RS46 SERIES

TECHNICAL GUIDE
www.til-hyster.in
 TRUCK DIMENSIONS

h4

h 3.1.2

h1

h6

Q h7
46-33 CH
h 3.1.1

m1 m1 m2
c x y
l1

l2

MAXIMUM CAPACITY CONTAINER

PICKING END TO END
20’ 40’
MODEL
kg kg
RS46-29 32,000 14,000
RS46-33 35,000 16,000
46-33 CH

100
3,048

46-33 CH

100
6,096

2
 TRUCK DIMENSIONS

½a

r1

A st V

Wa
r2

r1 = radius of swing of container rear corner

r2 = radius of swing of container front corner
Wa = outside turning radius of the truck
a = total operating clearance:
= 200 mm (100 mm each side acc. VDI)
see VDI line 4-34-3 & 4-34-4
V = (theoretical) 90 ~ stacking aisle width, no intrusive stacking
V = r 2 + the larger of r1 or Wa
½a
Ast = (practical) 90 ~ stacking aisle width, no intrusive stacking
and with clearance
Ast = V + a

b8
b2
b 1.20 b 10 b 11
b8

b 13

3
 RATED CAPACITIES AND STACKING HEIGHTS
(shown in 1,000 kg.)

RS 46-29 CH CONTAINER SPREADER RS 46-33 CH CONTAINER SPREADER

43
43 31 45
27 45
31 46 4-5
27 45 4-5 17 33 46
14 28 46
17 33 46 4-4
14 29 45 4-4 17 33 46
14 29 46
17 33 46 17 33 46
14 29 45 14 29 46
17 33 46 17 33 46 46-33 CH

14 29 45 14 29 46 46-33 CH

c3 c2 c1 c3 c2 c1
c3 c2 c1 c3 c2 c1
9‘6” containers 8‘6” containers
9‘6” containers 8‘6” containers

c1 c2 c3 Note: All load centres c1 , c 2, c 3 are taken from the front face of the (front) Tyres,
deduct 100mm for load centres taken from the front face of the stabiliser.
1865mm 3815mm 6315mm

HANDLING IN SECOND RAIL

r1 r2
1865mm 6315mm
46-33 CH

r2 r1

RS 46 FOR STEEL LOAD HANDLING

RS 46 FOR COIL HANDLING RS 46 FOR SLAB HANDLING

46-33 CH 46-33 CH

Note:
Special Attachments : Please get in touch with our Sales & Application team for more details.

4
 RS 46-29, RS 46-33, CONTAINER HANDLERS

1-1 Manufacturer HYSTER-TIL HYSTER-TIL

1-2 Model designation RS 46-29 CH RS 46-33 CH
1-3 Powertrain / drivetrain Diesel Diesel
1-4 Operator type Seated Seated
1-5-1 Load capacity at load centre distance c 1 without/with stabiliser (1) Q1 kg 46,000 n/a 46,000 n/a
1-5-2 Load capacity at load centre distance c 2 without/with stabiliser (1) Q2 kg 29,000 n/a 33,000 n/a
GENERAL

1-5-3 Load capacity at load centre distance c 3 without/with stabiliser (1) Q3 kg 14,000 n/a 17,000 n/a
1-6-1 Load centre distance c 1 (2) c1 mm 1,865 1,865
1-6-2 Load centre distance c 2 (2) c2 mm 3,815 3,815
1-6-3 Load centre distance c 3 (2) c3 mm 6,315 6,315
1-8 Load distance, ctr of drive axle to face of front Tyres/front of stabiliser x mm 835 n/a 835 n/a
1-9 Wheelbase y mm 6,200 6,200
1-10 Stacking height at first row (number x container height) # 5 x 9’ 6” 5 x 9’ 6”
2-1 Service weight kg 68,500 72,200
WEIGHT

2-2-1 Axle loading with load, front / rear at c1 kg 101,350 13,150 101,100 17,100
2-3-1 Axle loading without load, front / rear at c1 kg 35,300 33,200 35,000 37,200
3-1 Tyre type Pneumatic Pneumatic
3-2 Tyre size, front 18.00-25 40PR 18.00-25 40PR
3-3 Tyre size, rear 18.00-25 40PR 18.00-25 40PR
WHEELS

3-5 Wheels, number front / rear (X = driven wheels) x4 / 2 x4 / 2

3-6 Tread, front b 10 mm 3,703 3,703
3-7 Tread, rear b 11 mm 3,060 3,060
4-1 Boom angle minimum / maximum (°) 0 / 59 0 / 59
4-2 Height of boom lowered h1 mm 4,700 4,700
4-4-1 Lift height at load centre c1 (3) h 3.1 mm 15,260 15,260
4-4-2 Lift height at load centre c 2 (3) h 3.2 mm 13,850 13,850
4-5 Height, boom extended h4 mm 18,110 18,110
4-7 Height of overhead guard (cabin) h6 mm 3,720 3,720
4-8 Seat height to SIP (4) h7 mm 2,555 2,555
4-15 Height under Twistlock - lowered (3) h 13 mm 1,345 1,345
4-19 Overall length l1 mm 8,360 8,360
DIMENSIONS

4-20 Overall length including boom retracted l2 mm 11,873 11,873

4-21-2 Overall width across all of truck b2 mm 4,200 4,200
4-21-3 Overall width across spreader 20' b 1.20 mm 6,100 6,100
4-21-4 Overall width across spreader 40' b 1.40 mm 12,200 12,200
4-31 Ground clearance, lowest point m1 mm 285 285
4-32 Ground clearance, centre or wheelbase m2 mm 437 437
4-34-3 Aisle width: 20' container (5) Ast 20 mm 12,639 12,639
4-34-4 Aisle width: 40' container (5) Ast 40 mm 14,403 14,403
4-35 Outside turning radius Wa mm 8,420 8,420
PERFORMANCE CUMMINS QSM11 224KW STAGE IIIA ENGINE - TE 27
5-1 Travel speed with / without load km/h 20 23 20 23
5-2 Lifting speed with / without load m/s 0.25 0.48 0.25 0.48
5-3 Lowering speed with / without load m/s 0.46 0.45 0.46 0.45
PERFORMANCE

5-7 Gradeability - 1.6 km/h, with / without load (6) % 22 36 22 36

PERFORMANCE CUMMINS QSM11 250KW STAGE IIIA ENGINE - TE 32
5-1 Travel speed with / without load km/h 21 23 21 23
5-2 Lifting speed with / without load m/s 0.28 0.48 0.28 0.48
5-3 Lowering speed with / without load m/s 0.46 0.45 0.46 0.45
5-7 Gradeability - 1.6 km/h, with / without load (6) % 26 35 25 35

5
 POWERTRAINS

1-1 Manufacturer HYSTER-TIL HYSTER-TIL

GENERAL

1-2 Model designation RS46 CH RS46 CH

1-3 Powertrain / drivetrain Diesel Diesel

7-1 Engine manufacturer / model Cummins / QSM11 Cummins / QSM11

7-1a EPA / CE Tier compliance Tier 3 / Stage IIIA Tier 3 / Stage IIIA
7-2 Engine power output according to ISO 1585 kW 224 250
7-2-1 Engine power output - peak kW 224 272
7-3 Rated speed rpm 2,100 2,100
ENGINE

7-3-1 Engine torque @rpm (1/min) N-m 1,424 @ 1000 1,674 @ 900
7-4 Number of cylinders / displacement # / cm3 6 / 10,800 6 / 10,800
Turbocharger Type Wastegate, water cooled Wastegate, water cooled
7-8 Alternator output Amps 120 120
7-10 Battery voltage, rated capacity V / Ah 24 / 130 24 / 130

8-1 Drive control / transmission Type / # Hydrodynamic Transmission Hydrodynamic Transmission

8-2 Transmission manufacturer / type Type / # Spicer Off-Highway / TE-27 Spicer Off-Highway / TE-32
8-4 Transmission speeds forward / backward # 4/4 4/4
8-5 Coupling Type Torque Converter Torque Converter
DRIVE

8-6 Wheel drive / drive axle manufacturer / type Type / # Axletech PRC7545 / Kessler D102 Axletech PRC7545 / Kessler D102
8-11 Service brake Type Oil immersed (wet) disc Oil immersed (wet) disc
Spring applied, Spring applied, dry disc on
8-12 Parking brake Type dry disc on drive axle drive axle

9-1 Spreader manufacturer TIL / Elme (optional) TIL / Elme (optional)

9-3 Size of containers feet (´) ISO 20’ - 40’ ISO 20’ - 40’
SPREADER

9-4 Side shift b8 mm +800 / -800 +800 / -800

9-6-1 Rotation angle, without override ° +12 / -12 +12 / -12
9-6-2 Rotation angle, with override ° +185 / -95 +185 / -95

10-1 Operating pressure for attachments bar 140 140

10-2 Oil volume for attachments l/min 70 to 110 70 to 110
10-3 Hydraulic oil tank, capacity l 625 625
10-4 Fuel tank capacity l 830 830
MISC

10-5 Steering design Hydrostatic Hydrostatic

10-6 Number of steering rotation 6 6
10-7 Sound pressure level at driver’s seat (7) Lpaz dB(A) 75 75
10-7-1 Sound power level during the workcycle Lwaz dB 109 109

NOTES: NOTICE:
Specifications are affected by the condition of the vehicle and how it is equipped, as well Care must be exercised when handling elevated loads. Operators must be
as the nature and condition of the operating area. Inform your dealer of the nature and trained and must read, understand and follow the instructions contained in
condition of the intended operating area when purchasing your Hyster ® truck. the Operating Manual.

(1) Load capacities shown with mechanical pile slope (MPS) spreader. Deduction for All values are nominal values and they are subject to tolerances. For further
using powered pile slope spreader is approx. 900 kg information, please contact the manufacturer.
(2) From face of front Tyres. Hyster products are subject to change without notice.
(3) With Mechanical Pile Slope (MPS). For optional Powered Pile Slope (PPS) function:
Lift trucks illustrated may feature optional equipment. Values may vary with
deduct 310 mm.
alternative configurations.
(4) Full suspension seat in depressed position.
(5) Spreader at 8.0 m high, central above front axle; container 0 mm in front of Tyres;
includes 100 mm clearance.
(6) Gradeability figures provided for comparison of tractive performance, but are not
intended to endorse the operation of vehicle on the stated inclines.
(7) Add 2 dB(A) for option with additional cab fan.
NOTE: Specifications, unless otherwise listed, are for a standard truck without
optional equipment.
All capacities are according to EN1459.
All specifications and capacities are valid for trucks equipped with a Hyster TIL
container handling spreader for handling ISO containers. Specification data is based on VDI 2198.

6
 STANDARD AND OPTIONAL EQUIPMENT

PERFORMANCE STD OPT APPEARANCE STD OPT

Cummins QSM11 diesel engine rated 224 kW Stage IIIA Hyster yellow paint base truck and spreader X
X
wastegate turbocharger, water cooled Special paint base truck and spreader X
Cummins QSM11 diesel engine rated 250 kW Stage IIIA X ERGONOMICS STD OPT
wastegate turbocharger, water cooledd Powered partial-sliding cabin, including additional mirrors on top of fenders X
Hibernate Idle X Powered full-sliding cabin, including additional steps and handrails X
Hydraulically driven on-demand cooling fan X Isolated mounting for low noise and vibration X
120 amp alternator X Coat hook X
Powertrain protection system X Front, top and rear wipers X
Spicer Off-Highway TE-27 4-speed auto-shifting transmission X Front and rear window defrosters X
Spicer Off-Highway TE-32 4-speed auto-shifting transmission X Left side handrails, stairway and cabin door X
Axletech PRC7545 drive axle with wet disc brakes X RH side door X
Kessler D102 drive axle with wet disc brakes X Right side handrails and stairway X
DRIVE STD OPT Stair lights X
Traction speed limiter when carrying container (adjustable) X Multifunction display panel X
Traction speed limiter - unconditional (adjustable) X Seat-side joystick hydraulic control X
Steer axle with full stroke steer cylinder for tight turning radius X Steering wheel spinner knob X
Steer axle with reduced stroke steer cylinder for longer Tyre life X Directional control lever X
Premium E4 Pneumatic bias ply Tyres X Interior wide angle mirrors X
Pemium Slick bias ply Tyres X Telescoping & tilting steering column X
Premium Slick radial Tyres X Recirculation fan X
18.00-25 40PR drive and steer Tyres X DC/DC converter 24 volt/12 volt with socket X
LIFT STD OPT 2nd 12 volt socket X
On-demand load sensing hydraulic system X Accessory mounting post X
Automatic throttle-up when lifting (in neutral or inching) X Rear locking console in cab X
2-stage boom for 5-high 1st row stacking X Heated top window X
6-high 1st row stacking X "H"-pattern front wiper X
3B6 load moment Indicator with monochrome display X Air conditioning X
3B6 load moment Indicator with color display X Sun shades on top and rear X
High speed hoist system - below 10 tons X Radio preparation set-up (wiring, two speakers and antenna) X
Hydraulic system temperature protection X Reading light X
Container weighing system SOLAS compliant X Operator presence system X
HANDLING STD OPT Mechanical suspension seat X
TIL Spreader with rotation (CH models) X Air suspension seat X
Elme 817 Spreader with rotation (CH models) X Low backrest X
Mechanical Pile Slope X High backrest X
Powered dampening (for Elme Spreader) X Cloth seat cover X
4 lifting eyes located on end beam corners X Vinyl seat cover X
4 lifting eyes located under centre beam of spreader X Seat heating X
Container guides - located outside near twistlocks X 2-point high visibility seatbelt X
Rotation stops with override X 3-point high visibility seatbelt X
VISIBILITY STD OPT OPERATION STD OPT
External wide angle mirrors mounted on rear of front fenders X Electric air horn 112 dB X
External wide angle mirrors mounted on top of front fenders X Visible alarm – Amber strobe light, key switch activated X
Rear view camera system X Audible alarm – reverse direction activated 82–102 dB(A), self-adjusting X
Halogen work lights X Forward motion alarm X
LED work lights X Seatbelt interlock for engine start X
High Performance LED work lights X Seatbelt indicator light on top of cab X
LED twistlock indicator lights X Tyre pressure monitoring system X
LED stop/tail/brake lights X Lockable battery disconnect switch X
Turn signals, hazard & marker lights (LED) X Battery jump start connection (NATO plug) X
SUPPLEMENTAL STD OPT Adjustable automatic “empty seat” engine shutdown X
Literature package X Trainer seat X
Operator’s manual X Non-locking fuel cap X
Warranty: 12 months / 2,000 hours manufacturer’s warranty X Lockable fuel cap X
CE Certification X Hyster Tracker wireless asset management - monitoring X
Hyster Tracker wireless asset management - access / verification X
Auto greasing system for basic truck & outer boom X
Auto greasing system for inner boom and spreader X
24 volt electrical system X
Engine block heater 220 volt X
Steer wheel lug nut protection X
Engine compartment light X

7
STRONG PARTNERS. TOUGH TRUCKS
TM

FOR DEMANDING OPERATIONS, EVERYWHERE.

About Hyster
Hyster® supplies a complete range of warehousing equipment, IC and
electric counterbalanced trucks, container handlers and reach stackers.
Their network of highly trained dealers provides expert, responsive
local support by way of cost-effective finance packages and effectively
managed maintenance programs to ensure that the customer gets the
best possible value for money. Their aim is to offer a complete partnership
capable of responding to the full spectrum of material handling needs –
whether professional consultancy on fleet management, fully qualified
service support, or reliable parts supply.

About TIL
TIL Limited – a leading provider of infrastructure equipment in India
since 1944 – has an exclusive partnership with Hyster-Yale Group, Inc.
for marketing a comprehensive range of high capacity forklift trucks,
empty & laden container handlers and reach stackers to customers in
India, Nepal and Bhutan, duly supported by an integrated after-sales
support. The partnership between Hyster® and TIL represents the
synergy between two leading companies with complementary strategic
visions and product technologies, reinforced by a shared commitment to
enhance customer profitability.

Cutting Edge Technology

TIL’s state-of–the-art manufacturing facilities located in Kamarhatty and Kharagpur, West Bengal, include fully equipped machine shops,
fabrication and assembly shops, finishing bays and test beds. The research & development center has the latest CAD / CAM facilities and
engineering software. The modern structural fabrication shop is equipped with automatic machines and the processes conform to ISO
3834, AWS D14.3 & others. At TIL, quality is engineered to predetermined process parameters. TIL is committed to setting higher & higher
benchmarks in product quality. This commitment is reflected in the ISO 9001 Certification from Bureau Veritas Quality International.

24X7 Service. Anytime, Anywhere.

The 24X7 product support service offered by TIL – right from the installation and commissioning of equipment to the maintenance, repair
works and training of operators for the efficient functioning of equipment – helps the customer to reduce equipment downtime and enhance
productivity.
The HYSTER TIL® ReachStacker has become a preferred choice of customers by virtue of its exemplary uptime, superior handling speed,
outstanding maneuverability and unrestricted stacking capabilities.

TIL Limited
CIN: L74999WB1974PLC041725
Registered & Corporate Office:
1, Taratolla Road, Garden Reach, Kolkata - 700024
Phone: + 91 33 2469 3732-6 / 6497 | 6633 2000 / 2845
Fax: + 91 33 2469 2143 / 3731
Email: Mhg.Er@tilindia.com | mktg-til@tilindia.com

CHENNAI DELHI NCR DELHI KAMARHATTY

TIL Limited Plot 11, Site No.IV TIL Limited TIL Limited
Jhaver Plaza, 7th Floor 1-A, Sahibabad Industrial Area 302 Ansal Bhawan 517, Barrackpore Trunk Road
Nungambakkam High Road Ghaziabad 201 010 U.P. 16, Kasturba Gandhi Marg, New Delhi 110 001 Kolkata 700 058
Chennai 600 034, Tamil Nadu Phone: +91 120 277 8735 / 8736 / 7468 Phone: +91 11 2331 1607 / 8046 / 9248 Phone: +91 33 2553 1352 / 1882 | 6633 4000
Phone: +91 44 6670 3000 / 3010 Fax: +91 120 277 7467 2335 0250 / 0255 Fax: +91 33 2553 2546 / 5971
Fax: +91 44 2827 9681 Email: MHGMarketing.Sahibabad@tilindia.com Fax: +91 11 2331 3263 Email: MktDept.KMT@tilindia.com | til.kmt@tilindia.com
Email: chennai.til@tilindia.com mhscs.Sahibabad@tilindia.com Email: til.delhi@tilindia.com

KHARAGPUR MUMBAI
Copyright © 2019 TIL Limited. All Rights Reserved

TIL Limited TIL Limited 1800 266 1535

Toll Free No:
Vill. & P.O. Changual, Kharagpur A - 606, A Wing, 6th Floor, 215 Atrium, Andheri - Kurla Road,
Dist: Paschim Medinipur 721 301 Andheri (East), Mumbai 400059, Maharashtra
Email: mktg-til@tilindia.com
West Bengal Phone: + 91 22 4969 1169 www.til-hyster.in
Phone: +91 32 2266 1101 Mobile: +91 8850971609
Email: Mumbai.TIL@tilindia.com | Mumbai.Custsupp@tilindia.com www.tilindia.in

Hyster TIL products are subject to change without notice. Products illustrated may feature optional equipment. Technical Specification Hyster-TIL / RS46 SERIES / 1119.
This cancels Technical Specification Hyster-TIL / RS46 SERIES / 0519
HYSTER, , and HYSTER TIL are trademarks of Hyster-Yale Group, Inc. TIL is a trademark of TIL Limited.