Complete Multibody Dynamics Analysis With Adams: ADM701 Workshops
Uploaded by
AutomobilliComplete Multibody Dynamics Analysis With Adams: ADM701 Workshops
Uploaded by
AutomobilliComplete Multibody Dynamics
Analysis with Adams
ADM701 Workshops
March 2013
ADAM*V2013*Z*BFS*Z*SM-ADM701-WBK
Legal Information
MSC.Software Corporation reserves the right to make changes in specifications and other information contained in this
document without prior notice. The concepts, methods, and examples presented in this text are for illustrative and
educational purposes only, and are not intended to be exhaustive or to apply to any particular engineering problem or
design. MSC.Software Corporation assumes no liability or responsibility to any person or company for direct or indirect
damages resulting from the use of any information contained herein.
Copyright © 2013 MSC.Software Corporation. All Rights Reserved. This notice shall be marked on any reproduction of
this documentation, in whole or in part. Any reproduction or distribution of this document, in whole or in part, without the
prior written consent of MSC.Software Corporation is prohibited.
The MSC.Software corporate logo, Adams, Dytran, Easy5, Fatigue, Laminate Modeler, Marc, Mentat, MD Nastran,
Patran, MSC, MSC Nastran, Mvision, Patran, SimDesigner, SimEnterprise, SimManager, SimXpert and Sofy are
trademarks or registered trademarks of the MSC.Software Corporation in the United States and/or other countries.
NASTRAN is a registered trademark of NASA. All other trademarks belong to their respective owners.
CONTENTS
Workshop Page
Workshop 1: Stamping Mechanism………...……...………………………………………………………..……………………..
WS1-1
Workshop 2: Valvetrain Mechanism………...……..………………………………………………………..……………………..
WS2-1
Workshop 3: Adams/PostProcessor Interface Overview………...……...……………………………………………………….
WS3-1
Workshop 4: Falling Stone………...……...………………………………………………………..……………………………….
WS4-1
Workshop 5: Projectile Motion………...……...………………………………………………………..………………………….. WS5-1
Workshop 6: One DOF Pendulum ………...……...………………………………………………………..…………………….. WS6-1
Workshop 7: Inclined Plane………...……...………………………………………………………..…………………………….. WS7-1
Workshop 8: Lift Mechanism I………...……...………………………………………………………..………………………….. WS8-1
Workshop 9: Lift Mechanism II………...……...………………………………………………………..…………………………. WS9-1
Workshop 10: Lift Mechanism III………...……...………………………………………………………..………………………..WS10-1
Workshop 11: Suspension System I………...…...………………………………………………………..……………………… WS11-1
Workshop 12: Suspension System II………...……...………………………………………………………..…………………...
WS12-1
Workshop 13: Suspension-steering System………...……...…………………………………………………………………….WS13-1
Workshop 14: Spring Damper………...……...………………………………………………………..…………………………...
WS14-1
Workshop 15: Nonlinear Spring………...……...………………………………………………………..…………………………WS15-1
Workshop 16: Suspension-Steering System II………...……...………………………………………..…………………………
WS16-1
Workshop 17: Hatchback ………...……...………………………………………………………..………………………………. WS17-1
Workshop 18: Hatchback II………...……...………………………………………………………..…………………………….. WS18-1
Workshop 19: Hatchback III………...……...………………………………………………………..……………………………. WS19-1
Workshop 20: Hatchback IV………...……...………………………………………………………..……………………………. WS20-1
Workshop 21: Cam-Rocker-Valve………...……...………………………………………………………..………………………WS21-1
Workshop 22: Target Practice………...……...………………………………………………………..………………………….. WS22-1
Workshop 23: Switch Mechanism………...……...………………………………………………………..……………………… WS23-1
Appendix A Answer Key
