Packer Model Standard
Packer Model Standard
Packer Model Standard
Self-Sealing
Compression
Expansion
Integral
Category Code
Combined
Fixed Method
liner support
hookwall
bi-directional slip
anchoring
Setting Method
pipe releasing
pipe turning
self-sealing
hydraulic
RIH
thermal
Unseating Method
pipe releasing
pipe turning
self-sealing
hydraulic
RIH
thermal
6
1
2. Y211
2.1 Features & Application
Application
Y211 can be widely used for zonal injection,
extraction, squeeze, acid treatment and well testing.
Features
Safe and reliable for setting in most cases
The sealing system is composed of three rubber sleeves with
two different hardness.
Setting and unsetting by pipe releasing, easy to operation
2. Y211
2.2 Working principle
Setting
when going down the well, the control pin is at the short track. Pull the column
up to content height when the packer has reached desired position, then lower the
column and make the control pin tangential direction to long track. The slip
extends and blocks in tube wall.
Unsetting
Pull column barrel up to make the slip reset.
2. Y211
2.3 Main technical parameters
Specification
Y211-114
Y211-145
Length
720
1100
Max. OD
114
145
Min. ID
62
62
8-25
8-25
Unsetting load
70-100
100-120
W.T.
150
150
Connection thread
2-7/8 TBG
2-7/8 TBG
3. Y341
3.1 Features & Application
Application
Y341 are usually used with water distribution system
for zonal injection, acid treatment and squeeze etc.
Features
Double-piston, low-pressure set explored, good sealing
Highly temperature -resistance and pressure-resistance glue
tubing explored, stable, widely used.
Reasonable-design, high-pressure, overturn well-flushing with
large emission
Straight pull release, easy to operate and stable
5
3. Y341
3.2 Working principle
Setting
Landing the packer to the reserved position in the well, pressure out in tubing, the
piston moves up, and the pin is cut off, then the lock sets move up and the element
is compressed. At the same time, the lock set ang lock ring lock each other, so that
the element can not be recycled. During the process, seal the tubing annulus, the
setting is completed.
Unsetting
Lift the string, cut off the pin with the friction between element and the casing,
the lock ring is without limit. The lock ring and lock set move down and release
the stuck under the element back strech, and the packer is released.
3. Y341
3.3 Main technical parameters
Specification
Y341-114
Y341-148
Length
1230
1760
OD
115
148
ID
50
62
14-16
14-16
W.P.
35
25
Unsetting load
30-40
40-50
W.T.
120
120
Connection thread
2-7/8 TBG
2-7/8 TBG