Sarvajanik College OF Engineering and Technology

SARVAJANIK COLLEGE
OF
ENGINEERING AND
TECHNOLOGY
Topic: RYield
Submitted to: Prepared By:

Prof. Ashish Parmar Desai Sachi (140420105008)
Prof. Anand Upadhyay
RYield
RYield models a reactor by specifying reaction yields of each

component. This model is useful when:
Reaction stoichiometry and kinetics are unknown.
Yield distribution data or correlations are available.
Working with RYield
Use RYield to model a reactor when:
Reaction stoichiometry is unknown or unimportant.
Reaction kinetics are unknown or unimportant.
Yield distribution is known.
You must specify the yields (per mass of total feed, excluding
any inert components) for the products or calculate them in a
user-supplied Fortran subroutine. RYield normalizes the yields
to maintain a mass balance. RYield can model one-, two-, and
three-phase reactors.
Ryield Setup Sheet
Use this sheet to specify yields for product components, or to
specify how to calculate yields.
If you select Component yields option, you must specify
component yields and the basis for these yields. You can
specify yields either as moles of a component per unit mass of
total feed or as mass of a component per unit mass of total
feed. When you select the Component yields option, you can
also specify one or more inert components.
If you select Component mapping, you must specify the
component mapping on the Comp. Mapping sheet.
If you select Petro characterization, you must specify data on
the Assay Analysis form to re-characterize the assay or blend.
Ryield Componant Mapping Sheet
Use this sheet to specify component mapping if you selected
the component mapping option on the Yield sheet. For each
component.
For a lumping reaction, specify a list of reactants which are
lumped to form the selected product. Also specify a coefficient
for each reactant which indicates the weight fraction of that
reactant which is converted to the product.
For a delumping reaction, the selected reactant delumps into a
specified list of product components. Also specify a coefficient
for each product which represents the weight fraction of the
reactant which is converted to that product.
Click New to add a new lumping/delumping reaction, or select
an existing reaction and click Edit to edit it, or click Delete to
delete it.
RYield Assay Analysis Form
Usethis sheet To specify

Options Pseudocomponent and petroleum property
characterization
Dist Curve Distillation curves
Gravity Bulk gravity or gravity curves
Molecular Wt Bulk molecular weight or molecular weight curve
Petro Property curves
Properties
Viscosity Viscosity curves
Subroutine User subroutine information for petroleum
characterization
Block Options Form
Properties
Property options and electrolytes calculation options / petroleum
calculation options wherever applicable
Simulation Options
Simulation calculation options
Diagnostics
Diagnostic message levels
EO Options
Options for equations-oriented solutions
EO Var / Vec
Sequential-modular variables to expose as equation-oriented variables
Report Options
Information to include or suppress from the generated report
Block Options Simulation Options Sheet
Use this sheet to specify whether heat balance calculations are
to be performed around the block. This sheet does not contain
the check box to exclude or include heat balance calculations
if energy balances are already done as part of block
calculations.
Also use this sheet to specify the algorithm for exit flashes and
mixed inlet flashes.
For RYield only, there is an option to check the atom balance.
This check cannot be performed when there are components
with ATOMNO & NOATOM missing. When there are non-
conventional component flows, the check is performed only
for ULTANAL elements.
Block Options Diagnostics Sheet
Use this To specify
Simulation Simulation error level
Property Physical property error level
Stream Stream diagnostics level
On screen Control panel message level

RYield Results Form
Use this sheet To view
Summary Summary operating results for the
RYield block
Balance Mass and energy balances around the
RYield block
Phase Equilibrium Liquid, vapor, and overall
compositions of the outlet stream
Weight Distribution Outlet component weight distribution

factors
Pseudocomp Breakdown Pseudocomponent results
Utility Usage Utility usage for this block.
Status View the convergence status and
warning or error messages generated
by an object
RYield Results Summary Sheet
Result Description
Outlet Temperature Displays the calculated or specified
outlet temperature for the block. This
is also the temperature of the stream
leaving this block.
Outlet Pressure Displays the calculated or specified
pressure for the block. This is also the
pressure of the stream leaving this
block.
Heat Duty Displays the calculated or specified
heat duty for the block.
Net Heat Duty Displays the heat duty for the block.
Vapor Fraction Displays the calculated or specified
molar vapor fraction for the block.
First Liquid/Total Liquid Displays the molar ratio of the 1st
liquid phase to the total
Stream Results Material Sheet
Use this field To do this:
Display Indicate whether to display results for
all material streams in the simulation
or selected streams, and the list order
Format Select a Table Format File (TFF) to
TFF to dynamically customize the
stream results. Aspen Plus lists the
default TFF and any customized TFFs
in your current directory, and in the
Aspen Plus system directory. The first
TFF listed (Full) is the default.
THANK YOU

Sarvajanik College OF Engineering and Technology

Uploaded by

Copyright:

Available Formats

Sarvajanik College OF Engineering and Technology

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sarvajanik College OF Engineering and Technology

Uploaded by

Copyright:

Available Formats

SARVAJANIK COLLEGE

Submitted to: Prepared By:

RYield models a reactor by specifying reaction yields of each

Usethis sheet To specify

Use this To specify

Simulation Simulation error level

Property Physical property error level

Stream Stream diagnostics level

On screen Control panel message level

Weight Distribution Outlet component weight distribution

You might also like