NSN Ultra Bts Overview: Techvidhya:India'S No 1. Professional Telecom Training Institute
NSN Ultra Bts Overview: Techvidhya:India'S No 1. Professional Telecom Training Institute
NSN Ultra Bts Overview: Techvidhya:India'S No 1. Professional Telecom Training Institute
Ultra BTS
Power Supply DC (1-3) AC (1-2) TRX BB units (1-6) TRX RF units GSM (0-12) EDGE GSM (0-12) Receiver Multicouplers 2-way (0-6) 6-way (0-2) Base Operations and Interface Unit (1)
Transmission Units (1-4) Combiners & Duplex Filters duplexer(upto6) Combiner: (2 way)&(6 way)
BOIx unit
*It is known as Brain of BTS. It handles all the control functions like : *BTS initialization Operation & Maintenance *Software download(LMP port available) *Management of alarms *Logic control *Main clock function
Site Reset
13 MHz
Downlink signal processing (BB2x) unit In the downlink path, the BSC sends a signal through the Abis interface to the DTRUx unit, which passes the signal to the BB2x unit. The BB2x unit encodes the signal and reformats it as a GSM/EDGE TDMA burst. The BB2x unit then sends the signal to the TSxx unit. The TSxx unit modulates and amplifies the signal and sends it to the RF filter units. From those units, the signal goes to the antenna, which passes the signal over the Air interface to the Mobile Station (MS). Uplink Signal Processing (BB2A) unit In the uplink path, the TSxx unit samples the signal and sends the information, plus High-Level Data Link Coded (HDLC) status and alarm messages, to the BB2A. The BB2x unit then sends the processed signal to the DTRUx unit, which passes the signal through the Abis interface to the Base Station Controller (BSC).
BB2E and BB2F Uplink signal processing includes basic BB2A unit capabilities plus normal (NRX) and diversity (DRX) branch uplink interfaces in EDGE mode. While in EDGE mode, the BB2E and BB2F units use NRX for main RX data and the DRX line for diversity RX data. Downlink signal processing BB2x unit In the downlink path, the BSC sends a signal through the Abis interface to the DTRUx unit, which passes the signal to the BB2x unit. The BB2x unit encodes the signal and reformats it as a GSM/EDGE TDMA burst. The BB2x unit then sends the signal to the TSxx unit. The TSxx unit modulates and amplifies the signal and sends it to the RF filter units. From those units, the signal goes to the antenna, which passes the signal over the Air interface to the Mobile Station (MS).
10
11
13
15
17
18
Combiners It combines two transmitting signals of TRX card and generate one output. Combiners are of two types : 2 way (wide band combiner) 6 way (remote tune combiner)
19
20
21
The M2xA unit receives signals from the DVxx unit or the RTxx unit. The M2xA unit divides the signals into two outputs for the RX path and two outputs for the DRX path. The outputs feed the receivers of two TSxx units, and a BTS can accommodate a maximum of six M2xA units. The unit is used in most wideband combining or combining by-pass configurations.
22
23
24
25