Crusoe Processors

THE TECHNOLOGY
BEHIND CRUSOE
PROCESSORS
CHETAN D
introduction
 The Crusoe™ processors are an x86-
compatible family of solutions
 It combines
• strong performance
• remarkably low power consumption
 It is fundamentally software based
 Power savings come from replacing large

numbers of transistors with software.
Fundamentals
 The Crusoe processor consists of
• a hardware engine
logically surrounded by
• a software layer
• The engine is a very long instruction word

(VLIW) CPU capable of executing up to
four operations in each clock cycle
Instruction Molecule
 ithas been designed purely for fast low-
power implementation
 It uses conventional CMOS fabrication.
 The surrounding software layer gives

x86 programs the impression that they
are running on x86 hardware.
Code morphing software
 The software layer is called Code
Morphing™ software.
 It dynamically “morphs” x86 instructions into

VLIW instructions
 Code Morphing software includes a number

of advanced features to achieve good
system-level performance.
 The Code Morphing software is
fundamentally a dynamic translation
system
 A program that compiles instructions for
one instruction set architecture (in this
case, the x86 target ISA) into instructions
for another ISA (the VLIW host ISA).
 The Code Morphing software resides in
a ROM and is the first program to start
executing when the processor boots.
 The Code Morphing Software supports
ISA, and is the only thing x86 code sees;
the only program written directly for the
VLIW engine is the Code Morphing
software itself.
Code morphing software
Mobile PII Mobile PII Mobile TM3120 TM5400
PIII
Process .25m .25m .18m .22m .18m

shrink
On-chip 32KB 32KB 32KB 96KB 128KB
L1 Cache
On-chip 0 256KB 256KB 0 256KB
L1 Cache
Die Size 130mm 180mm 106mm 77mm 73mm

Deco din g an d S chedul ing
1. Conventional x86 superscalar

processors fetch x86 binary instructions
from memory
3. Decode them into micro-operations
5. These are reordered by out-of-order

dispatch hardware
7. Fed to the functional units for parallel

execution.
TRANSLATION
 The software translates instructions once,
 Then saves the resulting translation in a

translation cache
 The next time the (now translated) x86 code

is executed, the system skips the translation
step and directly executes the existing
optimized translation.
TRANSLATION
 The translation cache, along with the
Code Morphing code, resides in a
separate memory space that is
inaccessible to x86 code.
 The size of this memory space can be

• Set at boot time, or
• The operating system can make the size
adjustable.
TRA NSL ATIO N
 Molecules are executed in-order by the

hardware
 Butthe work of the original x86 instructions is

performed out of order.
TRA NSL ATIO N
 Molecules explicitly encode the
instruction-level parallelism
 Hence they can be executed by a simple,

fast and low-power
VLIW engine
 The hardware need not perform any

complex instruction reordering itself.
Features of CRUSOE
 CRUSOE translation does not have

unconditional JMP like x86
 Thepath selector simply “follows” the

branch and continues translation at the
target of the JMP.
 The translator has replaced the two internal
conditional branches with “select” instructions
(which conditionally pick one of two results)
 In effect, the Code Morphing system is

speculatively executing both legs of a branch and
picking the correct result later.
 This greatly increases efficiency

 Registers
have been aggressively
renamed in software
 Thereis no need for a complex (and

power consuming) register renamer in
hardware.
 The scheduler has rearranged the
instructions to execute out of order
relative to the original x86 “source”
code.
 The Crusoe alias hardware has been used
in the translation (in molecules 5 through 8)
to hoist loads above stores and thus pack the
code more effectively
Application
 The Crusoe processor solutions have
been designed for lightweight (two to
four pound) mobile computers and
Internet access devices such as
handhelds and web pads.
 They can give these devices PC
capabilities and unplugged running times
of up to a day.
Advantages
 Saves millions of logic transistors and

cuts power consumption on the order of
60–70% over conventional approaches
 Achieves low power consumption without

sacrificing high performance for real-
world applications.
QUESTIONS ??
?
TH AN K
YOU

Crusoe Processors

Uploaded by

Copyright:

Available Formats

Crusoe Processors

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Crusoe Processors

Uploaded by

Copyright:

Available Formats

THE TECHNOLOGY

 Power savings come from replacing large

• The engine is a very long instruction word

 It uses conventional CMOS fabrication.

 The surrounding software layer gives

 It dynamically “morphs” x86 instructions into

 Code Morphing software includes a number

Process .25m .25m .18m .22m .18m

Die Size 130mm 180mm 106mm 77mm 73mm

1. Conventional x86 superscalar

3. Decode them into micro-operations

5. These are reordered by out-of-order

7. Fed to the functional units for parallel

 Then saves the resulting translation in a

 The next time the (now translated) x86 code

 The size of this memory space can be

 Molecules are executed in-order by the

 Butthe work of the original x86 instructions is

 Hence they can be executed by a simple,

 The hardware need not perform any

 CRUSOE translation does not have

 Thepath selector simply “follows” the

 In effect, the Code Morphing system is

 This greatly increases efficiency

 Thereis no need for a complex (and

 Saves millions of logic transistors and

 Achieves low power consumption without

You might also like