Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 180 views

    Failure Code Display Algorithm For ECMV

    Uploaded by

    alcowo
    1. The document describes a machine monitor failure code display algorithm that provides failure code displays for up to 3 seconds in user mode and 5 seconds in service mode, with the display time varying between failures due to time gaps between events. 2. It then explains how the controller detects failures such as hot shorts, ground shorts, and disconnections in the 2nd ECMV solenoid and fill switch circuits. 3. A table shows that when these failures occur, the machine is limited to either 1st or 2nd gear depending on the specific failure.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Failure Code Display Algorithm For ECMV

    Uploaded by

    alcowo
    180 views4 pages
    1. The document describes a machine monitor failure code display algorithm that provides failure code displays for up to 3 seconds in user mode and 5 seconds in service mode, with the display time varying between failures due to time gaps between events. 2. It then explains how the controller detects failures such as hot shorts, ground shorts, and disconnections in the 2nd ECMV solenoid and fill switch circuits. 3. A table shows that when these failures occur, the machine is limited to either 1st or 2nd gear depending on the specific failure.

    Original Description:

    Diagnosticos por codigos de fallas

    Original Title

    Failure Code Display Algorithm for ECMV

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document describes a machine monitor failure code display algorithm that provides failure code displays for up to 3 seconds in user mode and 5 seconds in service mode, with the display time varying between failures due to time gaps between events. 2. It then explains how the controller detects failures such as hot shorts, ground shorts, and disconnections in the 2nd ECMV solenoid and fill switch circuits. 3. A table shows that when these failures occur, the machine is limited to either 1st or 2nd gear depending on the specific failure.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    180 views4 pages

    Failure Code Display Algorithm For ECMV

    Uploaded by

    alcowo
    1. The document describes a machine monitor failure code display algorithm that provides failure code displays for up to 3 seconds in user mode and 5 seconds in service mode, with the display time varying between failures due to time gaps between events. 2. It then explains how the controller detects failures such as hot shorts, ground shorts, and disconnections in the 2nd ECMV solenoid and fill switch circuits. 3. A table shows that when these failures occur, the machine is limited to either 1st or 2nd gear depending on the specific failure.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 4

    Failure Code Display Algorithm

    Machine Monitor
    C A N
    Controller Controller Area Network User mode Display

    Judgment by limit value


    Coding
    Service mode Display

    3 sec max 1 sec max


    0.1 sec max – User Mode
    Display Time 5 sec max –Service mode
    User Mode : 3.1 sec max (Abnormality record)
    Service Mode : 9 sec max

    ------- -------- --------------------------------------------------


    updating updating updating
    Failure Failure
    T1 T2
    During updates, even if the same failure occurs, the failure display time may vary
    because of the big time gaps between T1 and T2. ( just for example)
    Failure Detection Method by Controller

    2nd ECMV
    +V * Solenoid
    Controller hot short

    ** * *
    *

    disconnection ground short

    System Short Circuit Disconnection

    Hot short Ground short


    When power is sent to
    Current flows When current is sent transmission 2nd clutch ECMV
    Proportional Solenoid continuously to 2nd to transmission ECMV solenoid circuit, no current flows
    ECMV solenoid solenoid circuit,
    abnormal current
    flowed
    For Example: 2nd ECMV Solenoid and Fill Switch Failures
    The table below shows what gear speed is the machine limited to when the 2 nd ECMV
    solenoid/fill switch disconnection or short occurs.

    Short Disconnection

    Hot Short Ground Short


    Solenoid
    1st
    2nd 1st

    Ground Short Disconnection


    Fill
    Switch
    2nd 1st

    Logic
    Disconnection : The controller chooses the lowest remaining speed clutch

    Short : The controller uses the speed clutch with the shortage fault to
    prevent double engagement
    Failure Action of Controller Problem on Machine
    • Stops output to transmission 2nd clutch • Auto shift function is disabled.
    Disconnection ECMV • When machine stops, engine is de-rated
    2 ECMV Solenoid
    nd • Operation of engine and transmission to half speed.
    are restricted • When machine stops travel is restricted
    to F1 and R1 only.

    • Stops output to transmission 2nd clutch • Auto shift function is disabled.


    ECMV • When machine stops, engine is de-rated
    Ground Short • Operation of engine and transmission to half speed.
    2 ECMV Solenoid
    nd are restricted • When machine stops travel is restricted
    to F1 and R1 only.

    • Stops output to transmission 2nd clutch • Auto shift function is disabled.


    Hot short ECMV • When machine stops, engine is de-rated
    2 ECMV Solenoid
    nd • Operation of engine and transmission to half speed.
    are restricted • When machine stops travel is restricted
    to F2 and R2 only.

    Disconnection • Operation of engine and transmission • Auto shift function is disabled.


    (Fill low) are restricted. • When machine stops, engine is de-rated
    2 ECMV Fill Switch
    nd to half speed.
    • When machine stops travel is restricted
    to F1 and R1 only.

    Short • Operation of engine and transmission • Auto shift function is disabled.


    ( Fill High) are restricted. • When machine stops, engine is de-rated
    2 ECMV Fill Switch
    nd to half speed.
    • When machine stops travel is restricted
    to F2 and R2 only.

    You might also like