027 CP8028
CP8029
R8311
C8311
R8312
R8232
C8238 C8237 C8236
CP8561 TP8201
CP8032 CP8031
CP8611
CP8551
CP8033
CP8233
C8207 TP8220 TP8211 TP8218 TP8212 C8012 TP8213 TP8215 C8013 TP8216 TP8214
CP8612
CP8023
LB8303 K8331
R8331
R8335
K8335
CP8236 K8341 CP8235

R8341
K8651
C8235
CP8022
CP8021
CP8203 CP8204 CP8234 CP8231
128 129
65 64
TC8000
CP8030 C8242 CP8241 CP8001
R8241
K8002
K8003
K8005
Q8550
R8562
C8227
TP8512
C8225
Q8561
C8224
C8222
C8221
R8560
TP8522
Q8551
CP8201
C8218
LB8507
C8217
TP8523
QR8571
CP8036
TC8004
LB8305 LB8301
K8321
TC8303 FP8101 TC8304 1 TC8305
R8332
24
LB8304
R8315 C8312
R8321 R8322 R8326
LB8302
K8325
C8400
10 15 20 25
TC8302
5
TC8301
IC8001
LB8401
TC8421 TC8423 TC8424 TC8425 TC8428 TC8429 TC8432
R8325
IC8651
R8401
TC8427 TC8422 TC8426 TC8431 RA8401 TC8105 FL8103 FL8102

R8402 R8403 R8404
25
RA8402 C8652 RA8011
RA8012
30 35 40 45 50
TC8103 TC8104 TC8101 FL8101

LB8691
CP8040
192 193
R8041 C8018 C8024 C8019
1 256
C8023 C8022 RA8018
CP8043 C8025
TC8491 TC8108 TC8102
C8020 C8021
LB8011
C8026 R8011
C8027
C8028 RA8013 RA8014
RA8031
CP8047 CP8045
RA8016
LB8692
LB8693
TC8691
RA8017
FL8104
TC8107
TL8035
TL8034
CP8041
TC8693
CP8034 RA8032
TL8038
TC8692
C8456
TL8031
TL8032
K8100
RA8015
28
TL8033
CP8046
CP8042
TC8430
TL8037
12
1
CP8426 48
C8455 CP8422
CP8044
CP8271
CP8425
TC8271 TC8272
LB8271 LB8272 LB8273 TC8277 TC8279 TC8276 TC8280 TC8284
IC8271
29 30
C8275
CP8421
13
8
24
IC8451
R8451 37 C8462
TC8275 TC8278 TC8282 TC8285 TC8283 FP8271 TO SPINDLE PCB TC8281 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

R8282 C8286
TC8274
C8285 C8284
CP8424
TC8273
C8287
25
36
CP8273 CP8272
14
15
PbF
9
(SIDE A)
69
TC8005
Q8560
D8550 TP8513
CP8501 CP8502
CP8035 D8571 CP8244 CP8242
TP8251 LB8514
C8504
TC8503
LB8506
RA8504
LB8503
C8503 LB8502 TP8517 TP8500 R8501 TC8501 TP8520 TC8502 LB8501 TP8515 TP8511 TP8516 TP8521 C8505 RA8502 TP8510 TP8502 TP8519 TP8501 TP8524 C8502 TC8504 TP8518 TP8525 RA8501 RA8503
TP8253 LB8513
LB8512
TP8514
48
A 1
DVD MODULE P.C.B (REP3654B...GN) (REP3654C...GCS)

CP8252 C8254 C8255
FP8501 TO OPTICAL PICKUP UNIT

1 5 10 15 20
CP8251
26
C8251
C8252 R8251
R8555
Q8552
Q8562
R8556 R8557 R8568
R8564 R8563 R8565 C8564
TC8010
TC8008
TC8009
TC8007
TC8011
R8554
R8566
C8561 C8550
1 2 3
LB8690 C8691
K8010
K8008
K8007
Q8606 Q8605
C8695 R8606
IC8605
C8605 C8606 R8605
C8554 R8553
R8567
R8558
5 4 1 2 3
IC8601
C8553
5 IC8691 1 2 4 3
IC8695
R8022 C8601
C8562
C8301
C8201
RA8021
R8611
RA8611
R8021
C8211
4
C8611
8 5
C8031 R8601 R8023 CP8002 CP8003 CP8026 C8212 CP8025 C8213 C8214 CP8024 C8215 C8216
C8228 C8202
C8011
L8550
TP8111
4
TC8006
C8552
C8563
R8559 C8551
C8006 C8008 C8009 C8007
R8313 L8202
L8201
C8010
C8304 C8303 C8206 C8307 C8208 C8622 C8621 R8314 R8622 R8621
C8113
L8302
IC8611
IC8111
5 8
5
C8651
C8111 LB8421 K8421 LB8422
C8014
C8005 C8004 C8003 C8057 C8056
C8015
C8016
C8017
28
C8302
LB8455
LB8491
LB8454
LB8453 LB8451
6
IC8051
1
C8001
LB8424 LB8456 LB8423
QR8420
LB8001
27
C8002
C8424
C8055
R8271
C8273
C8274
RA8271
C8453
C8288
C8271
C8423 C8452 C8451
LB8420
LB8002
C8272
L8420
C8051 C8052 C8053
C8054
R8420
C8420
C8461
R8281
8
PbF
10
CP8423
FP8031
FOR FLASH ROM WRITING
(SIDE B)
70
LB8452
C8112 L8301
22.2. (B) Main P.C.B.
A 1
MAIN P.C.B (REP3666F...GCS) (REP3666E...GN)

JK4501
C4589 C4588 W27
23 25
TL4301
R3533
W81
W31 W34 W33 R3541

E B
TL4303 C4313
W111
W30
W83
LB3532 R3532 LB3534
ZA4753
B E
654
R4313 D4301
18
20
W79 W84 W85 W86
R3534
W82 W15
LB3531 C4427 C4432 LB3536 R3535 R4459 LB3535
VIDEO OUT P B P R
19
PS4001
K3503 W302 W35
48 44 40 36 32 28 24 20 16 12 8 50 46 42 38 34 30 26 22 18 14 10 6 47 43 39 35 31 27 23 19 15 11 7 9 5 4 2 3 1
R3531 W12
W14
W13
K3505 C3507
W17
W18
W21
W22
W23
W24
W75
W71
16
W70 C3503
W104
49 45 41 37 33 29 25 21 17 13
W73
W74
R3536
C3511
W72
15
17
W16
W69
R4422
C3512
K3504
W19
C3505 W20
C3504
R4423 R4428
W25
W77
C3516 C3502
L3501
R4448
K4905
LEFT (2CH)
12
14
E B
Q4415 Q4414 Q4413 Q4410 Q4419
17
W76 C4319 R4337 R4349 C4331

4 3 2 1
C4312 R4335 R4357 C4338 C4340
C3524
C3501
C4423 R4460
E B 13 C E B 11 C E B 10 C E B 8 C
RIGHT (2CH) FRONT LEFT (5.1CH)
R4454 R4429 R4427 R4446 R4439
K4906
IC3501
18 34
C4321 W54 W57
K4904
K3508
C4430 R4463
K4903
C3523 W4 C4414
W53
W47
W48 W50
56 7 8
W92
C4318
C3531
K3507
K3506
R4331
C3521 W52 R4347 R4326 W303 R4355 C4336 R4332 C4317 C4334
IC4303 5 6
R4327
W55
B C
7 8
W51 C4341
C4934
123
C4424 C4429 R4464 R4467
FRONT RIGHT (5.1CH)
R4424 R4447 R4440
C3519 W5 R4434 C4415 C4416 W6
C3517 C4315
C4332 R4350 R4338 W59
TL4902 E W94
654
R4903
W49
W26
43 2 1
IC4304
W78
Q4911
W98 W102
R3542 QR3541
R4305 R4306 R4304 K4912 R4301
W80
22
W32
24
123
W109
W28
W301
R4362
S-VIDEO OUT
W29
21
LB3533
Q4302
QR4302
SURROUND LEFT
R4450 R4441
W58
C4333 C4320 R4351 W56 R4339 W60
W61
C43
W62
W8
C4425
R4465
J4911
W67
SURROUND RIGHT
E B C
C4428 R4461
C4431 C4426 R4462
C 4
C4314
W40
C4513
R4512 C4514
R4514 R4513 C4511
W3
JK4502
LB4511
R4442
R4515 ZA4751
C4512
C4403
E B
W46
W1
E B
W44
SUBWOOFER
R4433
Q4511
W43
W41
W42
C4337 R4356
C4335 R4348
C4316
Q4417
W39
W10
5 E B
R4432 R4453 C4422
C4421
W11
W36
R4451 R4443 R4452 R4444
R4435
C4417 W2
W38
W9
Q4416
W7
C4419
IC4301
4 3 2 1
IC4302
4 3 2 1
W64 W66
W63 W65 W68 W90
J4902
C4420 C4339
W45
CENTER
W37
5 6 7 8
5 6 7 8
R4516
DIGITAL AUDIO OUT COAXIAL
6
AC IN GCS 220V-240V 50/60HZ GN 220V-240V 50HZ
125V/250V T1.6AL
F1001
R4511
Q4418
Q1051
2 1
D1071
R1071
3 4
ZA1011 ZA1001 TC1004 TC1005 R1001

1
W87 C1071 W88 D1072
L1001
2
R1082 TC1006 D1011

~ -
C1081 R1083 R1084 C1082

+
R1081
D1081
D1051 C1051 R1051
P1001
C1001 K1003 D1002
Q1081
B C E
C10 D1082 D1083 R1085 R1045 D1084
C1002
TC1007 R1002
R10 W89
Q1045
C E
K1004
TC1002
4 3
C1003
K1001 TC1003 TC1001 K1002
C1011
C E
CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B
71
C1045
C1083
D1045
Q1082
R1061
ZA1002
CN6002
11
TL6001
TL6002
TL6003
TL6004
TL6005
TL6006
9 7 5 3 1
10 8 6 4 2
W108
R4362
R4305 R4306 R4304 K4912
123 654
LB6064 LB6067
W141
C B E
W109
LB6065
W140
Q4302
LB6066 W139 ZA6001 D6065 R6071 R6069 K6066 R6070 W177 W176
9 11
QR4302
W111
D6064
W81
TL4303 C4313
R4313 D4301
W110 R4301
PBF
QR6062 C
B E
CN6003
1 2 3 4 5 6 7
W86
IC6061
W179
1 2 3 4
R6065 R6064
5 6 7 8 9
R6068
IC6062
1 2 3 4 5 6 7 8 9
8 10
R6093 D6061 W172

61 60
W178 LB6061 LB6063 LB6062
R6095 R6094
W100
W101
F87PLA
W98
W99
R6067
W142 C6064 C6063 W133 W134
R6062 W164 C
B E
D6062 C6062 C6061 W165
W72
W167
W168
W104
W170
W169
QR6061
W166 R6024 R6025
L4301 C4312 C4302 C4340
W105 W106 W119 W138
W136
W102
W103
W137
W135
W171
R6063
R6061
W175
R6077 R6076
R6026 R6023
W174
R6022 R6021
C6001
80
W120
W107 TP1112 R4902 TL4901

B C E
X6001
1 2 3
R4903
W48 W50 W51 C4320 W56 W61 C4341
W92
C6011
C4304
W154
W78
Q4911
B C
Q4901
C6002 C6042
CP6001
20
C4934
123
R6011
TL4902 E W94
654
C4924 W155
C6041
IC6001
21 3 IN
QR4902
456
W93 W121 W122 W123 J4901 W95 W127
IC6011
C6012 R6074 R6075
40 41
QR4901 3 2 1
C4323 W96
1 2
W126
W124
W131
W128
W125
W129
C4324
R6012
W156
W157
W158
K6091 W163
1 3 5 7 9 11
W173
W161
W97
W159
W63 W65 W68 W90
J4902 ZA4752 C4586 C4587
R6072 R6073
W130 W132 W146
K6071
W113
W114
R1104
C1101 R1106
TP1109 TP1101 R1101 TP1102 R1125 C1127
Q1125
C1126
1 2
R1105 R1103
W116
Q1051
2 1
1 2 3
R1102 C1102 R1107 C1141 W117
B C E
TP1106 C1117 TP1108 TP1103 L1117
W147 W148 W149 TP1107 W151 W150 TP1110 C1154
R1127 C1125 D1125 R1128
TP1113 L1141 W118
W115
54 3
W152
W91 D1071 R1041 R1071

3 4
C1004
IC1101
D1141
R1126
Q1126
C1116
TP1105 C1155
W162
CN6004
2 4 6
TRANSFORMER
11
T1021
C1041
C1121 D1121 D1111 W112 J1121
QR1115
E B C
W153
321 456
W87 C1071 W88 D1072
12
W143 R1116
Q1115
IC1155
W180
1 2 3 4 5
IC1151
10
D1081
R1061
R1062
R1082 C1081 R1083 R1084 C1082
R1081
D1041
1 2 3 4
13
C1111
7 14
L1111
D1051 C1051 R1051
R1115 C1115 TP1117 K1153
1 2 3 4 5
Q1081
B C E
D1082 D1083 R1085 R1045 D1084
C1112
C1061
W181 C1157 K1154 K1155 C1156 W144 TP1116 J1172 W145 TP1114
R1046 W89
IC1021
15 16
Q1045
D1045
B C E
C1151 D1152
L1151
Q1082
C1083
B C E
D1031
4 17
L1131 W182
C1045
R1031
C1031
D1151
3 18
C1153
L1161
J1162 C1161 J1161
TP1111 K1171 R1164 R1162 R1165 R1163 TP1115
ZA1111
D1161
2 19
W304
W305
W306
C1171
20
D1171
D1173
72
W160
R6092
K6063
22.3. (C) Panel P.C.B., (D) Display Panel P.C.B. & (E) Selection Panel P.C.B.
A 1
PANEL P.C.B (REP3667B)

TC6505 TC6507
9 8 11 10
FP6501
W10
IC6551
TC6502 TC6501
3 2 4
5 6
TC6504
W9 TC6506 TC6511 S6511 O/C
VCC 2
TC6503
C6552
R6551 R6552 W7 W8
S6522 DISC_SKIP
R6521
TC6509 S6521 DISC_EX TC6508

1
TC6510
C6551
TC6532
W2
2 3 1
W6
TC6531
CP6009
64
TC6533
W3 W4
W14
C6571
W15
3
S6523 F-SKIP
FC6701A
R6532
W5
R6510 C6561 C6562 C6511 C6521 W18 X6501

1 2 3
K6592 K6591 CP6006
R6522 R6523 S6524 R-SKIP F87PL/G F86/84P
C6502
CP6001
CP6008
49
R6530
16
TC6591 TC6590
W19 R6573 W22 W21
C6531
R6531
S6533 PLAY F87P
C6508
S6531 STOP
W17
S6532 PAUSE W1
R6520
W101 W16
17
IC6501
48
W11 C6503
W13 C6504
C6501
R6574
TC6584 TC6589
R6577 R6578 W23
CP6002 W12
Q6571 C
R6572 K6571
B E
R6575 R6576 R6571 32

33
CP6005
4
DISPLAY PANEL P.C.B (REP3667B)
5
D6645 DISC5 R6645 R6617 R6616
S6616 DISC5
D6644 DISC4
D6643 DISC3
D6642 DISC2
D6641 DISC1
FC6601B
9 8 7 6 5 4 3 2 1
TC6609
PBF
R6647
R6644
R6643 TC6606
R6642 TC6607
R6641 TC6608
TC6605
TC6602 TC6603 R6646
TC6604 TC6601 S6618 DPL II
R6611 S6611 POWER
R6615 S6615 DISC4
R6614 S6614 DISC3
R6613 S6613 DISC2

S6612 DISC1
D6646 CD-MODE R6618 S6617 CD MODE

D6647 STANBY S6617 F87 CD MODE F86/84 PRG
R6612 S6618 F87 DPL LLOR F86/84 ONE TOUCH
7
1 2 3
SELECTION PANEL P.C.B (REP3667B)

FC6701B
TC6701
R6721
R6722 S6721 10 S6722 5
R6723 S6723 4
R6724 R6725 S6724 3
R6726 S6725 2 S6726 1
TC6702
R6731 TC6703
R6732 S6732 0 S6731 CANCEL
R6733 S6733 9
R6734 S6734 8
R6735 S6735 7
R6736 S6736 6
PBF
73
CP6009
64
CP6007 K6591 CP6008

49
PBF
QR6597 C
W35
CP6006 CP6003 TC6591 TC6590

W21 W20 W22
TC6521
1 2 3 4 5 6 7 8 9
TC6588 TC6595 TC6593

W26 W27 W25 W28 W34
CP6010 W38 TC6580 TC6577 W36
BE
TC6522
FC6601A
TC6585 TC6587
TC6578 TC6582
QR6596 C
BE
W19
01
48
R6573
W29
W31
R6574
W32
TC6571
TC6583
W33
TC6584 TC6589
R6577 R6578 W23
W30
TC6594 TC6596 TC6592
QR6594
EB EB C
TC6523 TC6524
W37
TC6581
W24 TC6576
20 18 16
TC6575
TC6574 TC6573
QR6593 C
BE
TC6526
TC6572
R6575 R6576
33
TC6586
39 37 36 34 32 30 29 27
TC6579
25 23 22
QR6595
13 10 1
TC6525
EB C
TC6527
EB C
CP6004
45
42
TC6529
CP6005 DP6501
TC6528
QR6591 QR6592
74
22.4. (F) Sensor P.C.B., (G) Tray Motor P.C.B. & (H) Loading Motor P.C.B.
A 1
LOADING MOTOR P.C.B (REP3465A)

CN9003
11
CL6 X CL5 X CL4 X
CL3 X CL2 X CL1 X
M9001
5
S9001 LOAD
1 4 2 3
Q9001
PbF
6
TRAY MOTOR P.C.B (REP3466A) SENSOR P.C.B (REP3466A)
FC9101
3 4 1 2 3 X 4 5 X 6 X X CL1 CL2 A 1 2 C 4 3
Q9101
CL2 X
2 1
M
M9101
FC9101
CL1 X 2 3 5 4 CL6 X 6
CL3 X CL4 X CL5 CL6
2 1
Q9103
CL3 X CL4 CL5 X X 3 4
K E X X CL8 CL7
Q9102
CN9102
PbF
PbF
11
75
23 Wiring Connection Diagram
SUBWOOFER
FRONT LEFT (5.1CH)
FRONT RIGHT (5.1CH) SURROUND LEFT SURROUND RIGHT CENTER
RIGHT (2CH)
VIDEO OUT
DIGITAL AUDIO OUT COAXIAL
LEFT (2CH)
S-VIDEO OUT
P1001 ZA1001
125V/250V T1.6AL
AC IN 120V 60HZ
PR
PB
PbF
JK4502
JK4501
PS4001 L1001
............ ......... ............ .........
50 49 48 47
3 24
MAIN P.C.B.
FP8271
1 . . . . . . . . . . . . . . 15
..........................
CN6002
.....
CN6004
10 . . . . . 2 11 . . . . . 1
.... .....
CAUTION RISK OF ELECTRIC SHOCK AC VOL TAGE LINE. PLEASE DO NOT
F1001
ZA1002
FP8101
1
DVD MODULE P.C.B.

SIDE:A
50
TRANSFORMER
TO SPINDLE MOTOR ASSEMBLY
1 . . . . 11 2 . . . 10
11
CN9003
M9001
CN6003 2 1 1011
PbF
PbF
SOLDER SIDE
LOADING MOTOR P.C.B.
76
OPTICAL PICKUP
D
PbF
DISPLAY PANEL P.C.B.

3.1
FC6701B
PbF
1 . . . . . . . . . . . . . . 25
PbF
FP8501
9
...........
DVD MODULE P.C.B.

SIDE:B
1 FC6601B
SOLDER SIDE
SELECTION PANEL P.C.B.
FP8031
1 . . . . . . . 10
SOLDER SIDE
FLASH ROM WRITING CIRCUIT

1 . . . . . . . . . 11
TRAY MOTOR P.C.B.

PbF
CN9102
M9101
CN6601A
SENSOR P.C.B.
1
M
1 2
FC9101 56 3 4
PbF
2 1 910 4 3 FC 6 5
1 . . . . . . 11 2 . . . . .10
FP6501
1 . 3
FC6701A
PbF
PANEL P.C.B.
SOLDER SIDE
77
......
FC6601A 1
24 Parts Location and Replacement Parts List

Notes: Important safety notice: Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purposes of fire-retardent (resistors), high-quality sound (capacitors), low noise (resistors), etc are used. When replacing any of these components, be sure to use only manufacturers specified parts shown in the parts list. The parenthesized indications in the Remarks columns specify the areas or colour. (Refer to the cover page for area or colour) Parts without these indications can be used for all areas. Warning: This product uses a laser diode. Refer to caution statements on Precaution of Laser Diode. Capacitor values are in microfarads (F) unless specified otherwise, P= Pico-farads (pF), F= Farads. Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM). The marking (RTL) indicates that the Retention Time is limited for this items. After the discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retention period of a availability is dependent on the type of assembly, and in accordance with the laws governing part and product retention. After the end of this period, the assembly will no longer be available. [M] Indicates in the Remarks columns indicates parts supplied by PAVCSG. Reference for O/I book languages are as follows:
Ar : Cf : Cz : Da : Pe: Arabic Canadian French Czech Danish Persian Du : En : Fr : Ge : Dutch English French German It : Ko : Po : Ru : Italian Korean Polish Russian Sp : Sw : Co : Cn : Spanish Swedish Traditional Chinese Simplified Chinese
78
24.1. Loading Mechanism, Traverse Unit and Cabinet

24.1.1. Loading Mechanism, Traverse Unit and Cabinet Parts Location
79
80
24.1.2. Loading Mechanism, Traverse Unit and Cabinet Part List

Ref. No. Part No. Part Name & Description CABINET AND CHASSIS 11P FFC (MECHA BASE) 50P FFC 11P FFC (PANEL-MAIN) FRONT PANEL ASSY REAR PANEL REAR PANEL CD BUTTON DISC BUTTON 10-KEY BUTTON A OPEN BUTTON 10-KEY BUTTON B SCREW SCREW SCREW CUSHION FOOT ASSY TOP CABINET PANEL ANGLE BOTTOM CHASSIS TRAY GUIDE L TRAY GUIDE R FL HOLDER COVER SHEET SPACER TRAY ORNAMENT ASSY SCREW SCREW SCREW TRAVERSE DECK 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 334 336 337 338 339 340 341 RDG0567 RDG0568 RDG0569 RDV0073 REZ1484 RGQ0358-K RGQ0359-K RHW81001-1 RMB0365 RME0384 RMF0324 RMM0255 XTB3+10J XTN26+8G XTWS3+10S JSM0048 RDG0562 RDG0563 RDG0564 RDG0565 RDG0566 RDG0570 RDV0072 RAE2008W-S REM0112 RMC0387 RMG0598A-K RMG0615-K RMG0620-K RMK0555 RML0646 RMM0254 RMR1447-X RMR1507-X RMS0789 RMS0802-J XTN26+14JFZ XTV2+6G XWG6FFY PULSE GEAR OPEN LOCK GEAR CLOSE LOCK GEAR TRAY BELT 11P FFC TRAY BASE ROTARY TRAY WASHER TRAY SPRING CLOSE LOCK GEAR SPRING BLOCK SHEET SLIDE PLATE L SCREW SCREW SCREW MAGNET PULLEY GEAR RELAY GEAR A RELAY GEAR B DRIVE GEAR A DRIVE GEAR B CAM GEAR LOADING BELT TRAVERSE SUB UNIT LOADING MOTOR ASSY SUPPORT SPRING FLOATING RUBBER CUSHION SHEET CUSHION RUBBER MECHA BASE CHANGE LEVER SLIDE PLATE R MAGNET HOLDER SUPPORT PIECE FIXED PIN DRIVE GEAR SHAFT SCREW PCB SCREW WASHER [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] Remarks Ref. No. Part No. 342 RMF0182 343 RMS0123-1 344 RMM0256 345 RMX0274 346 RMX0275 347 RMX0290 Part Name & Description TRAY FELT FIXED PIN B BLOCK BASE TRAY SUPPORT R TRAY SUPPORT L PLASTIC SHEET Remarks [M] [M] [M] [M] [M] [M]
1 2 3 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 26 27 28 29
REZ1483 REZ1608 REZ1609 RFKGVDF87PLA RGR0343A-E1 RGR0343A-F1 RGU2261-Q RGU2262-S RGU2263-S RGU2264-S RGU2283-S RHD30007-1SJ RHD30090 RHD30107 RKA0145-K RKA0157-N RKM0498-S RMA1769 RMK0593 RMN0730 RMN0731 RMN0766 RMV0268 RMV0279 RYF0718-S1 XTB3+6J XTBS26+10J XTBS3+8JFZ1
[M] [M] [M] [M] [M]GN [M]GCS [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
81
24.2. Component Parts List

Ref. No. Part No. Part Name & Description PRINTED CIRCUIT BOARD Remarks Ref. No. Q8560 Q8561 Q8562 Q8605 Q8606 Q9001 Q9101 Q9102 Q9103 QR1115 QR3541 QR4302 QR4901 QR4902 QR6061 QR6062 QR6591 QR6592 QR6593 QR6594 QR6595 QR6596 QR6597 QR8420 QR8571 Part No. 2SD1819A0L 2SD1819A0L 2SB09700RL 2SD1819A0L 2SD1819A0L B3NAA0000068 B3NAA0000078 B3NAA0000011 B3NAB0000027 UNR221300L UNR221200L XN0431100L XN0431100L XN0431100L UNR221100L UNR221100L UNR511F00L UNR511F00L UNR511F00L UNR511F00L UNR511F00L UNR511F00L UNR511F00L UNR521100L UNR511V00L Part Name & Description TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR CAM SENSOR POSITION SENSOR PHOTO INTERRUPTOR PHOTO REFLECTOR CHIP TRANSISTOR CHIP TRANSISTOR CHIP TRANSISTOR CHIP TRANSISTOR CHIP TRANSISTOR CHIP TRANSISTOR CHIP TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DIODES D1002 D1011 D1031 D1041 D1045 D1051 D1071 D1072 D1081 D1082 D1083 D1084 D1111 D1121 D1125 D1141 D1151 D1152 D1161 D1171 D1173 D4301 D6061 D6062 D6064 D6065 D6641 D6642 D6643 D6644 D6645 D6646 D6647 D8550 D8571 ERZVA5Z471 B0EDKT000002 B0HADV000001 B0HAGM000006 MAZ42000LF MAZ41000MF MAZ41000LF MA2C16500E MA2C18500E MA2C16500E MAZ41000HF MAZ41600LF B0JAMG000013 B0JAMG000013 MA2J11100L B0JAML000009 B0JAML000009 B0JAML000009 B0HAGM000006 B0JAME000037 MAZ41800MF MAZ40560HF B0EAKL000031 B0EAKL000031 B0EAKL000031 B0EAKL000031 B3ABA0000397 B3ABA0000397 B3ABA0000397 B3ABA0000397 B3ABA0000397 B3ABA0000397 B3AAA0000534 MA2S11100L MA2J72800L DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE CHIP INDUCTORS LB3531 LB3532 LB3533 LB3534 LB3535 J0JBC0000015 J0JBC0000015 J0JBC0000015 J0JCC0000186 J0JBC0000015 CHIP CHIP CHIP CHIP CHIP INDUCTOR INDUCTOR INDUCTOR BEADS INDUCTOR [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
REP3654B REP3654C REP3666E REP3666F REP3667B REP3667B REP3667B REP3466A REP3466A REP3465A
DVD MODULE P.C.B.(SIDE A & [M]GN B) (RTL) DVD MODULE P.C.B.(SIDE A & [M]GCS B) (RTL) MAIN P.C.B. [M]GN (RTL) MAIN P.C.B. [M]GCS (RTL) PANEL P.C.B. [M](RTL) DISPLAY PANEL P.C.B. [M](RTL) SELECTION PANEL P.C.B. [M](RTL) SENSOR P.C.B. [M](RTL) TRAY MOTOR P.C.B. [M](RTL) LOADING MOTOR P.C.B. [M](RTL) INTEGRATED CIRCUITS
IC1021 IC1101 IC1151 IC1155 IC3501 IC4301 IC4302 IC4303 IC4304 IC6001 IC6011 IC6061 IC6062 IC6501 IC6551 IC8001 IC8051 IC8111 IC8251 IC8271 IC8451 IC8601 IC8605 IC8651 IC8651 IC8691 IC8695
C0DACZH00007 C0DAEMZ00001 C0DBZHG00017 C0DBZHG00017 C9ZB00000431 C0ABBB000118 C0ABBB000118 C0ABBB000118 C0ABBB000118 MN101C28DHA C0EBE0000106 C0GAG0000007 C0GAG0000007 MN101C07AHB B3RAD0000035 MN2DS0003APH C3ABPG000068 C0CBCBD00018 C0GBG0000044 C0GBF0000004 C0FBBK000036 C0EBE0000384 C0EBA0000031 RFKFCF81H160 RFKFCF81J160 C0JBCA000066 C0JBCA000066
IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC
POWER SUPPLY VOLTAGE REGULATOR POWER SUPPLY POWER SUPPLY VIDEO SELECTOR DUAL OP AMP DUAL OP AMP DUAL OP AMP DUAL OP AMP 8 BIT MICROCONTROLLER RESET CHANGER MOTOR DRIVER CHANGER MOTOR DRIVER PANEL MICON INFRA RED RAY DV2.1 LSI 64MB SDRAM POWER SUPPLY MOTOR DRIVE MOTOR DRIVE AUDIO DAC VOLTAGE DETECTING RESET FLASH ROM FLASH ROM AND GATE LOGIC AND GATE LOGIC
[M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [SPC]GN [SPC]GCS [M] [M]
TRANSISTORS Q1045 Q1051 Q1081 Q1082 Q1115 Q1125 Q1126 Q4302 Q4410 Q4413 Q4414 Q4415 Q4416 Q4417 Q4418 Q4419 Q4511 Q4901 Q4911 Q6571 Q8550 Q8551 Q8552 2SC3311ASA B3PBA0000104 2SC3311ASA 2SC3311ASA B1DDCC000009 2SB14170JA XN0150100L 2SD0601AHL 2SD0601AHL 2SD0601AHL 2SD0601AHL 2SD0601AHL 2SD0601AHL 2SD0601AHL 2SD0601AHL 2SD0601AHL 2SC22950XL B1BACD000011 B1BCCD000013 2SD132800L 2SB1219AHL 2SD1819A0L 2SB09700RL TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
82
Ref. No. LB3536 LB4511 LB6061 LB6062 LB6063 LB6064 LB6065 LB6066 LB6067 LB8001 LB8002 LB8011 LB8271 LB8272 LB8273 LB8301 LB8302 LB8303 LB8304 LB8305 LB8401 LB8420 LB8421 LB8422 LB8423 LB8424 LB8451 LB8452 LB8453 LB8454 LB8455 LB8456 LB8491 LB8501 LB8502 LB8503 LB8504 LB8505 LB8506 LB8507 LB8511 LB8512 LB8513 LB8514 LB8690 LB8691 LB8692 LB8693
Part No. J0JBC0000015 ERJ3GEY0R00V J0JBC0000015 J0JBC0000015 J0JBC0000015 J0JBC0000015 J0JBC0000015 J0JBC0000015 J0JBC0000015 J0JHC0000045 J0JHC0000045 ERJ3GEYJ220V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 D0GB151JA008 J0JCC0000091 J0JCC0000119 J0JCC0000119 ERJ3GEY0R00V J0JCC0000091 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 J0JCC0000119 ERJ3GEYJ222V J0JHC0000045 ERJ3GEY0R00V J0JCC0000091 J0JCC0000091 D0GB152JA002 J0JCC0000091 ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V J0JCC0000091 D0GB101JA002 D0GB101JA002 D0GB101JA002
Part Name & Description CHIP INDUCTOR 0 1/16W CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR 22 1/16W 0 1/16W 0 1/16W 0 1/16W CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR 150 1/16W FILTER CHIP INDUCTOR CHIP INDUCTOR 0 1/16W FILTER CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR CHIP INDUCTOR 2.2K 1/16W CHIP INDUCTOR 0 1/16W FILTER FILTER 1.5K 1/16W FILTER 0 1/16W 0 1/16W 0 1/16W 0 1/16W FILTER 100 1/16W 100 1/16W 100 1/16W SWITCHES
Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
Ref. No. S6732 S6733 S6734 S6735 S6736 S9001
Part No. EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R K0L1BA000086
SW SW SW SW SW SW
Part Name & Description TRACK 0 TRACK 9 TRACK 8 TRACK 7 TRACK 6 OPEN
Remarks [M] [M] [M] [M] [M] [M]
CONNECTORS CN6002 CN6003 CN6004 CN9003 CN9102 PS4001 FP6501 FP8031 FP8101 FP8271 FP8501 K1MN11A00030 K1MN11A00030 K1MN11A00030 K1MN11B00065 K1MN11B00065 K1MN50A00008 K1MN11B00065 K1MN10B00098 K1MN50B00031 K1MN15B00041 K1MN26B00094 11P 11P 11P 11P 11P CONNECTORS CONNECTORS CONNECTORS CONNECTOR CONNECTOR [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
50P CONNECTORS 11P 10P 50P 15P 26P CONNECTOR CONNECTOR CONNECTOR CONNECTOR CONNECTOR
COILS & TRANSFORMERS L1001 L1111 L1117 L1131 L1141 L1151 L1161 L3501 L4301 L8201 L8202 L8301 L8302 L8420 L8550 T1021 DP6501 ELF15N003A G0A100H00014 ELELN100KA G0C330KA0004 G0C330KA0004 G0A220G00018 G0C101JA0019 G0C220JA0019 G0C391JA0019 G1C100K00020 J0JCC0000079 G1C100KA0055 J0JCC0000079 G1C220KA0055 G1C100KA0055 ETS28AV1K6AC A2BB00000124 COIL INDUCTOR COIL COIL COIL INDUCTOR INDUCTOR AXIAL INDUCTOR COIL CHIP INDUCTOR FILTER CHIP INDUCTOR FILTER CHIP INDUCTOR CHIP INDUCTOR SW TRANSFORMER FL DISPLAY OSCILLATORS X6001 X6501 X8621 H2D800400009 H2D800400009 H0J270500064 CRYSTAL OSCILLATOR CRYSTAL OSCILLATOR S/MOUNTING CRYSTAL DISPLAY TUBES FL8101 FL8102 FL8103 FL8104 F1H0J1050022 F1H0J1050022 F1H0J1050022 F1J1E1040022 1 6.3V 1 6.3V 1 6.3V 0.1 25V FUSE F1001 K5D162BK0005 1.6A FUSE FUSE PROTECTOR PR1171 VSF0015A10T IC PROTECTOR WIRES FC6601 FC6701 FC9101 REE1310 REE1309 RWJ4906082SS 9P WIRE 3P WIRE 6P FLAT CABLE EARTH TERMINALS [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
S6511 S6521 S6522 S6523 S6524 S6531 S6532 S6533 S6611 S6612 S6613 S6614 S6615 S6616 S6617 S6618 S6721 S6722 S6723 S6724 S6725 S6726 S6731
EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R EVQ21405R
SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW
OPEN/CLOSE DISC EXCHANGE DISC SKIP F. SKIP R. SKIP STOP PAUSE PLAY POWER/STANDBY DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 CD MODE DPL TRACK 10 TRACK 5 TRACK 4 TRACK 3 TRACK 2 TRACK 1 CANCEL
[M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
83
Ref. No. ZA1011 ZA1111 ZA4751 ZA4752 ZA4753 ZA6001
Part No. VMC1359 K4CZ01000027 K4CZ01000027 K4CZ01000027 K4CZ01000027 K4CZ01000027
Part Name & Description GROUND PLATE TERMINALS TERMINALS TERMINALS TERMINALS TERMINALS FUSE HOLDERS
Remarks [M] [M] [M] [M] [M] [M]
ZA1001 ZA1002
EYF52BC EYF52BC
FUSE HOLDER FUSE HOLDER JACKS
[M] [M]
JK4501 JK4502 P1001
K2YZ12000011 K2HA102B0075 K2AA2B000004
JK TERMINAL JK TERMINAL JK AC INLET CHIP RESISTORS
[M] [M] [M]
W101 W303
ERJ6GEY0R00V ERJ3GEY0R00V
0 1/10W 0 1/16W RESISTORS
[M] [M]
R7 R1001 R1002 R1031 R1041 R1045 R1046 R1051 R1061 R1062 R1071 R1081 R1082 R1083 R1084 R1085 R1101 R1102 R1103 R1104 R1105 R1106 R1107 R1115 R1116 R1125 R1126 R1127 R1128 R1162 R1163 R1164 R1165 R3531 R3532 R3533 R3534 R3535 R3536 R3541 R3542 R4301 R4304 R4305 R4306 R4313 R4326 R4327
ERJ3GEYJ682V ERDS2FJ474T ERDS2FJ474T ERG2SJ683E ERG12SJ680E ERDS2TJ273T ERDS2TJ100T ER0S2THF1502 ERDS2TJ272T ERDS2TJ273T ER0S2THF3301 ER0S2THF1202 ER0S2THF8201 ER0S2THF3001 ERDS2TJ223T ERDS2TJ104T ERDS2TJ750T ER0S2THF1201 ER0S2THF1201 ERJ6GEYJ331V ERJ3GEYJ102V D0GB101JA002 ERJ3GEYJ222V ERJ3GEYJ104V ERJ3GEYJ102V D0GB101JA002 ERJ3RBD362V ERJ3RBD132V D0GB121JA002 ERDS2TJ471T ERDS2TJ471T ERDS2TJ471T ERDS2TJ471T D1BB75R0A012 D0GB750JA019 D1BB75R0A012 D1BB75R0A012 D0GB750JA019 D0GB750JA019 ERJ3GEYJ222V ERJ3GEYJ103V D0GB152JA002 D0GB332JA002 D0GB332JA002 D0GB332JA002 ERJ3GEYJ223V ERJ3RBD752V ERJ3RBD752V
6.8K 1/16W 470K 1/4W 470K 1/4W 68K 2W 68 1/2W 27K 1/4W 10 1/4W 15 1/4W 2.7K 1/4W 27K 1/4W 33 1/4W 12 1/4W 82 1/4W 30 1/4W 22K 1/4W 100K 1/4W 75 1/4W 12 1/4W 12 1/4W 330 1/10W 1K 1/16W 100 1/16W 2.2K 1/16W 100K 1/16W 1K 1/16W 100 1/16W 3.6K 3W 1.3K 3W 120 1/16W 470 1/4W 470 1/4W 470 1/4W 470 1/4W 5 1/16W 75 1/16W 5 1/16W 5 1/16W 75 1/16W 75 1/16W 2.2K 1/16W 10K 1/16W 1.5K 1/16W 3.3K 1/16W 3.3K 1/16W 3.3K 1/16W 22K 1/16W 7.5K 3W 7.5K 3W
[M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
Ref. No. R4331 R4332 R4335 R4337 R4338 R4339 R4347 R4348 R4349 R4350 R4351 R4355 R4356 R4357 R4362 R4422 R4423 R4424 R4427 R4428 R4429 R4432 R4433 R4434 R4435 R4439 R4440 R4441 R4442 R4443 R4444 R4446 R4447 R4448 R4450 R4451 R4452 R4453 R4454 R4459 R4460 R4461 R4462 R4463 R4464 R4465 R4467 R4511 R4512 R4513 R4514 R4515 R4516 R4902 R4903 R6011 R6012 R6021 R6022 R6023 R6024 R6025 R6026 R6026 R6061 R6062 R6063 R6064 R6065 R6067 R6068 R6069 R6070 R6071
Part No. ERJ3RBD752V ERJ3RBD752V D0GB752JA008 D0GB752JA008 D0GB752JA008 D0GB752JA008 D0HB153ZA002 D0HB153ZA002 D0GB273JA002 D0GB273JA002 D0GB273JA002 D0HB153ZA002 D0HB153ZA002 ERJ3GEYJ473V ERJ3GEYJ103V ERJ3GEYJ473V ERJ3GEYJ473V ERJ3GEYJ473V ERJ3GEYJ473V D0GB821JA002 D0GB821JA002 ERJ3GEYJ473V ERJ3GEYJ473V ERJ3GEYJ473V ERJ3GEYJ473V D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 D0GB821JA002 ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ102V ERJ3GEYJ102V ERJ3GEYJ102V ERJ3GEYJ221V D0GB750JA019 ERJ3GEYJ103V ERJ6GEYJ331V ERJ6GEYJ331V ERJ3GEYJ473V ERJ3GEYJ331V ERJ3GEYJ103V ERJ3GEYJ103V ERJ3GEYJ103V ERJ3GEY0R00V ERJ3GEY0R00V D0GB302JA008 ERJ3GEYJ182V ERJ3GEYJ331V ERJ3GEYJ472V ERJ3GEYJ103V ERJ3GEYJ331V ERJ3GEYJ331V ERJ3GEYJ331V ERJ3GEYJ472V ERJ3GEYJ103V D0GB151JA008 D0GB121JA002
Part Name & Description 7.5K 3W 7.5K 3W 7.5K 1/16W 7.5K 1/16W 7.5K 1/16W 7.5K 1/16W 15K 3W 15K 3W 27K 1/16W 27K 1/16W 27K 1/16W 15K 3W 15K 3W 47K 1/16W 10K 1/16W 47K 1/16W 47K 1/16W 47K 1/16W 47K 1/16W 820 1/16W 820 1/16W 47K 1/16W 47K 1/16W 47K 1/16W 47K 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 820 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 1K 1/16W 1K 1/16W 1K 1/16W 220 1/16W 75 1/16W 10K 1/16W 330 1/10W 330 1/10W 47K 1/16W 330 1/16W 10K 1/16W 10K 1/16W 10K 1/16W 0 1/16W 0 1/16W 3K 1/16W 1.8K 1/16W 330 1/16W 4.7K 1/16W 10K 1/16W 330 1/16W 330 1/16W 330 1/16W 4.7K 1/16W 10K 1/16W 150 1/16W 120 1/16W
Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]GCS [M]GN [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
84
Ref. No. R6072 R6073 R6074 R6075 R6076 R6077 R6092 R6093 R6094 R6095 R6510 R6520 R6521 R6522 R6523 R6530 R6531 R6532 R6551 R6552 R6571 R6572 R6573 R6574 R6575 R6576 R6577 R6578 R6611 R6612 R6613 R6614 R6615 R6616 R6617 R6618 R6641 R6642 R6643 R6644 R6645 R6646 R6647 R6721 R6722 R6723 R6724 R6725 R6726 R6731 R6732 R6733 R6734 R6735 R6736 R8011 R8021 R8022 R8023 R8041 R8232 R8233 R8235 R8236 R8241 R8242 R8251 R8271 R8281 R8282 R8311 R8312 R8313 R8314
Part No. ERJ3GEYJ223V ERJ3GEYJ223V ERJ3GEYJ472V ERJ3GEYJ104V D0GB393JA002 D0GB272JA002 ERJ3GEYJ103V ERJ3GEYJ103V ERJ3GEYJ103V ERJ3GEYJ103V ERJ3GEYJ103V ERJ3GEYJ103V D0GB821JA002 ERJ3GEYJ102V D0GB122JA019 ERJ3GEYJ103V D0GB821JA002 ERJ3GEYJ102V D0GB220JA002 D0GB220JA002 ERJ3GEYJ822V ERJ3GEYJ104V ERJ3GEYJ473V ERJ3GEYJ473V ERJ3GEYJ473V ERJ3GEYJ473V ERJ3GEYJ473V ERJ3GEYJ473V D0GB821JA002 ERJ3GEYJ102V D0GB122JA019 D0GB152JA002 ERJ3GEYJ182V ERJ3GEYJ222V D0GB332JA002 ERJ3GEYJ472V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V ERJ3GEYJ221V D0GB152JA002 ERJ3GEYJ182V ERJ3GEYJ222V D0GB332JA002 ERJ3GEYJ472V ERJ3GEYJ682V D0GB122JA019 D0GB152JA002 ERJ3GEYJ182V ERJ3GEYJ222V D0GB332JA002 ERJ3GEYJ472V ERJ3GEY0R00V ERJ2GEJ103X ERJ2GEJ103X ERJ2GEJ473X ERJ2GEJ330X ERJ2GEJ103X ERJ3GEYJ153V ERJ3GEYJ822V ERJ3GEYJ822V ERJ3GEYJ223V D0GB752JA008 D0GF6R8JA017 ERJ14YKR39H D0GB101JA002 D0GB101JA002 ERJ3RBD242V ERJ3RBD102V ERJ3RBD243V ERJ3GEY0R00V
Part Name & Description 22K 1/16W 22K 1/16W 4.7K 1/16W 100K 1/16W 39K 1/16W 2.7K 1/16W 10K 1/16W 10K 1/16W 10K 1/16W 10K 1/16W 10K 1/16W 10K 1/16W 820 1/16W 1K 1/16W 1.2K 1/16W 10K 1/16W 820 1/16W 1K 1/16W 22 1/16W 22 1/16W 8.2K 1/16W 100K 1/16W 47K 1/16W 47K 1/16W 47K 1/16W 47K 1/16W 47K 1/16W 47K 1/16W 820 1/16W 1K 1/16W 1.2K 1/16W 1.5K 1/16W 1.8K 1/16W 2.2K 1/16W 3.3K 1/16W 4.7K 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 220 1/16W 1.5K 1/16W 1.8K 1/16W 2.2K 1/16W 3.3K 1/16W 4.7K 1/16W 6.8K 1/16W 1.2K 1/16W 1.5K 1/16W 1.8K 1/16W 2.2K 1/16W 3.3K 1/16W 4.7K 1/16W 0 1/16W 10K 2W 10K 2W 47K 2W 33 2W 10K 2W 15K 1/16W 8.2K 1/16W 8.2K 1/16W 22K 1/16W 7.5K 1/16W 6.8 1/16W 0.KR 1/4W 100 1/16W 100 1/16W 2.4K 3W 1K 3W 24K 3W 0 1/16W
Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
Ref. No. R8315 R8321 R8322 R8325 R8326 R8331 R8332 R8335 R8341 R8401 R8402 R8403 R8404 R8420 R8451 R8501 R8550 R8551 R8552 R8553 R8554 R8555 R8556 R8557 R8558 R8559 R8560 R8561 R8562 R8563 R8564 R8565 R8566 R8567 R8568 R8569 R8570 R8601 R8605 R8606 R8611 R8621 R8622 K3503 K3504 K3505 K3506 K3507 K3508 K4912 K6091 K6591 K8002 K8003 K8005 K8007 K8008 K8010 K8100 K8321 K8325 K8331 K8335 K8341 K8421 K8651 RA8011 RA8012 RA8013 RA8014 RA8015 RA8016
Part No. ERJ3GEYJ6R8V ERJ3RBD161V ERJ3RED100V ERJ3RBD161V ERJ3RED100V ERJ3RBD161V ERJ3RED100V ERJ3RED820V ERJ3RED820V ERJ2GEJ473X ERJ2GEJ101X ERJ2GEJ101X ERJ2GEJ101X ERJ3GEYJ222V ERJ3GEY0R00V ERJ3GEY0R00V D0GB752JA008 ERJ3GEY0R00V ERJ3GEYJ331V ERJ3GEYJ102V ERJ3GEYJ220V ERJ3GEYJ2R2V D0GB560JA002 ERJ3GEYJ510V ERJ3GEYJ473V ERJ3GEYJ153V ERJ3GEYJ102V ERJ3GEY0R00V ERJ3GEYJ331V ERJ3GEYJ102V D0GB100JA002 ERJ3GEYJ2R2V D0GB560JA002 ERJ3GEYJ510V ERJ3GEYJ473V ERJ3GEYJ123V ERJ3GEYJ104V ERJ3GEYJ102V ERJ3GEYJ104V ERJ3GEYJ103V ERJ2GEJ101X D0GB105JA002 ERJ3RBD471V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V ERJ6GEY0R00V ERJ2GE0R00X ERJ2GE0R00X ERJ2GE0R00X ERJ2GE0R00X ERJ2GE0R00X ERJ2GE0R00X ERJ3GEY0R00V ERJ2GE0R00X ERJ2GE0R00X ERJ2GE0R00X ERJ2GE0R00X ERJ2GE0R00X ERJ3GEY0R00V ERJ2GE0R00X EXB28V820JX EXB28V820JX EXB28V820JX EXB28V820JX D1H422020001 EXB28V820JX
Part Name & Description 6.8 1/16W 160 3W 10 3W 160 3W 10 3W 160 3W 10 3W 82 3W 82 3W 47K 2W 100 2W 100 2W 100 2W 2.2K 1/16W 0 1/16W 0 1/16W 7.5K 1/16W 0 1/16W 330 1/16W 1K 1/16W 22 1/16W 2.2 1/16W 56 1/16W 51 1/16W 47K 1/16W 15K 1/16W 1K 1/16W 0 1/16W 330 1/16W 1K 1/16W 10 1/16W 2.2 1/16W 56 1/16W 51 1/16W 47K 1/16W 12K 1/16W 100K 1/16W 1K 1/16W 100K 1/16W 10K 1/16W 100 2W 1M 1/16W 470 3W 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/16W 1/4W 1/4W 1/4W 1/4W 1/4W 1/16W 1/4W RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR RESISTOR
Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
CHIP CHIP CHIP CHIP CHIP CHIP
85
Ref. No. RA8017 RA8018 RA8021 RA8031 RA8032 RA8271 RA8401 RA8402 RA8501 RA8502 RA8503 RA8504 RA8611
Part No. EXB28V820JX EXB28V820JX D1H410320002 D1H447220001 D1H447220001 D1H410320002 D1H410120001 D1H410120001 D1H456020001 EXB28V560JX D1H456020001 D1H456020001 D1H447220001
Part Name & Description CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CHIP RESISTOR CAPACITORS
Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
C1001 C1002 C1003 C1004 C1011 C1031 C1041 C1045 C1051 C1061 C1071 C1081 C1082 C1083 C1101 C1102 C1111 C1112 C1115 C1116 C1117 C1121 C1125 C1126 C1127 C1141 C1151 C1153 C1154 C1155 C1156 C1157 C1161 C1171 C3501 C3502 C3503 C3504 C3505 C3507 C3511 C3512 C3516 C3517 C3519 C3521 C3523 C3524 C3531 C4302 C4312 C4313 C4314 C4315 C4316 C4317 C4318 C4319
ECQU2A104MLC ECQU2A104MLC ECKWNA471MBV ECKWNA102MEV ECA2WHG220E F1B3A332A009 F2A1H4700002 F2A1E470A002 ECQB1H331KF4 ECQB1H681JF4 ECQB1H473JF4 ECQB1H122JF4 ECQB1H104JF4 F2A1H1010002 ECQV1H104JL2 ECQB1H563JF4 F2A1A1020056 F2A1A102A206 ECUV1C104ZFV F2A1A221A206 F2A0J102A247 F2A0J1020045 ECUV1C104ZFV ECJ1VB1H102K F2A0J102A247 F2A1E1010067 F2A1E3310051 F2A1E331A205 F2A1C221A236 F2A1C221A236 ECUVNC104KBV ECUVNC104KBV F2A1H2200032 F2A1A1010072 F2A0J221A245 ECJ1VF1H103Z ECJ1VB1H103K ECUVNC104KBV F2A1H220A236 ECUVNC104KBV F1H0J1050013 F1H0J1050013 ECJ1VF1H103Z F2A0J102A247 F2A0J102A247 F2A0J102A247 F2A0J331A247 F2A0J331A247 ECJ1VB1H103K ECQV1H104JL3 F2A1A102A206 ECUV1C104ZFV ECUV1C104ZFV ECUV1C104ZFV ECUV1C104ZFV ECUV1C104ZFV ECUV1C104ZFV ECUV1C104ZFV
0.1 100V 0.1 100V 470P 10V 1000P 10V 22 250V 3300P 1000 47P 50V 47P 25V 330P 50V 680P 50V 0.047 50V 1200P 50V 0.1 50V 100P 50V 0.1 50V 0.056 50V 1000P 10V 1000P 10V 0.1 16V 220P 10V 1000P 6.3V 1000P 6.3V 0.1 16V 1000P 50V 1000P 6.3V 100P 25V 330P 25V 330P 25V 220P 16V 220P 16V 0.1 16V 0.1 16V 22P 50V 100P 10V 220P 6.3V 0.01 50V 0.01 50V 0.1 16V 22P 50V 0.1 16V 1 6.3V 1 6.3V 0.01 50V 1000P 6.3V 1000P 6.3V 1000P 6.3V 330P 6.3V 330P 6.3V 0.01 50V 0.1 50V 1000P 10V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V
[M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
Ref. No. C4320 C4321 C4323 C4324 C4331 C4332 C4333 C4334 C4335 C4336 C4337 C4338 C4339 C4340 C4341 C4403 C4414 C4415 C4416 C4417 C4419 C4420 C4421 C4422 C4423 C4424 C4425 C4426 C4427 C4428 C4429 C4430 C4431 C4432 C4511 C4512 C4513 C4514 C4586 C4587 C4588 C4589 C4924 C4934 C6001 C6002 C6011 C6012 C6041 C6042 C6061 C6062 C6063 C6064 C6501 C6502 C6503 C6504 C6508 C6511 C6521 C6531 C6551 C6571 C8001 C8002 C8003 C8004 C8005 C8006 C8007 C8008 C8009 C8010
Part No. ECUV1C104ZFV ECUV1C104ZFV F2A1H221A236 F2A1H221A236 ECJ1VC1H820J ECJ1VC1H820J ECJ1VC1H820J ECJ1VC1H820J ECJ1VC1H820J ECJ1VC1H820J ECJ1VC1H820J ECJ1VC1H680J ECUV1C104ZFV F2A1H221A236 ECQV1H104JL3 ECUV1C104ZFV F2A1E470A205 F2A1E470A205 F2A1E470A205 F2A1E470A205 F2A1E470A205 F2A1E470A205 F2A1E470A205 F2A1E470A205 ECJ1VC1H102J ECJ1VC1H102J ECJ1VC1H102J ECJ1VC1H102J ECJ1VC1H102J ECJ1VC1H102J ECJ1VC1H102J ECJ1VC1H102J ECUV1C104ZFV ECUV1C104ZFV ECUV1C104ZFV F2A1E470A205 F2A1E470A205 F2A0J470A179 ECUV1C104ZFV ECUV1C104ZFV ECUV1C104ZFV ECUV1C104ZFV F2A1H221A236 F2A1H221A236 F2A0J221A245 ECUV1C104ZFV F2A0J221A245 ECUV1C104ZFV ECJ1VC1H331K ECJ1VC1H331K F2A1E470A205 ECUV1C104ZFV F2A1E470A205 ECUV1C104ZFV ECEA0JKS470I ECJ2VF1C104Z ECEA1VKS100I ECJ1VF1H103Z ECUV1C104ZFV ECJ1VF1H103Z ECJ1VF1H103Z ECJ1VF1H103Z F2A0J470A245 ECJ1VF1H103Z EEEFC0J101P EEE0GA331WP ECJ1VB1H222K ECJ0EF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ0EF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ0EF1C104Z
Part Name & Description 0.1 16V 0.1 16V 220P 50V 220P 50V 82P 50V 82P 50V 82P 50V 82P 50V 82P 50V 82P 50V 82P 50V 68P 50V 0.1 16V 220P 50V 0.1 50V 0.1 16V 47P 25V 47P 25V 47P 25V 47P 25V 47P 25V 47P 25V 47P 25V 47P 25V 1000P 50V 1000P 50V 1000P 50V 1000P 50V 1000P 50V 1000P 50V 1000P 50V 1000P 50V 0.1 16V 0.1 16V 0.1 16V 47P 25V 47P 25V 47P 6.3V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 220P 50V 220P 50V 220P 6.3V 0.1 16V 220P 6.3V 0.1 16V 330P 50V 330P 50V 47P 25V 0.1 16V 47P 25V 0.1 16V 47 6.3V 0.1 16V 10 35V 0.01 50V 0.1 16V 0.01 50V 0.01 50V 0.01 50V 47P 6.3V 0.01 50V 100P 6.3V 330P 4V 2200P 50V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V
Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
86
Ref. No. C8011 C8012 C8013 C8014 C8015 C8016 C8017 C8018 C8019 C8020 C8021 C8022 C8023 C8024 C8025 C8026 C8027 C8028 C8031 C8051 C8052 C8053 C8054 C8055 C8056 C8057 C8111 C8112 C8113 C8201 C8202 C8203 C8204 C8205 C8206 C8207 C8208 C8211 C8212 C8213 C8214 C8215 C8216 C8217 C8218 C8221 C8222 C8223 C8224 C8225 C8226 C8227 C8228 C8229 C8232 C8233 C8234 C8235 C8236 C8237 C8238
Part No. F1H0J1050013 ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z F1H0J1050013 F1H0J1050013 ECJ0EF1C104Z ECJ0EF1C104Z F1H0J1050013 ECJ0EF1C104Z ECJ0EF1C104Z ECJ1ZF1C104Z F1H0J1050013 ECJ1VB1H222K ECJ1ZF1C104Z F1H0J1050013 ECJ0EF1C104Z F1H0J1050013 ECJ1ZF1C104Z F1H0J1050013 ECJ0EF1C104Z ECJ1VC1H221J F1H0J1050013 F1H0J1050013 ECJ0EF1C104Z ECJ1VB1H222K ECUVNC104KBV ECJ2FB1A105K ECJ1VC1H471J EEE0JA101WR EEEFC0J101P ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z F1H0J1050013 ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1VB1C333K ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1VB1H562K ECJ1VB1C183K F1H0J1050013 F1H0J1050013 ECUVNC104KBV ECUVNC104KBV ECUVNC104KBV ECUVNC104KBV ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ2FB1A105K ECJ2FB1A105K ECJ1ZF1C104Z ECJ1VB1H472K ECJ1ZF1C104Z ECJ1VC1H102J ECJ1VC1H102J ECJ1VC1H102J ECJ1VC1H821J
Part Name & Description 1 6.3V 0.1 16V 0.1 16V 0.1 16V 1 6.3V 1 6.3V 0.1 16V 0.1 16V 1 6.3V 0.1 16V 0.1 16V 0.1 16V 1 6.3V 2200P 50V 0.1 16V 1 6.3V 0.1 16V 1 6.3V 0.1 16V 1 6.3V 0.1 16V 220P 50V 1 6.3V 1 6.3V 0.1 16V 2200P 50V 0.1 16V 1 10V 470P 50V 100P 6.3V 10P 6.3V 0.1 16V 0.1 16V 0.1 16V 1 6.3V 0.1 16V 0.1 16V 0.033 16V 0.1 16V 0.1 16V 0.1 16V 5600P 50V 0.018 16V 1 6.3V 1 6.3V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 1 10V 1 10V 0.1 16V 4700P 50V 0.1 16V 1000P 50V 1000P 50V 1000P 50V 820P 50V
Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
Ref. No. C8241 C8242 C8251 C8252 C8253 C8254 C8255 C8261 C8271 C8272 C8273 C8274 C8275 C8284 C8285 C8286 C8287 C8288 C8301 C8302 C8303 C8304 C8307 C8311 C8312 C8400 C8420 C8423 C8424 C8451 C8452 C8453 C8455 C8456 C8461 C8462 C8501 C8502 C8503 C8504 C8505 C8506 C8550 C8551 C8552 C8553 C8554 C8561 C8562 C8563 C8564 C8601 C8605 C8606 C8611 C8621 C8622 C8651 C8652 C8691 C8695
Part No. ECUVNC104KBV ECUVNC104KBV EEEFC0J221P EEE1CA220WR ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z EEEFC1C470P EEE0JA330WR ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1VB1H103K ECJ1VB1H103K ECJ1VB1H103K ECUVNC104KBV ECJ1ZF1C104Z EEE0JA221WP EEE0JA330WR ECJ1ZF1C104Z F1H0J1050013 ECJ1ZF1C104Z ECJ1ZF1C104Z F1H0J1050013 ECJ1VC1H150J F2G0J331A015 ECJ1ZF1C104Z ECJ1ZF1C104Z F3F1A106A001 F3F1A106A001 F3F1A106A001 ECJ0EF1C104Z ECJ1ZF1C104Z F2G0J101A015 ECJ1ZF1C104Z F1K1A1060017 ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ1VC1H221J ECUV1H101JCV EEE0JA330WR ECJ1ZF1C104Z EEEFC1C100R EEE0JA470WR F1H0J1050013 ECJ1ZF1C104Z EEEFC1C100R EEE0JA470WR F1H0J1050013 ECJ0EF1C104Z ECJ0EF1C104Z ECJ1VB1A224K ECJ1ZF1C104Z ECJ1VC1H390J ECJ1VC1H050D ECJ1ZF1C104Z ECJ1ZF1C104Z ECJ0EF1C104Z ECJ0EF1C104Z
Part Name & Description 0.1 16V 0.1 16V 220P 6.3V 22P 16V 0.1 16V 0.1 16V 0.1 16V 0.1 16V 47 16V 33P 6.3V 0.1 16V 0.1 16V 0.1 16V 0.01 50V 0.01 50V 0.01 50V 0.1 16V 0.1 16V 220P 6.3V 33P 6.3V 0.1 16V 1 6.3V 0.1 16V 0.1 16V 1 6.3V 15P 50V 330P 6.3V 0.1 16V 0.1 16V 10 10V 10 10V 10 10V 0.1 16V 0.1 16V 100P 6.3V 0.1 16V 10 10V 0.1 16V 0.1 16V 0.1 16V 220P 50V 100P 50V 33P 6.3V 0.1 16V 10P 16V 47P 6.3V 1 6.3V 0.1 16V 10P 16V 47P 6.3V 1 6.3V 0.1 16V 0.1 16V 0.22 10V 0.1 16V 39P 50V 5P 50V 0.1 16V 0.1 16V 0.1 16V 0.1 16V
Remarks [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M] [M]
24.3. Packing Materials & Accessories Parts List

Ref. No. Part No. Part Name & Description PACKING MATERIALS PACKING CASE PACKING CASE POLYFOAM MIRAMAT SHEET ACCESSORIES Remarks Ref. No. A1 A1-1 A2 A2 A3 A3 A4 Part No. N2QAJB000092 RKK-HTR0051K K2CJ2DA00008 RJA0019-2X RQT7292-P RQT7297-K K2KA6CA00001 Part Name & Description REMOTE CONTROL R/C BATTERY COVER AC CORD AC CORD O/I BOOK (En/ Sp) O/I BOOK (Co) A/V CORD Remarks [M] [M] [M]GN [M]GCS [M] [M]GCS [M]
P1 P1 P2 P3
RPG7189 RPG7190 RPN1659 RPFX0058
[M]GCS [M]GN [M] [M]
87
24.4. Packaging
88
PRT0403 D/K/J/N/L

Panasonic DVD f87

Uploaded by

Copyright:

Available Formats

Panasonic DVD f87

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Panasonic DVD f87

Uploaded by

Copyright:

Available Formats

What are the disc formats supported by the DVD player?

What are the disc formats supported by the DVD player?

What are the video and audio outputs of the DVD player?

What are the video and audio outputs of the DVD player?

ORDER NO.

Total harmonic distortion: lCD audio: 0.0025%

Power consumption: Dimensions: Mass:

10 W 430 (W) x 412.9 (D) x 68 (H) mm Approx. 4.0kg

16 Disassembly and Main Component Replacement Procedures 30 30 31 32 32 32 33 33 33

1 Before Use (For GCS Only)

Leakage Current Cold Check

Leakage Current Hot Check (See Figure 1)

3 Before Repair and Adjustment

4 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices

5 Handling the Lead-free Solder

6 Cautions to be taken when handling Optical Pickup

Handling Optical Pickup

Cautions to be taken during replacement of Optical Pickup

Grounding for Preventing Electrostatic Discharge

7 Precaution of Laser Diode

n Use of Caution Labels

AC power supply cord (for GCS)

AC power supply cord (for GN only)

11.2. Why use HighMAT?

11.3. The advantages of using HighMAT

11.4. Outline of the HighMAT standard

12 Procedure for repairing the set

12.1. Distinguish the trouble cause

4. Display Unit (No display) Cause 3 1. Mechanical block 2. O.P.U. 3. Circuit

12.2. Diagnosis of Optical Pick-up Unit

13 Optical Pickup Self-Diagnosis and Replacement Procedure

Checking spindle motor usage time

Resetting DVD, CD laser usage time

Resetting spindle motor usage time

13.2.1. Cautions to be taken during replacement of optical pickup

14.1. Automatic Displayed Error Codes

14.1.3. Description of Error Code 14.1.3.1. F61

14.2. Memorized Error Codes

14.3. Service Mode Table 1

Player buttons PAUSE + OPEN/CLOSE

PAUSE SKIP/SEARCH<< OPEN/CLOSE PAUSE

14.4. DVD/CD Self-Diagnosis Error Code Description

(Spindle servo, DSC, SP motor, CLV servo failure)

14.5. Error Codes Stored During No Play

Error Code F0C3 F0C4 F0C5

System Computer Item

Setting Task DiscManager DiscManager DiscManager

Internal error in system computer 0xD0C3 0xD0C4 0xD0C5

14.6. Service Mode Table 2

Cancelled automatically 5 seconds later.

Cancellation method Turn off secondary power.

Lighting of display tube

Press STOP or OPEN/CLOSE button.

Repeat the same operation.

Cancelled automatically 5 seconds later.

14.7. Service Mode Table 3

Cancelled automatically 5 seconds later.

Cancelled automatically 5 seconds later.

Timer 2 check. Spindle motor operation timer.