Metalurgi Fisik

Types of Materials
Metals:
Metals are elements that generally have good electrical and thermal
conductivity.
Many metals have high strength, high stiffness, and have good ductility.
Some metals, such as iron, cobalt and nickel are magnetic.
At extremely low temperatures, some metals and intermetallic compounds
become superconductors.
Pure metals:
Pure metals are elements which comes from a particular area of the periodic
table. Examples of pure metals include copper in electrical wires and
aluminum in cooking foil and beverage cans.
Metal Alloys:
Metal Alloys contain more than one metallic element. Their properties can be
changed by changing the elements present in the alloy. Examples of metal
alloys include stainless steel which is an alloy of iron, nickel, and chromium;
and gold jewelry which usually contains an alloy of gold and nickel.
The most important properties of metals include density, fracture toughness,
strength and plastic deformation. The atomic bonding of metals also affects
their properties. In metals, the outer valence electrons are shared among all
atoms, and are free to travel everywhere. Since electrons conduct heat and
electricity, metals make good cooking pans and electrical wires.
Many metals and alloys have high densities and are used in applications
which require a high mass-to-volume ratio.
Some metal alloys, such as those based on Aluminum, have low densities
and are used in aerospace applications for fuel economy.
Many metal alloys also have high fracture toughness, which means they can
withstand impact and are durable.
Polymers
A polymer has a repeating structure, usually based on a carbon backbone. The
repeating structure results in large chainlike molecules.
Polymers are useful because they are lightweight, are corrosion resistant, are easy
to process at low temperatures, and are generally inexpensive.
Ceramics
A ceramic is often broadly defined as any inorganic nonmetallic material. Examples of
such materials can be anything from NaCl (table salt) to clay (a complex silicate).
Some of the useful properties of ceramics and glasses include high melting
temperature, low density, high strength, stiffness, hardness, wear resistance, and
corrosion resistance. Many ceramics are good electrical and thermal insulators.
Glasses
A glass is an inorganic nonmetallic material that does not have a crystalline structure.
Such materials are said to be amorphous.
Examples of glasses range from the soda-lime silicate glass in soda bottles to the
extremely high purity silica glass in optical fibers.
Composites
Composites are formed from two or more types of materials. Examples include
polymer/ceramic and metal/ceramic composites.
Composites are used because overall properties of the composites are superior to
those of the individual components. For example: polymer/ceramic composites have
a greater modulus than the polymer component, but aren't as brittle as ceramics.
Heat Treatment of Steel

Various types of heat treatment processes are used to change the following
properties or conditions of the steel:
Improve the toughness
Increase the hardness
Increase the ductility
Improve the machinability
Refine the grain structure
Remove the residual stresses
Improve the wear resistance
The following are the general reasons for heat treatment:
Hardening (Steels can be heat treated to high hardness and strength
levels. The reasons for doing this are obvious. Structural components
subjected to high operating stress need the high strength of a hardened
structure. Similarly, tools such as dies, knives, cutting devices, and forming
devices need a hardened structure to resist wear and deformation.)
Tempering (As-quenched hardened steels are so brittle that even slight
impacts may cause fracture. Tempering is a heat treatment that reduces the
brittleness of a steel without significantly lowering its hardness and strength.
All hardened steels must be tempered before use.)
Heat Treatment of Steel

Softening a Hardened Structure (Hardening is reversible. If a hardened
tool needs to be remachined, it may be softened by heat treatment to return
it to its machinable condition. Most steels weld better in their soft state than
in their hardened state; softening may be used to aid weldability.)
Recrystallization (If a metal is cold worked, grains or crystals deform,

become elongated, and in doing so harden and strengthen a metal. There is
a limiting amount of cold work that a particular metal can be subjected to. In
rolling of steel into thin sheets, you can only reduce the cross-sectional area
so much before it gets too hard to roll. At this point it would be desirable to
return the grains to their original shape. Heat treatment can accomplish this.
The transformation of cold-worked grains to an undistorted shape is called
recrystallization. Very large coarse grains can also be refined by
recrystallization.This type of heat treatment is essential if a steel is to be
subjected to severe cold working in rolling, drawing, etc.)
Stress Relief (One of the most frequent reasons for heat treatment is to
remove internal stress from a metal that has been subjected to cold working
or welding. Stress relieving is a heat treatment used to remove internal
strains without significantly lowering the strength. It is used where close
dimensional control is needed on weldments, forgings, castings, etc.)
Hot-Working Operations (Most metal shapes produced by steel mills are

at least rough shaped at elevated temperatures. Heat treating is required to
bring the rough metal shapes to the proper temperature for hot-forming
operations.Forging, hot rolling, roll welding, and the like are all performed at
temperatures of sufficient magnitude as to prevent the formation of distorted
grains that will harden the metals. Hot-working operations require dynamic
recrystallization which is achieved by working at the proper hot-work
temperatures.)
Diffusion of Alloying Elements (One of the criteria for hardening a steel
is that it have sufficient carbon content. Low carbon steels can be hardened,
at least on the surface, by heat treating at an elevated temperature in an
atmosphere containing an alloying element that will diffuse into the steel and
allow surface hardening on quenching. Carbon is frequently diffused into the
surface of soft steels for surface hardening. Using this same principle,
elements such as chromium, boron, nitrogen, and silicon can be diffused in
the surface of a steel for special purposes.)
Figure 1 shows major types of heat treatment processes.
Figure 1. Types of Heat Treatment Methods

Metalurgi Fisik

Uploaded by

Copyright:

Available Formats

Metalurgi Fisik

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Metalurgi Fisik

Uploaded by

Copyright:

Available Formats

Types of Materials

Heat Treatment of Steel

Heat Treatment of Steel

Recrystallization (If a metal is cold worked, grains or crystals deform,

Hot-Working Operations (Most metal shapes produced by steel mills are

Figure 1. Types of Heat Treatment Methods

You might also like