للتحميل: https://mribrahem.github.io/college_research/
جامعة العلوم والتكنولوجيا
معماري مستوى ثالث 2013-2014
الجمالونات
ضمن متطلبات مادة رسومات تنفيذية2
إبراهيم الرداعي
770633517
هو عنصر انشائي ، عادة مصنوع من الخشب أو القطاعات أو المواسير المعدنية أو الخرسانة المسلحة، ويتألف عامة من 3 أجزاء: أحدهم أفقي والآخرين مائلين يستندان على بعضهم البعض من جهة وعلى الجزء الأفقي من الطرف الأخر.كما ان القوة المساهمة في اتزان الجمالون تكون مساوية لبعضها
الدليل الشامل للأشراف على تنفيذ الخوازيق الخرسانيه - كريم سيد جابرKarim Gaber
برعاية : مدونة مهندس مدنى تحت الإنشاء
http://engineer-underconstruction.blogspot.com.eg
لتحميل الملف
http://engineer-underconstruction.blogspot.com.eg/2015/08/blog-post.html
لدليل الشامل للأشراف على تنفيذ الخوازيق الخرسانيه
الاساسات العميقه - الخوازيق
انواع الخوازيق من حيث نظرية العمل
انواع الخوازيق من حيث التصميم
انواع الخوازيق من حيث التكوين
المراحل الاساسيه لعملية تنفيذ الخوازيق
المرحله الاولي : تجهيز المستندات واللوحات
اولا : تقرير الجسات - investigation Report Geotechnical
ثانيا : اللوحات الإنشائية للخوازيق - Structural Drawings for Piles
ثالثا : المواصفات الفنية الخاصة للمشروع
المرحله الثانيه : تجهيز موقع العمل قبل البدء بتنفيذ الخوازيق
اولاً : اعمال الحفر
ثانياً : توقيع وتحديد اماكن الخوازيق
ثالثاً : تجهيز القفص الحديدي
رابعا: تجهيز المعدات المستخدمه اثناء تنفيذ الخوازيق
المرحله الثالثه : حفر وصب الخوازيق
اولاً : تنفيذ الخوازيق بأستخدام ماكينة الاستراوس
ثانياً : تنفيذ الخوازيق بواسطة ماكينة النصف ميكانيكيه
ثالثاً: خطوات حفر الخوازيق بواسطة ماكينة الـ C.F.A فى التربة المتماسكه
رابعاً :خطوات حفر الخوازيق بطريقة الـحفر الدوار – Bored Piles فى التربة الرخوه
خامسا: ملاحظات على خوازيق سند الجار
سادساً : اعداد وتنفيذ الخازوق التجريبي
المرحلة الرابعه:مراجعة و اجراء الاختبارات على الخوازيق
اولاً: اختبار الالترا سونيك - Altrasonic
ثانيا: اختبار التحميل –Loading Test
المرحلة الخامسه
اولاً : تجهيز المعدات المستخدمه لحفر المرحله الثانيه وتكسير رؤوس الخوازيق
ثانيا: البدء فى اعمال الحفر وصب هامة الخوازيق
برعاية : مدونة مهندس مدنى تحت الإنشاء
http://engineer-underconstruction.blogspot.com.eg
لتحميل الملف
http://engineer-underconstruction.blogspot.com.eg/2016/02/Metal.Scaffolding.html
نظم الشدات المعدنيه
1 – نظام الدعامات المفرد مع الكمرات التلسكوبيه – Props with Telescopic Decking Beams
2 – نظام الدعامات المزدوجه الثقيله – Shorbrace System
3 - نظام الدعامات المزدوجه الخفيفه – Light Weight System
3 - نظام الكاب لوك – CupLock System
4 – نظام طبالي الـ U- Form
5 - شدات الخزانات والحوائط
الفصل الأول - مقدمة في الخرسانة المسلحة - تصميم المنشآت الخرسانية المسلحةAhmed Gamal Abdel Gawad
حل أمثلة الفصل الأول :
https://www.mediafire.com/?krb5ubl78obirna
المحاضرة الأولى : مقدمة في الخرسانة المسلحة
http://youtu.be/f5-kOqI3yGQ
المحاضرة الثانية : حديد التسليح
http://youtu.be/Y1ikllWCgIU
المحاضرة الثالثة : أنظمة الوحدات وطرق ومتطلبات التصميم
http://youtu.be/QiDRIFP0Ias
م. أحمد جمال عبد الجواد
اعمال التنفيذ المقاولون العرب - حدادة و نجارة مسلحةAhmed Gamal
تُعد أعمال الحدادة و النجارة من أهم الأعمال الأساسية في الموقع ويقوم
الحداد بإعداد حديد التسليح بأقطاره المختلفة لتكوين الهياكل
الخرسانية الإنشائية بجميع أنواعها
المواصفة القياسية المصرية 7136 لسنة 2010 flash_hero
This document is the Egyptian General Organization for Standardization and Quality's standard number 7136/2010 which sets maximum limits for certain food contaminants. It adopts the limits from the European Directive 1881/2006 and replaces the following Egyptian standards: maximum limits for aflatoxins in food, ochratoxin A in food, iron, copper, zinc in food, lead in food, cadmium in food, mercury in food, and methylmercury in fish. The standard was approved on June 21, 2010.
اشهر اسئلة المقابله الشخصيه (الانترفيو) لمهندس التصميم الانشائي , المهندس المدنيKarim Gaber
بأسلوب عرض جديد , نقدم لكم اول جزء من سلسلة مُذَكِّرَاتُ مُهَنْدِسُ إِنْشَائِيُّ
واول جزء هيكون خاص بأسئلة ومسائل الانترفيو للمهندس الانشائي ومرفق مع كل سؤال المصدر من الكود المصري للخرسانه كلما امكن
هذا الملف برعاية موقع وصفحة مهندس مدني تحت الإنشاء
http://engineer-underconstruction.blogspot.com/
اعداد : م.كريم سيد جابر
أحيانا تمتلك فكرة ما ، وتفتقد الي دليل أو كتالوج لنقل الفكرة الي خدمة أو منتج ملموس تستطيغ تطويره فيما بعد.
تستطيع العبور بفكرتك الي أرض الواقع عبر هذا الكتالوج
A_MukherjeePresn for engineers good fileZiad Salem
This document discusses the evaluation of roll pass design using software. It describes the objectives of roll pass design which is to reduce the cross-sectional area in each pass to gradually form the desired product profile. It then explains the rolling process and factors to consider in roll pass design like taper percentage, groove angles, and fitting. Finally, it shows an example evaluation of 19 passes to reduce a material's cross sectional area and calculates the required power in each pass.
planning maintenance system for engineersZiad Salem
This document provides guidance on the Planned Maintenance System (PMS) used by the Navy to manage shipboard maintenance. It describes the key elements of the 3M system including Maintenance Requirement Cards, Equipment Guide Lists, feedback reports, and responsibilities of personnel involved in maintenance from the Commanding Officer to work center maintenance personnel. Safety precautions and procedures for documenting maintenance, reporting discrepancies, and scheduling preventative maintenance are also outlined.
This document discusses crankshafts, including their function of converting reciprocating motion to rotational motion, materials used such as forged steel, manufacturing processes like hardening, common failure modes from bending and torsional fatigue, and potential material flaws or processing errors that can lead to failures. Key points covered are the crankshaft's role in an engine, how forces like bending and torsion act on it, common failure analysis methods, and factors that contribute to crankshaft damage.
This document describes the design of a double helical gearbox. It includes the design of the pinion, gear, shafts, bearings, housing and selection of lubricating oil. The power input is 300 kW at 2950 rpm to the pinion which drives the gear at 816.5 rpm. The pinion and gear are designed for a life of 108 cycles using involute helical gears made of steel. Dimensions and material specifications are provided for all components along with diagrams of the assembled gearbox. ISO VG 100 oil is recommended for lubrication based on the sliding speed of the gears.
This document discusses fans and their operation. It defines different types of fans including axial fans like propeller, tube-axial, and vane-axial fans. It also defines centrifugal fans and describes their impeller types like backward curved, forward curved, and airfoil. The document discusses factors that determine the suitable fan type like aerodynamic and operational requirements. It also provides equations for calculating fan power requirements and performance at variable speeds. Examples are given showing potential energy savings from improving fan efficiency or using variable speed control instead of a throttle valve.
The document provides maintenance instructions for an induced draft fan used in a kiln. It discusses checking the fan bearings, motor winding temperature, vibration levels, and noise on a regular basis. Specific maintenance tasks are outlined including checking for oil leaks weekly, alarm and trip conditions, wearing parts to examine, notes on wear patterns, and periodically checking the oil levels of non-drive end bearings. The instructions aim to properly maintain the fan to avoid issues like erosion, excessive vibration, and bearing failure.
Gear Fundamentals & _Failure Analysis.pdfZiad Salem
Scott Ouellette from Rexnord Industries presented on gear fundamentals and failure analysis at the Vibration Institute – Piedmont Chapter meeting in Myrtle Beach, SC on May 5th and 6th, 2016. The presentation covered topics including the different styles of gear reducers, best maintenance practices, common failure modes, and technology enhancements that can extend gear and bearing life. Predictive maintenance using data-driven decisions was emphasized as the most effective approach.
Analysis of Bearing and Shaft Failures in Motors.pdfZiad Salem
This document discusses bearing and shaft failures in electric motors. It provides details on bearing stresses, fundamentals, loading principles, lubrication, failure analysis methodology and common failure modes. The key points are:
- Bearing failures account for 50-65% of motor failures, with improper lubrication, contamination, excessive loads and vibration being common causes.
- Proper lubrication and avoiding contamination are critical for bearing life. Grease is most common for small/medium motors, with polyurea greases suitable for higher temperatures.
- A methodology is presented to accurately diagnose bearing failures which considers the failure mode, pattern, appearance, application and maintenance history. The most common failure modes result from fatigue, fret
The document provides an overview of a PLC basics course. It begins with 20 questions about PLC history and applications. It then outlines that the course will familiarize students with PLC structure, operation, and interfaces. It will explain the central processing unit, user memories, and I/O and CPU scans. Students will learn about input/output interfaces, functional operation, and PLC components. The document discusses logic functions, control system options, and why PLCs were adopted. It defines PLCs, describes typical parts and applications. The history of PLC development from the 1960s to distributed control networks is reviewed.
This document describes various defects that can occur in steel billets during the continuous casting process. Section I defines shape defects such as rhomboidity, bulging, concavity, and transverse depression. Section II covers internal defects like diagonal cracking, intercolumnar cracks, and central porosity/pipe. Section III outlines surface defects including bleed outs, reciprocation marks, and scoring. For each defect, the document provides details on causes and recommended actions to check things like mould alignment, secondary cooling, casting speeds, and lubrication.
This document discusses rolling bearing failures and their causes. It was produced by Koyo Corporation of USA, a company located in Westlake, Ohio that manufactures and sells bearings. The document examines why bearings may fail and the root causes.
The document discusses the rolling process for metal forming. Rolling is defined as passing metal between rolls to plastically deform it. There are two main types: hot rolling, which is used for initial breakdown of ingots, and cold rolling, which provides closer dimensional tolerances and better surface finishes. Rolling can produce products like plate, sheet, strip, bars, and pipes. The rolling process involves passing metal through sets of rolls under high compressive forces.
This document provides descriptions of various types of cranes, including:
- Mounted cranes like truck cranes and rough terrain cranes that are mobile.
- Specialized cranes like sidelift cranes for containers and all terrain cranes.
- Crawler cranes that move on tracks and tower cranes fixed to buildings for construction.
- Other cranes suited to specific environments like floating cranes, railroad cranes, and aerial cranes.