Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 136 views

    TD62LM and TD62M Thermodynamic Steam Traps With Replaceable Seats (Screwed /socket Weld)

    Uploaded by

    Rupesh Desai
    The TD62LM and TD62M are maintainable high pressure thermodynamic steam traps with integral strainer and a replaceable seat to ease maintenance. They have been specifically designed for mains drainage applications up to 62 bar g. An insulating cover is fitted as standard to prevent the trap being unduly influenced by excessive heat loss when subjected to low outside temperatures, wind, rain etc.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    TD62LM and TD62M Thermodynamic Steam Traps With Replaceable Seats (Screwed /socket Weld)

    Uploaded by

    Rupesh Desai
    136 views2 pages
    The TD62LM and TD62M are maintainable high pressure thermodynamic steam traps with integral strainer and a replaceable seat to ease maintenance. They have been specifically designed for mains drainage applications up to 62 bar g. An insulating cover is fitted as standard to prevent the trap being unduly influenced by excessive heat loss when subjected to low outside temperatures, wind, rain etc.

    Original Title

    p068_08[1]

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The TD62LM and TD62M are maintainable high pressure thermodynamic steam traps with integral strainer and a replaceable seat to ease maintenance. They have been specifically designed for mains drainage applications up to 62 bar g. An insulating cover is fitted as standard to prevent the trap being unduly influenced by excessive heat loss when subjected to low outside temperatures, wind, rain etc.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    136 views2 pages

    TD62LM and TD62M Thermodynamic Steam Traps With Replaceable Seats (Screwed /socket Weld)

    Uploaded by

    Rupesh Desai
    The TD62LM and TD62M are maintainable high pressure thermodynamic steam traps with integral strainer and a replaceable seat to ease maintenance. They have been specifically designed for mains drainage applications up to 62 bar g. An insulating cover is fitted as standard to prevent the trap being unduly influenced by excessive heat loss when subjected to low outside temperatures, wind, rain etc.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    TI-P068-08

    ST Issue 8

    Cert. No. LRQ 0963008 ISO 9001

    TD62LM and TD62M Thermodynamic Steam Traps with replaceable seats (Screwed /Socket Weld)
    5 9 2 6 10 7 + 15 13 14 8

    Description

    The TD62LM and TD62M are maintainable high pressure thermodynamic steam traps with integral strainer and a replaceable seat to ease maintenance. They have been specifically designed for mains drainage applications up to 62 bar g. The TD62LM is specifically designed for relatively small condensate loads on superheat and mains drainage applications. An insulating cover is fitted as standard to prevent the trap being unduly influenced by excessive heat loss when subjected to low outside temperatures, wind, rain etc. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC. Certification This product is available with certification to EN 10204 3.1. Note: All certification / inspection requirements must be stated at the time of order placement.

    11

    Sizes and pipe connections Optional extras

    ", " and 1" screwed ends NPT. ", " and 1" socket weld ends to ANSI B 16.11 Class 3000.

    1 4

    An optional blowdown/depressurisation valve can be supplied at extra cost - please consult Spirax Sarco.

    12 3

    Pressure / temperature limits


    Temperature C Steam saturation curve Pressure bar g The product must not be used in this region. The product should not be used in this region or beyond its operating range as damage to the internals may occur. Body design conditions PMA Maximum allowable pressure TMA Maximum allowable temperature Minimum allowable temperature PMO Maximum operating pressure for steam service ANSI 600 103 bar g @ 93C 525C @ 42.7 bar g 0C 62 bar g @ 482C

    Materials
    No. 1 2 3 4 5 6 *7 8 9 10 11 12 13 14 Part Body Cover Strainer cap Strainer screen Insulating cover Disc Seat Cover studs Cover nuts Cover gasket Material Steel ASTM A217 Gr. WC 6 Steel ASTM A217 Gr. WC 6 Steel ASTM A217 Gr. WC 6 Stainless steel 100 mesh 316L Aluminium Chromium steel Chromium steel Steel ASTM A193 Gr. B16 Steel ASTM A194 Gr. 8M Spirally wound stainless steel with exfoliated graphite ller

    TMO Maximum operating temperature 525C @ 42.7 bar g Minimum operating temperature 0C Maximum operating TD62LM 50% of upstream pressure PMOB backpressure TD62M 80% of upstream pressure TD62LM 8 bar g Minimum operating pressure TD62M 1.4 bar g Designed for a maximum cold hydraulic test pressure of 155 bar g

    Name-plate Stainless steel Strainer cap gasket Reinforced exfoliated graphite Spirally wound stainless steel Inner seat gasket with exfoliated graphite ller Outer seat gasket Spirally wound stainless steel with exfoliated graphite ller

    Stainless steel * 15 Ferrule * Note: Item 15 (ferrule) is pressed into item 7 (seat).

    Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice.

    Copyright 2006

    Dimensions /weights (approximate) in mm and kg


    Size " " 1" A 80 80 85 B 92 92 100 C 92 92 92 D 52 52 47 E 20 20 20 F 51 51 51 Weight 2.08 2.08 2.43

    Spare parts

    The spare parts available are shown in solid outline. Parts drawn in broken line are not supplied as spares. Available spares Insulating cover Set of cover studs and nuts (set of 4) Seat and disc assembly Strainer screen 100 mesh Set of gaskets (packet of 3 sets) Strainer cap gasket (3 off) 5 8, 9 6, 7, 10, 13, 14, 15 4 10, 12, 13, 14 12

    F Withdrawal distance

    How to order spares Always order spares by using the description given in the column headed 'Available spares' and state the size and type of trap. Example: 1 - Strainer screen for a Spirax Sarco " TD62LM thermodynamic steam trap.

    A
    5

    B
    10

    E Withdrawal distance

    7 + 15
    14

    Capacities

    Condensate kg /h

    13
    8

    Minimum operating pressure 8 bar for the TD62LM Differential pressure bar (x 100 = kPa)

    Safety information, installation and maintenance


    For full details see the Installation and Maintenance Instructions (IM-P068-58) supplied with the product. Installation note: Preferably install in horizontal pipelines with the insulating cover uppermost although it can be fitted in other positions. After 24 hours in service the cover nuts should be checked for tightness. Disposal The product is recyclable no ecological hazard is anitcipated with the disposal of this product, providing due care is taken. 12

    Recommended tightening torques or Item No. mm 3 8 9 32 A /F M10 x 1.5 17 A /F

    Nm

    Example: 1 off Spirax Sarco " TD62LM thermodynamic steam trap with integral strainer having screwed NPT connections, suitable for steam main drainage. An aluminium insulating cover shall be fitted as standard.

    How to order

    142 - 158 20 - 25 45 - 50

    TD62LM and TD62M Thermodynamic Steam Traps with replaceable seats (Screwed / Socket Weld)

    TI-P068-08 ST Issue 8

    You might also like