CMC-Vol. 47, No. 3, 2015

Open Access

ARTICLE

Simple Efficient Smart Finite Elements for the Analysis of Smart Composite Beams
M. C. Ray¹, L. Dong², S. N. Atluri³
CMC-Computers, Materials & Continua, Vol.47, No.3, pp. 143-177, 2015, DOI:10.3970/cmc.2015.047.143
Abstract This paper is concerned with the development of new simple 4-noded locking-alleviated smart finite elements for modeling the smart composite beams. The exact solutions for the static responses of the overall smart composite beams are also derived for authenticating the new smart finite elements. The overall smart composite beam is composed of a laminated substrate conventional composite beam, and a piezoelectric layer attached at the top surface of the substrate beam. The piezoelectric layer acts as the actuator layer of the smart beam. Alternate finite element models of the beams, based on an “equivalent single… More >

View
1704

Download
1646
Open Access

ARTICLE

Research and Improvement on the Accuracy of Discontinuous Smoothed Particle Hydrodynamics (DSPH) Method

CMC-Computers, Materials & Continua, Vol.47, No.3, pp. 179-201, 2015, DOI:10.3970/cmc.2015.047.179
Abstract Discontinuous smoothed particle hydrodynamics (DSPH) method based on traditional SPH method, which can be used to simulate discontinuous physics problems near interface or boundary. Previous works showed that DSPH method has a good application prospect [Xu et al, 2013], but further verification and improvement are demanded. In this paper, we investigate the accuracy of DSPH method by some numerical models. Moreover, to improve the accuracy of DSPH method, first order and second order multidimensional RDSPH methods are proposed by following the idea of restoring particle consistency in SPH (RSPH) method which has shown good results More >

View
1626

Download
1262
Open Access

ARTICLE

Mechanical Analysis of the Coupled Gas-Solid-Thermal Model during Rock Damage
Cao Zhengzheng¹, Zhou Yuejin^1,2, Zhang Qi¹, Wang Erqian¹
CMC-Computers, Materials & Continua, Vol.47, No.3, pp. 203-215, 2015, DOI:10.3970/cmc.2015.047.203
Abstract Gas fracturing technology is the key to the exploration for unconventional petroleum resources and other engineering industries, so the research on the coupled gas-solid-thermal model during rock damage has the important significance to the development of gas fracturing technology. By introducing rock damage variable, the coupled gas-solid-thermal model during rock damage is established in this paper, besides, the rock damage constitutive is written with MATLAB software, which is embedded in the multi-physics coupling software COMSOL in the process of numerical computation. Based on this, the damage rule of rock mass around drilling under high pressure… More >

View
1579

Download
1141
Open Access

ARTICLE

Prediction of Concrete Cubic Compressive Strength Using ANN Based Size Effect Model
Q.W. Yang¹, S.G. Du^1,2
CMC-Computers, Materials & Continua, Vol.47, No.3, pp. 217-236, 2015, DOI:10.3970/cmc.2015.047.217
Abstract Size effect is a major issue in concrete structures and occurs in concrete in any loading conditions. In this study, size effect on concrete cubic compressive strength is modeled with a back-propagation neural network. The main advantage in using an artificial neural network (ANN) technique is that the network is built directly from experimental data without any simplifying assumptions via the self-organizing capabilities of the neural network. The proposed ANN model is verified by using 27 experimental data sets collected from the literature. For the large specimens, a modified ANN is developed in the paper More >

View
2036

Download
1448

Per Page:

View

1704

Download

1646

View

1626

Download

1262

View

1579

Download

1141

View

2036

Download

1448

Further Information

Guidelines

Follow Us

Join Us

Contact Us

WhatsApp:

Share Link