Document Summary and the History of Perpetual Motion
Every single Faraday Generator coil since 1834 has been and is currently performing Negative Work at infinite efficiency with created Electromagnetic Field Energy during electricity generation and its physical Kinetic Energy reduction or Electromagnetic Resistance of the changing magnetic field which is initially inducing Electric Current in the generator coil according to Faraday's Law of Induction.
The Work-Energy Principle confirms mathematically that the magnitude of the changing magnetic field's Kinetic Energy reduction is equal to the magnitude of Negative Work performed at infinite efficiency, which is equal to the magnitude of Energy (Electromagnetic Field Energy which is created according to Oersted's Law of Creation of Energy of 1820). Created Electromagnetic Field Energy is required in order to perform the Negative Work – because Work cannot be performed in the absence of Energy.
In 2007 Thane Heins of Almonte Ontario, Canada discovered that unlimited amounts of Positive Electromechanical Work could be performed at infinite efficiency with created and TIME DELAYED Electromagnetic Field Energy.
Every single ReGenX Generator coil since 2007 has been and is currently performing Positive Work at infinite efficiency with created Electromagnetic Field Energy during electricity generation and during its physical Kinetic Energy increase or Electromagnetic Assistance of the changing magnetic field which is initially inducing Electric Current in the generator coil according to Heins' Law of Induction.
Faraday Electric Generators all harness internally Created Electromagnetic Field Energy in order to perform Negative Work (system Kinetic Energy reduction) at infinite efficiency and ReGenX Electric Generators harness internally created and Time Delayed Electromagnetic Field Energy in order to perform Positive Work (system Kinetic Energy increase) at infinite efficiency.
Both Faraday Generators and ReGenX Generators operate as Perpetual Motion Machines of the First Kind because they both have the ability to perform both Negative or Positive Work indefinitely and at infinite efficiency without requiring any External Energy input. The unlimited Energy required to perform either the Negative or Positive Work is created at the Sub-Atomic Quantum Electron level inside the generators' Current Bearing Wires according to the Law of Creation of Energy.
Hans Christian Oersted discovered the Law of Creation of Energy in 1820 when he demonstrated the world's first Perpetual Motion Machine of the First Kind at the University of Copenhagen when he also simultaneously violated Newton's 1st, 2nd and 3rd Laws of Motion.
Michael Faraday built and demonstrated the world's second Perpetual Motion Machine of the First Kind in 1822 when he demonstrated his Electric Motor invention which harnessed created Electromagnetic Field Energy in order to perform Positive Electromechanical Work at infinite efficienc
Report
Share
Report
Share
1 of 14
Download to read offline
More Related Content
Similar to PART 1 The New Natural Principles of Electromagnetism and Electromagnetic Field Energy Creation.pdf
New Laws of Physics as a Result of Potential Difference inc. ResearchThane Heins
1) A researcher discovered that inducing electromagnetic fields in a generator coil above a critical frequency could violate Lenz's Law and allow the generator to operate at infinite efficiency.
2) Experiments with prototypes at a university lab concluded they operated at infinite efficiency, validated by professors.
3) This challenged existing laws of physics like conservation of energy, requiring new laws to be developed around electromagnetic field energy creation and how it allows positive work.
Electric regenerative braking systems convert kinetic energy from slowing vehicles into electrical energy stored in batteries. Potential Differences claims to have developed "regenerative acceleration" technology, which uses coils to store potential energy and release it in a way that accelerates rather than decelerates motion, violating laws of physics. This white paper evaluates the empirical evidence and arguments for regenerative acceleration technology, identifies weaknesses, and recommends further testing to verify claims and support commercialization.
IEEE DRAFT 7 - Advancing the Fundimental Understanding of Electric Generator ...Thane Heins
This document discusses including the work-energy principle in Lenz's law of induction to mathematically prove that electric generators cannot violate conservation of energy. It explains that generators perform negative work through armature reaction/counter electromagnetic torque, requiring an energy source. This proves that energy must be created to power negative work. When this created energy is delayed, the generator's efficiency can become infinite by using negative work energy for positive work.
How Oersted Invented the World's 1st Induction Heater in 1820Thane Heins
The History of Oersted's Discovery of Ohm's Law, Joule Heating, the 1st Law of Thermodynamics, the Work-Energy Principle and the Law of Creation of Energy
The document provides an introduction to thermodynamics, discussing its key concepts and laws. It then gives a brief history of thermodynamics from before 1800 to 1948, highlighting contributions from scientists like Otto von Guericke, Robert Boyle, Thomas Savery. The document concludes with some applications of thermodynamics like heat engines, heat pumps and refrigerators.
Thermodynamics deals with heat, work, temperature and their relation to energy. It applies concepts like the four laws of thermodynamics and statistical mechanics. Some key historical figures include Otto von Guericke, Robert Boyle, Thomas Savery, Joseph Black and Rudolf Clausius. Thermodynamics has many applications including heat engines, which transform heat into work, and heat pumps/refrigerators which transfer heat from low to high temperatures.
NEW AREAS OF PHYSICS INQUIRY WITH REGARDS TO THE SCIENTIFIC DISCOVERIES MADE DURING THE DEVELOPMENT OF THE US Patented ReGenX GENERATOR AND
BI-TOROID TRANSFORMER INVENTIONS
Preface Overview
In 2007 it was discovered that the negative effects associated with Lenz's Law could actually be reversed in electric generator performance and a positive effect could be produced in its place.
Several new scientific revelations have followed as a result of this discovery.
The 1st revelation was that, the “equal and opposite reaction” as dictated by Newton's Third Law in Faraday's Law of Induction via Lenz's Law could now be replaced with an “equal and complementary reaction” via a new law of physics called Heins' Law.
The 2nd revelation revealed that, Lenz's Law had been successfully circumvented and Faraday's Law of Induction now required re-evaluation and rewriting to include this new discovery and a positive sign rather than a negative sign in Faraday's Law.
The 3rd revelation was that, Newton's Third Law and the Law of Conservation of Energy were also circumvented and the wisdom of including Electricity and Magnetism under the umbrella of Newtonian Mechanics by our early scientists was put into question.
The 4th revelation was that, an electric generator which accelerated itself under load instead of decelerating itself, which required no mechanical input power increase while generating electricity was not converting mechanical input power to electrical output power and was operating at infinite efficiency.
The 5th revelation was that, an electric generator which could perform Positive Work, increasing its own Kinetic Energy while simultaneously supplying electric power to a load meant that induced magnetic fields are a form of energy which performs work and that this energy is created.
The 6th revelation was that, electric motors which currently purport to convert electrical input power to mechanical output power can now be viewed with this new perspective, as basically just induction heaters which only have the ability to convert input electric energy to heat output energy - when induced magnetic fields are correctly identified as a form of energy and this energy source actually performs the mechanical work in an all electric motors at infinite efficiency according to the Power Rule and the Work-Energy Principle.
New Areas of Scientific Inquiry with Regards to ReGenX Generator and Bi-Toroi...Thane Heins
Thane C. Heins
President and CEO
Potential +/- Difference inc.
Pioneering Electric Vehicle Regenerative Acceleration and Charging Ahead...
“You never change things by fighting the existing reality.
To change something, build a new model that makes the existing model obsolete.”
― Buckminster Fuller
How to Eliminate 100% of ALL the C02 and Air Pollution Produced During ALL Gl...Thane Heins
How to Eliminate...
100% the C02 and Air Pollution Produced During Fossil-Fuel Electricity Generation,
100% of the Input Energy and
100% of the Financial Input Energy Cost
Required in ALL Electricity Generation
Until the End of Time
WHAT IF Generator Armature Reaction did not exist?
THEN...
NO Mechanical Input Energy would ever be required when generating electricity,
NO C02 and NO Air Pollution would ever be produced during fossil-fuel electricity generation and NO Financial Input Energy Cost would ever be incurred during the electricity generation phase.
AND the term Global Warming would NOT exist.
On February 28th, 2008 MIT confirmed that Generator Armature Reaction could be REVERSED and COMPLETELY ELIMINATED from the electricity generation equation meaning:
NO Mechanical Input Energy is ever required when generating
any amount of electricity forever, and
NO C02 and NO Air Pollution will ever be produced,
during Fossil-Fuel electricity generation,
and NO Financial Input Energy Cost will ever be incurred during
the electricity generation phase.
AND the term Global Warming is NO LONGER relevant.
The End.
“Every new beginning comes from some other beginning's end.”
~ Seneca
HOW CHINA AND RUSSIA CAN IMMEDIATELY INCORPORATE INFINITE EFFICIENCY ELECTRICITY GENERATION IN THEIR COUNTRIES - 中国和俄罗斯如何在各自国家立即实现无限高效发电 - КАК КИТАЙ И РОССИЯ МОГУТ НЕМЕДЛЕННО ВНЕСТИ БЕСКОНЕЧНУЮ ЭФФЕКТИВНОСТЬ ПРОИЗВОДСТВА ЭЛЕКТРОЭНЕРГИИ В СВОИХ СТРАНАХ
Thane C. Heins
President and CEO, Potential +/- Difference Inc. Clean-tech Research & Development
Ottawa, Canada
thaneh@potentialdifference.ca
613.293.1131
How to Eliminate 100% of ALL the C02 and Air Pollution Produced During ALL Gl...Thane Heins
How to Eliminate...
100% the C02 and Air Pollution Produced,
100% of the Input Energy Required &
100% of the Financial Input Energy Cost
in ALL Electricity Generation
Until the End of Time...
Every Electric Generator in use in the world today requires
Input Energy because of ONLY ONE reason and that reason is
Generator Armature Reaction
IF Generator Armature Reaction was Eliminated from the
Electricity Generation Equation
Global Warming would be Eliminated as well...
FYI Generator Armature Reaction
was ELIMINATED in 2007
WHAT IF Generator Armature Reaction did not exist?
THEN...
NO Mechanical Input Energy would ever be required when generating electricity,
NO C02 and NO Air Pollution would ever be produced during fossil-fuel electricity generation and NO Financial Input Energy Cost would ever be incurred during the electricity generation phase.
AND the term Global Warming would NOT exist.
On February 28th, 2008 MIT confirmed that Generator Armature Reaction could be REVERSED and COMPLETELY ELIMINATED from the electricity generation equation meaning:
NO Mechanical Input Energy is ever required when generating
any amount of electricity forever, and
NO C02 and NO Air Pollution will ever be produced,
during Fossil-Fuel electricity generation,
and NO Financial Input Energy Cost will ever be incurred during
the electricity generation phase.
AND the term Global Warming is NO LONGER relevant.
The End
Abstract—this paper involves the inclusion of the work-energy principle into Lenz's law of induction. This provides us with a completely new perspective with regards to electric generator performance, the role of work and energy and the source of the energy required to perform work in electric generators.
This process has important implications with regards to advancing our understanding of the subjects of electric generator performance, electricity and magnetism, the nature of electromagnetically induced magnetic fields, energy (specifically the conservation of energy), Newtonian mechanics, and the physical structure of the universe.
Sir Issac Newton formulated the subject of Newtonian Dynamics in terms of the 3 laws of motion. Lenz's law has been used by physicists since 1822 to explain how Newton's 3rd law is expressed in electricity generation and specifically with regards to electric generator performance. More recently Lenz's and Newton's 3rd law are employed colloquially in the explanation of electric vehicle regenerative braking – whereby an electric vehicle's kinetic energy is reduced when it is converted to electrical energy and stored in an electric vehicle's battery.
We can state Newton's 3rd law effectively, as follows: Law III: to every action there is always an equal and opposed reaction; a force (F) acting on a body of mass (M) will be accompanied somewhere by an equal and opposite reactive force (−F). [1] Newton's 2nd law states that the acceleration of an object is proportional to the force acting on it, and inversely proportional to its mass. This law can be used to help demonstrate the law of conservation of energy, which states that energy cannot be created or destroyed in an isolated system, that the total energy of an isolated system remains constant over time.
In an isolated system, neither matter nor energy transfer between a system and its surroundings are allowed. The current widely accepted understanding of our universe is that it is an isolated system, because it contains everything by definition, and thus there can be no exchange of energy with anything. If there could be, it would already be counted within the universe. [2] Within our known “isolated” universe and within all the laws of physics with which we use to describe it, the overriding principle states that, no creation of energy and no destruction of energy is allowed.
The work-energy principle's inclusion into Lenz's law of induction provides us with a very important contribution to the continued expansion of our understanding of the relationship between work and energy and the physical structure of our universe.
Thane C. Heins
President and CEO, Potential +/- Difference Inc.
Email 1: thaneh@potentialdifference.ca
Cell: 613.898.1131
"Nothing is too wonderful to be true"
~ Michael Faraday
"Physics isn't the most important thing. Love is."
~ Richard P. Feynman
Thane C. Heins
President and CEO, Potential +/- Difference Inc.
Email 1: thaneh@potentialdifference.ca
Cell: 613.898.1131
Potential +/- Difference Inc. - Pioneering Electric Vehicle Regenerative Acceleration Technology & Charging Ahead...
"Nothing is too wonderful to be true"
~ Michael Faraday
"Physics isn't the most important thing. Love is."
~ Richard P. Feynman
Advancing the Fundamental Understanding of Electric Generator Performance, Electricity and Magnetism,
Newtonian Mechanics, Energy, and the Physical Nature of the Universe with the Inclusion of the Work-Energy Principle into
Lenz's Law of Induction
Thane C. Heins Chairman Co-Founder and CTO, Potential Difference Inc.
Abstract—this paper involves the inclusion of the work-energy principle into Lenz's law of induction. This provides us with a completely new perspective with regards to electric generator performance, the role of work and energy and the source of the energy required to perform work in electric generators.
This process has important implications with regards to advancing our understanding of the subjects of electric generator performance, electricity and magnetism, the nature of electromagnetically induced magnetic fields, energy (specifically the conservation of energy), Newtonian mechanics, and the physical structure of the universe.
Sir Issac Newton formulated the subject of Newtonian Dynamics in terms of the 3 laws of motion. Lenz's law has been used by physicists since 1822 to explain how Newton's 3rd law is expressed in electricity generation and specifically with regards to electric generator performance. More recently Lenz's and Newton's 3rd law are employed colloquially in the explanation of electric vehicle regenerative braking – whereby an electric vehicle's kinetic energy is reduced when it is converted to electrical energy and stored in an electric vehicle's battery.
We can state Newton's 3rd law effectively, as follows: Law III: to every action there is always an equal and opposed reaction; a force (F) acting on a body of mass (M) will be accompanied somewhere by an equal and opposite reactive force (−F). [1] Newton's 2nd law states that the acceleration of an object is proportional to the force acting on it, and inversely proportional to its mass. This law can be used to help demonstrate the law of conservation of energy, which states that energy cannot be created or destroyed in an isolated system, that the total energy of an isolated system remains constant over time.
In an isolated system, neither matter nor energy transfer between a system and its surroundings are allowed. The current widely accepted understanding of our universe is that it is an isolated system, because it contains everything by definition, and thus there can be no exchange of energy with anything. If there could be, it would already be counted within the universe. [2]
Within our known “isolated” universe and within all the laws of physics with which we use to describe it, the overriding principle states that, no creation of energy and no destruction of energy is allowed. The work-energy principle's inclusion into Lenz's law of induction provides us with a very important contribution to the continued expansion of our understanding of the relationship between work and energy and the physical structure of our universe.
1. Energy exists in several forms such as kinetic, potential, thermal, electrical, and can be measured in joules.
2. The law of conservation of energy states that the total energy of an isolated system remains constant, though it may change forms, such as kinetic energy turning to heat.
3. There are various uses of energy including mechanical work, heating, cooling, transportation, industrial processes, and powering homes and businesses.
This document outlines the syllabus for ENVS 321: Nature of Science & Science of Going Green at Peninsula College. It covers various scientific laws and concepts related to physics, thermodynamics, and energy, including Newton's laws of motion, the laws of thermodynamics, forms of energy, heat transfer, and photosynthesis. The course is taught by Perry Spring and Brian Hauge during the spring 2011 semester.
Subject: IEEE SPECTRUM MAGAZINE, OXFORD UNIVERSITY, NATIONAL RESEARCH COUNCIL...Thane Heins
The document is an email from Thane Heins, CEO of Potential Difference Inc., introducing two new electric vehicle charging innovations and an electric power generation innovation patented by his company. He invites IEEE Spectrum magazine and several universities and professors to a live technology demonstration. The innovations include the ReGen-X Quantum Motor, which can produce mechanical output and accelerate without external electric input energy, and the ReGenX Generator, which can generate electricity without mechanical input energy. Video demonstrations and supporting articles about the innovations are provided.
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...Thane Heins
In a breakthrough that paves the way for unlimited carbon-free energy, Massachusetts Institute of Technology (MIT) professor Dr. Markus Zahn successfully validates 2 Perpetual Motion Machines of the First Kind.
On January 28th 2008 Dr. Zahn tested and confirmed the operation of a new electric generator innovation developed by Canadian Clean-tech R&D company Potential Difference inc. which generates electricity at infinite efficiency while also simultaneously performing unlimited amounts of Electro-Mechanical Work (electric motor operation) at infinite efficiency as well.
In a key step toward providing the world with unlimited clean power Dr. Zahn also confirms the New First Law of Thermodynamics and the Law of Creation of Energy which explains how unlimited amounts of clean energy is constantly being created at the Sub-Atomic Quantum Electron level vial Electron Fission and Election Fusion in every current bearing wire and how this unlimited energy recourse can now be used to power the world forever.
Overnight, it reduces the cost per Watt of electricity generation to zero said Thane Heins, inventor and US patent holder for the ReGenX Generator innovation. "Now the clean energy transition has a chance of being economically viable and financially sustainable without compromising or excluding any of our existing energy infrastructures."
At the heart of the breakthrough is a new electric generator coil design which completely eliminates the need for input energy in all electricity generation and all electric motor operation by reversing and eliminating the negative effects associated with Generator Armature Reaction which is the sole contributor of Greenhouse Gas Emissions and Nuclear Waste during electricity generation.
Dr. Zahn's confirmation of the ReGenX Generator's infinite efficiency electricity generation capability along with its infinite efficiency electric motor operation now pave the way for a rewriting of 337 years of incomplete physics and a new energy future for humanity which no longer includes Global Warming.
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...Thane Heins
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV Infinite Efficiency Electromagnetic Energy Propulsion Systems) pave the way for Unlimited Carbon-Free Energy and Carbon-Free Mobility
March 8, 2024 9:11 AM
Anantha P. Chandrakasan Dean MIT School of Engineering, MIT’s Chief Innovation and Strategy Officer, Vannevar Bush Professor of Electrical Engineering and Computer Science.
<engineering@mit.edu>; Shannon Brescher Shea Social Media Manager, Senior Writer/Editor Office of Science’s Office of Communications and Public Affairs shannon.shea@science.doe.gov ;
GOOGLE CEO sundar@google.com, GOOGLE VP Dr. Vint Cerf <vint@google.com >;
Peter Norvig Director of Research, GOOGLE Inc <pnorvig@google.com>; Dinesh Sanekommu, GOOGLE Chemtrails Research Team <dineshsane@google.com >,Nikolay Kudryavtsev, President Moscow Institute of Physics and Technology (National Research University) <rector@mipt.ru >scott <scott@solarnetone.org >; ANN DUFFY CSO and Board Advisor for Potential +/- Difference Inc. <ann@annduffygroup.com >; Dr. Leslie Virany, PhD Physics CUNY Infinite Efficiency ReGenX Generator, ReGen-X Quantum Motor and Bi-Toroid Transformer Patent Agent <lvirany@yahoo.com >; Dr Stephen Scribner, PhD Queens University, Director Intellectual Property Patent Agent <stephen.scribner@queensu.ca >; Dr. Jinfang Liu, COO & President, Electron Energy Corporation <liu@electronenergy.com >; Mike Jenkinson SIEMENS Product Lifecycle Management North American Business Development" <mike.jenkinson@siemens.com >Tyler Hamilton Senior Manager of Partnerships, Cleantech Venture Services <thamilton@marsdd.com, Jmecklin@thebulletin.org marc.shapiro@breakthroughenergy.org
Similar to PART 1 The New Natural Principles of Electromagnetism and Electromagnetic Field Energy Creation.pdf (20)
CANADA Clean-Tech Innovation Potential Difference Inc. ReGenX Generator Innov...Thane Heins
Potential Difference Inc. ReGenX Generator Innovation AI-enhanced Summary
Thane Heins developed an electric generator innovation to eliminate Generator Armature Reaction, which is responsible for 100% of pollution and human mortality from electricity generation that requires mechanical input energy. His discovery in 2007 showed that Generator Armature Reaction could be completely reversed and eliminated, allowing electricity to be generated at infinite efficiency with zero mechanical input energy, pollution or input energy cost. This reversal also enables a new EV propulsion system called electric vehicle regenerative acceleration where the Kinetic Energy of the EV is increased during battery recharging. The Energy Source powering this Positive Electromechanical Work (performed at infinite efficiency) is constantly created at the Sub-Atomic Electron level, matching the unknown source that powered the Negative Electromechanical Work (performed at infinite efficiency) of conventional Faraday generators. This new energy source provides a sustainable compliment to fossil fuels by removing their negative effects and enabling a gradual transition to clean energy.
THE HISTORY OF OERSTED'S LAW OF CREATION OF ENERGY 1820-2024.pdfThane Heins
Oersted's Law of Creation of Energy of 1820
Electromagnetic Field Energy is created at the Sub-Atomic Quantum Electron level in every Current Bearing Wire via Electron Fission and Electron Fusion when an Electromotive Force (Voltage) is applied to or induced in a Current Bearing Wire in a Closed Circuit.
Electrons are forced out of their Valence orbits via Electron Fission and they cascade within the Wire as Electric Current.
When the unstable Electrons return back down to their Valence Orbits via Electron Fusion they create and emit Photons which create and constitute the Electromagnetic Field (Photon) Energy around the Current Bearing Wire.
A Photon is an elementary particle that is a quantum of the Electromagnetic Field, and is the force carrier for Electromagnetic Force.
This internally Sub-Atomically created Electromagnetic Field Photon Energy is the Internally Created Energy Source which is required to perform Negative Work at infinite efficiency in every Faraday Generator since 1834 according to the First Law of Thermodynamics and the Positive Work at infinite efficiency in every ReGenX Generator and ReGen-X Quantum Motor since 2007 according to the New First Law of Thermodynamics.
AI Published Version Summary
of the Law of Creation of Energy & New First Law of Thermodynamics
100% Pollution Free Electricity Generation, Infinite Efficiency Electric and ICE Mobility
Thane Heins developed a technology to eliminate generator armature reaction,
which is responsible for 100% of pollution from electricity generation that requires mechanical input energy. His discovery in 2007 showed that armature reaction could be reversed, allowing electricity to be generated at infinite efficiency with zero mechanical input energy, zero input energy cost or pollution. This reversal also enables electric vehicle regenerative acceleration and unlimited EV driving range. The energy source powering this positive work at infinite efficiency is constantly being created at the sub-atomic electron level, matching the previously unknown energy source that powered the negative work of conventional electric generators since 1834. This new created energy source provides a sustainable compliment to fossil fuels by removing their negative effects and enabling a more gradual and financially sustainable transition to clean energy.
World Electric Vehicle Journal RE Elon Musk, Tesla BYD & NIO Re-Introduction ...Thane Heins
World Electric Vehicle Journal
Elon Musk, Tesla, BYD & NIO Introduction to the
Electric Vehicle Regenerative Acceleration Innovation
the New First Law of Thermodynamics and
the Law of Creation of Energy
and Zero Cost Global IP Licensing
Elon Musk Tesla CEO
Stella Li, Co-CEO of RIDE & CEO of BYD Americas
Bin Li, NIO Founder, Chairman and Chief Executive Officer
Kimbal Musk Owner, The Kitchen Restaurant Group
JB Straubel, Founder and Chief Executive Officer Redwood Materials Inc.
Joe Gebbia Airbnb Co-founder and Chairman
Ira Ehrenpreis, Founder & Managing Partner, DBL Partners
James Murdoch Founder and CEO Lupa Systems
Cc
Sundar Pichai GOOGLE CEO
Dr. Vint Cerf GOOGLE VP
Peter Norvig Director of Research, GOOGLE Inc.
Mike Jenkinson SIEMENS Product Lifecycle Management North American Business Development
Hello Elon, Ms. Li, Mr. Li, Kimbal, JB, Joe, Ira and James,
I am following up with you all today to re-introduce the US patented Electric Vehicle Regenerative Acceleration innovation which is currently being offered to all EV and ICE OEMs globally at zero cost in the hope that this will help save of them from bankruptcy or further stock devaluation.
Potential Difference inc. Patent Portfolio.pdfThane Heins
Thane C. Heins
Potencial de CEO +/- Diferencia Inc. I+D en tecnologías limpias
Ottawa, Canadá
613.293.1131
thaneh@potencialdiferencia.ca
THE LAW OF CREATION OF ENERGY CHANNEL:
https://www.youtube.com/@ThaneHeins1
DRAFT - PIERRE POILIEVERE and NRC MITCH DAVIES 2024 HOUSE OF COMMONS INTRODUC...Thane Heins
Thankfully this 2024 report has been provided by the new National Research Council of Canada's President Mitch Davies.
The 2024 NRC report confirms once again that:
1. Energy is no longer a finite commodity but rather is infinite and can and is being created at the Sub-Atomic Quantum Electron level via Electron Fission and Electron Fusion in every current bearing wire.
2. This created Electromagnetic Field Energy which has been performing all the Negative Work in every Faraday Generator since 1834 and is responsible for Climate Change can now be eliminated forever along with the Climate Change threat.
3. All electricity on Earth can now be generated globally while requiring zero Mechanical Input Power and zero Prime Mover Input Energy while producing zero C02, zero air pollution and zero Nuclear waste.
4. Because Canadian invented ReGenX Generators do not require any Financial Input Energy Cost when generating and magnitude of electricity they literally pay for themselves with reduced operating and environmental costs.
#1 (zzzzz) 4 of 7 PHILIPS - A BiTT of explanation_flux_details 1.pdfThane Heins
This document summarizes the results of an AC flux tuning simulation for a laminated steel transformer. It finds that the highest coefficient of performance (COP) occurs at a primary to secondary current phase difference of 270 degrees with a primary current of 1.075 Amps. At this operating point, the secondary voltage and current are in phase, representing a purely resistive load. The document analyzes trends in COP, power factor, voltages and currents over varying operating parameters and provides explanations for why the 270 degree phase difference point delivers optimal performance.
#1 (zzzzz) 3 of 7 PHILIPS BiTT basic principle_V4.pdfThane Heins
This document provides an explanation of the principles behind a device called a BiTT (Bit of Transformer Technology). It summarizes that the BiTT uses the primary coil to saturate the primary core, making it high reluctance, while the secondary cores remain unsaturated and low reluctance. This causes most of the secondary flux to travel through the low reluctance secondary cores, while a small amount travels through the high reluctance primary core. It also discusses coupling coefficients between the coils, flux tuning to improve power factor, and how consumed and delivered power works in the BiTT.
#1 (zzz) Patents by Inventor Thane C.pdfThane Heins
Thane C. Heins has filed several patent applications and been granted patents for various inventions related to improving electrical generator and transformer efficiency. These inventions include a generator coil that creates a positive accelerative reaction, a bi-toroidal topology transformer with different magnetic fluxes in the primary and secondary coils producing virtually no load current increase, and an improved coil for generators that delays current flow until top dead center.
US AIR FORCE, NASA, RUSSIAN ACADEMY OF SCIENCE LETTERS.pdfThane Heins
- Mike Simpson from Rocky Mountain Institute thanks Thane Heins for additional details on his regenerative acceleration technology and says their physics experts find it very interesting. They want to understand the commercial cost implications.
- Omar Mendoza from the US Air Force Research Laboratory agrees to travel to see a demonstration of the technology and says their approach is to advance it and find applications, rather than trying to convince professors.
- Stan Townsend from the University of Toronto advises Thane to describe measurements and results without trying to explain the physics or reconcile it with energy conservation, and to avoid responding to critics.
The Nature of Sub-Atomic Quantum Photon Energy Creation around a Current Carr...Thane Heins
1) The document explores the nature of electromagnetic photon energy created around current-carrying wires and how this energy can perform work.
2) It was discovered in 2007 that electromagnetic field energy can perform positive work in electric generators and motors to increase their kinetic energy without an external energy source.
3) This positive work is made possible by delaying the flow of electrons along current-carrying wires, which also delays the created electromagnetic field energy in the time domain.
Electrons undergoing fission and fusion when forced through a current-bearing wire create unlimited electromagnetic field energy at the sub-atomic level. This created energy has been powering generators and motors since 1831, violating established laws of motion and thermodynamics by enabling infinite positive work to be harnessed from the process.
Thane Edited - ReGenX India Meeting Notes November 29.2019.pdfThane Heins
The document summarizes notes from a November 2019 meeting between Thane Heins, Corry, and Dr. Alam regarding patenting and commercializing the ReGenX technology. Key discussion points included filing patents for the technology in India and Canada by the end of 2019, establishing Thane Heins as the inventor and brand of the technology, and developing a commercialization strategy to launch in India and other markets in 2020. Dr. Alam provided input on communication strategies and outlined drafting an IEEE paper explaining the new physics challenges. Plans were discussed to set up a sister company in India and offer Dr. Alam ownership and a board seat in the new companies. Securing funding for PDi's market penetration plan was highlighted as
THANE C. HEINS Potential Difference inc. Innovation One Page Summary 911 – 20...Thane Heins
Thane Heins developed a technology to eliminate generator armature reaction, which is responsible for 100% of pollution from electricity generation. By 2007, he discovered armature reaction could be not only eliminated but reversed. This means electricity can be generated with zero mechanical input energy or costs while producing zero pollution. Reversing armature reaction also allows electric vehicles to be accelerated while recharging batteries. The energy source powering this reaction at the sub-atomic electron level has been misunderstood for 200 years and provides an unlimited compliment to fossil fuels that removes their negative effects during the transition to clean energy.
Sustainable Development Technology Canada Document.pdfThane Heins
The document describes a new technology called the ReGenX Generator that aims to reduce generator armature reaction. This reaction currently accounts for 80% of the cost of generating electricity. The technology introduces a load current delay that can reverse this reaction. In electric vehicles, it reverses regenerative braking and allows batteries to charge while accelerating. This could reduce costs of electric power generation by over 80% and increase electric vehicle range. The technology has a technology readiness level of 6 and is ready for commercialization through licensing to manufacturers. The target market is electric motors, generators, and transformers globally, with a potential multi-trillion dollar total addressable market.
STAGE 1 Siemens - Uwaterloo Generator and Transformer Research and Developmen...Thane Heins
A research and development consortium is being established at the University of Waterloo to integrate a generator's load current delay technology into electric machine design software. The consortium will consist of two stages: an evaluation stage to empirically compare the performance of a conventional generator to a ReGenX generator below and above a critical frequency, and a technology development stage to design ReGenX generators and motors. The evaluation will analyze armature reaction, efficiency, load current waves, and an explanation of how the ReGenX generator reverses armature reaction above a critical frequency.
Prototype Implementation of Non-Volatile Memory Support for RISC-V Keystone E...LenaYu2
Handling confidential information has become an increasingly important concern among many areas of society. However, current computing environments have been still vulnerable to various threats, and we should think they are untrusted.
Trusted Execution Environments (TEEs) have attracted attention because they can execute a program in a trusted environment constructed on an untrusted platform.
Particularly, the RISC-V Keystone is one of the interesting TEEs since it is a flexibly customizable and fully open-source platform. On the other hand, as same as other TEEs, it must also delegate I/O processing, such as file accesses, to a host OS, resulting in the expensive overhead. For this problem, we thought utilizing byte-addressable non-volatile memory (NVM) modules is a useful solution to handle persistent data objects for TEEs.
In this paper, we introduce a prototype implementation of NVM support for the Keystone. Additionally, we evaluate it on the Freedom U500 built on a VC707 FPGA dev kit.
https://ken.ieice.org/ken/paper/20210720TC4K/
The extremotolerant desert moss Syntrichia caninervis is a promising pioneer ...Sérgio Sacani
Many plans to establish human settlements on other planets focus on
adapting crops to growth in controlled environments. However, these settlements will also require pioneer plants that can grow in the soils and
harsh conditions found in extraterrestrial environments, such as those
on Mars. Here, we report the extraordinary environmental resilience of Syntrichia caninervis, a desert moss that thrives in various extreme environments. S. caninervis has remarkable desiccation tolerance; even after
losing >98% of its cellular water content, it can recover photosynthetic
and physiological activities within seconds after rehydration. Intact plants
can tolerate ultra-low temperatures and regenerate even after being stored
in a freezer at 80C for 5 years or in liquid nitrogen for 1 month.
S. caninervis also has super-resistance to gamma irradiation and can survive and maintain vitality in simulated Mars conditions; i.e., when simultaneously exposed to an anoxic atmosphere, extreme desiccation, low temperatures, and intense UV radiation. Our study shows that S. caninervis is
among the most stress tolerant organisms. This work provides fundamental insights into the multi-stress tolerance of the desert moss
S. caninervis, a promising candidate pioneer plant for colonizing extraterrestrial environments, laying the foundation for building biologically sustainable human habitats beyond Earth.
Ethical considerations play a crucial role in research, ensuring the protection of participants and the integrity of the study. Here are some subject-specific ethical issues that researchers need
This an presentation about electrostatic force. This topic is from class 8 Force and Pressure lesson from ncert . I think this might be helpful for you. In this presentation there are 4 content they are Introduction, types, examples and demonstration. The demonstration should be done by yourself
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
just download it to see!
CULEX MOSQUITOES, SYSTEMATIC CLASSIFICATION, MORPHOLOGY, LIFE CYCLE , CLINICA...DhakeshworShougrakpa
showing Culex mosquitoes' systematic classification, a completed life cycle i.e. egg, larva, pupa and adult mosquitoes also known as imago, also this slide showed the morphology of culex mosquitoes including head, thorax, abdomen, wing, egg larval stage, resting position,etc. by comparing with anopheles' mosquitoes. it's also showed the transmission of wuchereria bancrofti transmitted by vector Culex quinquefasciatus. Host: W. bancrofti completes its life cycle in
two hosts.
1. Definitive host: Man
2. Intermediate host: Mosquito named
Culex quinquefasciatus is the principle
vector worldwide. Rarely Anopheles
(rural Africa) or Aedes (Pacific Island)
can serve as a vector.
Infective form: Third stage filariform larvae
are the infective form found in the proboscis
of the mosquito.
Mode of transmission: L3
filariform larvae get
deposited in skin by the insect bite. Residents living in the endemic areas are exposed to
about 50–300 L3
larvae every year.Human cycle
z Develop into adults: Larvae penetrate
the skin, enter into lymphatic vessels and
migrate to the local lymph nodes where they
molt twice to develop into adult worms in
few months (4–6 weeks for B. malayi)
z Adults lay L1
larvae (microfilariae): Adult
worms reside in the afferent lymphatics or
cortical sinuses of the lymph nodes where
they mate and start laying the first stage
larvae (microfilariae). Male worms die after
mating where as the female worms live for
5–10 years. A gravid female can discharge
50,000 microfilariae/day
z Prepatent period: It is the time period
between the infection (entry of L3
larvae)
and diagnosis (detection of microfilariae
in blood). This is variable ranging from 80
days to 150 days
Mosquito cycle
z Transmission: When the mosquito bites
an infected man, the microfilariae are
ingested. Culex bites in night where as Aedes
bites in daytime
z Exsheathing: Microfilariae come out of the
sheath within 1–2 hours of ingestion
z Migration to thoracic muscle: L1
larvae
penetrate the stomach wall and migrate to
thoracic muscle in 6–12 hours where they
become sausage shaped (short and thick)
z Develop to infective L3
larvae: L1
larvae
molt twice to develop L2
(long and thick
form) followed by L3
(long and thin form).
The highly active L3
larvae migrate to the
labella (distal part of proboscis) of the
mosquito and serve as the infective stage
to man
z Extrinsic incubation period: Under
optimum conditions, the mosquito cycle
takes around 10–14 days
Clinical symptoms:
The clinical symptoms and signs are mainly determined by the duration of the infection. The
adult worms, which live in the lymphatic vessels, can cause severe inflammation of the
lymphatic system and acute recurrent fever. Secondary bacterial infections are a major factor in
the progression towards lymphoedema and elephantiasis, the characteristic swelling of the limbs,
genitalia and breasts.
treatment like using larvicide like fenthion can spray on water
ScieNCE grade 08 Lesson 1 and 2 NLC.pptxJoanaBanasen1
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it................
just download it..............
Cause and solution of Water hyacinth (Terror of Bengal)saloniswain225
Water hyacinth is a buoyant plant that has a clump of leaves with squishy stalks arising from the lower feathery roots and it is an invasive species came from South America
This an presentation about electrostatic force. This topic is from class 8 Force and Pressure lesson from ncert . I think this might be helpful for you. In this presentation there are 4 content they are Introduction, types, examples and demonstration. The demonstration should be done by yourself
PART 1 The New Natural Principles of Electromagnetism and Electromagnetic Field Energy Creation.pdf
1. PART 1
The New Natural Principles
of
Electromagnetism
and
Electromagnetic Field
Energy Creation
Author: Thane C. Heins
Publication Date: July 1st
2024
Publication Place: Chelsea Quebec, Canada
2. TABLE OF CONTENTS
Introduction, Document Summary and AI Published Synopsis
Document Summary and the History of Perpetual Motion
Aristotle and Galileo's Law of Inertia / Galileo's Principle
Newton's First Law of Motion for Mechanical Systems
Heins' First Law of Motion for Electromechanical Systems
Revision of Galieo's Law of Inertia for Electrodynamic Systems
Revising Aristotle's and Galieo's Law of Inertia for Electrodynamic Systems
Heins' New First Law of Motion for Electrodynamic Systems
Newton’s First Law of Motion: the Law of Inertia
Heins' New First Law of Motion for Electrodynamic Systems: the New Law of Inertia
Newton's Second Law of Motion for Mechanical Systems
Galileo's Transformation or the Addition of Velocities for Mechanical Systems
Heins' New Second Law of Motion for Electromechanical Systems
Heins' New Transformation or the New Subtraction or Addition of Velocities for
Electromechanical Systems
Revising and Rewriting Newton's Second Law,
Galileo's Transformation or the Subtraction or Addition of Velocities for Electrodynamic Systems
Perfect Examples of the Violation and Revision of Galileo's Transformation or the Subtraction of
Velocities (Newton's Second Law of Motion) for Electrodynamic Systems
Perfect Example of the Violation and Revision of Galileo's Transformation or the Addition or
Velocities (Newton's Second Law of Motion) for Electrodynamic Systems
Empirical Experimental Evidence Example 1: Heins' New Transformation or Subtraction and
Addition of Velocities and Heins' New Second Law of Motion for Electrodynamic Systems
Newton's Third Law of Motion for Mechanical Systems
Heins' New Third Law of Motion for Electromechanical Systems and the Law of Creation of
Momentum
Heins' Law of Creation of Momentum Empirical Experimental Evidence Example 2:
3. Heins' New Third Law of Motion for Electromechanical Systems
Heins' New Law of Creation of Momentum and Heins' New First Law of Thermodynamics
INTRODUCTION
The New Natural Principles of Electromagnetism and Electromagnetic Field Energy Creation represent
the most important works in the history of science to date.
The New Natural Principles of Electromagnetism and Electromagnetic Field Energy Creation mark the
epoch of a great revolution in physics, a great re-evaluation of energy and its creation and a great
revelation for human evolution.
The methods followed by Thane C. Heins now spread the light of mathematics on a field of science
which previously remained in the darkness of ignorance, conjecture, prejudice and incomplete
hypotheses since the original discovery of electromagnetism in 1820 by Hans Christian Oersed.
The New Natural Principles of Electromagnetism and Electromagnetic Field Energy Creation are the
greatest productions of the human minds that created it - which exceeds anything that has ever gone
before and they stand alone as the ultimate example of modern advances in science.
The Natural Principles of Electromagnetism and Electromagnetic Field Energy Creation form a new
mathematical foundation for the theory of Classical Mechanics, Electromagnetism and
Electromechanics.
In formulating his new physical laws of Mechanics, Electromagnetism and Electromagnetic Field
Energy Creation, Heins emphasizes the expression Hypothesis non fingo and the empirical nature of the
work including the requisite; that all hypotheses must represent quantifiably observable facts and not be
connected to any other arbitrary and untried beliefs or human prejudices which have previously
preceded them including all previous philosophers who failed to resign them as soon as the facts
refused to confirm their fallacies.
In order to reduce the risk of further public misunderstanding the author is also including Newton's
Rules of Reason for Newtonian Mechanics and Electromagnetic Philosophy which state that:
1. We are to admit no more causes of natural mechanical and electromagnetic phenomenon than such as
are both true and sufficient to explain their quantifiablility and empirically observable nature.
2. Empirical and quantifiable observations which are within the reach of repeatable experimentation,
are to be considered universal qualities.
3. Experimental philosophy requires us to look upon natural observable and quantifiable phenomenon
as being true notwithstanding any contrary imagined, inaccurate hypothesis or made up fallacies which
are not supported by the experimental results.
The New Natural Principles of Electromagnetism and Electromagnetic Field Energy Creation build
upon, expand on and rewrite; Galileo's Law of Inertia / Galileo's Principle, Newton's First Law of
Motion, Newton's Second Law of Motion, Newton's Third Law of Motion, Faraday's Law of Induction,
Lenz's Law of Induction, Joule's Work-Energy Principle, Mayer's theory of conservation of energy,
4. Mayer's First Theory of Thermodynamics and they introduce Heins' Law of Induction, the New Work-
Energy Principle for Electrodynamic Systems, the New First Law of Thermodynamics for
Electrodynamic Systems, the Law of Creation of Electromagnetic Field Energy and two new
definitions for Perpetual Motion Machines (Perpetual Motion Machines of the 4th
and 5th
kind).
Document Summary and the History of Perpetual Motion
Every single Faraday Generator coil since 1834 has been and is currently performing Negative Work at
infinite efficiency with created Electromagnetic Field Energy during electricity generation and its
physical Kinetic Energy reduction or Electromagnetic Resistance of the changing magnetic field which
is initially inducing Electric Current in the generator coil according to Faraday's Law of Induction.
The Work-Energy Principle confirms mathematically that the magnitude of the changing magnetic
field's Kinetic Energy reduction is equal to the magnitude of Negative Work performed at infinite
efficiency, which is equal to the magnitude of Energy (Electromagnetic Field Energy which is created
according to Oersted's Law of Creation of Energy of 1820). Created Electromagnetic Field Energy is
required in order to perform the Negative Work – because Work cannot be performed in the absence of
Energy.
In 2007 Thane Heins of Almonte Ontario, Canada discovered that unlimited amounts of Positive
Electromechanical Work could be performed at infinite efficiency with created and TIME DELAYED
Electromagnetic Field Energy.
Every single ReGenX Generator coil since 2007 has been and is currently performing Positive Work at
infinite efficiency with created Electromagnetic Field Energy during electricity generation and during
its physical Kinetic Energy increase or Electromagnetic Assistance of the changing magnetic field
which is initially inducing Electric Current in the generator coil according to Heins' Law of Induction.
Faraday Electric Generators all harness internally Created Electromagnetic Field Energy in order to
perform Negative Work (system Kinetic Energy reduction) at infinite efficiency and ReGenX Electric
Generators harness internally created and Time Delayed Electromagnetic Field Energy in order to
perform Positive Work (system Kinetic Energy increase) at infinite efficiency.
Both Faraday Generators and ReGenX Generators operate as Perpetual Motion Machines of the First
Kind because they both have the ability to perform both Negative or Positive Work indefinitely and at
infinite efficiency without requiring any External Energy input. The unlimited Energy required to
perform either the Negative or Positive Work is created at the Sub-Atomic Quantum Electron level
inside the generators' Current Bearing Wires according to the Law of Creation of Energy.
Hans Christian Oersted discovered the Law of Creation of Energy in 1820 when he demonstrated the
world's first Perpetual Motion Machine of the First Kind at the University of Copenhagen when he also
simultaneously violated Newton's 1st
, 2nd
and 3rd
Laws of Motion.
Michael Faraday built and demonstrated the world's second Perpetual Motion Machine of the First
Kind in 1822 when he demonstrated his Electric Motor invention which harnessed created
Electromagnetic Field Energy in order to perform Positive Electromechanical Work at infinite
efficiency.
5. Michael Faraday built and demonstrated the world's third Perpetual Motion Machine of the First Kind
in 1834 when he demonstrated his Electric Generator invention which harnessed created
Electromagnetic Field Energy in order to perform Negative Work at infinite efficiency.
Thane Heins built and demonstrated the world's forth Perpetual Motion Machine of the First Kind in
2007 when he demonstrated his Electric Generator invention which harnessed created and Time
Delayed Electromagnetic Field Energy in order to perform Positive Work indefinitely and at infinite
efficiency.
Aristotle and Galileo's Law of Inertia / Galileo's Principle
The net external forces acting on an object or system are the vector sum of all the external forces acting
upon the object or system. If the sum is zero the state of motion does not change.
Galieo's Law of Inertia states that, “the magnitude of the Externally Applied Force determines the body
or system's rate of acceleration or kinetic energy increase and also the rate of deceleration or kinetic
energy decrease.
A perfect example of Aristotle's and Galileo's Law of Inertia may be found in a fossil fuel powered
vehicle which eventually comes to a complete stop when it runs out of fuel due to the net external
resistive forces acting upon it.
Newton's First Law of Motion for Mechanical Systems
“An object at rest will remain at rest unless acted upon by an Externally Applied Force. An object in
motion will remain in motion unless acted upon by an External Opposing Force.”
Heins' First Law of Motion for Electromechanical Systems
“An object at rest will remain at rest unless acted upon by an Internally Created and Applied Force. An
object in motion will remain in motion unless acted upon by an Internally Created and Internally
Applied Opposing or Assisting Force.”
Revision of Galieo's Law of Inertia for Electrodynamic Systems
Galieo's Law of Inertia for Mechanical Systems states that, “the magnitude of the externally applied
force determines the body or system's rate of acceleration or kinetic energy increase and also the rate of
deceleration or kinetic energy decrease.
Lenz's Law of Induction revises Aristotle's and Galieo's Law of Inertia for Electrodynamic Systems
because the magnitude of the Internally Created and Applied Force determines the body or system's
rate of deceleration or kinetic energy decrease according to the Work-Energy Principle and the Law of
Creation of Energy.
Lenz's Law of Induction states that, “the electric current which is induced in a current bearing wire
according to Faraday's Law of Induction will internally create electromagnetic field energy at the sub-
atomic quantum electron level inside and externally around said current bearing wire according to the
Law of Creation of Energy. And that this created electromagnetic field energy will perform negative
work at infinite efficiency (according to the Work-Energy Principle) which will physically oppose or
6. reduce the kinetic energy (inertia) of the magnetic field which is responsible for inducing the electric
current in the current bearing wire in first place.
A perfect example of the violation and revision of Aristotle's and Galileo's Law of Inertia and Newton's
First Law of Motion may be found in an electric vehicle which has its kinetic energy reduced during
electric vehicle regenerative braking, where internally created electromagnetic field energy, inside the
generator's current bearing wires - inside the electric vehicle's generator performs negative work at
infinite efficiency on the electric vehicle, opposing its motion and reducing its kinetic energy.
Revising Aristotle's and Galieo's Law of Inertia for Electrodynamic Systems
Lenz's law of Induction, Heins' Law of Induction and Heins' First Law of Electromagnetic Motion
revise Aristotle's and Galieo's Law of Inertia for Electrodynamic Systems because the magnitude of the
internally created electromagnetic field energy and the internally applied force mathematically
determines the body or system's rate of deceleration and or acceleration / kinetic energy decrease or
increase according to the Work-Energy Principle and the Law of Creation of Energy - where the net
magnitude of electromagnetic field energy created equals the net work performed (either negative or
positive / decelerative or accelerative).
Heins' New First Law of Motion for Electrodynamic Systems
Every Faraday Generator since 1834 which is rotating at a steady state speed with a mathematically
quantifiable magnitude of kinetic energy (in Joules) can be subject to negative work which is
performed at infinite efficiency and have its kinetic energy reduced to zero Joules by internally and
instantaneously created electromagnetic field energy and an internally applied electromagnetic force
according to Lenz's Law of Induction, Faraday's Law of Induction, the Work-Energy Principle and the
Law of Creation of Energy.
Every ReGenX Generator since 2007 which is rotating at a steady state speed with a mathematically
quantifiable magnitude of kinetic energy (in Joules) can be subject to positive work which is performed
at infinite efficiency and have its kinetic energy increased by internally and time delayed created
electromagnetic field energy and an internally applied and time delayed electromagnetic force
according to the New Faraday's Law of Induction, Heins' Law of Induction, the Work-Energy Principle
and the Law of Creation of Energy.
Newton’s First Law of Motion: the Law of Inertia
Newton’s First Law states that, “if a body is at rest or moving at a constant speed in a straight line, it
will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by an
externally applied force.
Heins' New First Law of Motion for Electrodynamic Systems: the New Law of Inertia
Heins' First Law for Electrodynamic Systems states that, “if a body is at rest or moving at a constant
speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it
is acted upon by an internally created and applied force.
In the electrodynamic case of Lenz's Law of Induction, negative work is performed at infinite
efficiency with instantaneously created electromagnetic field energy.
In the electrodynamic case of Heins' Law of Induction, positive work is performed at infinite efficiency
with created and time delayed electromagnetic field energy.
7. Newton's Second Law of Motion for Mechanical Systems
Galileo's Transformation or the Addition of Velocities for Mechanical Systems
Galileo's Transformation or the Addition of Velocities aka Newton's Second Law of Motion states that,
“the rate change in the increase or decrease in momentum / inertia / kinetic energy of a body or system
is directly proportional to the amount of externally applied force which is exerted upon the object or
system.
Heins' New Second Law of Motion for Electromechanical Systems
Heins' New Transformation or the New Subtraction or Addition of Velocities for Electromechanical
Systems
Heins' Transformation or the Subtraction or Addition of Velocities aka Heins' New Second Law of
Motion for Electrodynamic Systems states that, “the rate change in the increase or decrease in
momentum / inertia / kinetic energy of a body or system is directly proportional to the amount of
internally applied force which is exerted upon the object or system.
Revising and Rewriting Newton's Second Law,
Galileo's Transformation or the Subtraction or Addition of Velocities for Electrodynamic Systems
Heins' New Transformation or the Subtraction or Addition of Velocities aka Heins' Second Law of
Motion for Electrodynamic Systems states that, “the rate change in the decrease or increase in
momentum / inertia / kinetic energy decrease or increase of a body or system is directly proportional to
the amount of internally created electromagnetic field energy and the magnitude of the internally
applied electromagnetic force which is exerted upon the object or system.
Perfect Examples of the Violation and Revision of Galileo's Transformation or the Subtraction of
Velocities (Newton's Second Law of Motion) for Electrodynamic Systems
Perfect examples of the violation and revision of Galileo's Transformation or the Subtraction of
Velocities (Newton's Second Law of Motion) is the operation of an electric vehicle during regenerative
braking where the internally created electromagnetic field energy inside the EV's generator performs
negative work via a Counter-Electromagnetic-Torque which produces a Subtraction of Velocity / EV
kinetic energy reduction which is performed at infinite efficiency, according to Faraday's Law of
Induction, Lenz's Law of Induction, the Work-Energy Principle and the Law of Creation of Energy.
Perfect Example of the Violation and Revision of Galileo's Transformation or the Addition or
Velocities (Newton's Second Law of Motion) for Electrodynamic Systems
Perfect examples of the violation and revision of Galileo's Transformation or the Addition of Velocities
(Newton's Second Law of Motion) is the operation of an electric vehicle during Regenerative
Acceleration where the internally created electromagnetic field energy inside the EV's generator
performs positive work via a Complementary-Electromagnetic-Torque which produces an Addition of
Velocity / EV kinetic energy increase which is performed at infinite efficiency, according to Faraday's
New Law of Induction, Heins' Law of Induction, the Work-Energy Principle and the Law of Creation
of Energy.
8. Empirical Experimental Evidence Example 1: Heins' New Transformation or Subtraction and
Addition of Velocities and Heins' New Second Law of Motion for Electrodynamic Systems
Where negative work / subtraction of velocity is performed at infinite efficiency with internally created
electromagnetic field energy and an instantaneously applied electromagnetic force.
And where positive work / addition of velocity is performed at infinite efficiency with internally
created and time delayed electromagnetic field energy and a time delayed electromagnetic force.
https://www.youtube.com/watch?v=3O-uFXiObBc&t=31s
Newton's Third Law of Motion for Mechanical Systems
Newton's Third Law of Motion states that, “for every action there is an equal and opposite reaction.”
Newton's Third Law follows mathematically from the Law of Conservation of Momentum which states
that, “for two or more bodies in an isolated system acting upon each other, their total momentum
remains constant unless an external force is applied. Therefore, momentum can neither be created or
destroyed.
Where an isolated system, is defined as a thermodynamic system enclosed by rigid immovable walls
through which neither mass nor energy can pass.
Heins' New Third Law of Motion for Electromechanical Systems and the Law of Creation of
Momentum
Heins' Third Law of Motion for Electromechanical Systems states that, “for every action there is an
equal and identical reaction.”
Heins' Law of Creation of Momentum
Heins' Third Law of Motion for Electromechanical Systems follows mathematically from Heins' Law
of Creation of Momentum which states that, “for two or more bodies in an isolated system acting upon
each other, their total momentum decreases or increases when acted upon by an internally created
electromagnetic force. Therefore, momentum can either be created (increased) or destroyed
(decreased).
Where an isolated electromagnetic system, is defined as a thermodynamic system enclosed by rigid
immovable walls through which electromagnetic field energy can be created internally within the
system according to the Law of Creation of Energy.
Empirical Experimental Evidence Example 2:
Heins' New Third Law of Motion for Electromechanical Systems
Heins' New Law of Creation of Momentum and Heins' New First Law of Thermodynamics
Where the isolated system's total momentum is decreased (system kinetic energy decrease) and
negative work is performed at infinite efficiency with internally created electromagnetic field energy
and an instantaneously applied electromagnetic force according to Faraday's Law of Induction, Lenz's
Law of Induction, the Work-Energy Principle and the Law of Creation of Energy.
9. And where the isolated system's total momentum is increased (system kinetic energy increase) and
positive work is performed at infinite efficiency with internally created and time delayed
electromagnetic field energy and a time delayed electromagnetic force according to Faraday's New
Law of Induction, Heins' Law of Induction, the Work-Energy Principle, the Law of Creation of Energy
and the New First Law of Thermodynamics.
https://www.youtube.com/watch?v=l2QmG0E2W-o&t=599s