Analog Digital Transmission
Analog Digital Transmission
Analog Digital Transmission
ANALOG
ANALOG DATA
For example, telephones take sound vibrations and turn
them into electrical vibrations of the same shape before
they are transmitted over traditional telephone lines.
Radio wave transmissions work in the same way.
Computers, which handle data in digital form, require
modems to turn signals from digital to analog before
transmitting those signals over communication lines such
as telephone lines that carry only analog signals. The
signals are turned back into digital form (demodulated) at
the receiving end so that the computer can process the
data in its digital format.
DIGITAL
DIGITAL DATA
This is the principle behind compact discs (CDs). The
music itself exists in an analog form, as waves in the air,
but these sounds are then translated into a digital form
that is encoded onto the disk. When you play a compact
disc, the CD player reads the digital data, translates it
back into its original analog form, and sends it to the
amplifier and eventually the speakers.
Internally, computers are digital because they consist of
discrete units called bits that are either on or off. But by
combining many bits in complex ways, computers
simulate analog events. In one sense, this is what
computer science is all about.
Bandwidth
Categories of Noise.
1) Johnson-Nyquist noise (sometimes thermal noise, Johnson
noise or Nyquist noise) is the noise generated by the equilibrium
fluctuations of the electric current inside an electrical conductor,
which happens without any applied voltage, due to the random
thermal motion of the charge carriers (the electrons).
Categories of Noise.
2) Intermodulation or intermod is the result of two radio
signals of different frequencies being mixed together,
forming additional signals at frequencies that are not at
harmonic frequencies (integer multiples) of either.
3) Crosstalk (XT) has the following meanings:
Undesired capacitive, inductive, or conductive coupling
from one circuit, part of a circuit, or channel, to another.
Any phenomenon by which a signal transmitted on one
circuit or channel of a transmission system creates an
undesired effect in another circuit or channel.
CATEGORIES OF CABLE
STP
Shielded twisted-pair(STP)
Shielded twisted-pair cabling consists of one
or more twisted pairs of cables enclosed in a
foil wrap and woven copper shielding. first
cable type used with IBM Token Ring. Early
LAN designers used shielded twisted-pair
cable because the shield further reduces the
tendency of the cable to radiate EMI and thus
reduces the cables sensitivity to outside
interference.
UTP
UTP
UTP cable is available in the following five grades, or categories:
Categories 1 and 2. These voice-grade cables are suitable only for voice
and for low data rates (below 4 Mbps). Cate-gory 1 was once the standard
voice-grade cable for telephone systems. The growing need for data-ready
cabling systems, however, has caused Categories 1 and 2 cable to be
supplanted by Category 3 for new installations.
Category 3. As the lowest data-grade cable, this type of cable generally is
suited for data rates up to 10 Mbps. Some innovative schemes, however,
enable the cable to support data rates up to 100 Mbps. Category 3, which
uses four twisted-pairs with three twists per foot, is now the standard cable
used for most telephone installations.
Category 4. This data-grade cable, which consists of four twisted-pairs, is
suitable for data rates up to 16 Mbps.
Category 5. This data-grade cable, which also consists of four twisted-pairs,
is suitable for data rates up to 100 Mbps. Most new cabling systems for 100
Mbps data rates are designed around Category 5 cable.
Coaxial cables
Coaxial cables were the first cable types used in LANs. coaxial cable
gets its name because two conductors share a common axis; the cable
is most frequently referred to as a coax. he components of a coaxial
cable are as follows:
A center conductor, although usually solid copper wire, sometimes is
made of stranded wire.
An outer conductor forms a tube surrounding the center conductor. This
conductor can consist of braided wires, metallic foil, or both. The outer
conductor, frequently called the shield, serves as a ground and also
protects the inner conductor from EMI.
An insulation layer keeps the outer conductor spaced evenly from the
inner conductor.
A plastic encasement (jacket) protects the cable from damage.
Coaxial cable
1) Thinnet is a light and flexible cabling medium that is inexpensive and
easy to install.
2) Thicknetbig surpriseis thicker than Thinnet. Thicknet coaxial cable
is approximately 0.5 inches (13 mm) in diameter. Because it is thicker and
does not bend as readily as Thinnet, Thicknet cable is harder to work with.
A thicker center core, however, means that Thicknet can carry more signals
a longer distance than Thinnet. Thicknet can transmit a signal approximately
500 meters (1650 feet). Thicknet cable is sometimes called Standard
Ethernet (although other cabling types described in this chapter are used for
Ethernet also). Thicknet can be used to connect two or more small Thinnet
LANs into a larger network.
Because of its greater size, Thicknet is also more expensive than Thinnet.
Thicknet can be installed safely outside, running from building to building.
DTE
DTE is an abbreviation for Data Terminal Equipment.
An end instrument that converts user information into signals for
transmission or reconverts the received signals into user
information.
The functional unit of a data station that serves as a data source or
a data sink and provides for the data communication control function
to be performed in accordance with link protocol.
The data terminal equipment (DTE) may be a single piece of
equipment or an interconnected subsystem of multiple pieces of
equipment that perform all the required functions necessary to
permit users to communicate.
A user interacts with the DTE, or the DTE may be the user. The DTE
interacts with the data circuit-terminating equipment (DCE).
Usually, the DTE device is the terminal (or computer), and the DCE
is a modem.Insert contents.
DCE
DCE-Data Circuit-Terminating Equipment
DCE is an abbreviation for Data Circuit-Terminating Equipment and its synonyms are
Data Communications Equipment and Data Carrier Equipment.
In a data station, the equipment that performs functions, such as signal conversion
and coding, at the network end of the line between the data terminal equipment (DTE)
and the line, and that may be a separate or an integral part of the DTE or of
intermediate equipment.
The interfacing equipment that may be required to couple the data terminal
equipment (DTE) into a transmission circuit or channel and from a transmission circuit
or channel into the DTE.
Data Communications Equipment (DCE) is a device that communicates with a Data
Terminal Equipment (DTE) device in RS-232C communications.
Usually, the DTE device is the terminal (or computer), and the DCE is a modem.
When two devices that are both DTE or both DCE that must be connected together
without a modem or a similar media translater between them, a NULL modem must
be used
Methods of Synchronization
Synchronous Transmission
In synchronous transmission, the stream of data to be transferred is
encoded as fluctuating voltages on one wire, and a periodic pulse of
voltage is put on another wire that tells the receiver "here's where
one bit/byte ends and the next one begins".
Asynchronous Transmission
In asynchronous transmission, there is only one wire/signal carrying
the transmission. the transmitter sends a stream of data and
periodically inserts a certain signal element into the stream which
can be "seen" and distinguished by the receiver as a synch signal.
Obviously, the term "asynchronous" is misleading in its literal
interpretation and must be understood as a term which is dictated
by conventional usage.
Half-duplex
A half-duplex system allows communications in both directions, but only one
direction at a time (not simultaneously). Any radio system where you must
use "Over" to indicate the end of transmission, or any other procedure to
ensure that only one party broadcasts at a time would be a half-duplex
system.
A good analogy for a half-duplex system would be a one lane road with
traffic controllers at each end. Traffic can flow in both directions, but only
one direction at a time with this being regulated by the controllers. Can be
describe as a walkie-talkie system also.
Full-duplex
A full-duplex system allows communication in both directions, and unlike
half-duplex allows this to happen simultaneously. Most telephone networks
are full duplex as they allow both callers to speak at the same time.
A good analogy for a full-duplex system would be a two lane road with one
lane for each direction.
Multiplexing
Time-Division Multiplexing
Time-Division Multiplexing
Time-division multiplexing (TDM) divides a channel into time slots that are allocated to the data
streams to be transmitted, as illustrated below :
If the sender and receiver agree on the time-slot assignments, the receiver can easily recover
and reconstruct the original data streams.
TDM transmits the multiplexed signal in baseband mode. Interestingly, this process makes it
possible to multiplex a TDM multiplexed signal as one of the data channels on an FDM system.
Conventional TDM equipment utilizes fixed-time divisions and allocates time to a channel,
regardless of that channels level of activity. If a channel isnt busy, its time slot isnt being
fully utilized. Because the time divisions are programmed into the configurations of the
multiplexors, this technique often is referred to as synchronous TDM.
If using the capacity of the data medium more efficiently is im-portant, a more sophisticated
technique, statistical time-division multiplexing (StatTDM), can be used. A stat-mux uses the timeslot technique but allocates time slots based on the traffic demand on the individual channels, as
illustrated below:
Notice that Channel B is allocated more time slots than Channel A, and that Channel C is
allocated the fewest time slots. Channel D is idle, so no slots are allocated to it. To make this
procedure work, the data transmitted for each time slot includes a control field that identifies the
channel to which the data in the time slot should be assigned.
Time-Division Multiplexing
Frequency-Division Multiplexing
Frequency-Division Multiplexing
Frequency-Division Multiplexing
FINISH