Presented By: Rajesh M S (4mc04au013)

PRESENTED BY: RAJESH M S (4mc04au013)
Introduction
With lasting engine concept, the automakers are modernizing their I.C engines and vehicles to be more economical, environmental friendly and safer considering the gasoline shortage, the proposed emission norms and safety standards. Let us discuss the various modern trends in the internal combustion engines and automobiles.
The Trend
Will the internal combustion engine be able to cope with these challenges also in the future?
Exhaust emission Fuel Economy
Safety
Noise and
vibration
Current solutions
Direct fuel Injection Direct injection is where fuel is injected (directly) into the cylinders, not mixed with air in the inlet manifold or inlet ports before being drawn into the cylinders.
Advantages of Direct fuel injection

Due to multiple injections, uniform A/F mixture supplied to cylinder; thus difference in power developed in each cylinder is minimum. Noise and Vibration from the engine is less. Since the engine is controlled by ECU, accurate A/F mixture supplied resulting in complete combustion leading to effective utilization of fuel supplied and hence low emission
Some of the types of direct injection systems

MPFi Engine Multi Point Fuel Injection system. In this system each cylinder has number of injectors to supply/spray fuel into the cylinders . CRDi Engine Common Rail Direct injection system. In this system, all the injectors are supplied by a common fuel supply line or a manifold called the common rail.
Variable valve timing and lift

Principle is to use a twoposition advance or retard of either an engines intake or exhaust camshaft to better match the engines operating conditions.Two main factors that determine an I.C engine performance are The point at which valves open. The duration of the valves being open.
Some of the types of variable valve timing system

(Variable Valve-Timing and Lift Electronic Control) VTEC works by varying valve timing and lift to compensate for the time delay and out-of-phase arrival of the air-fuel charge at the intake valve. Shifts valve between two separate sets of cam lobesone for high-speed operation and one for low.
VTEC Engine
Advantages
Low fuel consumption appreciable increase in power lower tail pipe emission. Valvetronic system, which can continuously vary the opening stroke of the intake valves to optimize engine power and efficiency. reduces pumping losses
SUPER AND TURBO CHARGERS

Forcing more air into a cylinder allows more fuel to be burned, generating more power from an engine of a given weight and size; that's the basic idea behind super-charging and turbo-charging. Turbocharger After exhaust gases leave the cylinders, they pass into one of the chambers spinning turbine. As this turbine spins, it spins the turbine in the opposite chamber(compressor). As this compressor spins, it draws in outside air and forces it into the engine intake manifold and finally into the combustion chambers.
Supercharger The key difference between a turbocharger and a supercharger is its power supply. Something has to supply the power to run the air compressor. In a supercharger, there is a belt that connects directly to the engine. It gets its power the same way that the water pump or alternator does. Types of superchargers Roots type Twin screw type Centrifugal type
Advantages of super and turbo chargers

Turbochargers are light weight, mechanical simplicity and durability, uses engine exhaust, less fuel is consumed. Since the volume of exhaust gas is dependent upon engine load, The greater the load, the more the turbo boast. Superchargers are smaller and for lighter engine, easier to install Both help in contol of detonation
Hybrid engines
A hybrid propulsion system uses a petrol or diesel engine with an electric motor in some combination. One variation is to have the wheels driven only by the electric motor or motors, current coming from batteries. The petrol engine drives a generator to charge the batteries; it can be turned on and off as needed. Other variation is to have a relatively small petrol engine drive the wheels through a mechanical transmission. An electric motor provides assistance when high power is needed - overtaking and climbing hills.
Types and advantages of hybrid engines
Hybrid electric-petroleum vehicles Continuously outboard recharged electric vehicle (COREV) Hybrid fuel (dual mode) Fluid power hybrid
Advantages Lower emissions and better
mileage. Braking are configured to capture kinetic energy thus Batteries need not be charged by an external source. Reduce the dependency on fossil fuels which directely affects fuel prices.
Rotating Liner Engine

It is developed to reduce engine friction and increase fuel economy in Heavy Duty Engines. The cylinder liner rotates and a unique hydrodynamic face seal replaces the conventional head gasket. Thus over comings the piston ring-liner wear around TDC( due to low magnitude of sliding speed around) Advantages Improve efficiency and reduce fuel consumption. Prolong engine life.
Conclusion
Despite the green hype, internalcombustion engines with its latest and advanced technology will keep powering vehicles for the foreseeable future.
you

Presented By: Rajesh M S (4mc04au013)

Uploaded by

Copyright:

Available Formats

Presented By: Rajesh M S (4mc04au013)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Presented By: Rajesh M S (4mc04au013)

Uploaded by

Copyright:

Available Formats

PRESENTED BY: RAJESH M S (4mc04au013)

Exhaust emission Fuel Economy

Advantages of Direct fuel injection

Some of the types of direct injection systems

Variable valve timing and lift

Some of the types of variable valve timing system

SUPER AND TURBO CHARGERS

Advantages of super and turbo chargers

Types and advantages of hybrid engines

Advantages Lower emissions and better

Rotating Liner Engine

You might also like