Presentation On Carrier Guidance & Industry Oppertunities - JDB (Ab)

MSME TECHNOLOGY CENTRE
INDO GERMAN TOOL ROOM, AURANGABAD

(A Govt. of India society, Ministry of MSME)
An ISO 9001:2008, ISO 29990:2010, ISO 14001:2004 BS OHSAS 18001:2007, ISO/IEC 17025:2005 Certified Tool Room & Training Centre
A
PRESENTATION
ON
CARRIER GUIDANCE & INDUSTRY
OPPERTUNITIES
FOR
DEGREE / DIPLOMA ENGINEERING PASS-OUT
STUDNTS
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT EXACTLY DO
A
STUDENT OF
MECHNICAL ENGINEERING
DURING
DIPLOMA ENGG. / DEGREE ENGG.
COURSE ?????
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT
ARE
THE AREA OF MECHANICAL ENGINEERING
COVERED
DURING
DIPLOMA ENGG. / DEGREE ENGG. COURSE ?????
• MAXIMUM THEORY
• KNOWLEDGE BASED LEARNING
• LITTLE PRACTICAL – MOSTLY LABORATORY /
• LIMITATION IN SKILL
EXPERIMENTAL ACTIVITIES
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT IS
THE BASIC / MAIN ROLE / REQUIREMENT
OF
A
MECHNICAL ENGINEER
INTO
INDUSTRY ?????
PERTICIPATION IN PRODUCT CREATION
(DESIGN / MANUFACTURING / ASSEMBLING / MAINTAINATANCE / QUALITY & PERFORMANCE CHECKING etc.)
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT ARE
THE AREA OF WORKING
OF
A
MECHNICAL ENGINEER
INTO
INDUSTRY ?????
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT
IS
“NEXT”
AFTER
DIPLOMA ENGG. / DEGREE ENGG. COURSE
IN THE FIELD OF
MECHANICAL ENGINEERING?????
1. JOB 2. HIGHER STUDY

BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT ARE THE

BASIC GENERAL EXPECTATION
OF
A CAMPUS INTERVEIWER
FROM
A STUDENT
JUST PASSING OUT
IN THE FIELD OF
MECHANICAL ENGINEERING????? BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHY
SHORT TERM COURSE
FROM
IGTR,AURANGABAD
BECOMES
“MANDATORY”
FOR
A STUDENT
DOING
IN THE FIELD OF
MECHANICAL ENGINEERING?????
• TO DEVOLOP SKILL WITH PARTICULAR SOFTWARE OR PARTICULAR KINDS OF CNC MACHINE PROGRAMMING
& OPERATION
• TO GET ACQUINTED WITH THE AREA OF SKILL DEVOLOPMENT AND NEEDS
• TO GET CERTIFICATION OF SKILL BY GOVT. OF INDIA - MSMSE TC WHICH MAY BE ENTRY PASS FOR CAMPUSS
INTERVIEW JUST AFTER ENGG. DEGREE / DIPLOMA
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT DO YOU DO
IF
YOU DON’T BE ABLE GET SELECTED BY ANY COMPANY FOR
JOB
JUST AFTER
IN THE FIELD OF MECHANICAL ENGINEERING
?????
GET FRAUSTRATED & WAIT FOR GOOD
TIME ????????
OR
HIGHER STUDY WITHOUT DELAY

????????? BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
ON WHAT BASIS
NORMALLY
SHOULD WE SELECT AREA OF HIGHER STUDY
JUST AFTER
IN THE FIELD OF
MECHANICAL ENGINEERING
FOR THE BENEFITS OF CARRIER
?????
SKILL DEVOLOPMENT TRAINING
KNOWLEDGE BASED EDUCATION PROGRAMME
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT ARE THE

OPPERTUNITIES
IS GETTING OFFERED SKILL DEVOLOPMENT
BY TRAINING PROGRAMME
IGTR, AURANGABAD WITH LATEST
FOR YOU TECHNOLOGIES USING IN
JUST AFTER ENTIRE INDUSTRIES:-
DIPLOMA ENGG. / DEGREE ENGG. COURSE 1. SHORT TERM COURSE
IN THE FIELD OF 2. MEDIUM TERM COURSE
MECHANICAL / PRODUCTION ENGINEERING 3. LONG TERM COURSE
FOR THE BENEFITS OF YOUR CARRIER
?????
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT ARE
THE AREA OF ACTIVITY
OF
IGTR, AURANGABAD
????
DO YOU KNOW
?????
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHY
POST GRADUATE DIPLOMA IN TOOL DESIGN AND CAD CAM
OR
POST DIPLOMA IN TOOL DESIGN AND CAD CAM
OR
POST DIPLOMA IN TOOL AND DIE MANUFACTURING
OR
POST DIPLOMA IN PRODUCT DESIGN
AT
IGTR, AURANGABAD
AFTER
JUST AFTER
IN THE FIELD OF
MECHANICAL / PRODUCTION ENGINEERING
FOR THE BENEFITS OF YOUR CARRIER
?????
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHAT SKILL-SETS YOU CAN ACHIEVE ???????

AREA OF SKILL POST GRADUATE DIPLOMA IN TOOL POST DIPLOMA IN TOOL POST DIPLOMA IN TOOL
POST DIPLOMA IN PRODUCT DESIGN
SET DESIGN AND CAD CAM DESIGN AND CAD CAM AND DIE MANUFACTURING
AUTOCAD, COLLABCAD,
AUTOCAD, COLLABCAD, SOLIDWORKS, AUTOCAD, COLLABCAD, AUTOCAD, COLLABCAD, SOLIDWORKS,
SOLIDWORKS, MASTERCAM,
SOFTWARE SKILLS MASTERCAM, UG-CAD, UGCAM, CATIA, SOLIDWORKS, MASTERCAM, UG- MASTERCAM, UG-CAD, UGCAM, CATIA,
DELCAM, UGCAM,
CREOPARAMETRIC, ANSYS CAD, UGCAM, CATIA, CREOPARAMETRIC, ANSYS
UG-CAD, CATIA,
FUNDAMENTALS OF JIGS &

DESIGN OF JIGS & FIXTURES, DESIGN OF DESIGN OF JIGS & FIXTURES, FIXTURES, PRESS TOOLS, FUNDAMENTALS OF JIGS & FIXTURES, PRESS
TOOL DESIGN / PRESS TOOLS, DESIGN OF MOLDS, DESIGN OF PRESS TOOLS, MOLDS, DIE CASTING DIES, TOOLS, MOLDS, DIE CASTING DIES,
MANUFACTURING DESIGN OF DIE CASTING DIES, MFG. DESIGN OF MOLDS, DESIGN OF DIE METAL CUTTING & CUTTING PRODUCT DESIGN AND DEVELOPMENT,
SKILLS PROCESS PLANNING AND HEAT CASTING DIES, MFG. PROCESS TOOL DESIGN, MATERIAL IN PRODUCT DESIGN AND
TREATMENT PLANNING AND HEAT TREATMENT ENGG. MATERIAL AND HEAT DEVELOPMENT,
TREATMENT
GENERAL
PRODUCTION PLANNING &
ENGINEERING ADVANCE METROLOGY, ENGINEERING METROLOGY AND ENGINEERING METROLOGY AND QUALITY
CONTROLS ,
SKILLS / ENGINEERING RESEARCH METHODOLOGY QUALITY CONTROL , ASSURANCE
TOTAL QUALITY MANAGEMENT
AWARENESS
ENTREPRENEURSHIP,
ENTREPRENEURSHIP,
SPECIFIC UNIQUE ENTREPRENEURSHIP, RAPID PROTOTYPING AND REVERSE
RAPID PROTOTYPING AND REVERSE
SKILL / ENTREPRENEURSHIP, 6 MONTHS LIVE PROJECT ENGINEERING,
ENGINEERING ,
AWARENESS / COURSE-WORK: PROJECT AT DIFFERENT AREA AT 3D SCANNING & 3D PRINTING,
6 MONTHS LIVE PROJECT AT VARIUOS
ACTIVITIY PRODUCTION DEPT. MORE THAN 1.5 MONTHS LIVE PROJECT
DEPT.
ON PRODUCT DEVOLOPMENT
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
WHEN WILL START THE NEXT BATCHES ???????
ON
1st OCTOBER 2018
ADMISSION IS GOING ON FOR ALL COURSES
PLEASE INFORM YOUR FRIENDS – RELATIVES WHO NEED THESE

BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
ANY QUESTIONS???????
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
THANK YOU !!!!!!!!!!!!!!!!!!!!!
BY
ARNAB BHATTACHARJEE
ENGINEER (Trg.)
TITLE  CONTENTS
 INRODUCTION TO AUTOCAD
 DRAW & MODIFY TOOLBAR
 DIMENSIONS TOOLBAR
 INSERT & FORMAT TOOLBAR
AUTOCAD
 VIEW TOOLBAR
(Mechanical)
 EDIT TOOLBAR
 PARAMETRIC TOOLBAR
 EXPRESS TOOLBAR
 SOLID MODELING
 INTRODUCTION TO SOLIDWORKS
 SKETCHER
SOLIDWORKS  PART MODELING
(CAD)  SURFACE
 ASSEMBLY
 DRAFTING
CAD SOFTWARE (LOWER & MIDDLE END)

SR. COURSE DURATION TUITION FEE
AREA / BRANCH TOPICS (HRS.) PER TRAINEE (INR)
NO. (SUBJECT)
INTRODUCTION TO AUTOCAD
DRAW TOOLBAR
MODIFY TOOLBAR
DIMENSIONS TOOLBAR
INSERT TOOLBAR
MECHANICAL,
FORMAT TOOLBAR
1 PRODUCTION, AUTOCAD (MECH) 72 4500.00
AUTOMOBILE VIEW TOOLBAR
EDIT TOOLBAR AT THE END OF THE COURSES, ALL WILL BE ABLE TO :-
PARAMETRIC TOOLBAR 1. CREAT ORTHOGRAPHIC AND ISOMETRIC VEIWS
EXPRESS TOOLBAR THROUGH AUTOCAD
SOLID MODELING 2. CREAT SOLID MODEL THROGH AUTOCAD AND
EXERCISES SOLIDWORKS
SKETCHER 3. CREAT SURFACE MODEL THROUGH SOLIDWORKS
MECHANICAL, PART MODELING 4. CREAT ASSEMBLY MODEL THROUGH SOLIDWROKS
2 PRODUCTION, SOLID WORKS SURFACING 72 5500.00 5. CREAT DRFTING VIEWS THROUGH SOLIDWORKS
AUTOMOBILE ASSEMBLY - WITH THE SAME PROCESS AS USED IN THE PRESENT
DRAFTING INDUSTUSTRIES
CAD SOFTWARE (HIGHER END)

AREA / BRANCH TOPICS
NO. (SUBJECT) (HRS.) PER TRAINEE (INR)
INTRODUCTION TO UG
INTERFACE & COORDINATE SYSTEM
MECHANICAL, CURVES
UNIGRAPHICS
6 PRODUCTION, SKETCHER 96 11000.00
(CAD)
AUTOMOBILE FEATURE BASED MODELLING
ASSEMBLY MODELLING
DETAILING
INTRODUCTION TO PRO-ENGINEER
FUNDAMENTALS OF PRO-ENGINEER
SKETCHER AT THE END OF THE COURSES, ALL WILL BE ABLE TO :-
MECHANICAL, CREO -
PART MODELING 1. UTALISE THE HIGHER END CAD SOFTWARES FOR
7 PRODUCTION, PARAMETRIC 96 8000.00
AUTOMOBILE (CAD) PRO-SURFACE
PRODUCT DESIGN AND DEVOLOPMENT AS USED IN
ASSEMBLY
MODELING
PRESENT INDUSTRIES
DETAILING 2. CREAT SOLID MODEL, SURFACE MODEL AND
INTRODUCTION TO CATIA VARIOUS ASSEMBLY MODEL THROUGH
SKETCHER WORKBENCH
PART DESIGN WORKBENCH
SOLIDWROKS
8
MECHANICAL,
PRODUCTION,
CATIA WIRE FRAME AND SURFACE DESIGN 3. CREAT DRFTING VIEWS
WORKBENCH 96 8000.00
AUTOMOBILE
(CAD)
ASSEMBLY DESIGN WORKBENCH
- WITH THE SAME PROCESS AS USED IN THE PRESENT
GENERATIVE AND INTERACTIVE DRAFTING INDUSTUSTRIES
WORKBENCH
CAM SOFTWARE
NO. (SUBJECT)
2D DRAFTING
MECHANICAL, WIREFRAME MODELING
MASTER CAM
3 PRODUCTION,
(CAD/CAM)
SURFACE MODELING 72 5500.00
AUTOMOBILE TOOL PATH GENERATION
POST PROCESSING
2D DRAFTING AT THE END OF THE COURSES, ALL WILL BE ABLE TO :-
WIREFRAME MODELING
1. WORK WITH CAM SOFTWARES FOR TOOLPATH
MECHANICAL,
4 PRODUCTION,
DELCAM
SURFACE MODELING 72 5500.00
GENERATION AND CNC PROGRAMMIMG AS USED
(CAD/CAM) IN PRESENT INDUSTRIES
AUTOMOBILE TOOL PATH GENERATION
POST PROCESSING
2. CREAT AND EDIT SOLID & SURFACE MODELS
INTRODUCTION TO UG
3. GENERATE TOOL PATH AND DO POST PROCESSES
OVERVIEW OF THROUGH THE CAM SOFTWARES
MECHANICAL, MANUFACTURING 4. GENERATE CNC PROGRAME WITH G-CODE & M-
UNIGRAPHICS POINT TO POINT MACHINING
5 PRODUCTION,
(CAM) PLANNER TURNING & 96 11000.00 CODE WITH CAM SOFTWARES
AUTOMOBILE MILLING
CAVITY MILLING
- FOLLOWED BY SAME TECHNIQUES AS USED IN THE
PROGRAM GENERATION & PRESENT INDUSTUSTRIES
CAE SOFTWARE
NO. (SUBJECT)
INTRODUCTION TO FEA
INTRODUCTION TO ANSYS & DIFFERENT TYPE OF
MECHANICAL, INTERFACES
9 PRODUCTION, ANSYS (CAE)
ANSYS BASICS & GENERAL ANALYSIS PROCEDURE 72 9000.00
AUTOMOBILE
STRUCTURAL ANALYSIS
THERMAL ANALYSIS
INTRODUCTION TO CFD, CFX & FLUENT
DESIGN MODELER, MESHING, TURBULENT MODELS
MECHANICAL,
BOUNDRY CONDITIONS & SPECIFICATIONS
10 PRODUCTION, ANSYS (CFD) 72 11000.00
AUTOMOBILE AREODYNAMIC HEAT TRANSFER / THERMAL ANALYSIS
INTERNAL & EXTERNAL FLOWS, POST PROCESSING /

RESULTS
INTRODUCTION TO FEA
INTRODUCTION TO HYPERMESH AT THE END OF THE COURSES, ALL WILL BE ABLE TO :-
GEOMETRY CREATION
11
MECHANICAL,
PRODUCTION,
HYPERMESH
2D MESH 72 9000.00 1. WORK WITH CAE SOFTWARES FOR DIFFERENT
(CAE)
AUTOMOBILE 3D MESH TYPES OF ANALYSIS AS USED IN PRESENT
MESH ANALYSIS
OPTISTRUCT INDUSTRIES
INTRODUCTION TO FEA 2. EXECUTE ANALYSYS ASSOCIATED TO THE CONCEPT
INTRODUCTION TO HYPERMESH
MECHANICAL, GEOMETRY CREATION OF FLUID DYNAMICS BY ANSYS - CFD SOFTEWARE
HYPERFORM
12 PRODUCTION,
AUTOMOBILE
(CAE)
ONE STEP ANALYSIS 72 9000.00 - WITH THE SAME TECHNIQUES AS USED IN THE
INCREMENTAL
VISULIZING BY HYPERVIEW PRESENT INDUSTUSTRIES
SOLVING THROUGH RODISS SOLVER
3D PRINTING TECHNOLOGY
NO. (SUBJECT)
ADDITIVE TECHNOLOGY & ITS APPLICATION

ADDITIVE MANUFACTURING TYPES
MECHANICAL, 3D PRINTING / PREPARING THE MODEL FOR RAPID MANUFACTURING
13 PRODUCTION, RAPID DIFFERENT MATERIALS AND THEIR PROPERTIES 72 10000.00
AUTOMOBILE TECHNOLOGY ADJUSTMENT OF PARAMETERS
TIME ESTIMATING THE PRODUCT MANUFACTURING
OBSERVATION ON 3D PRINTING METAL & PLASTICS
AT THE END OF THE COURSES, ALL WILL BE ABLE TO :-

1. USE AND APPLY THE 3D PRINTING TECHNOLOGY FOR RAPID PROTYPING
2. WORK WITH 3D PRINTING MACHINE TO PRODUCE METAL / PLASTIC PARTS
WITH DIFFERENT ADDITIVE MANUFACTURING PROCESSES
- WITH THE SAME TECHNIQUES AS USED IN THE PRESENT INDUSTUSTRIES

SOFTWARES FOR CIVIL ENGINEERS

AREA / BRANCH TOPICS
NO. (SUBJECT) (HRS.) PER TRAINEE (INR)
GETTING STARTED
CREATING OBJECTS
EDITING METHOD
DRAWING WITH PRECISION
CONTROLLING AND DRAWING DISPLAY
CIVIL,
14 AUTOCAD (CIVIL) LAYERS, COLOURS AND LINE TYPE 72 4500.00
ARCHITECTURE
ADDING TEXT TO DRAWINGS
DIMENSIONING & TOLERANCING
USING BLOCKS, ATTRIBUTES, X-REF
LAYOUT AND PLOTTING
WORKING IN 3D SPACE
INTRODUCTION TO STAAD PRO
ANALYSIS OF RC STRUCTURE AND POWER TRANSMISSION
CIVIL, TOWER
15
ARCHITECTURE
STAAD PRO 72 9000.00
APPLICATION OF LOADING CONDITION
METHOD FOR DESIGNING SHEAR WALL
DESIGN OF SLAB
AT THE END OF THE COURSES, ALL WILL BE ABLE TO :-
REVIT AUTO DESK ARCHITECTURE
GETTING STARTED PRINCIPLES AND CONCEPTS
1. UTALISE SOFTWARES THOSE ARE USED IN CIVIL
WORKING WITH PROJECT AND ELEMENTS ENGINEERING APPLICATIONS
CIVIL, REVIT WORKING WITH PROJECTS VIEWS AND WORK PLANES
16
ARCHITECTURE ARCHITECTURE WORKING WITH BASIC BUILDING COMPONENTS
72 9000.00
2. CREAT CIVIL ARCHITECTURAL MODELS WITH
APPROPRIATE SOFTWARE
WORKING WITH SITE DESIGN
WORKING WITH CONSTRUCTION DOCUMENTS
RENDERING BASICS
INTRODUCTION OF 3DS MAX
GETTING STARTED (PRINCIPLE & CONCEPT)
CREATING OBJECTS OF LAYER AND WALLS
- WITH THE SAME PROCESS AS USED IN THE PRESENT
17
CIVIL,
ARCHITECTURE
3DS-MAX
WORKING WITH PRIMITIVES MODIFIERS &
REACTORS IN 3DS MAX
72 6000.00 INDUSTUSTRIES
MODELING IN 3DS MAX, ANIMATION OF 3DS MAX
BASICS OF LIGHTS AND MATERIALS AND CAMERA
EXPLORING RENDERING, CREATING SURFACE MODEL
 INTRODUCTION OF INDUSTRIAL AUTOMATION.

 DETAILS OF PLC HARDWARE (SIEMENS)
BASIC  PROGRAMMING LANGUAGES
PLC PROGRAMMING  DOWNLOADING PROGRAMME.
 LIVE PRACTICE: INTERFACING BETWEEN PLC & VARIOUS FIELD
DEVICES.
 DETAILS OF PLC HARDWARE (SIEMENS)
 PROGRAMMING LANGUAGES
PLC PROGRAMMING
 DOWNLOADING PROGRAMME.
 LIVE PRACTICE: INTERFACING BETWEEN PLC & VARIOUS FIELD
DEVICES.
 CREATING A NEW SCADA APPLICATION.
BASIC SCADA  DETAILS OF PROCESS TAGS & INTERNAL TAGS.
 LIVE PRACTICE: CREATING A PROCESS CONTROL WINDOW WITH ALL
APPLICATIONS.

 CREATING A NEW SCADA APPLICATION.
SCADA  DETAILS OF PROCESS TAGS & INTERNAL TAGS.
 LIVE PRACTICE: CREATING A PROCESS CONTROL WINDOW WITH ALL
APPLICATIONS.

Presentation On Carrier Guidance & Industry Oppertunities - JDB (Ab)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Presentation On Carrier Guidance & Industry Oppertunities - JDB (Ab)

Uploaded by

Copyright:

Available Formats

MSME TECHNOLOGY CENTRE

INDO GERMAN TOOL ROOM, AURANGABAD

1. JOB 2. HIGHER STUDY

WHAT ARE THE

HIGHER STUDY WITHOUT DELAY

WHAT ARE THE

WHAT SKILL-SETS YOU CAN ACHIEVE ???????

FUNDAMENTALS OF JIGS &

WHEN WILL START THE NEXT BATCHES ???????

ADMISSION IS GOING ON FOR ALL COURSES

PLEASE INFORM YOUR FRIENDS – RELATIVES WHO NEED THESE

THANK YOU !!!!!!!!!!!!!!!!!!!!!

CAD SOFTWARE (LOWER & MIDDLE END)

CAD SOFTWARE (HIGHER END)

INTERNAL & EXTERNAL FLOWS, POST PROCESSING /

ADDITIVE TECHNOLOGY & ITS APPLICATION

AT THE END OF THE COURSES, ALL WILL BE ABLE TO :-

- WITH THE SAME TECHNIQUES AS USED IN THE PRESENT INDUSTUSTRIES

SOFTWARES FOR CIVIL ENGINEERS

 INTRODUCTION OF INDUSTRIAL AUTOMATION.

 INTRODUCTION OF INDUSTRIAL AUTOMATION.

You might also like