Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 372 views

    Sinamics g120 Ac Drives

    Uploaded by

    Pandu Birumakovela
    This document provides instructions for commissioning a SINAMICS G 120 AC drive. It outlines 3 steps: 1) selecting the commissioning mode using parameter P0010, 2) entering motor nameplate parameters such as voltage, current, RPM into parameters like P304, P305, P311, and 3) configuring inputs and outputs like setting the main setpoint, maximum speed, and digital input functions for start/stop and emergency stop. The instructions provide details on configuring the drive for different application modes like fixed speed control using terminal inputs or potentiometer control of motor speed.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Sinamics g120 Ac Drives

    Uploaded by

    Pandu Birumakovela
    372 views10 pages
    This document provides instructions for commissioning a SINAMICS G 120 AC drive. It outlines 3 steps: 1) selecting the commissioning mode using parameter P0010, 2) entering motor nameplate parameters such as voltage, current, RPM into parameters like P304, P305, P311, and 3) configuring inputs and outputs like setting the main setpoint, maximum speed, and digital input functions for start/stop and emergency stop. The instructions provide details on configuring the drive for different application modes like fixed speed control using terminal inputs or potentiometer control of motor speed.

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for commissioning a SINAMICS G 120 AC drive. It outlines 3 steps: 1) selecting the commissioning mode using parameter P0010, 2) entering motor nameplate parameters such as voltage, current, RPM into parameters like P304, P305, P311, and 3) configuring inputs and outputs like setting the main setpoint, maximum speed, and digital input functions for start/stop and emergency stop. The instructions provide details on configuring the drive for different application modes like fixed speed control using terminal inputs or potentiometer control of motor speed.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    372 views10 pages

    Sinamics g120 Ac Drives

    Uploaded by

    Pandu Birumakovela
    This document provides instructions for commissioning a SINAMICS G 120 AC drive. It outlines 3 steps: 1) selecting the commissioning mode using parameter P0010, 2) entering motor nameplate parameters such as voltage, current, RPM into parameters like P304, P305, P311, and 3) configuring inputs and outputs like setting the main setpoint, maximum speed, and digital input functions for start/stop and emergency stop. The instructions provide details on configuring the drive for different application modes like fixed speed control using terminal inputs or potentiometer control of motor speed.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 10

    SINAMICS G 120 AC DRIVE

    COMMISSIONING
    BY B.PANDU RANGA RAO
    FACTORY SETTING
    STEP 1:

     P 0010 = 0 :READY
    1: QUICK COMMISSIONING
    2: POWER UNIT COMMISSIONING
    3: MOTOR COMMISSIONING
    5: TECHNOLOGICAL APPLICATION UNITS.
    29: ONLY SIEMENS INTERNAL
    30 : PARAMETER RESET.
    39 : ONLY SIEMENS INTERNAL.
    49 : ONLY SIEMENS INT V/F LINEAR.
     P0970=1

    THEN ALL THE PARAMETERS WILL RESET.


    STEP 2:
     P0010=1
     P1300(CONTROL MODE) : V/F LINEAR =0

     P0100: FOR 50 HZ=0


    FOR 60 HZ=1

     P304(MOTOR VOLTAGE): SPECIFICATION ON NAME PLATE OF MOTOR.

     P305(MOTOR CURRENT):SPECIFICATION ON NAME PLATE OF MOTOR.

     P307(MOTOR POWER):SPECIFICATION ON NAME PLATE OF MOTOR.


     P311(MOTOR RPM): SPECIFICATION ON NAME PLATE OF
    MOTOR.

     P308(POWER FACTOR):SPECIFICATION ON NAME PLATE OF


    MOTOR.

     P309(RATED MOTOR EFFICIENCY):SPECIFICATION ON NAME


    PLATE OF MOTOR.

     P310(RATED MOTOR FREQUENCY):SPECIFICATION ON NAME


    PLATE OF MOTOR.

     P311(RATED MOTOR SPEED):SPECIFICATION ON NAME PLATE OF


    MOTOR.
    P1900(MOTOR ID) : OFF = 0
    STILL ROTATION = 1

    STILL =2
    ROTATION =3

    P15(MACRO PARAMETER) : DEFAULT VALUE=12

    P1080(MINIMUM SPEED) :0

    P1082(MAXIMUM SPEED) :

    P2000(REFERENCE SPEED) :
    P1120(RAMP UP) :10sec (Default)

    P1121(RAMP DOWN) :10sec (Default)

    P3900(END OF QUICK COMMISSIONING):0=NO QUICK


    COMMISSIONING
    1=MOTOR CALCULATION AND RESET
    ALL PARA METERS.
    2= MOTOR CALCULATION AND
    RESET ALL THE I/0 SETTING TO THE
    FACTORY SETTING.
    3=ONLY MOTOR CALCULATION
    OPERATING MOTOR BY USING ANALOG INPUTS WITH HELP OF
    POTENTIOMETER.
     P756(INPUT RANGE): 0 TO 10 V = 0

     P1070(MAIN SET POINT)=r755

    DIGITAL INPUTS

     P840(START/STOP):5 DI 0=r722.0

     P848(EMERGENCY):6DI 1= r722.1

     P2103(ACKNOWLEDGE FAULTS):8DI 2=r722.2

     P1082(MAXIMUM SPEED):1500 RPM.


    FIXED SET POINT
    OPERATING MOTOR BY USING DIGITAL INPUTS WITH HELP OF
    TERMINAL STRIP .
     P1070(MAIN SET POINT)=r1024

     P1020(Fixed speed set point selection Bit 0)=r722.0

     P1021(Fixed speed set point selection Bit 1)= r722.1

     P1022(Fixed speed set point selection Bit 2)=r722.2


     P1082(MAXIMUM SPEED):1500 RPM.

     P1113(SETPOINT INVERSION):0

     P1001(FIXED FREQUENCY 1):ANY


    VALUE NOT EXCEED RPM OF
    THE MOTOR GIVEN ON NAME PLATE.

     P1002(FIXED FREQUENCY 2): ANY VALUE NOT EXCEED RPM OF


    THE MOTOR GIVEN ON NAME PLATE.
     P1003(FIXED FREQUENCY 3): ANY VALUE NOT EXCEED RPM OF
    THE MOTOR GIVEN ON NAME PLATE.
    MOTORPOTENTIOMETER:
     P840 (START/STOP ) : r722.0

     P1035 (MOTORIZED POTENTIOMETER RAISE): r722.1

     P1036 (MOTORIZED POTENTIOMETER LOW): r722.2

     P1070 (MAIN SETPOINT) : r1050

     P848 (EMERGENCY) : 1(ALLWAYS ON BIT)

    You might also like