Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 91 views

    Ss Garbage Chutes

    Uploaded by

    Sahil Malik
    The document provides details on garbage chute systems, including: 1) Intake doors are self-closing with latches, and made of polished stainless steel. Material of construction includes stainless steel, galvanized iron, and mild steel. 2) Venting systems remove smells and gases with fans extracting 300-900 CFM, operating automatically. 3) Chutes discharge directly into collection vehicles or compactors. Segregation systems separate wet and dry garbage. 4) Cleaning systems use water and disinfectants to sanitize chutes. General requirements for installation and garbage room specifications are also outlined.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Ss Garbage Chutes

    Uploaded by

    Sahil Malik
    91 views6 pages
    The document provides details on garbage chute systems, including: 1) Intake doors are self-closing with latches, and made of polished stainless steel. Material of construction includes stainless steel, galvanized iron, and mild steel. 2) Venting systems remove smells and gases with fans extracting 300-900 CFM, operating automatically. 3) Chutes discharge directly into collection vehicles or compactors. Segregation systems separate wet and dry garbage. 4) Cleaning systems use water and disinfectants to sanitize chutes. General requirements for installation and garbage room specifications are also outlined.

    Original Description:

    DESCRIPTION

    Original Title

    Ss Garbage Chutes Converted

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details on garbage chute systems, including: 1) Intake doors are self-closing with latches, and made of polished stainless steel. Material of construction includes stainless steel, galvanized iron, and mild steel. 2) Venting systems remove smells and gases with fans extracting 300-900 CFM, operating automatically. 3) Chutes discharge directly into collection vehicles or compactors. Segregation systems separate wet and dry garbage. 4) Cleaning systems use water and disinfectants to sanitize chutes. General requirements for installation and garbage room specifications are also outlined.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    91 views6 pages

    Ss Garbage Chutes

    Uploaded by

    Sahil Malik
    The document provides details on garbage chute systems, including: 1) Intake doors are self-closing with latches, and made of polished stainless steel. Material of construction includes stainless steel, galvanized iron, and mild steel. 2) Venting systems remove smells and gases with fans extracting 300-900 CFM, operating automatically. 3) Chutes discharge directly into collection vehicles or compactors. Segregation systems separate wet and dry garbage. 4) Cleaning systems use water and disinfectants to sanitize chutes. General requirements for installation and garbage room specifications are also outlined.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 6

    GARBAGE CHUTE

    REPORT

    SUBMITTED BY:
    SAHIL MALIK
    16BAR1066

    SUBMITTED TO:
    AR. SHADAB
    AR. VIVEK
    Garbage Chutes
    Intake Door
    • Intake door are self-closing, with a positive latching system.
    • The front is fabricated of polished stainless steel with matt
    steel backs.
    • Steel angle frame with 3-1/2” steel extensions.
    • Integral polished stainless steel trim, with top side embossed,
    designating the use of the chute.
    • Pivot type hinge welded to the door frame
    •Door equipped with chrome plated kye locking “C” handle
    latching assembly.

    Material of construction
    1, Stainless steel S.S. 430 / S.S. 304
    2, GI - Galvanized Iron
    3, M.S. ORCRC
    Thickness of chutes - 1mm/ 1.2mm / 1.6mm as per diameter.

    Venting
    1. This for removing foul smells and gases generated in
    garbage chute.
    2. Vents are made the same diameter or reducing diameter
    of chute and extend 4ft above roof of the building.
    3. Exhaust system in the top to remove decomposed smell
    and gases with a fan of average speed.
    4. 300 CFM-900 CFM depends on the number oors.
    5. Ventilation is operated automatically (Time base) by electrically
    operated control penal.
    Discharge
    • Chute shall directly discharge into trolley or compactor.
    • Diversion shall not to be allowed. Max diversion of 15 with
    vertical allowed as per codes.

    Discharge end / door


    1. Simple discharge hopper.
    • When a door is not required, we provide conical hopper to avoid
    GARBAGE
    TROLLEY spoiling of garbage and it is directly connected collection trolley

    2. Segregation “Y” hopper


    • It is specially design for separation of wet and dry garbage.
    • Mechanically operated rotating ap is provided to
    divert Dry garbage.
    • This system is operated by electrical control panel

    WET / DRY WET / DRY

    3. Fire door Sliding type


    •Standard sliding disharge door is mounted on bearing in
    sloping position and held open with a 79° U.L. approved
    fusible link. in case of re in garbage room, fusible link
    melts and door shuts mouth of chute and restricting heat
    transfer. Mainly used in Garbage Chutes. control panel.
    GARBAGE
    TROLLEY

    4. Top hinger type :-


    • Top hinge Type discharge door is held horizontally
    against gravity by 79 C. fusible link in Case of re,
    fusible link melts and re door closes the upward
    path of chute restricting heat transfer mainly used
    in Linen Chutes.
    GARBAGE
    TROLLEY
    WATER
    SOURCE
    Chute Cleaning
    WEATHER

    •Cleaning of the chute from inside is very important procedure to


    KAUL
    SANITATION
    EXHAUST UNIT

    maintain hygiene.
    ROOF FAN
    SLAB

    For cleaning chute we provide Two options


    CPVC
    PIPES

    DOOR
    FRAME

    1. Normal Cleaning
    • This Cleaning has been done by normal water coming from
    STRUCTURAL
    overhead water tank and it is operated and controlled by
    electrically operated valve, This valve is tted at top of chute
    BRACKET
    FLOOR SLAB

    DIA,OF CHUTE

    SPRINKLER
    and outlet of water tank. this system operated on manual mode
    as well as automatic modealso.
    HEAD

    INTAKE
    DOOR

    2. Disinfecting and Sanitizing unit


    • This cleaning has been done by normal water with disinfectants
    FLOOR
    SLAB
    and it is added in line by Motorized Pump. This system is
    DISCHARGE
    operated and controlled by electrically control panel. This unit is
    installed at roof level. This system operated on manual mode as
    DOOR
    CONTROL
    PANEL

    GARBAGE
    TROLLEY well as automatic mode also.
    GROUND
    FLOOR

    General requirments for chute installation at site


    Required Minimum Duct Size for Installation
    CHUTE DIAMETRE DUCT SIZE / SLAB OPENING
    450mm 600mm x 600mm
    600mm 750mm x 750mm
    750mm 900mm x 900mm

    •Front well shall be constructed after the erection of Chute.


    •Provide proper single phase power point with earthling for
    control panel in Garbage Room.
    • Provide prede ned water connection with isolation valve.
    •Provide 1” wet riser from re protection system for total building
    height inside.
    •Chute duct (OPTIONAL)

    Material of construction
    • Room shall be air tight non ventilated room.
    • No windows or louvers shall be provide in room.
    • Provide wall tiles (min. 1.8mtr. high) & oor tiles.
    • Floor to have proper slope with drainage.
    •Provide proper single phase power point with suf cient Lighting
    arrangement in Garbage Room.
    • Provide outside opening ush door to garbage room.
    • Chute duct slab to be closed in garbage room after installation
    of chute.
    Garbage Room Sizes Required
    TYPE OF CHUTE SIZE OF GARBAGE ROOM
    - L W H
    STANDARD CHUTE 1500mm 1500mm 2500mm
    SEGREGATION CHUTE 2100mm 1500mm 2500mm
    ELECTRICAL VENT PIPE
    VALVE WITH

    SANITATION

    EXHAUST FAN

    R.L.

    CLEANING
    SPRINKLER

    HOPPER WITH
    INTAKE DOOR INTAKEDOOR

    MOUNTING
    BRACKET
    F.L.

    900MM
    F.L.

    DISCHARGE
    DOOR

    CONTRLPANEL GARBAG GARBAG GARBAG


    E E E
    TROLLEY TROLLEY TROLLEY

    GARBAGEROOM
    Segregation System
    As per Municipal norms segregation of “DRY”(Recycling)& “WET”
    (Biodegradable) garbage is required and shall be collected in
    separate collection Bins.
    We provide facilitates to segregate and collection of garbage by
    using one chute.
    It is fully automatic and one user at a time.

    •Press any button “DRY” or “WET”

    • Busy indicator and hoppers remain locked for all other oors.

    • Chute converts to respective mode “DRY” or “WET” by rotatiw


    ap door in the garbage room.

    • Operated hopper unlocked with indication of selected garbage.

    •Open hopper manually & drop respective garbage bag.


    This bag goes to appropriate trolley.

    •Auto closing hopper resets the system for next use.


    Total change over time of 10 seconds.

    WET
    GARBAG DRY WET
    GARBAG DRY
    TROLLEY
    E TROLLEY
    E

    You might also like