Water Supply

WATER SUPPLY
Why Treat Water?
• Society realized long ago that human health

and the welfare of the general population are
improved if public water supplies are treated
prior to use.
• Nearly all structures require a water supply.
• Appropriate flow rate, pressure, and water
quality are necessary for effective use.
Uses of Water
• Bathing
• Toilets
• Cleaning
• Food preparation
• Cooling
©iStockphoto.com
• Fire protection
• Industrial purposes
• Drinking water = Potable water
Water Supply System
Sources of Water
Aquifers (Groundwater)
• Primary source of drinking water
• Porous consolidated rock or
unconsolidated soil
• Groundwater fills spaces
• Wells and pumps used to remove
water
Aquifer
This image was reproduced from groundwater.org with the permission of

The Groundwater Foundation. © 2010 The Groundwater Foundation. All
Rights Reserved
Courtesy USGS at
http://pubs.usgs.gov/circ/circ1139/htdocs/boxa.htm
Sources of Water
Surface Water
• Lakes, reservoirs, rivers
• Rivers dammed to create reservoirs
• Reservoirs store water during heavy
rain/snow
Courtesy USDA
http://www.ks.nrcs.usda.gov/news/highlights/2006_april.html
©iStockphoto.com
Courtesy NASA
http://www.ghcc.msfc.nasa.gov/surface_hydrology/water_ma
nagement.html
Lake Tuscaloosa Dam
Water Treatment
• Amount of treatment
depends on quality of the
source
• Ground water requires less
treatment than surface
water
Courtesty USGS http://pubs.usgs.gov/fs/2004/3069/
The city of Salem water treatment

facility withdraws water from the
North Santiam River.
Water Storage
Pumped to Storage Tank

• Storage
• Water pressure
o psi
o 1 psi = 2.31 feet of water
NOAA
http://www.csc.noaa.gov/alternatives/infrastructure.html
Water Distribution System
• Consists of water lines,

fittings, valves, service lines,
meters, and fire hydrants
• Loop system more desirable
than branch system
– Isolation valves
– Water flows in more than
one direction LOOP BRANCH
SYSTEM SYSTEM
Water Distribution System
• Typical new system pipe

– Thermoplastic or ductile iron
– Reinforced concrete in larger mains
• Older system pipe
– Cast-iron or asbestos cement
• Typical distribution pressure of 65 – 75 psi
• Designed for less than 150 psi wikimedia
Consumer
• Residential, commercial, and
industrial facilities
• Residential ©iStockphoto.com
– Min. distribution pressure = 40 psi

– Max. distribution pressure = 80 psi
• Pressure-reducing valve
• Commercial or industrial facilities
– May require higher pressure
– Pumps can increase pressure
©iStockphoto.com
Definition
Head
Relates energy in an incompressible
fluid (like water) to the height of an
equivalent column of that fluid
Definition
Static Head
• Potential energy of the water at rest
• Measured in feet of water
• Change in elevation between source
and discharge
• Ex: What is the static head at a
residential supply line if the water
level in the elevated tank is 943 ft and EPA at
the elevation at the supply line is 890

http://www.epa.gov/region02/superfund/npl/mohonkro
ad/images.html
ft?
943 ft – 890 ft = 53 feet of water

Definition
Static Pressure
• Pressure of water at rest
• Measured in pounds per square inch (psi)
• 2.31 feet of water = 1 psi
• Ex: What is the static pressure at distribution if the
static head is 53 ft of water?
1 psi
53 ft   22.9psi
2.31 ft
• Is this the pressure at which water would exit a
faucet in the house?
Water Pressure Calculations
• How far above the supply line must the

water level in a water tower be in order
to provide a minimum 40 psi?
40 psi  2.31 ft = 92.3 ft of water
NOAA
• Except water loses pressure as it http://www.csc.noaa.gov/alternatives/in

frastructure.html
travels through pipe.

Definitions
Head Loss
• Energy loss due to friction as water moves through
the distribution system
− Pipes
− Fittings
• Elbows, tees, reducers, etc.
− Equipment (pumps, etc.)
• Major losses = head loss associated with friction per
length of pipe
• Minor losses = head loss associated with bends,
fittings, valves, etc.
Calculating Head Loss
Hazen-Williams formula
10.44  L  Q 1.85
hf 
C d
1.85 4.8655
Where: hf = head loss due to friction (ft)

L = length of pipe (ft)
Q = flow rate of water (gpm)
C = Hazen-Williams constant
d = diameter of the pipe (in.)
Hazen-Williams Constant, C
Minor Losses
• Hazen-Williams formula used for straight pipe
• Need equivalent length for each fitting to account for
minor losses.
• Accepted equivalent length values published
©iStockphoto.com
Equivalent Length in feet of pipe (Generic)
Calculating Total Equivalent Length
Example
A 10 inch flanged cast iron water supply line provides service to
a home. The pipe between the water tower and the meter
includes seven regular 90 degree elbows, three line flow tees,
eleven branch flow tees, and six gate valves between the water
tower and a service connection to a residence. What is the
equivalent length of the fittings and valves?
Fitting Quantity Equivalent Total Equiv.

Length (ft) Length (ft)
Reg. 90 deg elbow 7 14.0 98.0
Line flow tee 3 5.2 15.6
Branch flow tee 11 30.0 330.0
Gate valve 6 3.2 19.2
Total 462.8
Example
What is the head loss in the 10 inch cast iron
supply line with a flow rate of 110 gpm if the pipe
is 3.2 miles long and includes the fittings from the
previous slide?
Pipe Length = (3.2 miles)(5280 ft

mile )  16896 ft
Total Equiv. Length = Pipe Length + Equiv. Length of Fittings
Total Equiv. Length = 16896 ft + 462.8 ft = 17358.8 ft

Hazen-Williams Formula
10.44  L  Q 1.85
hf 
C 1.85  d 4.8655
10.44  (17358.8 ft)(110 gpm)1.85

hf 
(100)1.85 (10 in)4.8655
= 2.94 ft
Definition
Dynamic Head
• Head of a moving fluid
• Measured in feet of water
Dynamic Head = Static Head – Head Loss
Courtesy Constructionphotographs.com
Definition
Dynamic / Actual Pressure

• Measured in psi
Dynamic Pressure = Actual Pressure

1 psi
Actual Pressure = Dynamic Head 
2.31 ft
Water Pressure Calculations
Example
The water level in the water tower supplying the
home in the previous example is 1487 ft. The
elevation of the supply line at the residence is
1246 ft. Find the static head, the static pressure,
the dynamic head, and the actual pressure of the
water as it enters the residence.
Example
Static Head= 1487 ft – 1246 ft  241 ft

1 psi
Static Pressure = 241 ft   104.3 psi
2.31 ft
Head Loss (major and minor) = 2.94 ft
Dynamic Head = Static Head – Head Loss

 241 ft – 2.9 ft  238.1 ft
1 psi
Dynamic Pressure = 238.1 ft   103.1 psi
2.31 ft

Water Supply

Uploaded by

Copyright:

Available Formats

Water Supply

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Water Supply

Uploaded by

Copyright:

Available Formats

WATER SUPPLY

Why Treat Water?

• Society realized long ago that human health

This image was reproduced from groundwater.org with the permission of

The city of Salem water treatment

Pumped to Storage Tank

• Consists of water lines,

• Typical new system pipe

– Min. distribution pressure = 40 psi

the elevation at the supply line is 890

943 ft – 890 ft = 53 feet of water

• How far above the supply line must the

40 psi  2.31 ft = 92.3 ft of water

• Except water loses pressure as it http://www.csc.noaa.gov/alternatives/in

travels through pipe.

Where: hf = head loss due to friction (ft)

Fitting Quantity Equivalent Total Equiv.

Pipe Length = (3.2 miles)(5280 ft

Total Equiv. Length = Pipe Length + Equiv. Length of Fittings

Total Equiv. Length = 16896 ft + 462.8 ft = 17358.8 ft

10.44  (17358.8 ft)(110 gpm)1.85

Dynamic Head = Static Head – Head Loss

Dynamic / Actual Pressure

Dynamic Pressure = Actual Pressure

Static Head= 1487 ft – 1246 ft  241 ft

Dynamic Head = Static Head – Head Loss

You might also like