GSM Pots Adapter

CN2HK LIMITED
GSM Fixed Wireless Terminal

(CK-8801-QUAD)
User Manual
Please read this manual before operating this product.

After you finish reading this manual, store it in a safe place for future reference.
ENG
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the users authority to operate the equipment.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
CK-8801 V1.1
Product Introduction
Congratulations on purchasing of our Fixed Wireless Terminal. Before using this terminal, please
kindly read this user guide carefully.
This is our new design, which uses GSM networks to operate. You can dial the local calls,
domestic and international calls with this Terminal connecting with a common wired desktop
phone and a standard SIM card. It is widely used in these areas:
Remote country
Mountains
Dwelling house with weak signals
Public telephone shops
Offices
Removable places such as Ships, Trains, and Long distance buses
Our wireless Terminal also has these characteristics as below:
Easy to install
Easy to operation
Powerful capacity of signals receiving
Clear talking setting
Long using life
Steady performance
Key Technical Specifications

Following are the key technical specifications of this Terminal:
1.
Networks support: GSM 850/900/1800/1900MHz
2.
3.
4.
5.
6.
Voltage: DC 9V /DC12V
7.
Peak power consumption: 0.25W/0.5W
8.
Receive sensitivity: -104db
9.
Antenna increment: All directions: 5.0db
Stand by hours: 48 Hours

Talk time: 2-6 Hours
Charging time: 6 hours
Power consumption:
Static
25MA
500MA
emission
Certain/Selection: 12db
CK-8801 V1.1
Key functions
The key functions of the Terminal are list as below:
1.
2.
3.
4.
5.
6.
7.
Multicolor backlight display (e.g.: blue, green)

Can dial the local calls, mobile calls, international calls and special free calls
Supports modem mode
No need to dial area code when calling local numbers
Automatically connects to IP network when dialing long distance(optional)
Automatic card-locking and netwok -locking enable
Caller ID display, time and date display, the power supply of battery can display at the
same time on the LCD.
8. Cost rate setting enable
Cautions and Storage

Cautions
1. This terminal should not be used at garage, oil storage, and chemical plant or near to any
inflammable or explosive substance.
2. This terminal should be avoided in the hospital. It will interfere with medical electronic
equipments such as pacemaker and audiphones.
3. If it is found that the terminal is not successful in login onto network, please check whether
the SIM card or antenna is well installed.
4. It is blocked to touch the antenna when the Terminal is being used. (Being making calls or
receiving calls), otherwise the terminal will be damaged. This kind of damage is beyond
the range of warranty.
5. When the terminal is being used, it should be placed where signal is strong enough. In order
to ensure good voice quality, the terminal should be far from other electronic equipment.
6. Dont use chemic substance to clean the terminal, but use dry soft cloth to clean it.
7. Don't disassemble the terminal by yourself. If there is any problem, please contract the
authorized personnel.
Storage:
1. The terminal that is packed or not could piled up no more than 10 layers.
2. The terminal should be saved in ventilate and dry place.
3. Dont knock the terminal to avoid breaking the case.
CK-8801 V1.1
Connect the terminal

Connecting Your Service Provider
To use the networks services available in you terminal, you will need to sign up with wirelesses
provider and purchase a SIM (Subscriber Identity Module) Card or purchase a prepaid SIM card.
In many cases, the wireless provider will make available descriptions of its services and
instructions for using its features. Wireless provider may differ in their support of features. Before
you sigh up, make sure a wireless provider support the features that you need.
Installing the Antenna

To choose a proper place for the antenna is the first and very important step for antenna
installing. You can use your mobile phone to search for the place where the strongest signal is.
Then put the antenna here.
Please do not make the antenna too close to the terminal. It will disturb the signal of the
terminal.
Please do not make the antenna and the terminal too close to the TV set, computer, and
radiogram. It will disturb the signal of the terminal.
Inserting a SIM Card

Make sure the terminal is switched off and the AC adapter is unplugged: insert the SIM card only
when the terminal is switched off and the AC adapter is unplugged. Follow the instructions below
to insert a SIM Card into the terminal.
1). Screw off the screw of SIM card case, and open the cover.
2). Slide back the SIM card door and lift it up.
3). Slide the SIM card into the SIM door making sure that the clipped corner of the SIM
card lines up with the clipped corner of the SIM holder.
4). Close the SIM card door and slide it to lock the SIM card in place.
5). Replace the cover of SIM card case and fixes it with a screw.
CK-8801 V1.1
Connecting your terminal with desktop phone

If you want to use the terminal to make calls, you should connect the terminal with a common
wired desktop phone.
There is one or two communication portals at the back of the terminal (Picture A).You can
connect one desktop phone and billing machine (optional) with our terminal. Its very easy to
connect the phone and terminal, just need a common communication cable (Picture B and
picture C).
Operation and Setting

----PIN Lock
*00#000#
*00#010#
*00#011#
*00#012#
Restore to factory setting

Auto lock Sim Card (This function will be cancelled if restore to factory setting )
Lock Sim Card manually <initial pin code should be 1234>
Unlock Sim card manually <pin code restore to 1234,but Sim card pin keep open>
----Phone Lock (optional)

*00#013#
Lock phone function open and Lock phone
*00#014#
Unlock Phone function
After activate lock phone function, you have to shut down the gateway and re-open it to take
effect.
After activate lock phone function, if you put another sim card into the device, it will not permit to
call out and "ERR--08" will be displayed on LCD.
----Call billing function setting
(Example for China mainland, other countries customer may adjust according to their real
application).
*00#016#
*00#017#
Charge for first 3 minutes

No charge for first 3 minutes
*00#018#ABCD#
(RMB)
*00#019#
First 3 minutes fee rate: Outgoing call:0.ABRMB. Incoming call: 0.CD
AB CD EFG HIJ KLM NOP# Fee rate setting
CK-8801 V1.1
Local call
DDD
HK,MACAO,TAIWAN Call
US, Canada, Hawaii
UK, France, Italy, Germany, Japan, Korea, NZ, AU
Singapore, Malaysia, Thailand, Indonesia, Philippines
0.AB RMB /minute

0.CD RMB /minute
E.FG RMB/ minute
H.IJ RMB/ minute
K.LM RMB/ minute
Other countries IDD

N.OP RMB /minute
====================================================================
*00#050#
Permit incoming call(default)
*00#051#
Prohibit incoming call
*00#052#
Number segment close (default)
*00#053#
Number segment open
*00#054#
LCD display Prefix IP number close (default).
*00#055#
LCD display Prefix IP number open
----Change Charge time.
*00#056#
change charge time
*00#056#00# 60s
this represents 60s as 1 charging minute
*00#056#01# 58s
*00#056#02# 55s
*00#056#03# 50s
==========================================
*00#057#
Change Display Time format :*00#057#YYMMDDHHMM#
YY- Year, MM- Month, DD- Date, HH-Hour, MM-Minute
*00#059#00000# "0" permit Outgoing call, "1" prohit outgoing call, eg *00#059#11111#
Squence: Frist "0" or "1" -Local mobile number, 2'nd-Local pstn number, 3'rd-Long distance
mobile number, 4th- Long distance pstn number, 5th- International number
*00#061# AAAAAA#
*00#062# AAAAAA#
*00#063# AAAAAA#
*00#064# AAAAAA#
*00#065# AAAAAA#
Set 1st IP number eg. *00#061#17951# IP number from 3 -13 digit.

Set 2nd IP number , eg.:*00#062#17911#
Set 3rd IP number eg.:*00#063#193899#
Set 4th, IP number eg:*00#064#19314#
Set 5th IP number eg:*00#065#19314#
CK-8801 V1.1
*00#070# ABCDE#
"ABCDE": "0"-don't add IP number, "1~5"-adding related IP number
as above setting.
A- local mobile phone number
B- Local pstn number
C- Long distance mobile phone number
D- Long distance pstn number
E- International phone number
eg: all don't add prefix IP number
*00#070#00000#
eg: all add 1'st setting prefix IP number
*00#070#11111#
eg: A and B don't add IP number, C,D,E add 2'nd Prefix IP number *00#070#00222#
*00#080#
Clear Ban dial prefix, direct dialing and free number 10 groups respectively.
*00#081#
Ban dial prefix 10 groups Close ( default)
*00#082#
Ban dial prefix 10 groups Open
*00#083#
Call Long distance moble phone number prefix IP plus 0, eg.
17951+0+13880088008
*00#084# Call Long distance moble phone number prefix IP w/o 0 , eg.17951 +13880088008
*00#085#
Communication over and return to standby status (default).
*00#086#
Communication over, Must press Re-dial key to return to standby status
*00#089#
Cancel Auto lock SIM card ,change to Lock sim card Manually(default)
======================================================================
display"err---3"
// No SIM Card or can not find Sim card.
display"err---4"
// Pin Code is wrong.
display"ERR--08"
// The device is locked, can not work. Need to un
CK-8801 V1.1
Packing List
With the Fixed Wireless Terminal, there are some accessories. When you get the terminal please
check them and to see whether you have all of them. Please contact us or call the distributor in
your area to hand back the absent parts if you find that you lack one of them as below:
Name
AC- adapter
Special antenna
User Manual
Quantity
1pcs
1pcs
1pcs
Remark
DC12V/1A
English
Attentions
In order to protect your Terminal and make sure the terminal have a long using life, you should
pay attentions as below:
1. Youd better place the terminal in a safe place where the kids cannot be fetch, or the terminal
will hit the kids.
2. Please keep the terminal and the accessories dry and do not place the terminal in a dirty place,
or it will affect the use of the terminal.
3. Please use the terminal in a normal temperature. It will damage the using lift of the terminal if
the temperature is too high or too low.
4. Make sure that there is no water immerge the terminal, or it will short-circuit and leads the
perpetual damage of the terminal
5. Do not swab the terminal with the corrosive materials.

6. Do not open the terminal optionally. Please ask professional repairer for help if your terminal
was damaged.
7. Please use the special battery and adapter. Do not use the common battery and adapter instead
of the special battery and adapter.
8. Please charge the terminal if the terminal turns off automatically when you use the battery to
work..

GSM Pots Adapter

Uploaded by

Copyright:

Available Formats

GSM Pots Adapter

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GSM Pots Adapter

Uploaded by

Copyright:

Available Formats

CN2HK LIMITED

GSM Fixed Wireless Terminal

Please read this manual before operating this product.

Key Technical Specifications

Networks support: GSM 850/900/1800/1900MHz

Peak power consumption: 0.25W/0.5W

Receive sensitivity: -104db

Antenna increment: All directions: 5.0db

Stand by hours: 48 Hours

Multicolor backlight display (e.g.: blue, green)

Cautions and Storage

Connect the terminal

Installing the Antenna

Inserting a SIM Card

Connecting your terminal with desktop phone

Operation and Setting

Restore to factory setting

----Phone Lock (optional)

Charge for first 3 minutes

First 3 minutes fee rate: Outgoing call:0.ABRMB. Incoming call: 0.CD

AB CD EFG HIJ KLM NOP# Fee rate setting

0.AB RMB /minute

Other countries IDD

Set 1st IP number eg. *00#061#17951# IP number from 3 -13 digit.

5. Do not swab the terminal with the corrosive materials.

You might also like