Professional Documents
Culture Documents
Call Processing in Cdma: Mobile Initialization
Call Processing in Cdma: Mobile Initialization
MOBILE INITIALIZATION
INITIALISATION
IDLE
ACCESS
TRAFFIC
MOBILE TRANSITION INTO DIFFERENT STATES
POWER-UP
Mobile
Initialization
State
Mobile
Idle
State
Mobile
System Access
State
Mobile
Traffic Channel
State
SERVICE SIGNALLING LAYER
PILOT:
Power,phase,timing
INITIALIZATION
PILOT & SYNCH
INITIALIZATION
COMPLETE
Overhead info
PAGING IDLE
Mobile Direct
Messages BASE STATION
ACCESS
MOBILE SWITCHED ON
NO
SELECT BEST SIGNAL
PN OFF SET PILOT
READ SYNCH
CHANNEL
SID/NID
YES
READ PAGING
MOBILE IS NOW
CHANNEL
IN IDLE MODE
MOBILE- PILOT CHANNEL ACQUISTION SUBSTATE
All PN Offsets
PILOT SEARCHER SCANS THE ENTIRE RANGE OF PNs
0
Ec/Io
-20
Chips 0 32 K
PN 0 512
Rake Fingers
Handset RAKE RECEIVER 1
F1 PN168 W32 2
RF F2 PN168 W32
3
F3 PN168 W32
LO
Srch PN?? W0
Reference PN
Go to Paging Channel, Get Configured
Idle Handoffcomplete
Mobile Initialization
State
Objective
To extend the battery life of a mobile in slotted mode by reducing
the time the mobile spends monitoring paging channels.
Slotted Mode
Paging channel divided into slots and slot cycles. Mobile monitors
specific slot in a slot cycle.
F-QPCH Functionality
Paging or configuration change indicators is sent out on the
F-QPCH 100ms prior to the message on the F-PCH.
Persistence
Test
tg
1 2 3 Np 1 2 3 Np Time
Probe
SEQUENCE 1 2 Ns
PowerStep
IP tg
ACCESS HANDOFF FEATURES
No
Origination BS sends general
Page to MS
Yes
Access Entry
Handoff
Access
Handoff
MS user
Disconnects or MS
Release Receives Release
Sub State Order
To Mobile
Initialization State
CONVERSATION SUBSTATE
Performing handoffs
Power control
Overload control
BSC
HLR
NAME
MIN
ESN
Location
Desired Slot Cycle
Station Class Mark
Billing Information
…
…
…
TYPES OF REGISTRATION
AUTONOMOUS
• Power up
• Power down
• Timer based
• Distance based
• Zone based
NON-AUTONOMOUS
• Parameter Change
• Ordered
• Implicit
• Traffic Channel
HANDOFFS
• Idle Handoff – when the mobile is in Idle state, the mobile may move from one cell to
another
• Inter Frequency handoff – when the mobile has to retune to a different CDMA frequency
Mobile reports
Results of search to
Base Station
ACTIVE SET
CANDIDATE SET
NEIGHBOR SET
REMAINING SET
Handoff Signalling
Pilot
Strength
T_ADD
T_DROP
Objectives
Maximum QOS
Maximum capacity
Minimize interference
OPEN LOOP
k – Mobile Receive Power(dBm)
+ Parameters
+ Access Probe Corrections
Controls frame error rate of signal received at the serving base station
Rate Set 1