3 Methods of Electric Heating

Methods of Electric Heating
Heat can be generated by passing the current through a

resistance or induced currents. The initiation of an arc
between two electrodes also develops heat. The
bombardment by some heat energy particles such as , ,
, and x-rays or accelerating ion can produce heat on a
surface.
Electric heating can be broadly classified as follows .
(i) Direct resistance heating

In this method, the electric current is made to pass through the
charge (or) substance to be heated. This principle of heating is
employed in electrode boiler.
(ii) Indirect resistance heating

In this method, the electric current is made to pass through a wire or
high-resistance heating element, the heat so developed is transferred to
charge from the heating element by convection or radiation. This method
of heating is employed in immersion water heaters.
CLASSIFICATION OF ELECTRICAL HEATING
Infrared (or) radiant heating

the heat energy is transferred from source (incandescent lamp) and focused
upon the body to be heated up in the form of electromagnetic radiations.
Appli - for drying clothes in the textile industry and to dry the wet paints on
an object.
Direct arc heating
by striking the arc between the charge and the electrodes, the heat so
developed is directly conducted and taken by the charge. The furnace
operating on this principle is known as direct arc furnaces. Application production of steel.
Indirect arc heating
arc is established between the two electrodes, the heat so developed is
transferred to the charge (or) substance by radiation. The furnaces operating
on this principle are known as indirect arc furnaces. Application - melting of
non-ferrous metals.
Direct induction heating
currents are induced by electromagnetic action in the charge to be heated.
These induced currents are used to melt the charge in induction furnace.
Indirect induction heating
eddy currents are induced in the heating element by electromagnetic action.
Thus, the developed heat in the heating element is transferred to the body
(or) charge to be heated by radiation (or) convection. App- in induction
furnaces used for the heat treatment of metals.
Dielectric heating
RESISTANCE HEATING
When the electric current is made to pass through a
high-resistive body (or) substance, a power loss takes
place in it, which results in the form of heat energy,
i.e., resistance heating is passed upon the I2R effect.
This method of heating has wide applications such as
drying, baking of potteries, commercial and domestic
cooking, and the heat treatment of metals such as
annealing and hardening. In oven where wire
resistances are employed for heating, temperature up
to about 1,000C can be obtained.
The resistance heating is further classified as:
direct resistance heating,
indirect resistance heating, and
infrared (or) radiant heating
DIRECT RESISTANCE HEATING
In this method, electrodes are immersed in a material or

charge to be heated. The charge may be in the form of
powder, pieces, or liquid. The electrodes are connected
to AC or DC supply as shown in Fig.(a). In case of DC or
1- AC, two electrodes are immersed and three
electrodes are immersed in the charge and connected to
supply in case of availability of 3- supply. When metal
pieces are to be heated, the powder of lightly resistive is
sprinkled over the surface of the charge (or) pieces to
avoid direct short circuit. The current flows through the
charge and heat is produced in the charge itself. So, this
method has high efficiency. As the current in this case is
not variable, so that automatic temperature control is not
possible. This method of heating is employed in salt bath
furnace and electrode boiler for heating water
SALT BATH FURNACE

This type of furnace consists of a bath
and containing some salt such as molten
sodium chloride and two electrodes
immersed in it.
Such salt have a fusing point of about
1,0001,500C depending upon the type
of salt used. When the current is passed
between the electrodes immersed in the
salt, heat is developed and the
temperature of the salt bath may be
increased. Such an arrangement is known
as a salt bath furnace.
In this bath, the material or job to be
heated is dipped. The electrodes should
be carefully immersed in the bath in such
a way that the current flows through the
salt and not through the job being
heated. As DC will cause electrolysis so,
The resistance of the salt decreases with increase in the temperature
low-voltage AC up to 20 V and current up
of the salt, therefore, in order to maintain the constant power input,
to 3,000 A is adopted depending upon
the voltage can be controlled by providing a tap changing
the type of furnaces.
transformer. The control of power input is also affected by varying
the depth of immersion and the distance between the electrodes.
ELECTRODE BOILER
It is used to heat the water

by
immersing
three
electrodes in a tank as
shown in Fig.2. This is
based on the principle that
when the electric current
passed through the water
produces heat due to the
resistance offered by it.
For DC supply, it results in
a lot of evolution of H2 at
negative electrode and O2
at
positive
electrode.
Whereas AC supply hardly
results
in boiler
any evolution
of
Electrode
tank is earthed
solidly and connected to the
gas,
but Aheats
the
water. is usually incorporated to make and
ground.
circuit
breaker
break all poles simultaneously and an over current protective
device is provided in each conductor feeding an electrode

3 Methods of Electric Heating

Uploaded by

Copyright:

Available Formats

3 Methods of Electric Heating

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3 Methods of Electric Heating

Uploaded by

Copyright:

Available Formats

Methods of Electric Heating

Heat can be generated by passing the current through a

(i) Direct resistance heating

(ii) Indirect resistance heating

CLASSIFICATION OF ELECTRICAL HEATING

Infrared (or) radiant heating

DIRECT RESISTANCE HEATING

In this method, electrodes are immersed in a material or

SALT BATH FURNACE

It is used to heat the water

You might also like