-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Inertial tolerancing and capability indices in an assembly production
Authors:
Pierre-Antoine Adragna,
Maurice Pillet,
Fabien Formosa,
Serge Samper
Abstract:
Traditional tolerancing considers the conformity of a batch when the batch satisfies the specifications. The characteristic is considered for itself and not according to its incidence in the assembly. Inertial tolerancing proposes another alternative of tolerancing in order to guarantee the final assembly characteristic. The inertia I2 = \sqrt{δ^2 + σ^2} is not toleranced by a tolerance interval…
▽ More
Traditional tolerancing considers the conformity of a batch when the batch satisfies the specifications. The characteristic is considered for itself and not according to its incidence in the assembly. Inertial tolerancing proposes another alternative of tolerancing in order to guarantee the final assembly characteristic. The inertia I2 = \sqrt{δ^2 + σ^2} is not toleranced by a tolerance interval but by a scalar representing the maximum inertia that the characteristic should not exceed. We detail how to calculate the inertial tolerances according to two cases, one aims to guarantee an inertia of the assembly characteristic the other a tolerance interval on the assembly characteristic by a Cpk capability index, in the particular but common case of uniform tolerances or more general with non uniform tolerances. An example will be detailed to show the results of the different tolerancing methods.
△ Less
Submitted 1 February, 2010;
originally announced February 2010.
-
A proposition of 3D inertial tolerancing to consider the statistical combination of the location and orientation deviations
Authors:
Pierre-Antoine Adragna,
Serge Samper,
Maurice Pillet
Abstract:
Tolerancing of assembly mechanisms is a major interest in the product life cycle. One can distinguish several models with growing complexity, from 1-dimensional (1D) to 3-dimensional (3D) (including form deviations), and two main tolerancing assumptions, the worst case and the statistical hypothesis. This paper presents an approach to 3D statistical tolerancing using a new acceptance criterion.…
▽ More
Tolerancing of assembly mechanisms is a major interest in the product life cycle. One can distinguish several models with growing complexity, from 1-dimensional (1D) to 3-dimensional (3D) (including form deviations), and two main tolerancing assumptions, the worst case and the statistical hypothesis. This paper presents an approach to 3D statistical tolerancing using a new acceptance criterion. Our approach is based on the 1D inertial acceptance criterion that is extended to 3D and form acceptance. The modal characterisation is used to describe the form deviation of a geometry as the combination of elementary deviations (location, orientation and form). The proposed 3D statistical tolerancing is applied on a simple mechanism with lever arm. It is also compared to the traditional worst-case tolerancing using a tolerance zone.
△ Less
Submitted 1 February, 2010;
originally announced February 2010.
-
Caractérisation des défauts d'une surface sphérique par décomposition modale
Authors:
Hugues Favreliere,
Serge Samper,
Pierre-Antoine Adragna
Abstract:
The [ISO 1101] standard specifies the form errors with geometrical tolerances using the zone concept.To complete this concept, we present a generic method which adapts to any geometry and allows to describe any kind of errors. Thus,we can dissociate the part errors according to reference categories: position, orientation,form, waviness and roughnesses. Starting from a cloud of poinds representin…
▽ More
The [ISO 1101] standard specifies the form errors with geometrical tolerances using the zone concept.To complete this concept, we present a generic method which adapts to any geometry and allows to describe any kind of errors. Thus,we can dissociate the part errors according to reference categories: position, orientation,form, waviness and roughnesses. Starting from a cloud of poinds representing the error measurement, the "modal" method decompose, like Fourier series,this error in a sum of sorted errors according to the ircomplexity degree (a number of "wavinesses"). In addition, we propose to show, on a simple example, that according to error complexity to be characterized, an interpolation by the modal method allows to optimize the measuring strategy.
△ Less
Submitted 1 February, 2010;
originally announced February 2010.
-
Modeling of 2D and 3D Assemblies Taking Into Account Form Errors of Plane Surfaces
Authors:
Serge Samper,
Pierre-Antoine Adragna,
Hugues Favreliere,
Maurice Pillet
Abstract:
The tolerancing process links the virtual and the real worlds. From the former, tolerances define a variational geometrical language (geometric parameters). From the latter, there are values limiting those parameters. The beginning of a tolerancing process is in this duality. As high precision assemblies cannot be analyzed with the assumption that form errors are negligible, we propose to apply…
▽ More
The tolerancing process links the virtual and the real worlds. From the former, tolerances define a variational geometrical language (geometric parameters). From the latter, there are values limiting those parameters. The beginning of a tolerancing process is in this duality. As high precision assemblies cannot be analyzed with the assumption that form errors are negligible, we propose to apply this process to assemblies with form errors through a new way of allowing to parameterize forms and solve their assemblies. The assembly process is calculated through a method of allowing to solve the 3D assemblies of pairs of surfaces having form errors using a static equilibrium. We have built a geometrical model based on the modal shapes of the ideal surface. We compute for the completely deterministic contact points between this pair of shapes according to a given assembly process. The solution gives an accurate evaluation of the assembly performance. Then we compare the results with or without taking into account the form errors. When we analyze a batch of assemblies, the problem is to compute for the nonconformity rate of a pilot production according to the functional requirements. We input probable errors of surfaces (position, orientation, and form) in our calculus and we evaluate the quality of the results compared with the functional requirements. The pilot production then can or cannot be validated.
△ Less
Submitted 1 February, 2010;
originally announced February 2010.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
A PMT-Block test bench
Authors:
P. Adragna,
A. Antonaki,
I. Boudagov,
V. Cavasinni,
D. Costanzo,
T. Del Prete,
A. Dotti,
D. Fassouliotis,
V. Giakoumopoulou,
N. Giokaris,
C. Guicheney,
E. Karali,
J. Khubua,
M. Lebessi,
A. Lupi,
A. Manoussakis,
E. Mazzoni,
I. Minashvili,
M. Morphi,
G. F. Pagani,
R. Paoletti,
D. Rizzi,
C. Roda,
F. Sarri,
Ath. Staveris-Polykalas
, et al. (8 additional authors not shown)
Abstract:
The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called {\it PMT-Block}. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a {\it 3-in-1} card, which provides shaping, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block…
▽ More
The front-end electronics of the ATLAS hadronic calorimeter (Tile Cal) is housed in a unit, called {\it PMT-Block}. The PMT-Block is a compact instrument comprising a light mixer, a PMT together with its divider and a {\it 3-in-1} card, which provides shaping, amplification and integration for the signals. This instrument needs to be qualified before being assembled on the detector. A PMT-Block test bench has been developed for this purpose. This test bench is a system which allows fast, albeit accurate enough, measurements of the main properties of a complete PMT-Block. The system, both hardware and software, and the protocol used for the PMT-Blocks characterisation are described in detail in this report. The results obtained in the test of about 10000 PMT-Blocks needed for the instrumentation of the ATLAS (LHC-CERN) hadronic Tile Calorimeter are also reported.
△ Less
Submitted 8 May, 2006;
originally announced May 2006.
-
The ATLAS Tile Calorimeter Test Beam Monitoring Program
Authors:
Paolo Adragna,
Andrea Dotti,
Chiara Roda
Abstract:
During 2003 test beam session for ATLAS Tile Calorimeter a monitoring program has been developed to ease the setup of correct running condition and the assessment of data quality. The program has been built using the Online Software services provided by the ATLAS Online Software group. The first part of this note contains a brief overview of these services followed by the full description of Til…
▽ More
During 2003 test beam session for ATLAS Tile Calorimeter a monitoring program has been developed to ease the setup of correct running condition and the assessment of data quality. The program has been built using the Online Software services provided by the ATLAS Online Software group. The first part of this note contains a brief overview of these services followed by the full description of Tile Calorimeter monitoring program architecture and features. Performances and future upgrades are discussed in the final part of this note.
△ Less
Submitted 29 May, 2004;
originally announced May 2004.