Professional Documents
Culture Documents
33kv Abb Gis System
33kv Abb Gis System
System-GIS
introduction &
operating System
Topics covered
1. What is GIS?
2. Safety Precaution for Operating of GIS.
3. Operation of GIS
A. Breaker Operation (VD4X3612/25-40).
B. Isolator & Earthing Switch Operation
(GIS-ZX2).
4. GIS Specification
5. Checking the Gas Pressure in gas Compartment.
6. Heat sink use in GIS
2
What is GIS?
Indication Indication
of spring of spring
discharged charged
6
GIS Breaker (VD4) Emergency Manual
operation
1) Approx. 24 turns of the crank are required from the OFF position
of the three position Isolator to the ON position of the earthing
switch or Isolator and vice versa.
2) Earthing switch OFF → ON
A. To close the earthing switch, turn the crank Anti-clockwise until
the stop is reached.
B. Withdraw the crank.
C.Close the flap of the mechanical access lock.
3) Isolator OFF → ON
A. To close the Isolator, turn the crank clockwise until the stop
is reached.
B. Withdraw the crank.
C. Close the flap of the mechanical access lock, if fitted.
Filling connector
protective cap
valve pin
Locking ring
1. Heat sinks fitted on the bus bar compartment for rated currents >
2000 A are as a rule supplied separately and installed after the
panels have been set up.
2. Heat sinks are fitted for dissipation of heat.
3. The weight of a heat sink is approx. 90 kg.
Heat sink