Wireless local loop
•Download as PPTX, PDF•
42 likes•24,868 views
This document defines and compares two types of wireless local loop (WLL) technologies: Local Multipoint Distribution Service (LMDS) and Multichannel Multipoint Distribution Service (MMDS). LMDS operates above 20 GHz and provides high-speed broadband, while MMDS operates between 2.1-2.7 GHz and provides lower bandwidth but stronger signals over longer distances. Both can provide voice, data and video services as alternatives to wired local loops. Key differences are that LMDS supports higher data rates over shorter ranges while MMDS has a larger cell size and is more suitable for large networks.
Report
Share
Report
Share
Recommended
Fading Seminar
Loss of strength, A periodic reduction in the received strength of a radio transmission.
This is about the phenomenon of loss of signal in telecommunications.Fading refers to the
time variation of the received signal power caused by changes in the transmission medium or path.
Spread spectrum
Spread spectrum communication uses wideband noise-like signals that are hard to detect, intercept, or jam. It spreads data over multiple frequencies. There are two main techniques: direct sequence spread spectrum multiplies a data signal by a pseudorandom code, and frequency hopping spread spectrum modulates a narrowband carrier that hops between frequencies. Spread spectrum provides benefits like resistance to interference and jamming, better signal quality, and inherent security. It finds applications in wireless networks, Bluetooth, and CDMA cellular systems.
cellular concepts in wireless communication
The document discusses the concept of frequency reuse in cellular networks. It explains that a limited radio spectrum is used to serve millions of subscribers by dividing the network coverage area into cells and reusing frequencies across spatially separated cells. Each cell is allocated a portion of the total available frequencies, and neighboring cells are assigned different frequencies to minimize interference. The frequency reuse factor is defined as the ratio of the minimum distance between co-channel cells to the cell radius. Larger frequency reuse factors provide better isolation between co-channel cells but reduce network capacity. The document also covers additional topics like different channel assignment strategies, handoff methods, interference calculation and optimization of frequency reuse networks.
Wireless local loop
This document discusses wireless local loop (WLL) technology as an alternative to wired telephone networks. WLL uses wireless communication methods like radio or microwave transmission to connect subscriber equipment to the local telephone exchange without relying on copper wires. It describes different types of WLL systems including cordless, cellular, and broadband wireless access. Technical requirements, architectures, implementations, advantages over wired networks, and a case study comparing costs are also summarized. WLL provides a lower-cost option for establishing local telephone connections compared to installing new copper wiring.
Evolution of mobile radio communication
The document discusses the history and evolution of mobile communication systems. It describes how mobile systems started with analog modulation in the 1930s but saw little adoption until the 1960s when the cellular concept was developed. It then outlines the progression from 1G analog systems to 2G digital systems to 3G broadband systems. The document also briefly discusses wireless local loop technologies, Bluetooth, and their applications.
WLAN
A wireless local area network (WLAN) uses radio frequency technology to transmit and receive data over the air, providing mobility and flexibility as an extension or alternative to wired networks. Key advantages of WLANs include productivity, convenience, lower installation costs and mobility. However, WLANs also have disadvantages such as higher costs for wireless network cards and access points, susceptibility to environmental interference, and lower bandwidth capacity compared to wired networks. Common applications of WLANs include use in corporate, education, medical and temporary settings.
Wireless Local Loop
Wireless local loop (WLL) provides wireless connections for stationary users as an alternative to wired connections. It targets the "last mile" between a neighborhood access point and end users. Key advantages include lower installation costs than wiring due to reduced digging and infrastructure requirements, as well as rapid deployment. WLL systems face challenges around spectrum licensing, maintaining wireline-level service quality, and planning networks to achieve high penetration levels while supporting limited user mobility within coverage areas. Common WLL technologies include cellular, satellite, and fixed wireless access using licensed or unlicensed spectrum.
Cellular communication
Cellular communication systems have evolved through multiple generations from analog 1G to digital 4G systems. A cellular network is divided into geographical areas called cells served by base transceiver stations. Cells are grouped into clusters where frequencies are reused to allow for more subscribers. When making a call, the cellular phone registers with the local base station which routes the call through switching centers to establish communication with the intended recipient. Modern cellular networks support additional services beyond voice like texting, internet access, and location tracking through technologies like GSM that employ protocols like TDMA for efficient frequency usage.
Recommended
Fading Seminar
Loss of strength, A periodic reduction in the received strength of a radio transmission.
This is about the phenomenon of loss of signal in telecommunications.Fading refers to the
time variation of the received signal power caused by changes in the transmission medium or path.
Spread spectrum
Spread spectrum communication uses wideband noise-like signals that are hard to detect, intercept, or jam. It spreads data over multiple frequencies. There are two main techniques: direct sequence spread spectrum multiplies a data signal by a pseudorandom code, and frequency hopping spread spectrum modulates a narrowband carrier that hops between frequencies. Spread spectrum provides benefits like resistance to interference and jamming, better signal quality, and inherent security. It finds applications in wireless networks, Bluetooth, and CDMA cellular systems.
cellular concepts in wireless communication
The document discusses the concept of frequency reuse in cellular networks. It explains that a limited radio spectrum is used to serve millions of subscribers by dividing the network coverage area into cells and reusing frequencies across spatially separated cells. Each cell is allocated a portion of the total available frequencies, and neighboring cells are assigned different frequencies to minimize interference. The frequency reuse factor is defined as the ratio of the minimum distance between co-channel cells to the cell radius. Larger frequency reuse factors provide better isolation between co-channel cells but reduce network capacity. The document also covers additional topics like different channel assignment strategies, handoff methods, interference calculation and optimization of frequency reuse networks.
Wireless local loop
This document discusses wireless local loop (WLL) technology as an alternative to wired telephone networks. WLL uses wireless communication methods like radio or microwave transmission to connect subscriber equipment to the local telephone exchange without relying on copper wires. It describes different types of WLL systems including cordless, cellular, and broadband wireless access. Technical requirements, architectures, implementations, advantages over wired networks, and a case study comparing costs are also summarized. WLL provides a lower-cost option for establishing local telephone connections compared to installing new copper wiring.
Evolution of mobile radio communication
The document discusses the history and evolution of mobile communication systems. It describes how mobile systems started with analog modulation in the 1930s but saw little adoption until the 1960s when the cellular concept was developed. It then outlines the progression from 1G analog systems to 2G digital systems to 3G broadband systems. The document also briefly discusses wireless local loop technologies, Bluetooth, and their applications.
WLAN
A wireless local area network (WLAN) uses radio frequency technology to transmit and receive data over the air, providing mobility and flexibility as an extension or alternative to wired networks. Key advantages of WLANs include productivity, convenience, lower installation costs and mobility. However, WLANs also have disadvantages such as higher costs for wireless network cards and access points, susceptibility to environmental interference, and lower bandwidth capacity compared to wired networks. Common applications of WLANs include use in corporate, education, medical and temporary settings.
Wireless Local Loop
Wireless local loop (WLL) provides wireless connections for stationary users as an alternative to wired connections. It targets the "last mile" between a neighborhood access point and end users. Key advantages include lower installation costs than wiring due to reduced digging and infrastructure requirements, as well as rapid deployment. WLL systems face challenges around spectrum licensing, maintaining wireline-level service quality, and planning networks to achieve high penetration levels while supporting limited user mobility within coverage areas. Common WLL technologies include cellular, satellite, and fixed wireless access using licensed or unlicensed spectrum.
Cellular communication
Cellular communication systems have evolved through multiple generations from analog 1G to digital 4G systems. A cellular network is divided into geographical areas called cells served by base transceiver stations. Cells are grouped into clusters where frequencies are reused to allow for more subscribers. When making a call, the cellular phone registers with the local base station which routes the call through switching centers to establish communication with the intended recipient. Modern cellular networks support additional services beyond voice like texting, internet access, and location tracking through technologies like GSM that employ protocols like TDMA for efficient frequency usage.
Mimo in Wireless Communication
MIMO uses multiple antennas at both the transmitter and receiver to improve wireless communication performance. It takes advantage of multipath propagation by using spatial diversity or spatial multiplexing. With spatial diversity, the same information is transmitted from different antennas to improve reliability and coverage. With spatial multiplexing, different data streams are transmitted from different antennas to increase data rates. MIMO can significantly increase capacity, quality, and spectral efficiency compared to single-input systems. It is used in technologies like 3G, 4G, and will be important for 5G networks.
Diversity Techniques in Wireless Communication
This document discusses diversity techniques for wireless communication, including cooperative diversity. It begins by introducing wireless systems and the impairments they face like fading. It then covers various diversity techniques like space, frequency, and time diversity that provide multiple transmission paths to reduce fading. Cooperative diversity is described as allowing single-antenna devices to achieve MIMO-like benefits by sharing antennas. The document outlines cooperative transmission protocols and challenges at different network layers in implementing cooperation. In conclusion, diversity techniques improve performance by providing multiple signal replicas to overcome fading, while cooperation enables reliability and throughput gains with challenges to address across protocol layers.
Multiplexing
This document discusses different types of multiplexing techniques. It describes that multiplexing allows simultaneous transmission of multiple signals across a single data link using a multiplexer device. At the receiving end, a demultiplexer separates the combined signals. The key types of multiplexing covered are frequency division multiplexing (FDM), time division multiplexing (TDM), and wave division multiplexing (WDM). FDM uses different frequencies, TDM divides time into slots, and WDM uses different light wavelengths. Synchronous and asynchronous TDM are also explained, with synchronous TDM assigning fixed time slots and asynchronous using flexible slots.
Diversity techniques presentation material
This document discusses various diversity techniques used in wireless communications to combat fading. It describes types of diversity including time, frequency, multiuser, and space diversity. It also outlines combining techniques such as selection combining, maximal ratio combining and equal gain combining that are used to improve the signal by combining signals from multiple diversity branches. The document concludes by discussing multiple input multiple output (MIMO) systems and orthogonal frequency division multiple access (OFDMA) schemes that exploit diversity and multiuser diversity.
WLAN
This document discusses wireless local area networks (WLANs). It begins by defining WLANs and tracing their history from early developments in the 1970s. The document then lists key advantages of WLANs like installation flexibility, reduced costs, and mobility. Potential disadvantages are also outlined, such as higher costs compared to wired networks and limitations from environmental factors. The document goes on to describe different types of WLAN configurations including infrastructure, peer-to-peer, bridge, and wireless distribution systems. Finally, practical uses of WLANs in corporate, education, finance, and healthcare settings are highlighted.
Wimax ppt
This document summarizes a seminar presentation on WiMAX technology. It describes WiMAX as a wireless broadband technology based on the IEEE 802.16 standard that can provide internet access within a range of up to 31 miles. Key points covered include the basic components of a WiMAX system including towers and receivers, how WiMAX connections work, advantages over other technologies like speed and lack of wired infrastructure, and future applications like integrated laptop access. Issues discussed are the challenges of network deployment and lower costs compared to 3G mobile networks.
Cdma ppt for ECE
CDMA is a digital cellular technology that allows multiple users to access a single radio channel simultaneously through the use of unique code assignments. The document discusses CDMA network architecture, which includes mobile stations, base stations, base station controllers, mobile switching centers, home and visitor location registers, and authentication centers. It also compares CDMA to earlier multiple access technologies like TDMA and FDMA, noting advantages of CDMA like increased capacity and soft handoffs between cells using the same frequency.
Parameters of multipath channel
Naveen Kumar's document discusses small-scale fading in mobile wireless channels. It describes the effects of multipath propagation, Doppler shifts from mobility, and how these cause rapid fluctuations in signal strength over small distances and time periods. It also defines several key parameters that characterize mobile multipath channels, including coherence bandwidth, Doppler spread, coherence time, delay spread, and excess delay spread. These parameters quantify the time-dispersive and time-varying nature of wireless channels.
Propagation Models
The document discusses various radio propagation models used for modeling wireless channels. It describes that propagation models are important for determining coverage areas and improving channel quality. It divides models into outdoor and indoor applications. For outdoor models, it provides details of the Okumura and Hata models, including path loss calculations. It explains the Okumura model is based on measurements and widely used. The Hata model represents Okumura data graphically. For indoor models, it discusses factors like building materials and layouts that influence propagation. Models for partition losses, log-distance path loss, and attenuation factors are covered.
Chap 5 (small scale fading)
The document discusses small-scale fading and multipath propagation in wireless communications. It describes how multipath propagation leads to fading effects as multiple versions of the transmitted signal combine at the receiver. Channel sounding techniques are used to measure the power delay profile and characterize the time dispersion parameters of mobile radio channels, including mean excess delay, RMS delay spread, and maximum excess delay. Direct pulse systems, spread spectrum correlators, and frequency domain analysis are channel sounding methods discussed.
Wi-max Technology PPT
WIMAX stands for Worldwide Interoperability for Microwave Access.WiMAX refers to broadband wireless networks that are based on the IEEE 802.16 standard, which ensures compatibility and interoperability between broadband wireless access equipment.
Wlan architecture
This document provides an overview of wireless local area networks (WLANs), including their architecture and components. It defines key terms like basic service set (BSS), extended service set (ESS), stations, and access points. It describes the two types of BSS architectures - ad-hoc and infrastructure networks. Infrastructure networks use access points to connect stations and form a star topology, while ad-hoc networks connect stations directly without an access point in a peer-to-peer topology. An ESS connects multiple BSSs through a distribution system to increase network coverage.
Gsm architecture
The document provides an overview of GSM architecture including:
1. GSM uses a cellular network architecture with base stations, base station controllers, mobile switching centers, and databases to manage subscriber identity and location.
2. The network allows for voice calls and data services including SMS, and provides security through subscriber authentication and encryption.
3. GSM is a global standard that enabled international roaming and continues to evolve to support higher data rates through technologies like GPRS, EDGE, and WCDMA.
Frequency Division Multiple Access (FDMA)
Frequency Division Multiple Access (FDMA) is a channel access method where the available bandwidth is divided into multiple non-overlapping frequency bands and each user is assigned a specific frequency band. Each user can transmit or receive independently in its assigned frequency band without interference from other users. FDMA requires expensive bandpass filters for each frequency band and has strict linearity requirements for the transmission medium. The number of channels in an FDMA system is calculated by dividing the total available bandwidth minus the guard bands by the bandwidth of each individual channel.
UMTS, Introduction.
Universal mobile telecommunication System (UMTS) is actually the third generation mobile, which uses WCDMA. The Dream was that 2G and 2.5G systems are incompatible around the world.
-Worldwide devices need to have multiple technologies inside of them, i.e. tri-band phones, dual-mode phones
To develop a single standard that would be accepted around the world.
-One device should be able to work anywhere.
Increased data rate.
- Maximum 2048Kbps
UMTS is developed by 3GPP (3 Generation Partnership Project) a joint venture of several organization
3G UMTS is a third-generation (3G): broadband, packet-based transmission of text, digitized voice, video, multimedia at data rates up to 2 Mbps
Also referred to as wideband code division multiple access(WCDMA)
Allows many more applications to be introduce to a worldwide
Also provide new services like alternative billing methods or calling plans.
The higher bandwidth also enables video conferencing or IPTV.
Once UMTS is fully available, computer and phone users can be constantly attached to the Internet wherever they travel and, as they roam, will have the same set of capabilities.
Chap 4 (large scale propagation)
This document discusses mobile radio propagation and propagation models. It begins by introducing how radio channels are random and time-varying. It then covers the free space propagation model and how received power decreases with distance. Reflection, diffraction, and scattering are described as the main propagation mechanisms. The two-ray ground reflection model is presented to model propagation over large distances. Diffraction is explained using the knife-edge diffraction model. Fresnel zones and diffraction gain are also defined.
Trunking Theory
It is description about trunking theory that is used to develop trunked system that can allocate a limited number of channels to a large number of users.
TDMA, FDMA, and CDMA
What are the differences between FDMA, CDMA and TDMA?
How they work?
Adv and DisAdv of them.
Real life applications etc
Frequency Reuse
This document discusses frequency reuse in cellular networks. It describes the frequency bands used in GSM900 and GSM1800 standards. Common frequency reuse patterns include "4 3", "3 3", and dual frequency reuse. Frequency reuse allows the same frequencies to be used in different cells by ensuring sufficient distance between those cells. The document also provides equations to calculate frequency reuse distance based on cell radius and reuse factor.
2. wireless propagation models free space propagation
This document discusses wireless communication propagation mechanisms and propagation models. It explains that when a signal hits an obstacle, it can be reflected, diffracted, or scattered depending on the surface properties. Propagation models are used to predict the average received signal power and design wireless systems by characterizing radio wave propagation based on factors like frequency and distance. Small-scale fading models predict power fluctuations over short ranges, while large-scale models predict average power decreases over large distances between transmitter and receiver.
WAP
WAP (Wireless Application Protocol) is a protocol that allows users to access information and services on the internet using handheld wireless devices like mobile phones. It uses a layered architecture and protocols like WSP, WTP, and WTLS to enable wireless internet access via technologies like GSM, CDMA, and UMTS networks. WAP was designed to work with microbrowsers and uses the markup language WML instead of HTML to optimize content for small screens and low bandwidth connections.
Wireless network security
ALL ABOUT THE PRECAUTIONS AND SECURITY MEASURES NEED TO BE TAKEN IN ORDER TO PREVENT UNAUTHORIZED ACCESS TO UR WIRELESS NETWORK
More Related Content
What's hot
Mimo in Wireless Communication
MIMO uses multiple antennas at both the transmitter and receiver to improve wireless communication performance. It takes advantage of multipath propagation by using spatial diversity or spatial multiplexing. With spatial diversity, the same information is transmitted from different antennas to improve reliability and coverage. With spatial multiplexing, different data streams are transmitted from different antennas to increase data rates. MIMO can significantly increase capacity, quality, and spectral efficiency compared to single-input systems. It is used in technologies like 3G, 4G, and will be important for 5G networks.
Diversity Techniques in Wireless Communication
This document discusses diversity techniques for wireless communication, including cooperative diversity. It begins by introducing wireless systems and the impairments they face like fading. It then covers various diversity techniques like space, frequency, and time diversity that provide multiple transmission paths to reduce fading. Cooperative diversity is described as allowing single-antenna devices to achieve MIMO-like benefits by sharing antennas. The document outlines cooperative transmission protocols and challenges at different network layers in implementing cooperation. In conclusion, diversity techniques improve performance by providing multiple signal replicas to overcome fading, while cooperation enables reliability and throughput gains with challenges to address across protocol layers.
Multiplexing
This document discusses different types of multiplexing techniques. It describes that multiplexing allows simultaneous transmission of multiple signals across a single data link using a multiplexer device. At the receiving end, a demultiplexer separates the combined signals. The key types of multiplexing covered are frequency division multiplexing (FDM), time division multiplexing (TDM), and wave division multiplexing (WDM). FDM uses different frequencies, TDM divides time into slots, and WDM uses different light wavelengths. Synchronous and asynchronous TDM are also explained, with synchronous TDM assigning fixed time slots and asynchronous using flexible slots.
Diversity techniques presentation material
This document discusses various diversity techniques used in wireless communications to combat fading. It describes types of diversity including time, frequency, multiuser, and space diversity. It also outlines combining techniques such as selection combining, maximal ratio combining and equal gain combining that are used to improve the signal by combining signals from multiple diversity branches. The document concludes by discussing multiple input multiple output (MIMO) systems and orthogonal frequency division multiple access (OFDMA) schemes that exploit diversity and multiuser diversity.
WLAN
This document discusses wireless local area networks (WLANs). It begins by defining WLANs and tracing their history from early developments in the 1970s. The document then lists key advantages of WLANs like installation flexibility, reduced costs, and mobility. Potential disadvantages are also outlined, such as higher costs compared to wired networks and limitations from environmental factors. The document goes on to describe different types of WLAN configurations including infrastructure, peer-to-peer, bridge, and wireless distribution systems. Finally, practical uses of WLANs in corporate, education, finance, and healthcare settings are highlighted.
Wimax ppt
This document summarizes a seminar presentation on WiMAX technology. It describes WiMAX as a wireless broadband technology based on the IEEE 802.16 standard that can provide internet access within a range of up to 31 miles. Key points covered include the basic components of a WiMAX system including towers and receivers, how WiMAX connections work, advantages over other technologies like speed and lack of wired infrastructure, and future applications like integrated laptop access. Issues discussed are the challenges of network deployment and lower costs compared to 3G mobile networks.
Cdma ppt for ECE
CDMA is a digital cellular technology that allows multiple users to access a single radio channel simultaneously through the use of unique code assignments. The document discusses CDMA network architecture, which includes mobile stations, base stations, base station controllers, mobile switching centers, home and visitor location registers, and authentication centers. It also compares CDMA to earlier multiple access technologies like TDMA and FDMA, noting advantages of CDMA like increased capacity and soft handoffs between cells using the same frequency.
Parameters of multipath channel
Naveen Kumar's document discusses small-scale fading in mobile wireless channels. It describes the effects of multipath propagation, Doppler shifts from mobility, and how these cause rapid fluctuations in signal strength over small distances and time periods. It also defines several key parameters that characterize mobile multipath channels, including coherence bandwidth, Doppler spread, coherence time, delay spread, and excess delay spread. These parameters quantify the time-dispersive and time-varying nature of wireless channels.
Propagation Models
The document discusses various radio propagation models used for modeling wireless channels. It describes that propagation models are important for determining coverage areas and improving channel quality. It divides models into outdoor and indoor applications. For outdoor models, it provides details of the Okumura and Hata models, including path loss calculations. It explains the Okumura model is based on measurements and widely used. The Hata model represents Okumura data graphically. For indoor models, it discusses factors like building materials and layouts that influence propagation. Models for partition losses, log-distance path loss, and attenuation factors are covered.
Chap 5 (small scale fading)
The document discusses small-scale fading and multipath propagation in wireless communications. It describes how multipath propagation leads to fading effects as multiple versions of the transmitted signal combine at the receiver. Channel sounding techniques are used to measure the power delay profile and characterize the time dispersion parameters of mobile radio channels, including mean excess delay, RMS delay spread, and maximum excess delay. Direct pulse systems, spread spectrum correlators, and frequency domain analysis are channel sounding methods discussed.
Wi-max Technology PPT
WIMAX stands for Worldwide Interoperability for Microwave Access.WiMAX refers to broadband wireless networks that are based on the IEEE 802.16 standard, which ensures compatibility and interoperability between broadband wireless access equipment.
Wlan architecture
This document provides an overview of wireless local area networks (WLANs), including their architecture and components. It defines key terms like basic service set (BSS), extended service set (ESS), stations, and access points. It describes the two types of BSS architectures - ad-hoc and infrastructure networks. Infrastructure networks use access points to connect stations and form a star topology, while ad-hoc networks connect stations directly without an access point in a peer-to-peer topology. An ESS connects multiple BSSs through a distribution system to increase network coverage.
Gsm architecture
The document provides an overview of GSM architecture including:
1. GSM uses a cellular network architecture with base stations, base station controllers, mobile switching centers, and databases to manage subscriber identity and location.
2. The network allows for voice calls and data services including SMS, and provides security through subscriber authentication and encryption.
3. GSM is a global standard that enabled international roaming and continues to evolve to support higher data rates through technologies like GPRS, EDGE, and WCDMA.
Frequency Division Multiple Access (FDMA)
Frequency Division Multiple Access (FDMA) is a channel access method where the available bandwidth is divided into multiple non-overlapping frequency bands and each user is assigned a specific frequency band. Each user can transmit or receive independently in its assigned frequency band without interference from other users. FDMA requires expensive bandpass filters for each frequency band and has strict linearity requirements for the transmission medium. The number of channels in an FDMA system is calculated by dividing the total available bandwidth minus the guard bands by the bandwidth of each individual channel.
UMTS, Introduction.
Universal mobile telecommunication System (UMTS) is actually the third generation mobile, which uses WCDMA. The Dream was that 2G and 2.5G systems are incompatible around the world.
-Worldwide devices need to have multiple technologies inside of them, i.e. tri-band phones, dual-mode phones
To develop a single standard that would be accepted around the world.
-One device should be able to work anywhere.
Increased data rate.
- Maximum 2048Kbps
UMTS is developed by 3GPP (3 Generation Partnership Project) a joint venture of several organization
3G UMTS is a third-generation (3G): broadband, packet-based transmission of text, digitized voice, video, multimedia at data rates up to 2 Mbps
Also referred to as wideband code division multiple access(WCDMA)
Allows many more applications to be introduce to a worldwide
Also provide new services like alternative billing methods or calling plans.
The higher bandwidth also enables video conferencing or IPTV.
Once UMTS is fully available, computer and phone users can be constantly attached to the Internet wherever they travel and, as they roam, will have the same set of capabilities.
Chap 4 (large scale propagation)
This document discusses mobile radio propagation and propagation models. It begins by introducing how radio channels are random and time-varying. It then covers the free space propagation model and how received power decreases with distance. Reflection, diffraction, and scattering are described as the main propagation mechanisms. The two-ray ground reflection model is presented to model propagation over large distances. Diffraction is explained using the knife-edge diffraction model. Fresnel zones and diffraction gain are also defined.
Trunking Theory
It is description about trunking theory that is used to develop trunked system that can allocate a limited number of channels to a large number of users.
TDMA, FDMA, and CDMA
What are the differences between FDMA, CDMA and TDMA?
How they work?
Adv and DisAdv of them.
Real life applications etc
Frequency Reuse
This document discusses frequency reuse in cellular networks. It describes the frequency bands used in GSM900 and GSM1800 standards. Common frequency reuse patterns include "4 3", "3 3", and dual frequency reuse. Frequency reuse allows the same frequencies to be used in different cells by ensuring sufficient distance between those cells. The document also provides equations to calculate frequency reuse distance based on cell radius and reuse factor.
2. wireless propagation models free space propagation
This document discusses wireless communication propagation mechanisms and propagation models. It explains that when a signal hits an obstacle, it can be reflected, diffracted, or scattered depending on the surface properties. Propagation models are used to predict the average received signal power and design wireless systems by characterizing radio wave propagation based on factors like frequency and distance. Small-scale fading models predict power fluctuations over short ranges, while large-scale models predict average power decreases over large distances between transmitter and receiver.
What's hot (20)
2. wireless propagation models free space propagation
2. wireless propagation models free space propagation
Viewers also liked
WAP
WAP (Wireless Application Protocol) is a protocol that allows users to access information and services on the internet using handheld wireless devices like mobile phones. It uses a layered architecture and protocols like WSP, WTP, and WTLS to enable wireless internet access via technologies like GSM, CDMA, and UMTS networks. WAP was designed to work with microbrowsers and uses the markup language WML instead of HTML to optimize content for small screens and low bandwidth connections.
Wireless network security
ALL ABOUT THE PRECAUTIONS AND SECURITY MEASURES NEED TO BE TAKEN IN ORDER TO PREVENT UNAUTHORIZED ACCESS TO UR WIRELESS NETWORK
WAP- Wireless Application Protocol
This document provides an overview of the Wireless Application Protocol (WAP). It describes WAP as an open standard that allows mobile devices to access internet content and services. The summary includes:
1) WAP defines an architecture and protocol for delivering internet content to mobile phones and other wireless devices in an optimized way.
2) The WAP architecture includes components like WAP clients, WAP gateways, WAP proxies, and WAP servers that work together to deliver internet content to mobile devices.
3) WAP uses protocols like WTP, WSP, WTLS and WDP to optimize delivery of content over wireless networks in an efficient, secure manner for devices with limited capabilities.
Wireless Application Protocol ppt
WAP (Wireless Application Protocol) is a standard for accessing information on mobile devices like phones. It uses WML (Wireless Markup Language) instead of HTML. WAP has a layered architecture including application, session, security, transaction, and transport layers. It allows access to the internet from mobile devices in a standardized way and is supported by most phone manufacturers and wireless networks.
Wireless Network Security
The document provides an overview of wireless network security, outlining common issues, threats, and security measures for wireless networks. It discusses standards and protocols like WEP, WPA, and WPA2 and provides practical tips for securing a wireless network, such as enabling encryption, changing default settings, and using firewalls. The document also briefly discusses future trends in wireless network security.
Wireless Networking Security
An open, unencrypted wireless network can 'sniff' or capture and record the traffic, gain unauthorized access to internal network resources as well as to the internet, and then use the information and resources to perform disruptive or illegal acts.Many laptop computers have wireless cards pre-installed. The ability to enter a network while mobile has great benefits. However, wireless networking is prone to some security. Wireless networks relatively easy to break into, and even use wireless technology to hack into wired networks.The risks to users of wireless technology have increased as the service has become more popular.As a result, it is very important that enterprises define effective wireless security policies that guard against unauthorized access to important resources.
Bluetooth
Bluetooth is a short-range wireless technology standard for exchanging data between devices like mobile phones, headphones, smartwatches and laptops. It was developed in 1994 and first released in 1999. Bluetooth allows for wireless connections between devices that are in close proximity to each other, within a range of around 10 meters. It uses radio waves to enable wireless communication between multiple devices without interference.
Ad-Hoc Networks
The document discusses ad-hoc networks and their key characteristics. It describes several challenges in ad-hoc networks including limited battery power, dynamic network topology, and scalability issues. It also summarizes several ad-hoc network routing protocols (e.g. DSDV, AODV, DSR), addressing both table-driven and on-demand approaches. Additionally, it outlines some ad-hoc MAC protocols like MACA and PAMAS that aim to manage shared wireless medium access.
Satellite communications
The document discusses satellite communications, including the basic components and orbits of communication satellites, how they are used to transmit signals, and some of their applications such as television, radio, and mobile phones. Key orbits discussed include LEO, MEO, and GEO orbits, and the advantages and disadvantages of each for communication purposes. The document also covers frequency allocation and some of the challenges of using satellites for communication.
4g technology
This document summarizes a presentation on 4G technology. It begins by outlining earlier wireless technologies like 1G, 2G, and 3G. It then defines 4G as characterized by high-speed data rates up to 100 Mbps for mobile users and 1 Gbps for stationary users. Key technologies that enable 4G are described like MIMO antennas, IPv6, VoIP, OFDM, and software-defined radio. Applications and advantages of 4G include support for multimedia, global access, and improved spectral efficiency. Challenges in fully realizing 4G capabilities are also discussed.
Viewers also liked (10)
Similar to Wireless local loop
Module 4 emerging wireless technologies and standards
The document discusses emerging wireless technologies and standards covered in Module 4. It provides an overview of Wireless Local Loop (WLL) technology, including its need and architecture. WLL uses radio connectivity to provide telephone network access, replacing wired connections. It has advantages like lower costs and faster deployment compared to installing cables. The document also covers the IEEE 802.11 standard for Wireless Local Area Networks (WLANs), including the development of different standards, network architectures, and equipment.
10700119013_abir.pptx
This document provides an overview of mobile computing technologies including GSM, GPRS, CDMA, and WLANs. It discusses the objectives and history of GSM and describes its architecture and evolution. Key features of GPRS are outlined including its use of packet data networks. The document also summarizes CDMA technology, highlighting its use of code division multiple access. Advantages and disadvantages of WLANs are presented. Finally, the document defines global mobile satellite systems and discusses their benefits and drawbacks for communication.
2010fall ch8 18ulziisuren
This document discusses various access technologies used for broadband internet connections, including DSL, cable, wireless, and microwave radio systems. It describes technologies like ADSL, VDSL, HDSL, and DOCSIS that provide internet access over existing telephone lines or cable infrastructure. Wireless options like Wi-Fi, WiMAX, MMDS, and 3G cellular are also summarized. The document concludes with an overview of microwave radio systems, discussing technologies like parabolic antennas, repeaters, multipath fading, and environmental factors that can impact microwave signals.
Wireless Local Loop
Wireless local loop (WLL) uses radio signals instead of copper wires to connect subscribers to the public switched telephone network. There are several categories of WLL implementation, including analog cellular, digital cellular, personal communications networks, cordless telephones, and proprietary systems. WLL provides advantages over wired connections such as lower installation and operating costs and faster construction times by shortening wiring requirements.
Wireless Local Loop
Wireless local loop (WLL) uses radio signals instead of copper wires to connect subscribers to the public switched telephone network. There are several categories of WLL implementation, including analog cellular, digital cellular, personal communications networks, cordless telephones, and proprietary systems. WLL provides advantages over wired connections such as lower installation and operating costs and faster construction times by shortening wiring requirements.
Presentation on Wireless devices
The document provides information about various wireless technologies including Bluetooth, Infrared, Wi-Fi, GSM, and GPRS. It discusses the advantages and disadvantages of each technology. Bluetooth allows for short range wireless data transfer between devices at low power. Infrared also enables short range communication but has slower speeds and can be impacted by environmental factors. Wi-Fi provides wireless internet access over local areas and has benefits of mobility, convenience and low installation costs compared to wired networks. GSM is a cellular standard that offers worldwide voice and data connectivity across mobile networks. GPRS extends GSM to enable packet-based mobile data services including basic internet access.
WLL,WLAN & BLUETOOTH
This document summarizes key information about wireless communication technologies including Wireless Local Loop (WLL), Wireless Local Area Network (WLAN), and Bluetooth.
WLL uses radio signals to connect subscribers to telephone networks as an alternative to copper wiring, reducing construction and operating costs. WLAN allows wireless connectivity between devices within a limited area like a home or office, providing installation flexibility and reduced costs compared to wired networks. Bluetooth operates in the unlicensed 2.4 GHz band using frequency-hopping spread spectrum, chopping up and transmitting data across multiple bands to enable short-range wireless communication between devices.
Broadband technology wired and wireless
This document discusses different types of broadband technologies including wired and wireless options. It focuses on Asymmetric Digital Subscriber Line (ADSL) technology, how it works by splitting bandwidth across telephone lines, and uses discrete multi-tone (DMT) modulation. Wireless broadband technologies discussed include fixed wireless services like Local Multipoint Distribution System (LMDS) and Multichannel Multipoint Distribution Service (MMDS) that provide internet access for homes and offices over a wide area. The document also covers broadband speeds, ranges provided by different technologies, and services that can be accessed through broadband internet connections.
It fundamentals wired and wireless troubleshooting
- The document discusses wireless local area networks (WLANs) based on the IEEE 802.11 standard. It describes the need for WLANs due to factors like mobility and ease of installation.
- It covers different aspects of IEEE 802.11 WLANs including transmission media (infrared, radio frequency, microwave), topology (basic service set, basic service area), medium access control, and security.
- The key transmission media discussed are direct sequence spread spectrum (DSSS) using Barker sequences, and frequency hopping spread spectrum (FHSS) using pseudorandom number generation.
3g cellular telephony
The document summarizes a seminar presentation on 3G cellular telephony. It discusses the evolution from 1G to 2G to 3G networks, highlighting technologies like WCDMA, CDMA2000, and TD-SCDMA. It covers applications of 3G like mobile TV and video calling. Advantages include improved voice quality and broadband data access. Challenges include a lack of killer apps and issues with global standards. The future may include 4G networks and technologies like WiMAX and greater spectral efficiency.
Chap 01 introduction to wirelless
The document provides an overview of wireless communication technologies including Bluetooth, Infrared Data Association (IrDA), HomeRF, IEEE 802.11 WiFi, 802.16 WiMax, and wireless hotspots. It defines wireless communication as the transfer of information between two or more points not connected by an electrical conductor using radio waves. Key aspects of various wireless standards are discussed, such as operating frequency and speed, range, and security features. Limitations of wireless technologies including a finite radio spectrum and potential for interference are also noted.
Wireless Communication
CDMA2000 is an evolution of CDMA technology that provides higher data rates and improved voice quality over CDMA. It spreads signals across a wider bandwidth and uses techniques like multicarrier modulation to support higher data rates. CDMA2000 represents a family of standards that offer both voice and high-speed data services. It provides more efficient use of spectrum and supports advanced mobile services while maintaining backward compatibility.
Cellular concept
The document outlines the key concepts and units covered in a course on wireless and cellular communications. Unit 1 discusses cellular system design fundamentals including frequency reuse, interference, and capacity. Unit 2 covers speech coding techniques and radio channel characterization. Unit 3 discusses modulation techniques, diversity techniques, and OFDM. Unit 4 introduces MAC protocols for wireless networks. Unit 5 introduces satellite communication systems. Reference books on wireless communication principles and standards are also listed.
Bsnl training 4th year
BSNL is India's largest telecommunication company, providing basic telephony and 3G services. The document discusses BSNL's history and network infrastructure, including how calls are routed through exchanges and technologies like PCM, GSM, broadband, WiMAX, and optical fibers. It describes the components and functions of telecom exchanges, switches, and transmission systems that enable telecommunication services.
13 mainstream wireless communication technologies -by C&T RF Antennas Inc
Wireless communication is a communication method that utilizes the characteristics of electromagnetic wave signals propagating in free space to exchange information. Wireless communication technology has many advantages and low cost. Wireless communication technology does not need to establish physical lines, and it does not need a lot of manpower to lay cables. Moreover, wireless communication technology is not limited by the industrial environment, and it has strong ability to resist environmental changes. Also relatively easy, compared to the traditional wired communication setup and maintenance, wireless network maintenance can be completed through remote diagnosis, more convenient; scalability is strong, when the network needs to be expanded, wireless communication does not need to expand the wiring; flexibility, wireless The network is not limited by the terrain of the environment, and when the use environment changes, the wireless network can be adapted to the requirements of the new environment with little adjustment.
Bsnl ppt
This document summarizes a seminar on technology in mobile communication. It discusses BSNL as a major mobile service provider in India, the services it offers including landlines, mobile phones, and broadband. It also covers the history of telephone exchanges from manual to electronic, describes fiber optic communication technologies, mobile communication standards like GSM, and introduces internet networks and broadband services.
Priaynshu sharma
The presentation provides an overview of Reliance Communications Ltd and summarizes key topics about wireless communication technologies used by the company. It discusses the founder of Reliance Communications, outlines the presentation topics, and provides details about the company profile, departments, GSM and CDMA technologies, and generations of internet from 1G to 5G. Figures and diagrams are included to illustrate concepts like network architecture and components for GSM and CDMA networks.
Broadband
Broadband internet access provides high-speed internet connection through technologies like DSL and cable modem. DSL transmits digital data over telephone lines and comes in varieties like ADSL, VDSL, etc. Cable modem uses unused bandwidth on cable television networks. Broadband access became widespread in the early 2000s and is now considered 256 kbps or faster. India saw many broadband providers emerge around 2000 offering services mainly in major cities using DSL, cable, fiber or wireless technologies.
Transmission Media।।Circuit Switching।।Telephone Network।।DSL।।Cable Modems।।...
In data communication,
Transmission media is a pathway that carries the information from sender to receiver.
We use different types of cables or waves to transmit data.
Data is transmitted normally through electrical or electromagnetic signals.
Synchronous optical networking (SONET) is a standardized digital communication protocol that is used to transmit a large volume of data over relatively long distances using a fiber optic medium. With SONET, multiple digital data streams are transferred at the same time over optical fiber using LEDs and laser beams.
Wireless Digital Subscriber Line
WDSL using WiMAX is the topic and WiMAX is the new upcoming wireless technology the file contains history of wireless systems dsl wifi and wimax
Similar to Wireless local loop (20)
Module 4 emerging wireless technologies and standards
Module 4 emerging wireless technologies and standards
It fundamentals wired and wireless troubleshooting
It fundamentals wired and wireless troubleshooting
13 mainstream wireless communication technologies -by C&T RF Antennas Inc
13 mainstream wireless communication technologies -by C&T RF Antennas Inc
Transmission Media।।Circuit Switching।।Telephone Network।।DSL।।Cable Modems।।...
Transmission Media।।Circuit Switching।।Telephone Network।।DSL।।Cable Modems।।...
Recently uploaded
Front Desk Management in the Odoo 17 ERP
Front desk officers are responsible for taking care of guests and customers. Their work mainly involves interacting with customers and business partners, either in person or through phone calls.
AI Risk Management: ISO/IEC 42001, the EU AI Act, and ISO/IEC 23894
As artificial intelligence continues to evolve, understanding the complexities and regulations regarding AI risk management is more crucial than ever.
Amongst others, the webinar covers:
• ISO/IEC 42001 standard, which provides guidelines for establishing, implementing, maintaining, and continually improving AI management systems within organizations
• insights into the European Union's landmark legislative proposal aimed at regulating AI
• framework and methodologies prescribed by ISO/IEC 23894 for identifying, assessing, and mitigating risks associated with AI systems
Presenters:
Miriama Podskubova - Attorney at Law
Miriama is a seasoned lawyer with over a decade of experience. She specializes in commercial law, focusing on transactions, venture capital investments, IT, digital law, and cybersecurity, areas she was drawn to through her legal practice. Alongside preparing contract and project documentation, she ensures the correct interpretation and application of European legal regulations in these fields. Beyond client projects, she frequently speaks at conferences on cybersecurity, online privacy protection, and the increasingly pertinent topic of AI regulation. As a registered advocate of Slovak bar, certified data privacy professional in the European Union (CIPP/e) and a member of the international association ELA, she helps both tech-focused startups and entrepreneurs, as well as international chains, to properly set up their business operations.
Callum Wright - Founder and Lead Consultant Founder and Lead Consultant
Callum Wright is a seasoned cybersecurity, privacy and AI governance expert. With over a decade of experience, he has dedicated his career to protecting digital assets, ensuring data privacy, and establishing ethical AI governance frameworks. His diverse background includes significant roles in security architecture, AI governance, risk consulting, and privacy management across various industries, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: June 26, 2024
Tags: ISO/IEC 42001, Artificial Intelligence, EU AI Act, ISO/IEC 23894
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
SYBCOM SEM III UNIT 1 INTRODUCTION TO ADVERTISING
Integrated Marketing Communications (IMC)- Concept, Features, Elements, Role of advertising in IMC
Advertising: Concept, Features, Evolution of Advertising, Active Participants, Benefits of advertising to Business firms and consumers.
Classification of advertising: Geographic, Media, Target audience and Functions.
2024 KWL Back 2 School Summer Conference
Join educators from the US and worldwide at this year’s conference, themed “Strategies for Proficiency & Acquisition,” to learn from top experts in world language teaching.
Understanding and Interpreting Teachers’ TPACK for Teaching Multimodalities i...
Presented as a plenary session in iTELL 2024 in Salatiga on 4 July 2024.
The plenary focuses on understanding and intepreting relevant TPACK competence for teachers to be adept in teaching multimodality in the digital age. It juxtaposes the results of research on multimodality with its contextual implementation in the teaching of English subject in the Indonesian Emancipated Curriculum.
How to Add Colour Kanban Records in Odoo 17 Notebook
In Odoo 17, you can enhance the visual appearance of your Kanban view by adding color-coded records using the Notebook feature. This allows you to categorize and distinguish between different types of records based on specific criteria. By adding colors, you can quickly identify and prioritize tasks or items, improving organization and efficiency within your workflow.
How to Configure Time Off Types in Odoo 17
Now we can take look into how to configure time off types in odoo 17 through this slide. Time-off types are used to grant or request different types of leave. Only then the authorities will have a clear view or a clear understanding of what kind of leave the employee is taking.
How to Show Sample Data in Tree and Kanban View in Odoo 17
In Odoo 17, sample data serves as a valuable resource for users seeking to familiarize themselves with the functionalities and capabilities of the software prior to integrating their own information. In this slide we are going to discuss about how to show sample data to a tree view and a kanban view.
The Value of Time ~ A Story to Ponder On (Eng. & Chi.).pptx
A PowerPoint presentation on the importance of time management based on a meaningful story to ponder on. The texts are in English and Chinese.
For the Video (texts in English and Chinese) with audio narration and explanation in English, please check out the Link:
https://www.youtube.com/watch?v=lUtjLnxEBKo
UNIT 5 - PATIENT SAFETY & CLINICAL RISK.pptx
UNIT 5 - PATIENT SAFTEY & CLINICAL RISK
SEM II
NURSING INFORMATICS
Beyond the Advance Presentation for By the Book 9
In June 2020, L.L. McKinney, a Black author of young adult novels, began the #publishingpaidme hashtag to create a discussion on how the publishing industry treats Black authors: “what they’re paid. What the marketing is. How the books are treated. How one Black book not reaching its parameters casts a shadow on all Black books and all Black authors, and that’s not the same for our white counterparts.” (Grady 2020) McKinney’s call resulted in an online discussion across 65,000 tweets between authors of all races and the creation of a Google spreadsheet that collected information on over 2,000 titles.
While the conversation was originally meant to discuss the ethical value of book publishing, it became an economic assessment by authors of how publishers treated authors of color and women authors without a full analysis of the data collected. This paper would present the data collected from relevant tweets and the Google database to show not only the range of advances among participating authors split out by their race, gender, sexual orientation and the genre of their work, but also the publishers’ treatment of their titles in terms of deal announcements and pre-pub attention in industry publications. The paper is based on a multi-year project of cleaning and evaluating the collected data to assess what it reveals about the habits and strategies of American publishers in acquiring and promoting titles from a diverse group of authors across the literary, non-fiction, children’s, mystery, romance, and SFF genres.
Still I Rise by Maya Angelou | Summary and Analysis
Still I Rise by Maya Angelou
-Table of Contents
● Questions to be Addressed
● Introduction
● About the Author
● Analysis
● Key Literary Devices Used in the Poem
1. Simile
2. Metaphor
3. Repetition
4. Rhetorical Question
5. Structure and Form
6. Imagery
7. Symbolism
● Conclusion
● References
-Questions to be Addressed
1. How does the meaning of the poem evolve as we progress through each stanza?
2. How do similes and metaphors enhance the imagery in "Still I Rise"?
3. What effect does the repetition of certain phrases have on the overall tone of the poem?
4. How does Maya Angelou use symbolism to convey her message of resilience and empowerment?
No, it's not a robot: prompt writing for investigative journalism
How to use generative AI tools like ChatGPT and Gemini to generate story ideas for investigations, identify potential sources, and help with coding and writing.
A talk from the Centre for Investigative Journalism Summer School, July 2024
CHUYÊN ĐỀ DẠY THÊM TIẾNG ANH LỚP 12 - GLOBAL SUCCESS - FORM MỚI 2025 - HK1 (C...
CHUYÊN ĐỀ DẠY THÊM TIẾNG ANH LỚP 12 - GLOBAL SUCCESS - FORM MỚI 2025 - HK1 (C...Nguyen Thanh Tu Collection
https://app.box.com/s/ujmypxg6wegshvv0hmylp5m8hx4dnzrcDelegation Inheritance in Odoo 17 and Its Use Cases
There are 3 types of inheritance in odoo Classical, Extension, and Delegation. Delegation inheritance is used to sink other models to our custom model. And there is no change in the views. This slide will discuss delegation inheritance and its use cases in odoo 17.
Recently uploaded (20)
Traces of the Holocaust in our communities in Levice Sovakia and Constanta Ro...
Traces of the Holocaust in our communities in Levice Sovakia and Constanta Ro...
AI Risk Management: ISO/IEC 42001, the EU AI Act, and ISO/IEC 23894
AI Risk Management: ISO/IEC 42001, the EU AI Act, and ISO/IEC 23894
Understanding and Interpreting Teachers’ TPACK for Teaching Multimodalities i...
Understanding and Interpreting Teachers’ TPACK for Teaching Multimodalities i...
How to Add Colour Kanban Records in Odoo 17 Notebook
How to Add Colour Kanban Records in Odoo 17 Notebook
How to Show Sample Data in Tree and Kanban View in Odoo 17
How to Show Sample Data in Tree and Kanban View in Odoo 17
The Value of Time ~ A Story to Ponder On (Eng. & Chi.).pptx
The Value of Time ~ A Story to Ponder On (Eng. & Chi.).pptx
Righteous among Nations - eTwinning e-book (1).pdf
Righteous among Nations - eTwinning e-book (1).pdf
Still I Rise by Maya Angelou | Summary and Analysis
Still I Rise by Maya Angelou | Summary and Analysis
No, it's not a robot: prompt writing for investigative journalism
No, it's not a robot: prompt writing for investigative journalism
NationalLearningCamp-2024-Orientation-for-RO-SDO.pptx
NationalLearningCamp-2024-Orientation-for-RO-SDO.pptx
CHUYÊN ĐỀ DẠY THÊM TIẾNG ANH LỚP 12 - GLOBAL SUCCESS - FORM MỚI 2025 - HK1 (C...
CHUYÊN ĐỀ DẠY THÊM TIẾNG ANH LỚP 12 - GLOBAL SUCCESS - FORM MỚI 2025 - HK1 (C...
Delegation Inheritance in Odoo 17 and Its Use Cases
Delegation Inheritance in Odoo 17 and Its Use Cases
Wireless local loop
- 1. Prepared by, SANJAY C. CHAURSIYA ELECTRONICS AND COMMUNICATION GOVERNMENT ENGINEERING COLLEGE, BHUJ PAYAL R. PANDYA ELECTRONICS AND COMMUNICATION GEC- BHUJ
- 2. Contents What is Wireless Local Loop (WLL) - Definition Access technology Features • Types of Wireless local loop (WLL) 1) Local Multipoint Distribution Service (LMDS) - Definition - Advantages and Disadvantages 2)Multichannel Multipoint Distributed Service (MMDS) -Definition -Advantages and Disadvantages Comparison between LMDS and MMDS. Future scope Manufacturer of WLL
- 3. What is Wireless Local Loop In a telephone network a Wireless Local Loop is a generic term for an access system that uses a wireless link to connects subscribers to the local telephone station in place of conventional copper wire. In Fixed Wireless Access Systems the Wireless Local Loop is popular, WLL is also called as Fixed wireless loop. The function of a WLL is to make primary access to local telephone station using wireless link.
- 4. WIRELESS LOCAL LOOP In the WLL system there are two concepts namely Narrowband WLL – offers a replacement for existing telephony services. Broadband WLL – provides high-speed two-way voice and data service. Thus, WLL is the best system to handle high data traffic in the local loop system.
- 5. How its works WLL, which stands for Wireless Local Loop that connects subscribers to the PSTN using radio signals as a substitute for copper for all or part of the connection between the subscriber and the switch. WLL phones in homes, offices or even boats connect with a wireless system in a manner similar to that of CDMA cell phones.
- 7. Access Technology Frequency Division Multiple Access Code Division Multiple Access Time Division Multiple Access The one being used in India is CDMA.
- 8. Features Better quality of service Compatible with other cellular technologies Scalability
- 9. Advantages of WLL The cost of wireless equipment is less. Easy installation They have good scale of installation.
- 10. TYPES OF WLL There are two type of WLL technique available. They are i. Local Multipoint Distribution Service (LMDS) ii. Multichannel Multipoint Distribution Service(MMDS)
- 11. Local Multipoint Distribution Service Local Multipoint Distribution Service (LMDS) is the broadband wireless point-to-multipoint communication system operating above 20 GHz that can be used to provide two-way voice, data, video services and Internet. Fixed broadband technology that can provide a wide variety of wireless services High-speed Internet access Real-time multimedia file transfer Remote access to local area networks Interactive video, video-on-demand, video conferencing Telephone service
- 13. Advantages and Disadvantages Advantages 1. Easily developed 2. Cost effective 3. High data rate 4. scalable architecture Disadvantages 1.The drawback of LMDS is that it needs large number of base stations because of its short range of operation frpm the base station.
- 14. Multichannel Multipoint Distribution Service MMDS is a broadcasting and communications service that operates in the ultra−high−frequency(UHF) portion of the radio spectrum between 2.1 and 2.7 GHz. MMDS is also known as wireless cable. In MMDS, a medium−power transmitter is located with an Omni−directional broadcast antenna at or near the highest topographical point in the intended coverage area. The workable radius can reach up to 70 miles in flat terrain. Fixed broadband wireless technology similar to LMDS. Can transmit video, voice, or data signals at 1.5 to 2 Mbps downstream and 320 Kbps upstream.
- 15. MMDS Structure
- 16. Advantages and Disadvantages Advantages 1. High signal strength 2. Cell size is small 3. Less cost than LMDS 4. Larger wavelength Disadvantages 1. Physical limitations The transmitted power as the FCC did not allow the power transmitted of the base station serving area that is more than 50 km.
- 17. Comparison between LMDS MMDS • Both are used for TV and 2-way internet service using fixed wireless access. Due to lower RF frequency range MMDS provide lesser BW compare to LMDS. LMDS offers higher data rates. MMDS signal can cover long distance and hence used in large cell network scenario. LMDS signal can cover short distance from Base Station equipments. Due to larger wavelength MMDS signals are less susceptible to rain and absorption losses compare to shorter wavelength LDMS signal.
- 18. Future Scope of WLL CDMA based WLL As the cost of mobile technology decreases, it is becoming more and more economic to install 'fixed' lines using WLL.
- 19. Manufacturers of WLL Airspan Alvarion Cambridge Broadband P-Com Sony Ericsson SR Telecom Intracom Telecom
- 20. Question What is the primary difference between wireless local loop and a CDMA cell phone? Wireless local loop phones are for use in a relatively fixed location and can use A/C instead of batteries.