Moulding Techniques

Polymer Molding
Techniques
Injection Molding:
Injection molding is a manufacturing process for producing parts by injecting
material into a mold.
Process Description:
The main method used for processing plastic is injection molding. In this process, the plastic is
placed into a hopper. The hopper then feeds the plastic into a heated injection unit, where it is
pushed through a long chamber with a reciprocating screw. Here, it is softened to a fluid state.
A nozzle is located at the end of the chamber. The fluid plastic is forced through the nozzle into a
cold, closed mold. The halves of the mold are held shut with a system of clamps. When the plastic
is cooled and solidified, the halves open and the finished product is ejected from the press.
Extrusion Molding:
Extrusion can be defined as the process of shaping a material by passing it

through a die.
Principle:
It comprises of forcing a plastic material through an orifice(die) by means of
pressure.
Process Description:
• Polymer extrusion is a high volume manufacturing process in which
raw plastic material is melted and formed into a continuous profile.
• The process of extrusion is usually used to make products such as film,
continuous sheeting, tubes, profile shapes, rods, coat wire, filaments, cords,
and cables.
• As with injection molding, dry plastic material is placed into a hopper and fed
into a long heating chamber.
• At the end of the chamber, however, the material is forced out of a small
opening or a die in the shape of the desired finished product.
• As the plastic exits the die, it is placed on a conveyor belt where it is allowed to
cool. Blowers are sometimes used to aid in this process, or the product may be
immersed in water to help it cool.
Blow Molding:
Blow molding is the process of forming a molten tube (referred to as

the parison or preform) of thermoplastic material (polymer or resin)
and placing the parison or preform within a mold cavity and inflating
the tube with compressed air, to take the shape of the cavity and cool
the part before removing from the mold.
There are three main types of blow molding:
Extrusion blow molding
Injection blow molding
Injection stretch blow molding
The main differences among them are the method of forming the parison;
either by extrusion or injection molding, the size of the parison and the
method of movement between the parison and blow molds; either
stationary, shuttling, linear or rotary.
Thermoforming:
Thermoforming is a manufacturing process where a plastic sheet is heated to a pliable forming
temperature, formed to a specific part shape in a mold, and trimmed to create a usable
product.
The sheet, or film when referring to thinner gauges and certain material types, is heated in an
oven to a high-enough temperature that it can be stretched into or onto a mold and cooled to
a finished shape.
(The second animation shows the twin sheet thermoforming process whereby two individual
components are fused together through the application of tremendous pressure which forces
two molds together, thereby fusing the materials together)
Methods of thermoforming:
Matched mold forming
Slip forming
Air blowing
Vaccum forming
Compression Molding:
Compression molding is the most common process used with thermosetting
materials and is usually not used for thermoplastics.
With this process, the material is squeezed into its desired shape with the help of
pressure and heat.
Plastic molding powder and other materials are added to the mix in order to
create special qualities or to strengthen the final product.
When the mold is closed and heated, the material goes through a chemical
change that causes it to harden into its desired shape. The amount temperature,
amount of pressure, and length of time utilized during the process depends on the
desired outcome.
Calendering:
oIt involves laminar flow with heat transfer in a roll system.
oThese are process applied to rubbery polymers and production of continuous
sheet and film.
oCalendering is a continuous process which works in much the same way as an
old-fashioned clothes mangle
Rotational molding:
Rotational molding is an extremely popular and well-used process for producing items that are
usually hollow.
The mold is closed and then spun both vertically and horizontally and moved into an oven.
 As the powder starts to melt and the mold continues rotating, it is flung onto the walls of the
mold by centrifugal force where it forms a skin.
After a fixed period, the mold is removed from the oven and allowed to cool carefully to avoid
the product shrinking or warping..
There are generally four stages involved.They are loading,molding,cooling and unloading.
Eg: It's most often used for very large articles which are usually made in small quantities

Moulding Techniques

Uploaded by

Copyright:

Available Formats

Moulding Techniques

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Moulding Techniques

Uploaded by

Copyright:

Available Formats

Polymer Molding

Extrusion can be defined as the process of shaping a material by passing it

Blow molding is the process of forming a molten tube (referred to as

You might also like