This presentation is my graduation internship presentation at BSL (LNJ group) Bhilwara (Rajasthan).
In this presentation I describe BSL company profile, Process significance, all steps which use for fibre to fabric in textile.
This document discusses nonwoven needle punching processes. It defines nonwovens and describes the three stages of nonwoven production: web formation, web bonding, and finishing treatments. It then focuses on the needle punching process, describing how barbed needles repeatedly penetrate a fibrous web to mechanically entangle the fibers. Key aspects of needle design like needle density and stroke frequency are discussed. The principles of needle punching and how it orientates fibers are also summarized. Applications of needle punched nonwovens are then listed.
This document provides information on reactive and pigment printing methods. It begins with an introduction to reactive dye printing, which uses heat-activated dyes that permanently bond to substrates. The document then discusses the history, popularity, and processes of both reactive and pigment printing. It provides details on the components, characteristics, advantages, and disadvantages of each method. Overall, the document serves as an overview of reactive and pigment printing techniques for textiles.
Lappet weaving and swivel weaving are types of weaving that produce decorative patterns. Lappet weaving introduces extra warp threads into a plain weave base to create figures, while swivel weaving introduces extra weft threads into the base fabric to produce spot effects. Both weaving styles can produce attractive designs but lappet weaving is more durable, and swivel weaving may cause roughness on the back side of the fabric. Common fabrics produced include madras, grenadine and dotted swiss. The key difference between the two is that in swivel weaving, the extra weft threads are cut off at the end of each design while in lappet weaving the design thread is
Roller printing is a modern continuous textile printing technique where a heavy copper cylinder engraved with the print design is used to transfer ink onto fabric. The roller printing process involves a color doctor, doctor blade, engraved roller, lint doctor, blankets, back grey, and furnishers to transfer multiple colors of ink in a single pass onto the fabric from the engraved roller. While it allows for higher production speeds and more complex designs than traditional block printing, roller printing has disadvantages such as not being able to print large designs, lower coloring effects, and defects that can occur in the engraved roller.
High performance fibers are fibers that provide higher strength and functionality compared to commodity fibers like nylon and polyester. They have unique properties such as high tensile strength, heat resistance, and chemical resistance that make them suitable for demanding applications. Examples of high performance fibers include aramid fibers like Kevlar and Nomex, which have very high tensile strength and heat resistance. These fibers are made through solution polymerization or interfacial polymerization of monomers like paraphenylene diamine and terephthaloyl chloride. The resulting polymers have aromatic rings in their backbone, providing properties like strength, stiffness, and thermal and chemical resistance.
The document provides information about the ball warping process used to prepare yarn for denim production. It discusses:
1) Ball warping involves creeling multiple ends of yarn and collecting them into an untwisted rope for dyeing. The rope is wound onto a long cylinder called a log.
2) Key steps include passing yarn through a reed to separate ends, inserting lease strings, and condensing the yarn into a rope using a trumpet.
3) After indigo dyeing the rope, it undergoes long chain beaming to change the alignment from rope to sheet form before sizing and weaving. Tension rollers help further separate the yarns.
The document discusses various textile finishing processes. It describes finishing as a process that improves the look, performance, hand and feel of textiles. Some key finishing processes covered include damping, drying methods like cylinder drying and stenter drying, calendaring, and crepe effects. It also discusses shrinkage prevention in cotton and different types of finishes like temporary, permanent and semi-permanent.
The document discusses different types of fabric structures that produce horizontal lines, including welts and piques. Welts produce simple cord lines, while piques produce woven cord lines. A typical pique structure consists of a plain weave face fabric with additional back warp threads. These back threads are woven in at intervals to pull down the face fabric and create indentations. Wadding picks can also be inserted to increase prominence of the unstitched portions. Various welt and pique structures are described, including loose back welts, wadded welts, fast back welts, and waved piques. Diagrams illustrate how to draw these structures on graph paper.
Abhi rana)4. dry laid non woven fabricsAbhishek Rana
This document discusses dry laid non-woven fabrics. It describes the four phases of non-woven technology: fiber selection, fiber preparation, web formation and layering, and bonding and stabilization of the web. It then provides details on different fiber properties and various web formation methods like carding, garnetting, air laying and centrifugal dynamic random carding. Finally, it covers bonding methods for non-wovens like needle punching, stitch bonding, thermal bonding and hydroentanglement.
This presentation provides an overview of non-woven fabrics. It discusses the history and increasing production of non-wovens in Europe and the US. The main methods for producing non-woven fabrics are dry laying, wet laying, and spun melt. Key bonding methods are adhesive bonding, thermal bonding, and mechanical entanglement. Non-wovens are used in various industries like agriculture, construction, automotive, medical, and more. The manufacturing process involves fiber preparation, web formation, bonding, drying, and finishing. Cotton and polypropylene are common fibers used for non-woven production.
This document provides information about different types of yarn. It discusses that yarn is made up of twisted fibers or filaments that can be used for weaving or knitting. It then describes different types of yarns based on their material (staple vs filament), construction method (single, plied, cabled etc.), processing (combed vs carded), and other properties. Various terms related to yarn like count, twist and their importance are also explained. In addition, the document provides details on classifying and describing different yarns accurately.
Open-end spinning or rotor spinning is a technology for creating yarn without using a spindle. It separates fiber slivers into single fibers using an air stream and deposits them onto a collecting surface where they are twisted into yarn as it is drawn off. The principle is similar to a clothes dryer where individual sheets can be pulled out while twisting together. Fibers are fed onto the collecting surface which is continuously moving, aligning the fibers and twisting them into a thread that is wound onto a bobbin. Open-end spinning allows internal fiber stresses to relax and imparts twist directly onto the yarn end rather than drafting fibers. This makes the process faster and less labor intensive than ring spinning.
This document provides information on extra warp and weft figured fabrics. It discusses two methods of producing these fabrics: 1) using extra warp threads and 2) using extra weft threads. For extra warp fabrics, a separate warp beam is needed along with a dobby mechanism. For extra weft, a drop box mechanism is required. Both methods allow figuring in single or multiple colors. The document provides examples of motif designs and how the ground and extra threads interlace to produce the final figured fabric pattern.
The document discusses wrap spinning and friction spinning systems for yarn production, including descriptions of the wrap spinning and DREF friction spinning processes, their advantages and limitations, end uses of wrap yarns, manufacturers of wrap spinning machines, classifications of friction spinning systems, and features of the DREF-II and DREF-III friction spinning machines.
This presentation compares conventional and modern looms. Conventional looms operate more slowly with lower production capacity, while modern looms operate faster with higher output. Conventional looms are manually operated, while modern looms use electric power. Modern looms allow for more design variety and improved safety systems compared to conventional looms. Specific modern loom types discussed include rapier, air jet, water jet, and projectile looms, which utilize different automated processes for inserting the weft through the warp shed.
The document discusses various finishing processes used for wool fabrics, including methods to impart permanent set, control shrinkage, and moth proofing. It describes three main methods of permanent set - decatising, crabbing, and potting. Decatising uses steam under pressure to set the fibers, while crabbing uses heat and moisture. Potting involves boiling rolled wool fabrics to achieve a high degree of set. The document also covers concepts of shrinkage in wool and methods to control it, including landon shrinkage and compressive shrinkage treatments.
The document summarizes various types of textile finishing processes. It discusses classifications of finishing based on the nature of finish, degree of permanence, and performance. It then provides examples and brief explanations of common finishing processes like optical finishing, compacting, calendaring, brushing, raising, napping, shearing, resin finish, softener treatment, water repellent finish, and anti-microbial finish. The objectives and mechanisms of different finishes are also outlined.
Screen printing is a printing technique where a mesh is used to transfer ink onto a substrate, except in areas made impermeable to the ink by a blocking stencil. A blade or squeegee is moved across the screen to fill the open mesh apertures with ink, and a reverse stroke then causes the screen to touch the substrate momentarily along a line of contact.
Printmaking is a form of art that involves transferring ink from a matrix, such as linoleum, to paper to create multiple copies of the same artwork. The document discusses the history and types of printmaking, including relief printing which uses linocuts. It provides instructions for creating a linocut print, including sketching a design, transferring it to linoleum, carving away areas to create the design, inking the linoleum, and printing the design onto paper. Creating prints with multiple colors requires cleaning and re-carving the linoleum between applying each color.
This document provides information about a stencil cut printmaking lesson plan, including objectives, materials, procedures, and examples. The lesson plan teaches students to create stencil prints by using stencil cutters or knives to cut the negative space around an image, which is then printed using ink or paint. Examples are provided of stencil cut prints created by students and the instructor, Prasad Swain, featuring subjects such as people, animals, and objects. Background information is also given on the history and uses of the stencil technique.
This document provides an overview of intaglio printmaking techniques, both historically and in present day. It discusses the origins of intaglio, which involves cutting or etching into a plate to create recessed lines that hold ink for printing. Key intaglio methods mentioned include engraving, drypoint, mezzotint, aquatint, soft ground, and photogravure. The document traces the evolution and popularity of intaglio, noting it was pioneered by artists like Rembrandt and Goya but declined in the 20th century. However, intaglio is seeing a resurgence today through new techniques like acrylic resist etching and the integration of digital processes.
This document describes a project report submitted by Mr. Yogesh O. Kalambe on textile printing. The report discusses various traditional printing methods like block printing, resist dyeing, and discharge printing. It also describes the stages of textile printing including pre-treatment of fabric, preparation of colors and printing paste, applying the paste using printing methods, drying and fixing the print. Common thickening agents for printing paste like starch, gum, flour and albumen are also explained. The report provides detailed information on traditional textile printing techniques.
Etching was invented in the 15th century and involves etching a design onto a metal plate using acid. The plate is then inked and paper is pressed against it to transfer the design. It produces detailed prints but is time-consuming and requires chemicals. Linocut involves carving away parts of linoleum or wood to create the design. It is simpler than etching but produces rougher prints. Letterpress uses metal or wood plates with raised letters that are inked and pressed onto paper. It was invented by Gutenberg and advanced printing. Rotogravure is like etching but uses a metal cylinder. It can print in color and is used commercially for packaging. Photocopying involves charging a drum, exposing
The document provides an overview of the printing industry and the Safire Industries company. It discusses the evolution of printing from early woodblock printing to modern digital printing. It outlines four phases: 1) woodblock printing from China dating to 220AD, 2) movable type printing developed by Bi Sheng in China, 3) offset printing which transfers the image to a rubber blanket then to the surface, and 4) digital printing which now accounts for 9% of pages printed. It then provides details on the history and operations of Safire Industries, a leading commercial printing company located in Sivakasi, India.
The document provides an overview of the printing industry and the Safire Industries company. It discusses the evolution of printing from early woodblock printing to modern digital printing. It outlines four phases: 1) woodblock printing from China dating to 220AD, 2) movable type printing developed by Bi Sheng in China, 3) offset printing which transfers the image to a rubber blanket then to the surface, and 4) digital printing which now accounts for 9% of pages printed. It then provides details on the history and operations of Safire Industries, a leading commercial printing company located in Sivakasi, India.
This document provides an overview of intaglio printmaking techniques, including a brief history and definitions of key terms. It discusses various intaglio methods such as etching, engraving, drypoint, mezzotint, and aquatint. The text also covers the intaglio printing process, the development of techniques like photogravure, and the evolution of intaglio's popularity over time, from its golden age with Rembrandt to its decline and recent resurgence.
This thesis analyzes how digital technology has affected artistic processes. It discusses the work of three digital artists - Joan Truckenbrod, Cynthia Beth Rubin, and James Faure Walker - who pioneered the use of computers, tablets, and styluses between 1975-2005. Truckenbrod's early algorithmic works depicted invisible realms and tensions through monochromatic images. Over time, her art combined traditional and digital elements to communicate natural forces. Rubin and Walker also explored new techniques using digital tools, broadening their artistic expressions.
Digital/Computer Paintings as a Modern- day Igbo Artists’ vehicle for creatin...ikennaaghanya
Revolutions come in many varieties. Some tear down established notions destructively, while others consist of forging new paradigms through constructive means such as an ideological or technological innovation that fundamentally alters an individual or group’s creative path. But all have their place in history. This paper charts a course of change in art and art styles, as been practiced by some modern-day Igbo artists. It follows the meandering path that has been influenced by technological advances that have in turn influenced art culture and practices in technique. In particular, this paper examines how the modern-day processes of digital art have attempted to broaden the modern-day Igbo artist’s knowledge base, and has influenced new ways of doing old things. Together these ideas have impacted modern-day art by creating a fertile landscape allowing an artist’s inquisitive tendency to take root and uniquely flourish. The aim of this paper is to analyze the various digital paintings produced by three modern-day Igbo artists (Ikenna Aghanya, Okechukwu Johnson and Chidi Onwuekwe) and in turn examine how the use of the computer, as an art tool has affected their creative process. The paper will also look at the functions of this medium as it pertains to each of the decorative paintings done by these artists.
There are several types of fabric printing techniques, including block printing, roller printing, screen printing, heat transfer printing, ink-jet printing, and carpet printing. Block printing involves carving designs into wood blocks and applying color paste to print onto fabric. Roller printing uses engraved rollers to print multiple colors simultaneously onto fabric passing between rollers. Screen printing employs screens with cut-out designs to apply color paste in a controlled manner onto fabric.
This photo essay documents the screenprinting process as demonstrated by technician Peter McMorris at Cork Printmakers. Screenprinting involves forcing ink through a fine mesh screen to create printed designs. It is a traditional printmaking technique that remains popular today for printing t-shirts, posters, and other products. The process allows for creativity through color selection and design while producing unique, individual prints. Though labor intensive, screenprinting artists take pride in their craft and share their knowledge through workshops.
Etching is a printmaking technique where an artist scratches a design through an acid-resistant ground on a metal plate which is then dipped in acid to etch the design. The plate is then inked and printed, with the etched lines holding the ink. The document discusses the history of etching from the 15th century, profiles famous artists like Rembrandt and Picasso and their etching works, and describes different etching techniques like soft ground etching.
Printmaking involves creating artworks using ink on paper where multiple impressions can be made. There are different printmaking processes like relief, intaglio, planographic and stencil. Relief prints use a raised surface like woodcuts. Intaglio techniques use a surface below the plate. Prints can be classified by the type of surface and process used. Line is a basic element of art that can be used to control the eye, indicate edges, form, movement, value and light source. The document then provides instructions for making insect prints using styrofoam printing plates.
Traditional publishing techniques task 2 aHarmeet Kaur
The document discusses various traditional printing techniques including etching, linocut, screen printing, lithography, letterpress, gravure, and photocopying. It provides brief descriptions of the history and basic processes for each technique. Etching involves using acid to cut into metal plates to create designs. Linocut uses linoleum as a relief surface. Screen printing uses a mesh screen with a stencil to transfer ink. Lithography uses a plate with a relief image that is dampened and inked. Letterpress involves type and illustrations raised from a printing plate. Gravure engraves images onto printing cylinders. Photocopying makes copies of documents through a photocopier.
This document introduces David Bligh, an art teacher at Dexter Southfield school who has introduced a printmaking component to the arts department. Bligh has experience as both an artist and teacher, with his work shown in exhibitions around the world. As part of the printmaking program, Bligh's students have begun experimenting with printing presses to create books, dress patterns, and other works incorporating text. The program aims to give students experience with an artistic medium not commonly found in schools and encourage creative experimentation.
This document provides contact information for an office located in Nagpur, Maharashtra, India. It also mentions Disha, an eLearning app, and Photoshop but does not provide any other context around them. The document gives contact details for a specific office but does not clearly explain its purpose or any other significant details in only a few words.
The document discusses woven fabric design and structure. It explains that woven fabrics are formed by interlacing warp and weft yarns in different patterns called weaves. Computer-aided design (CAD) systems now allow designers to digitize artwork, assign weaves to create patterns, and simulate fabrics on screen. CAD has revolutionized the design process by making it faster and easier to modify designs and transfer files to looms for production.
textile manufacturing mohini create by rizwan qureshiMulti Addiction
The document discusses the various processes involved in textile manufacturing from fibre to fabric, including spinning of fibres into yarn, preparatory processes for weaving like warping and sizing, the weaving process itself using looms, and some details about types of looms and their functions. It provides an overview of the major steps and some technical descriptions of processes like sizing, shedding, picking, and beating-up that are involved in converting yarn into woven fabric.
The membership Module in the Odoo 17 ERPCeline George
Some business organizations give membership to their customers to ensure the long term relationship with those customers. If the customer is a member of the business then they get special offers and other benefits. The membership module in odoo 17 is helpful to manage everything related to the membership of multiple customers.
Integrated Marketing Communications (IMC)- Concept, Features, Elements, Role of advertising in IMC
Advertising: Concept, Features, Evolution of Advertising, Active Participants, Benefits of advertising to Business firms and consumers.
Classification of advertising: Geographic, Media, Target audience and Functions.
How to Show Sample Data in Tree and Kanban View in Odoo 17Celine George
In Odoo 17, sample data serves as a valuable resource for users seeking to familiarize themselves with the functionalities and capabilities of the software prior to integrating their own information. In this slide we are going to discuss about how to show sample data to a tree view and a kanban view.
Join educators from the US and worldwide at this year’s conference, themed “Strategies for Proficiency & Acquisition,” to learn from top experts in world language teaching.
Front Desk Management in the Odoo 17 ERPCeline George
Front desk officers are responsible for taking care of guests and customers. Their work mainly involves interacting with customers and business partners, either in person or through phone calls.
Principles of Roods Approach!!!!!!!.pptxibtesaam huma
Principles of Rood’s Approach
Treatment technique used in physiotherapy for neurological patients which aids them to recover and improve quality of life
Facilitatory techniques
Inhibitory techniques
How to Store Data on the Odoo 17 WebsiteCeline George
Here we are going to discuss how to store data in Odoo 17 Website.
It includes defining a model with few fields in it. Add demo data into the model using data directory. Also using a controller, pass the values into the template while rendering it and display the values in the website.
How to Configure Time Off Types in Odoo 17Celine George
Now we can take look into how to configure time off types in odoo 17 through this slide. Time-off types are used to grant or request different types of leave. Only then the authorities will have a clear view or a clear understanding of what kind of leave the employee is taking.
Delegation Inheritance in Odoo 17 and Its Use CasesCeline George
There are 3 types of inheritance in odoo Classical, Extension, and Delegation. Delegation inheritance is used to sink other models to our custom model. And there is no change in the views. This slide will discuss delegation inheritance and its use cases in odoo 17.
Ardra Nakshatra (आर्द्रा): Understanding its Effects and RemediesAstro Pathshala
Ardra Nakshatra, the sixth Nakshatra in Vedic astrology, spans from 6°40' to 20° in the Gemini zodiac sign. Governed by Rahu, the north lunar node, Ardra translates to "the moist one" or "the star of sorrow." Symbolized by a teardrop, it represents the transformational power of storms, bringing both destruction and renewal.
About Astro Pathshala
Astro Pathshala is a renowned astrology institute offering comprehensive astrology courses and personalized astrological consultations for over 20 years. Founded by Gurudev Sunil Vashist ji, Astro Pathshala has been a beacon of knowledge and guidance in the field of Vedic astrology. With a team of experienced astrologers, the institute provides in-depth courses that cover various aspects of astrology, including Nakshatras, planetary influences, and remedies. Whether you are a beginner seeking to learn astrology or someone looking for expert astrological advice, Astro Pathshala is dedicated to helping you navigate life's challenges and unlock your full potential through the ancient wisdom of Vedic astrology.
For more information about their courses and consultations, visit Astro Pathshala.
How to Install Theme in the Odoo 17 ERPCeline George
With Odoo, we can select from a wide selection of attractive themes. Many excellent ones are free to use, while some require payment. Putting an Odoo theme in the Odoo module directory on our server, downloading the theme, and then installing it is a simple process.
2. Project Report
On
Submitted by
Mrs. Jyotsna Chopkar
(Bachelor of Textile Science, III Year)
Under the Guidance of
Mrs. Snehal Rohadkar
BACHELOR OF TEXTILE SCIENCE
MAHALAXMI JAGDAMBA COLLAGE OF LIBRARY & INFORMATION SCEINCE
RASHTRASANT TUKDOJI MAHARAJ NAGPUR UNVIVERSITY,
NAGPUR.2018-2019
File
N
otC
opy
3. Is a record of dissertation work
Carried out by
Mrs. Jyotsna Chopkar
It is certified that all the corrections/suggestions
indicated for internal assignment have been
incorporated in the report. The project report has
been approved as it satisfies the academic
requirement in respect of project work
prescribed for the said degree
MAHALAXMI JAGDAMBA COLLAGE OF LIBRARY & INFORMATION SCEINCE
RASHTRASANT TUKDOJI MAHARAJ NAGPUR UNVIVERSITY,
NAGPUR.2018-2019
Mrs. Snehal Rohadkar
Guide
Mrs. Janvi Nandanvar
Principal
Mrs. Meghna Polkat
Head of
Department
File
N
otC
opy
4. Acknowledgement
“Many individuals with whose cooperation and motivation I could complete this
research work should be thanked. Though not all of them directly helped me, they
stood by me in very trying times with numerous words of encouragement and much
needed moral support.
First and foremost, I would like to thank my project guide prof. Snehal
Rohadkar. Whose valuable guidance, suggestions and constructive criticism has
helped me bring this project to its present form.
I am grateful to prof. Meghna Polkat H.O.D of textile, M.J.College Nagpur for
their help, encouragement and other facilities extended while carrying out the
project.
I am thankful to prof. Dilip Varma, In-charge MGIRI lab, Wardha, prof. cinnur,
MGIRI Wardha, who had helped and assisted me in completing my project.
Little room to write and so many people are there, I take this opportunity to
thank all faculty members and non-teaching staff members of M.J.College,
particularly from printing, textile physics departments for their kind cooperation
during the project work.
The support I received from all my family members and friends was valuable,
without their support it would not have been possible to come out with this project
work. I am thankful to them all.
Mrs. Jyotsna Chopkar
File
N
otC
opy
5. CONTENTS
INTRODUCTION OF PRINTING
INTRODUCTION OF SCREEN PRINTING
HISTORY OF SCREEN PRINTING
File
N
otC
opy
7. 2
INTRODUCTION OF PRINTING
Textile printing is the process of applying colour to fabic is definite
patterns or designs. In properly printed fabrics the colour is bonded with the fiber, so as
to resist washing and friction. In printing one or more colours are applied to it in certain
parts only, and in sharply defined patter.
In short, printing applying coloured patterns and design to decorate a
finished fabric is called ’printing’.
INTRODUCTION OF SCREEN PRINTING
We have so far, studied the meaning of the original surface, and the
different printing system thereof. Now we shall study the procedures these printing jobs
under go, before the actual printing.
In the letter press, movable types are used. In this system, the jobs
undergo a unigue out –dated procedure. The matter is composed and proof is taken on
a manual instrument meant for it. This proof is then, sent to the customer for proof-
reading, after the proof is read, corrections, are made, and then the printing is done.
This procedure does not give any choice to the customer. This is the
reason, this procedure has become outdated in today’s advertisement oriented world.
What then is really required is the prior choice of type styles, their sizes, their alignment
illustrations, photographs, the different aesthetic way to make the product more and
more attractive, and the choice that aim at cost effectiveness.
Therefore, to facilitate the need of better choice, to increase the
quality of reproduction, to fulfill the urge of effective advertisement, to eradicate the
possibility of repetitive errors, to provide an easy storage and easier retrieval there after,
and also, to make the printers work more systematic every job that comes under
’printing’ in the modern times has to pass the following.
File
N
otC
opy
8. 3
Visualization/ sample (in cases of preced)
a) a block or flexo-plate for letter press system
b) a plate for off-set or gravure system
c) A screen for screen printing
Every work has to pass through these phases, and final printing takes
place only there after. The first three steps are common, irrespective of what printing
system it is.
1. VISUALISTION
Now let us imagine, that we have decided to construct a building. Can we start
the construction as soon as we decide? No, certainly not. We have to go to an architect
first, who will provide us with a model of our choice. This model, is the sample of how
the building should look like, after its completion. This model will give us better
information about location of rooms, staircase , door , windows , the sizes there of :as
also the color scheme best suitable for the building etc. this will facilities choice and
architect will provide us with the plan for the construction of building. The actual work
with start only thereafter.
Likewise in printing industry a printer’s role is that of a builders. He goes
to a commercial artist who conceives an idea best suited for a given job. He then
presents the idea, so conceived, in the form of a sketch or drawing.
HISTORY OF SCREEN PRINTING
Screen printing first appeared in a recognizable form in china during the song Dynasty
(960-1279 AD). It was then adapted by other Asian countries like Japan, and was
furthered by creating newer methods.
Screen printing was largely introduced to Western Europe from Asia sometime
in the late 18th century, but did not gain large acceptance or use in Europe until silk
mesh was more available for trade from the east and a profitable outlet for the medium
discovered.
File
N
otC
opy
9. 4
Early in the 1910s, several printers experimenting with photo-reactive chemicals
used the well-known actinic light activated cross linking or hardening traits of potassium,
sodium or ammonium chromate and dichromate. Chemicals eithglues and gelatin
compounds, Roy beck, Charles peter and Edward Owens studies and experiments with
chromic acid salt sensitized emulsion for photo-reactive stencils. This trio of developers
would prove to revolutionize the commercial screen printing industry by industry by
introducing photo-imaged stencils to the industry, through the acceptance of this
method would take many years. Commercial screen printing now uses sensitizers far
safer and less toxic than bichromates. Currently there are large selections of
presensitizes and ‘user mixed’ sensitized emulsion chemical for creating photo-reactive
stencils.
A group of artist who later formed the national serigraphic society including
WPA artist Anthony velonis coined the word serigraphy in the 1930s to differential the
artistic application of screen printing from the industrial use to the process. ’serigraphy’
is a compound word formed from Latin ‘serium’ and Greek ‘graphein’.
The printers national environmental assistance center says ‘screen printing’ is
arguably the most versatile of all printing process. Since rudimentary screen-printing
materials are so adorable and readily available, it has Benn used frequently in
underground setting and subcultures, and the nonprofessional look of such DIY culture
screen-prints have become a significant cultural aesthetic seen on movie poster , record
album covers , flyers, shirts , commercial fonts in advertising , in artwork and elsewhere
1960s to presents.
Credits is generally given to the artist Andy Warhol for popularizing screen
printing as an artistic technique , identified as serigraphy, in the united states. Warhol
was supported in this production by master screen printer Michel caza , a founding
member of fespa , and is particularly identified with his 1962 depiction of actress Marilyn
Monroe, known as the Marilyn diptych , screen printed in garish colours.
File
N
otC
opy
10. 5
Sisters Mary corita kent , gained international fame for her vibrant serographs
during the 1960s and 1970s. Her works were rain bow colored, contained words that
were both political and fostered peace and love and caring.
American extrepreneur, artisr and inventor michael vasilantane started to use
,develop, and sell atotable multicolour garment screen printing machne in 1960s ,
vasilantone later filled for patent on his invention in 1967 granted number 3,427,964 on
feb 18 , 1969. The original machine was manufactured to print logos and team
information on bowling garments but soon directed to the new fad of printing on T-
shirts. The vasilantone patent was licensed by multiple manufacturing , the resulting
production and boom in printed T shirts made this garment screen printing machine
popular.creen printing on garment currently accounts for over half of the screen printing
activity in the united states.
Graphic screenprinting is widely used today a create mass or large batch
produced graphics , such as posters or display stands. Full colour prints can be created
by printing in cryan, margenta , yellow and black.
Screen printing lends itself well to printing in canvas. Andy warhol , arthur okanurd
, robert Rauschenberg , roy lichtenstein , Harry have used screen printing as an
expression of creativity and artistic vision.
File
N
otC
opy
13. 8
1. Block printing
The blocks are usually made of wood and the design is hand
carved, so that it stands out in relief against the back ground surface. The print paste is
applied to the design surface in the block and the block then pressed against the fabric.
The process is repeated with different designs and colours unit the pattern is complete.
2. Screen printing
This type of printing has increased enormously in its use in recent
years because of its versatility and the development of rotary screen printing machines
which are capable of very high rates of production. An additional significant advantages
is that heavy depths of shade can be produced by screen printing, a feature which has
always been a limitation of roller printing because of the restriction to the amount of print
paste which can be held in the shallow depth of the engraving on the print roller.
3. Roller printing
Roller printing has traditionally been preferred for long production
runs because of the very high speeds possible. It is also a versatile technique since up
to a dozen different colours can be printed simultaneously. The basic roller printing
equipment, consist of a number of copper faced roller in which the design is etched.
There is a separate printing roller for each colour being printed. Each of the rollers
rotates over the fabric under pressure against on iron pressure roller.
4. Batik printing
Batik involves decorating cloth by covering a part of it with a
coat of wax. The waxed areas keep their original color and when the wax is removed
the contrast between the dyed and undyed area gives the pattern. One of the significant
features of this art is that it is very simple and can be done by anyone.
File
N
otC
opy
14. 9
5. ink-jet printing
There has been considerable interest in the technology
surrounding non-impact printing, mainly for the graphic market, but the potential benefits
of reductions in the time scale from original design to final production has led to much
activity in developing this technology for textile and carpet printing process.
6. Carpet printing
The printing of carpets only really achieved importance
after the introduction of tufted carpets in the late 1950s. Until then the market was
dominated by the woven wilton carpets and ax minster designs were well established,
but by the 1980s tufted carpet production accounted for some 80% of UK production.
7. Direct printing
A process where the colors for the desired designs are
applied directly to the white or dyed cloth as distinguished from discharge printing and
resist printing.
8. Discharge printing
In “white” discharge printing the fabric is piece dyed, the
printing with a paste containing a chemical that reduces the dye and hence removes the
color where the white designs are desired. In “coloured” discharge printing, a color is
added to the discharge paste in order to replace the discharged color with another
shade.
9. Duplex printing
A method of printing a pattern on the face and back of a fabric with equal clarity.
File
N
otC
opy
16. 11
Screen printing is a printing technique whereby a mesh is used
to transfer ink onto a substrate, except in areas made impermeable to the ink by a
blocking stencil. A blade or squeegee is moved across the screen to fill the open mesh
apertures with ink, and a reverse stroke then causes the screen to touch the substrate
momentarily along a line of contact. This causes the ink to wet the substrate and be
pulled out of the mesh apertures as the screen springs back after the blade has passed.
Screen printing is also a stencil method of print making in which
a design is imposed on a screen of polyester or other fine mesh, with blank areas
coated with an impermeable substance. Ink is forced into the mesh openings by the fill
blade or squeegee and by wetting the substrate, transferred onto the printing surface
during the squeegee stroke. As the screen rebounds away from the substrate the ink
remains on the substrate. It is also known as silk-screen, screen, serigraphy, and
serigraph printing. One color is printed at a time, so several screen can be used to
produce a multicolored image or design.
There are various terms used for what is essentially the
same technique. Traditionally the process was called screen printing or silkscreen
printing because silk was used in the process prior to
the invention of polyester mesh. Currently, synthetic
threads are commonly used in the screen printing
process. The most popular mesh in general use is
made of polyester. There are special-use mesh
materials of nylon and stainless steel available to the
screen printer. There are also different types of mesh size which will determine the
outcome and look of the finished design on the material.
File
N
otC
opy
17. 12
A screen is made of a piece of mesh stretched
over a frame. The mesh could be made of a synthetic polymer, such as nylon, and a
finer and smaller aperture for the mesh would be utilized for a design that requires a
higher and more delicate degree of detail. For the mesh to be effective, it must be under
tension. The frame which holds the mesh could be made of diverse materials, such as
wood or aluminum, depending on the sophistication of the machine or the artisan
procedure. The tension of the mesh may be checked by using a tensiometer; a common
unit for the measurement of the tension of the mesh is Newton per centimeter (N/cm).
A stencil is formed by blocking off parts of the screen in the
negative images of the design to be printed; that is, the open spaces are where the ink
will appear on the substrate.
Before printing occurs, the frame and screen must undergo
the pre-press process, in which an emulsion is ‘scooped’ across the mesh and the
‘exposure unit’ burns away the unnecessary emulsion leaving behind a clean area in the
mesh with the identical shape as the desired image. The surface to be printed
(commonly referred to as a pallet) is coated with a wide ‘pallet tape’. This serves to
protect the ‘pallet’ from any unwanted ink leaking through the screen and potentially
staining the ‘pallet’ or transferring unwanted ink onto the next substrate. Next, the
screen and frame are lined with a tape. The type of tape used in for this purpose often
depends upon the ink that is to be printed onto the substrate. These aggressive tapes
are generally used for UV and water –based inks due to the inks’ lower viscosities. The
last process in the ‘pre-press’ is blocking out any unwanted ‘pin-holes’ in the emulsion.
If these holes are left in the emulsion, the ink will continue through and leave unwanted
marks. To block out these holes, materials such as tapes, speciality emulsions and
‘block-out pens’ may be used effectively.
The screen is placed atop a substrate. Ink is placed on top
of the screen, and a flood bar is used to push the ink through the holes in the mesh. The
File
N
otC
opy
18. 13
operator begins with the fill bar at the rear of the screen and behind a reservoir of ink.
The operator lifts the screen to prevent contact with the substrate and then using a
slight amount of downward force pulls the fill bar to the front of the screen. This
effectively fills the mesh opening with ink and moves the ink reservoir to the front of the
screen. The operator then uses a squeegee (rubber blade) to move the mesh down to
the substrate and pushes the squeegee to rear of the screen. The ink that is in the
mesh opening is pumped or squeezed by capillary action to the substrate in a controlled
and prescribed amount, i.e. the wet ink deposit is proportional to the thickness of the
mesh and or stencil. As the squeegee moves toward the rear of the screen the tension
of the mesh pulls the mesh up away from the substrate (called snap off) leaving the ink
upon the substrate surface.
There are three common types of screen printing presses.
The ‘flat-bed’, ‘cylinder’, ‘rotary’.
Textile items printed with multicolored designs often use a
wet on wet technique, or colours dried while on the press, while graphic items are
allowed to dry between colours that are then printed with another screen and often in a
different colour after the product is realigned on the press.
Most screens are ready for re-coating at this stage, but
sometimes screens will have to undergo a further step in the reclaiming process called
dehazing. This additional step removes haze or “ghost images” left behind in the screen
once the emulsion has been removed. Ghost images tend to faintly outline the open
area of previous stencils, hence the name. They are the result of ink residue trapped in
the mesh, often in the knuckles the mesh (the point where threads cross).
While the public thinks of garment in conjunction with screen
printing, the technique is used on tens of thousands of items, including decals, clock and
watch faces, balloons, and many other products. The technique has even been adapted
for more advance uses, such as laying down conductors and resistors in multi-layer
circuits using thin ceramic layers as the substrate.
File
N
otC
opy
19. 14
Screen printing, also called serigraphy or silk
screening, is a technique of applying ink onto material (like paper, fabric, or canvas)
using a woven mesh and a stencil. The stencil is attached to the mesh or is created
on the mesh with photo- reactive chemical emulsions, and the ink is presses through
the mesh onto the material with a squeegee or a rubber blade. The stencil allows the
ink to pass through only where the artwork is located, leaving the design on the
material.
Because this process is relatively simple and the materials needed are fairly
inexpensive and easy to obtain, screen printing is a popular craft for hobbyists and
individual artists, as well as for commercial production. Those who are interested in
successful screen printing can benefit from a brief history of screen printing and from
an explanation of the eight steps for creating a screen print using photosensitive
emulsions, including several tips for doing each step successfully. They can also
search for and purchase screen printing materials and equipment at brick and mortar
craft stores.
The process of screen printing using mesh stencils made with
photosensitive chemical emulsions are explained below, with helpful tips for each
step to enable any artist (whether novice or expert) to achieve success in screen
printing.
File
N
otC
opy
20. 15
A. Choose or create the artwork to be
screen printed
The best way to prepare artwork to be screen printed is
to have it copied onto a transparency. Most copy shops do this for a very small fee.
Original artwork can be painted directly onto a transparency or onto any piece of sturdy,
clear plastic. Beginners should create simple designs with fairly clear, thick lines since
screen printing delicate, fine – lined artwork can be tricky.
The objective is to create what artists call a “film positive” of
the artwork, which is 100 % black on a clear background. Whether it is printed or hand-
drawn, the artwork blocks the emulsion on the screen and the emulsion is washed off
the design, allowing the ink to pass through the screen and transfer the design onto the
T- shirt or other object that is imprinted.
File
N
otC
opy
21. 16
B. Gather the materials needed for
screen printing
Once the artwork to be screen printed has been selected and prepared, it is time
to gather the rest of the necessary materials and equipment. Object to be printed.
The screen printing can be done on paper, on canvas, or on just about anything
made from fabric, like a T- shirt, a tablecloth and napkins, a scarf, or simply a piece of
fabric that is framed and hung as art. The object should be clean and ready to absorb
the ink.
Screen frame.
The screen frame is usually made
of wood and is very tightly covered with a fine
mesh material. This is the screen through which
the ink is transferred onto the object to be printed.
Metal screens are the most durable and stand
up to many washing and printings.
Black paper, plastic, or fabric. This flat black
object should be large enough on which to place the
frame is the surface on which the screen is placed
to burn the image onto the screen.
Photosensitive Emulsion and Activator. The sensitizer
and Emulsion come separately and must be mixed
together and applied to the screen. Users must make sure to
Mix enough to thoroughly cover the screen. Screen printing ink. Users need to buy
enough screen printing ink to transfer the design to the object being printed. It might be
fun to choose several different colors and make several versions of the screen print art.
Squeegee. A squeegee is an important tool in screen printing. It is used to apply and
spread the ink through the screen onto the T- shirt or other object. Squeegees are
available in several different sizes, and they are made from a single piece of vinyl or
from a comfortable wooden holder with a rubber blade.
File
N
otC
opy
22. 17
C. Prepare the frame and screen
Some people make their own mesh screens for printing by
taking an old wooden picture frame and covering it tightly with an organdy silk screen
fabric, or even cut- up old gauzy nylon curtains. Users should make sure that the fabric
is stretched as tight as possible and is secured thoroughly with a staple gun applied all
around the frame. It is important to keep the fabric straight so that the holes in the mesh
of the fabric allow the ink to pass through it evenly.
A commercially prepared screen that has already been used
should be prepared for printing by washing it thoroughly with a mild abrasive to ensure
that none of the holes are clogged with dirt, grease, or previously used ink. The screen
should also be allowed to dry thoroughly.
File
N
otC
opy
23. 18
D. Spread the photo emulsion onto the
screen
First, users should mix the sensitizer and the
emulsion thoroughly according to the directions on the containers. The emulsions are
light- sensitive liquid chemicals that are applied to the screen, and they become more
sensitive as they dry.
The side of the screen that comes in contact with the object to be printed is known as
the substrate side, while the side where the ink is placed and pushed through the
screen is called the “inkwell” side. Both side need to be covered with the emulsion
mixture, and it is best to begin on the substrate side. Some people prefer to place the
screen on top of a piece of black fabric or plastic. Users should pour some it thinly and
evenly, making sure that all of the holes are covered.
Next, users should place the screen in a dark place to dry (a closet works well). Some
people like to point a fan at the screen to help it dry faster. Users need to make sure
that the emulsion on the screen has dried completely, and this can take as little as a
couple of hours or as long as overnight.
E. Burn the images onto the screen.
The next steps are to attach the artwork to the screen and
expose it all to light in order to burn the images onto the screen, so that the ink can
pass through the screen and be transferred to the object being printed.
Attaching the Artwork.
Once the emulsion on the screen is completely dry, users
should lay it down on top of a clean piece of black cloth or sturdy paper, with the
substrate side facing down and the inkwell side facing up. They should then lay the
template with the design on it down on the inkwell side of the screen and attach it with
tape. Alternatively, they could also lay a piece of clean glass on top of the artwork, while
making sure that the glass is bigger than the design while still fitting inside the frame.
File
N
otC
opy
24. 19
If the emulsion being used is highly photosensitive, it may be
best to do this step in a fairly dark room so that the emulsion does not begin to react to
the light until the artwork is securely in place.
Exposing the screen to light.
Next, they should place a lamp with a 200- or 250- watt bulb
about a foot or two above the screen. Professional screen printing lamps are also
available for purchase, while some people like to take the frame with the artwork
attached outdoors so that the UV rays of the sun burn the images. With the exposure to
light, the emulsion hardens, and the area of the screen that is covered by the design
does not harden. Usually 10 to 15 minutes is enough time for this process to be
complete.
F. Rinse the screen
Once the photosensitive emulsion has hardened, users should
remove the artwork and rinse the screen under very cold water. This can be done in a
shower or tub, or outdoors with a garden hose. The emulsion that was under the design
flakes off. It may be necessary to gently rub the area where the emulsion is being
removed, using a hand or the scratchy side of a kitchen sponge . once the screen is
thoroughly rinsed, the design should be visible as a see- through part of the screen, like
a stencil made out of mesh.
G. print
For the printing stage, it is a good idea to put masking tape or
painter`s tape along the edges of the screen to prevent any sloppy leaks. Users should
place the fabric or object to be printed down on some newspapers to protect the surface
underneath. It is important to work on a flat surface so that the images is not distorted.if
it is a T- shirt that is being printed, users can place some layers of paper or cardboard
inside the shirt to prevent the ink from leaking through to the other side of the shirt.
File
N
otC
opy
25. 20
When users are ready to begin the printing process, they can lay
the screen down with the substrate side touching the fabric to be printed. Next, they can
pour a small amount of ink horizontally across the top of the screen and use a
squeegee to pull the ink down across the image, pressing the ink through the screen
onto the fabric underneath. They can then move the squeegee up and down and back
and forth to ensure that the ink is pressed through the screen thoroughly and evenly.
The screen should be held in place, or else the images may not comes through crisply.
At this point, the artwork should be in printed form.
File
N
otC
opy
26. 21
H. Cure and clean up
Some screen printing ink manufactures recommend
“curing”, which is placing the printed object in an oven preheated to 400 degrees F for
just about 30 seconds. Other ink makers recommend ironing the back of the printed
fabric to help set the ink. Users should be sure to follow the manufacturer
recommendations on the ink being used.
File
N
otC
opy
28. 23
Printing Process:
Printing, like dyeing, is a process for applying colour to a substrate. However, instead
of colouring the whole substrate (cloth, carpet or yarn) as in dyeing, print colour is
applied only to defined areas to obtain the desired pattern. This involves different
techniques and different machinery with respect to dyeing, but the physical and
chemical processes that take place between the dye and the fibre are analogous to
dyeing.
A typical printing process involves the following steps:
Color paste preparation:
When printing textiles, the dye or pigment is not in an aqueous liquor, instead, it is
usually finely dispersed in a printing paste, in high concentration.
Printing:
The dye or pigment paste is applied to the substrate using different techniques, which
are discussed below.
File
N
otC
opy
29. 24
Fixation:
Immediately after printing, the fabric is dried and then the prints are fixed mainly with
steam or hot air (for pigments). Note that intermediate drying is not carried out when
printing carpets (too much energy would be needed for removing the highly viscous
liquor).
After-treatment:
This final operation consists in washing and drying the fabric (it is not necessary when
printing with pigments or with other particular techniques such as transfer printing).
When describing the different printing techniques, a distinction should be made
between printing with pigments, which have no affinity for the fibre, and printing with
dyes (reactive, vat, disperse, etc.).
Printing with Pigments:
Pigment printing has gained much importance today and for some fibres (e.g.
cellulose fibres) is by far the most commonly applied technique. Pigments can be used
on almost all types of textile substrates and, thanks to increased performance of
modern auxiliaries, it is now possible to obtain high-quality printing using this technique.
Pigment printing pastes contain a thickening agent, a binder and, if necessary, other
auxiliaries such as fixing agents, plasticizers, defoamers, etc.
White spirit-based emulsions, used in the past as thickening systems, are used only
occasionally today (mainly half-emulsion thickeners). More information regarding the
characteristics of the auxiliaries used can be found in Section.
After applying the printing paste, the fabric is dried and then the pigment is normally
fixed with hot air (depending on the type of binder in the formulation, fixation can also be
File
N
otC
opy
30. 25
achieved by storage at 20 °C for a few days). The advantage of pigment printing is that
the process can be done without subsequent washing (which, in turn, is needed for
most of the other printing techniques).
Printing with Dyes:
Printing paste preparation:
The process traditionally starts with the preparation of the paste. Compared to pigment
printing, the composition of the pastes is more complex and variable, being determined
not by the dye used, but by the printing technique, the substrate, the application and the
fixation methods applied.
Apart from the dye, printing pastes contain a thickening agent (see also Section) and
various other auxiliaries, which can be classified according to their function as follows:
Oxidizing agents (e.g. m-nitrobenzenesulphonate, sodium chlorate, hydrogen
peroxide)
Reducing agents (e.g. sodium dithionite, formaldehyde sulphoxylates, thiourea
dioxide, tin(II) chloride)
Discharging agents for discharge printing (e.g. anthraquinone) Substances with a
hydrotropic effect, like urea.
Dye solubilisers, which are polar organic solvents like glycerine, ethylen glycol,
butyl glycol, thiodiglycol, etc.
Resists for reactive resist printing (e.g. sulphonated alkanes).
Defoamers, (e.g. silicon compounds, organic and inorganic esters, aliphatic esters,
etc.).
All the necessary ingredients are metered (dosed) and mixed together in a mixing
station. Since between 5 and 10 different printing pastes are usually necessary to print
a single pattern (in some cases up to 20 different pastes are applied), in order to reduce
losses, due to incorrect measurement, the preparation of the pastes is done in
automatic stations. In modern plants, with the help of special devices, the exact amount
of printing paste required is determined and prepared in continuous mode for each
printing position, thus reducing leftovers at the end of the run.
It is common practice in many printing houses to filter the printing pastes before
application, using for example a filter cloth. This operation is especially important for
thickeners to prevent free particles from blocking the openings of the screens.
File
N
otC
opy
32. 27
After preparation, the paste is applied to specific areas of the textile using one of the
following techniques:
1. Direct printing (which also includes digital and transfer printing)
2. Discharge printing
3. Resist printing.
In the case of direct printing the dye is applied to specific areas of a pretreated
textile substrate, which can be white or pre-dyed (in light colours).
It is possible to speak of discharge printing, if in the fixation process that follows the
application of the printing paste there is local destruction of a dye applied
previously. If the etched (discharge), previously dyed area becomes white, then the
process is called white discharge. If, on the contrary, a coloured pattern has to be
obtained in the etched area after the destruction of the previously applied dye, then
the process is called coloured discharge. In this case the printing paste must
contain a reduction-resistant dye along with the chemicals needed to destroy the
previous one. As a result the pre-dyed background is destroyed according to a
pattern and the dye, which is resistant to reduction, takes its place.
In the case of resist printing, a special printing paste (called «resist») is printed onto
certain areas of the fabric to prevent dye fixation. In the case of physical resist the
material is printed with a difficult-to-wet resin that inhibits the penetration of a dye
applied in a second stage. On the other hand, with a chemical resist, dye fixation is
prevented by a chemical reaction. Depending on the way the process is carried out,
one can speak of pre-printing, intermediate or over-printing resists. One common
procedure is the wet-on-wet process in which the resist paste is initially printed,
then the material is overprinted with full cover screen and finally fixed and washed.
Over-printing resists can be applied only if the dye, already present in the
previously dyed and dried fabric, is still in its unfixed form, as in the case of
developing dyes.
The difference between transfer printing and the techniques described earlier is that
with this technique the surface of the fabric is not directly printed. Instead, the
pattern is first created on an intermediate carrier (e.g. paper) using selected
disperse dyes and then it is transferred from there to the fabric. The dye is usually
fixed by placing the printed paper in contact with the fabric into a thermal pressure
system. Under the influence of the heat the dye sublimates and diffuses from the
carrier into the fibre of the textile substrate. There is no need for further treatment
such as steaming, washing, etc. This technique is applied for polyester, polyamide
File
N
otC
opy
33. 28
and some acrylic fibres, using selected disperse dyestuffs according to the specific
type of fibre.
Fixation:
After printing, the fabric is dried. Water evaporation leads to an increase in dye
concentration and at the same time prevents the colours from smearing when the fabric
is transported over the guide rollers. At this stage the dye is not yet fixed.
The aim of the subsequent fixation step is to transport as much as possible of the dye,
which is retained by the thickener, into the fibres. This is especially important with dyes,
such as vat dyes, for example, that are printed in the insoluble form and are converted
into the corresponding soluble state only after reaction with the reducing agents during
the fixation process.
Fixation is usually carried out with steam. Water vapour condenses on the printed
material, swells up the thickener, heats the print and provides the necessary transport
medium for the diffusion of the dye. The distribution of the dye between fibre and
thickener is an important factor in determining the fixation degree of the dye, which is
called the "retaining power" of the thickener. The thickener, in fact, is often composed of
polysaccharides and therefore competes with cellulose in retaining the dye. This is the
main reason why the fixation rate of a given dye is 10 % lower in printing than in
dyeing.
After-treatment:
The last step of the printing process consists in washing and drying the fabric. When
printing with insoluble dyes such as vat dyes this operation also serves as a means to
re-convert the dye to the original oxidised state. In this case, after an initial rinsing with
cold water, the printed material is treated with hydrogen peroxide. The process is
completed with a soap treatment with sodium carbonate at the boiling point.
As already explained, washing is not necessary with pigment printing and transfer
printing. This holds for any dyeing/ printing system where thickeners are not needed
and where the dyestuff is (nearly) completely fixed (e.g. printing carpet tiles with digital
jet printing techniques, see Section).
File
N
otC
opy
34. 29
Printing Auxiliaries:
Auxiliaries for dye printing:
Thickening agents:
Thickening agents are essential components of printing pastes. They are responsible
for preventing capillary flow between the threads of the fabric, thus inhibiting dye
diffusion. Oil/water emulsions, used in the past as thickeners, have now been largely
replaced by formulations similar to those used for warp sizes. Standard components of
modern thickeners include natural polysaccharides, both unmodified and chemically
modified (e.g. seed derivatives, starch degradation products, alginates) and fully
synthetic polymers (mainly based on polyacrylic acid). Thanks to the improvements
made in the characteristics of the starting materials, thickening agents are now supplied
almost exclusively in cold-soluble form.
Auxiliaries for Pigment Printing:
Thickening agents:
Water-in-oil emulsions were widely used in the past as thickeners. They contained up to
70 % of white spirit (mixture of aliphatic hydrocarbons with C12-C50 chain length),
which resulted in emissions of volatile organic carbon in the exhaust air from drying and
curing ovens. Half-emulsion printing pastes (oil in water) are only occasionally
employed today. Nevertheless, modern thickeners can still contain approximately 10 %
of mineral oils, which are ultimately found in exhaust air. New generation thickeners
have been developed which do not contain any volatile solvents. They are supplied in
the form of non-dusting granules [64, BASF, 1994].
Binders:
The pigment has no affinity for the fibre. Therefore, in order to coat the pigment and
protect it from mechanical abrasion, a binder is added to the printing paste. Binders are
in general self-cross-linking polymers which reticulate during the fixation step. They are
supplied as aqueous polymer dispersions, based mainly on acrylates and less
commonly on butadiene and vinyl acetate.
File
N
otC
opy
35. 30
Fixing agents :
Additional fixing agents are sometimes necessary to enhance the level of wet-
fastness, especially with smooth fibres such as PES. Melamine-formaldehyde
condensates are used for this purpose. In order to reduce the consequent formaldehyde
emissions, modified compounds of the same chemical type, but with a low
formaldehyde content, are now common.
Plasticisers :
Plasticisers are mainly silicones or fatty acid esters, which are used to improve the dry
rubbing fastness and give a smooth dry handle to the fabric.
Emulsifiers:
In high- and low solvent pigment printing pastes, the emulsifiers serve to stabilise the
solvent (white spirit). In solvent-free pigment printing they are used to prevent
agglomeration of the pigment, screen blocking and separation of components of the
print paste [186, Ullmann's, 2000]. Non-ionic surfactants such as aryl- and alkyl
polyglycol ethers are the most commonly used for this purpose.
File
N
otC
opy
38. 33
The textile industry probably makes the largest
use of the screen printing technique. Screen printing is used to print on fabrics ranging
from cotton and organza to silk and polyester. These fabrics are then made into finished
product. The finished products include shirts, skirts, dresses, children`s clothing and any
kind of clothing made from printed the fabric. In fact many designers set up their own
screen printing units since they are so cheap.
The designer then creates his or her own design and
screen prints it in limited quantities for sale with his or her brand label. Screen printing is
also used for upholstery, linen, curtains, drapes, cushion covers, bed sheets, bedcovers
and other household and lifestyle requirements.
The other industry that makes extensive use of screen
printing is the marketing and advertising industry. Flyers, posters, handouts,
advertisement and other point of sale or graphics products are all screen printed. The
advertising industry uses screen printing primarily because it generally requires limited
edition printing. The costs of printing small quantities digitally or electronically can be
very high. Hence screen printing to the rescue.
The sports industry also uses screen printing to print
souvenirs and collectible items. T- shirts printed with the logos of popular teams,
souvenirs like caps, sweatshirts, mouse pads, key chains, baseball bats and a host of
other items are all screen printed. Thus, screen printing has innumerous applications.
Everywhere you look you will find examples of screen printing. Some are overt and
others will be disguised.
File
N
otC
opy
40. 35
Advantages of Hand Screen Printing:
There are several advantages of hand screen
printing that we must have to know. These are –Less investment cost: As there is no
machine required in hand screen printing and it is possible to print in a shorter space;
the total investment in hand screen printing is comparatively lower than other screen
printing system.
No Risk: No heavier instrument or machine tools are used in hand screen printing.
So, there is no risk.
Multi-color design can be printed: In hand screen printing procedures various
colors can be used effectively.
Less floor space is required: As no heavier and bigger machines and related
tools are used, the hand screen printing want to install a screen printing factory for you
local business, you can choose the hand screen printing at the initial stages as it
requires lower cost or investment.
File
N
otC
opy
41. 36
Disadvantages of Hand Screen Printing:
Besides the advantages of hand screen printing; we have
to know about the disadvantages of hand screen printing too. Because it is needed
for developing the process or solving any problems occurred during installation.
Slow production rate: As no machine is used and all of the process are done by
manually; the production rate becomes lower than other printing process.
Small scale production: If you want to own a big screen printing factory or if
you have some bigger plan in future; the printing is not for you. Due to some reason
this kind of printing process provides you lesser production rate.
Labor intensive process: A labor has to work manually and all of the process
of the hand screen printing is done by the hands. So it needs more time to produce a
product.
Fastness properties are average: As all of the process is done manually, the
fastness properties of the printed fabric is not well. Difficult to maintain even
penetration and print paste.
Skilled man- power is required.
File
N
otC
opy
43. 38
Screen printing is an ancient art and is one that can be practiced by anyone
from commercial producers to casual hobbyists. Whether creating screen
printed T-shirts to sell for a school fundraiser, giving new life to a drab old
tablecloth, or simply making something beautiful to hang in a home, screen
printing can provide a creative outlet with very practical applications.
It is important for anyone who is going to attempt to do screen printing using
photosensitive chemical emulsions to understand the entire process. This
information helps artists, whether beginners or experienced, to go through
the screen printing process with confidence. It also offers helpful tips for
creating the artwork, gathering the necessary materials, preparing the screen,
applying the emulsion, burning the image, rinsing the screen, the actual
printing itself, and finally curing the finished product and cleaning up. By
following the above tips, anyone can be successful in their next screen
printing project.
File
N
otC
opy