Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 60 views

    EN Em-106

    Uploaded by

    Morosan Ionela
    The EM-106 is a brushless DC motor controller designed for hall-feedback motors from 12-36V supplying up to 5A. It supports 60 and 120 degree commutation and has direct or frequency locked driving modes. It provides adjustable current limiting, direction control, and braking. The controller is protected against overcurrent and reverse polarity with an inbuilt fuse.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    EN Em-106

    Uploaded by

    Morosan Ionela
    60 views2 pages
    The EM-106 is a brushless DC motor controller designed for hall-feedback motors from 12-36V supplying up to 5A. It supports 60 and 120 degree commutation and has direct or frequency locked driving modes. It provides adjustable current limiting, direction control, and braking. The controller is protected against overcurrent and reverse polarity with an inbuilt fuse.

    Original Description:

    electrotehica

    Original Title

    EN_em-106

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The EM-106 is a brushless DC motor controller designed for hall-feedback motors from 12-36V supplying up to 5A. It supports 60 and 120 degree commutation and has direct or frequency locked driving modes. It provides adjustable current limiting, direction control, and braking. The controller is protected against overcurrent and reverse polarity with an inbuilt fuse.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    60 views2 pages

    EN Em-106

    Uploaded by

    Morosan Ionela
    The EM-106 is a brushless DC motor controller designed for hall-feedback motors from 12-36V supplying up to 5A. It supports 60 and 120 degree commutation and has direct or frequency locked driving modes. It provides adjustable current limiting, direction control, and braking. The controller is protected against overcurrent and reverse polarity with an inbuilt fuse.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    EM-106 BRUSHLESS DC-MOTOR CONTROL UNIT 12-24V 5A

    FEATURES:
    Three phase output Direction change Hall-transducer supply and input Supports 60 and 120 commuting Adjustable current limit Direct or freq.locked driving High efficiency Inbuilt fuse Rail mounting base available

    EM-106 controller is designed for brushless hall-feedback DC-motors. The device uses mosfet-type power stage with high efficiency. EM-106 can be connected to 60- or 120 degrees commuting motor. Standard driving includes speed adjustment, stopping, direction change and braking. The controller can be installed using screws or a standard rail mounting base. There are two control modes: Within direct driving mode the motor voltage is set in proportion to the control voltage as with a normal DC-motor. Alternatively in frequency locked mode the controller uses the halltransducer signal to speed adjustment besides commuting. This mode gives very precise speed referenced to the control voltage. As an additional feature the controller has an adjustment for loop response so that it provides as stable control as possible within all applications. Control input can be scaled with a trim. The current limit is set with a trim, it restricts driving when motor current exceeds the given value. The controller is protected against reversed input voltage polarity and fuse protected against over current.

    TECHNICAL DATA: Supply voltage Idle current Control current Current limit Operating freq. Voltage loss /V Control voltage Control pot. Control input Hall-input Digital control Dimensions Weight 12...36 Vdc approx. 30 mA 5 A cont. 8A 50/50% 1...8 A 22 kHz 0,8 V (Im=5 A) 0...10 V 2...10k 10 V max (20 mA) 6,5 V on at Uin 3...30 V off at Uin 0...1 V or open 87*73*35 mm approx. 90 g
    10VDC 11

    EM-106 BLOCK DIAGRAM

    FUSE POWER REGUL. + 10 SUPPLY IN 1

    SPEED 12 SPEED SCALE 16 CONTROL LOGIC C POWER STAGE A I-LIM. 15 14 13 DISABLE DIRECTION BRAKE HALLINPUTS CURRENT MEAS. +6.5V C B A 60/120 GND 8 7 6 5 9 4 B 2 3 MOTOR

    DIRECT / LOCKED LOOP

    CLOSED LOOP CONTROL

    EM-106 OPERATING INSTRUCTIONS


    Operating voltage 12-36V filtered, less than 20% ripple. Speed control set with voltage or potentiometer. Range is adjustable with SCALE and ZERO trim. Speed control mode NORMAL or CLOSED LOOP is selected with SW1. Normal speed control: Motor acts like normal DC-motor without feedback. Closed loop control: The control unit uses a hall sensor signal to regulate motor speed. Accuracy of motor rpm is typically 1% in this mode. The desired rpm range in closed loop mode is selected with SW3. Synchro control: A SYNCHRO OUT feature can be used if phase locking loop (PLL) control ( clock accuracy, frequency control ) is needed. This control mode needs external PLLunit. Current limit adjust ( I-LIM ) limits the motor current ( torque ). Commutation phase of motor is selected with SW2. If disable and brake is selected simultaneously, brake has higher priority and activates.

    Connection example: control with pot. and switches NOTICE ! the brake should be connected to control voltage if not used.

    control gnd

    10V cont.

    direction

    disable

    FAULT INDICATION LED: -undervoltage, current limit, sensor fault or disable activated hole 3mm closed loop range / rpm
    0-6000 0-4000 0-2500
    SW2

    16 15 14 13 12 11 scale zero
    SW1

    speed

    brake

    SW3

    closed loop normal

    SYNCHRO OUT
    gnd

    pulse out (5V) 6pulses / rev. Molex connector.

    120

    60

    commutation select

    6.2V sens. supp.

    67mm
    fuse

    supply gnd (0V )

    I-lim
    3A 1A 8A

    1 2

    wh / red

    wh / blk

    wh / ye

    green

    white

    black

    blue

    red

    M
    81mm 87mm

    example motor MAE BM05112A069

    ELECTROMEN Oy Vhheikkilntie 56B, 20810 Turku, FINLAND

    supply 12-36vdc

    sensor gnd

    phase C

    phase B

    phase A

    sens. C

    sens. A

    sens. B

    10

    73mm

    Tel. +358-2-4693050 Fax. +358-2-4693052

    You might also like