Microsoft Lync Server 2010 Installation

Microsoft Lync Server 2010 Installation
A Step by Step Guideline
Shahab Al Yamin Chawdhury
6/1/2011

Prepared by Shahab Al Yamin Chawdhury (http://mobs-bd.org) Page 1 of 3
Microsoft Lync Server 2010 Installation Notes
1. Microsoft .NET Framework 3.5 with SP1
2. You should also apply the update discussed in Microsoft Knowledge Base article 981575, “A memory leak
occurs in a .NET Framework 2.0-based application that uses the AesCryptoServiceProvider class,” at
http://go.microsoft.com/fwlink/?LinkId=202909.
3. Install the fix from the link
http://support.microsoft.com/kb/975954
4. Install Message Queuing
http://technet.microsoft.com/en-us/library/cc730960.aspx
5. Lync Server 2010 Setup or Remove Lync Components fails on Windows Server 2008 R2 SP1:
http://support.microsoft.com/kb/2522454 the following command be issued before running the installation
of Lync
%systemroot%system32dism.exe /online /add-package
/packagepath:%windir%servicingPackagesMicrosoft-Windows-Media-Format-
Package~31bf3856ad364e35~amd64~~6.1.7601.17514.mum /ignorecheck
6. You can install IIS 7.0 or 7.5 from Server Manager or by using the command line. Run the following command
from the command line to install the IIS 7.0 or 7.5 role services:
ServerManagerCmd.exe -Install Web-Server Web-Scripting-Tools Web-Windows-Auth
Web-Asp-Net Web-Log-Libraries Web-Http-Tracing Web-Stat-Compression Web-Default-
Doc Web-ISAPI-Ext Web-ISAPI-Filter Web-Http-Errors Web-Http-Logging Web-Net-Ext
Web-Client-Auth Web-Filtering Web-Mgmt-Console
7. Or, on the Windows Server 2008 R2 x64 operating system, you can use Windows PowerShell 2.0. You must
first import the ServerManager module, and then install the IIS 7.5 role and role services.
Import-Module ServerManager Add-WindowsFeature Web-Server, Web-Scripting-Tools,
Web-Windows-Auth, Web-Asp-Net, Web-Log-Libraries, Web-Http-Tracing, Web-Stat-
Compression, Web-Default-Doc, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Http-Errors,
Web-Http-Logging, Web-Net-Ext, Web-Client-Auth, Web-Filtering, Web-Mgmt-Console
Role Heading (IIS Requirements) Role Service
Common HTTP Features installed Static Content
Common HTTP Features installed Default Document
Common HTTP Features installed HTTP Errors
Common HTTP Features installed HTTP Redirection
Application Development ASP.NET
Application Development .NET Extensibility
Application Development Internet Server API (ISAPI) Extensions
Application Development ISAPI Filters

Role Heading (IIS Requirements) Role Service
Health and Diagnostics HTTP Logging
Health and Diagnostics Logging Tools
Health and Diagnostics Tracing
Security Windows authentication
Security Client Certificate Mapping Authentication
Security Request Filtering
Performance Static Content Compression
Management Tools IIS Management Console
Management Tools IIS Management Scripts and Tools
8. Install Active Directory Administrative Tools
9. AD, IPv6 Enabled, AD Certificate Services in Enterprise Mode, CA and CA Web Enrollment, accept all the
defaults and install the CA.
10. Features: Remote Server Administration Tools. Within that "AD DS and AD LDS Tools" needs to be installed.
.Net Framework 3.5.1 features also needs to be installed.
11. Download & Install Silverlight.
12. Install SQL Server Native Client or go for the big installation with SQL2k8 or R2 (see the supported SQL Server
document)
13. Create and verify DNS SRV and A records. Go to DNS and in the domain under the forward lookup zone, right
click and create a new host. name=admin, type in the IP. Create another called dialin, type in the same IP.
Create another called meet, put in the same IP. Now under _tcp create other new records under the domain
in the forward zone. Select srv and click on the create record record. Service=_sipinternaltls, protocol=_tcp,
0, 0, port=5061.
14. Run Lync Server 2010 Setup
 From the installation media, run Setup.exe.
 Install the Visual C++ 2008 redistributable if asked.
 Select the default installation directory and begin the installation.
15. Prepare AD (Run from the Installation Media)

 Run Schema Prep
 Run Forest Prep
 Run Domain Prep
To verify the preparation, open up ADSI Edit, and look for the "CN-RTC-SIP-Domain". All the entries regarding the
SIP server now being added. Now prepare the Domain.
16. Update Security Group Membership
 From the Standard Edition Server, open the Active Directory Users and Computers
program.
 Expand the domain yourdomain.com and select Users.
 Double-click the Administrator account and select the Member of tab.
 Add the Administrator account to the following groups:
 CSAdministrator
 RTCUniversalServerAdmins
 Close the Active Directory Users and Computers program.
17. Now from the installation menu, click the prepare first standard edition server. Finish the installation.
18. Create a Topology using the Planning Tool: Install the topology builder. Run it from the start menu. Click
New, save the xml file. Primary SIP Domain is your domain name. Put something without any space for the
Default First Site Name, and description. Put in the Location Info. Tick the check mark where it says "Open
the New Front End Wizard when this wizard closes". The new front end pool wizard appears.
FQDN=machinename.domainname, Choose standard edition server. Turn on the checkbox for Conferencing,
which includes audio, video, and application sharing. Collocate A/V Conferencing Service should be selected
and greyed out. Uncheck all three for the association of server roles with the front end pool. Create a
sharename and give everyone permissions to full controll. Put the sharename in the file share field. Finish
the process by accepting the base external URL. You should be presented with the Phone access URL as well
as the Meeting URL. Right click from the left pane on the lync server root, edit properties, type
"https://admin.domainname", choose the central management server-should be available. Click ok and get
out of the properties. Publish the topology by right clicking your primary lync server. Click Next, the Central
Management store should be highlighted, click next the creation of central management store should start.
Scroll down to see if the topology succeeded. Finish the process.
19. Go back to the installer, and click on the install or update Lync Server System. Install and run the local config
store. Accept the defaults and run. Setup or remove Lync server components, click next. Request, install or
assign certificates. Select all certificates and click on the request. Click next and send the request
immediately to an online...click next, select the CA and click next. Click next twice and type in a friendly
name. Mark the certificate as exportable. Click on next loads of times, type in the domain and SIP location
settings, finish the process, view the certificate if you want to c it.
20. Run the start services.
21. Create couple of users in the AD users and computers.
22. Go to the admin site of the SIP server as: https://admin......, type in the credentials. the admin panel should
come up. Add the newly created users.
23. Install the client into two machines. Login and chat!!!

Microsoft Lync Server 2010 Installation

More Related Content

What's hot

What's hot (19)

Viewers also liked

Viewers also liked (11)

Similar to Microsoft Lync Server 2010 Installation

Similar to Microsoft Lync Server 2010 Installation (20)

More from Shahab Al Yamin Chawdhury

More from Shahab Al Yamin Chawdhury (7)

Recently uploaded

Recently uploaded (20)

Microsoft Lync Server 2010 Installation