GH Seminar
GH Seminar
GH Seminar
PRESENTATION PLAN
1. Introduction
INTRODUCTION
About Antenna:Wireless communication systems have developed rapidly in recent years. an antenna as a front component is required sometimes switchable ability. to have a wide band, good radiation performances and
Importance of Switchable ability:To obtain the switchable ability of the antenna, the concept
of a
reconfigurable
antenna
was
proposed
and
The
radar
3
system applications
Patch antenna:The patch antennas can reconfigure by cutting rectangular or half-circular slots Different types of slots in the patch element are used and their dimensions have been varied in order to observe the relationship between maximum attainable linear phase range and the loss performance
Microstrip Line Feed Coaxial Feed Aperture Coupled Feed Proximity Coupled Feed
Antenna Design
Simulation
Optimization
A frequency reconfigurable antenna A reconfigurable radiation pattern antenna A reconfigurable polarization antenna
Group 1: Antennas using switches Group 2: Antennas using capacitors or varactors Group 3: Antennas using physical angular
alteration
Group 4:Antennas using different biasing
networks
Group 5: Antenna arrays Group 6: Antennas using reconfigurable
8
Cognitive radio Plug and play reconfigurable satellites Multiple Input Multiple Output (MIMO) communication systems Cellular and personal communication systems Military applications
The frequency can be varied in three different steps. Both two diodes(D1 OFF , D2 OFF) are in off state One diode D1 is in ON and another diode D2 is in OFF state
10
W
w
l
D1
D2 s
11
12
13
W
w
l
D1
D2 s
14
15
16
W
w
l
D1
D2 s
17
18
19
made
conformal to host surface. Low fabrication cost, hence can be manufactured in large quantities.
Low Gain
Extraneous radiation from feeds and junctions Poor end fire radiator except tapered slot antennas Low power handling capacity. Surface wave excitation
21
CONCLUSIONS
In this seminar the first aspect is the design of reconfigurable antennas. These antennas are reviewed,
reconfiguration techniques and their applications are reviewed. And a implementation is presented and results are compared.
22
THANKS
23