-
Strain stiffening due to stretching of entangled particles in random packings of granular materials
Authors:
Eric Brown,
Kevin A. Mitchell,
Alice Nasto,
Athanasios Athanassiadis,
Heinrich M. Jaeger
Abstract:
Stress-strain relations for random packings of entangling chains under triaxial compression can exhibit strain stiffening and sustain stresses several orders-of-magnitude beyond typical granular materials. X-ray tomography reveals the transition to this strong strain stiffening occurs when chains are long enough to entangle an average of about one chain each, which results in system-filling cluste…
▽ More
Stress-strain relations for random packings of entangling chains under triaxial compression can exhibit strain stiffening and sustain stresses several orders-of-magnitude beyond typical granular materials. X-ray tomography reveals the transition to this strong strain stiffening occurs when chains are long enough to entangle an average of about one chain each, which results in system-filling clusters of entangled chains. The number of entanglements is nearly proportional to the area surrounded by entangling particles with an excluded volume effect. A tendency was found for chain links to stretch when the packing was strained. The slope of the stress-strain relation of the packing can be calculated from a mean-field model consisting of the product of the effective extensional modulus of the chain, packing fraction, probability of stretched links, and the ratio of strain of stretched links to packing strain. The stress-strain model requires as input measurements of the ratio between local particle deformation and global average strain, and the probability of stretching for non-rigid particles. This results in a quadratic prediction for the stress-strain curve, with a curvature that agrees with experiments within the model uncertainties. This model explains that the strength of these packings comes from stretching of the links of chains, but only when the system-filling network of entanglements provides constraints that prevents failure by shear banding, so that particles must be deformed to move further under strain. In this model, the increasing slope of the stress-strain curve is mainly due to the fraction of stretched links increasing with strain. This model for the stress-strain relation is shown to be generalizable to different shapes of entangling particles by applying it to staples.
△ Less
Submitted 16 August, 2024;
originally announced August 2024.
-
High-rate electron detectors to study Compton scattering in non-perturbative QED
Authors:
Antonios Athanassiadis,
John Hallford,
Louis Helary,
Luke Hendriks,
Ruth Magdalena Jacobs,
Jenny List,
Gudrid Moortgat-Pick,
Evan Ranken,
Stefan Schmitt,
Matthew Wing
Abstract:
Research in non-perturbative QED in strong-field backgrounds has gained interest in recent years, due to advances in high-intensity laser technologies that make extreme fields accessible in the laboratory. One key signature of strong-field QED is non-linear Compton scattering in collisions between a relativistic electron beam and a high-intensity laser pulse. In the vicinity of strong fields, the…
▽ More
Research in non-perturbative QED in strong-field backgrounds has gained interest in recent years, due to advances in high-intensity laser technologies that make extreme fields accessible in the laboratory. One key signature of strong-field QED is non-linear Compton scattering in collisions between a relativistic electron beam and a high-intensity laser pulse. In the vicinity of strong fields, the electron gains a larger effective mass, which leads to a laser-intensity-dependent shift of the kinematic Compton edge and the appearance of higher-order harmonics in the energy spectrum. One of the challenges of measuring the Compton energy spectrum in laser-electron-beam collisions is the enormous flux of outgoing Compton-scattered electrons and photons, ranging from $10^3$ to $10^9$ particles per collision. We present a combined detector system for high-rate Compton electron detection in the context of the planned LUXE experiment, consisting of a spatially segmented gas-filled Cherenkov detector and a scintillator screen imaged by an optical camera system. The detectors are placed in a forward dipole spectrometer to resolve the electron energy spectrum. Finally, we discuss techniques to reconstruct the non-linear Compton electron energy spectrum from the high-rate electron detection system and to extract the features of non-perturbative QED from the spectrum.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Technical Design Report for the LUXE Experiment
Authors:
H. Abramowicz,
M. Almanza Soto,
M. Altarelli,
R. Aßmann,
A. Athanassiadis,
G. Avoni,
T. Behnke,
M. Benettoni,
Y. Benhammou,
J. Bhatt,
T. Blackburn,
C. Blanch,
S. Bonaldo,
S. Boogert,
O. Borysov,
M. Borysova,
V. Boudry,
D. Breton,
R. Brinkmann,
M. Bruschi,
F. Burkart,
K. Büßer,
N. Cavanagh,
F. Dal Corso,
W. Decking
, et al. (109 additional authors not shown)
Abstract:
This Technical Design Report presents a detailed description of all aspects of the LUXE (Laser Und XFEL Experiment), an experiment that will combine the high-quality and high-energy electron beam of the European XFEL with a high-intensity laser, to explore the uncharted terrain of strong-field quantum electrodynamics characterised by both high energy and high intensity, reaching the Schwinger fiel…
▽ More
This Technical Design Report presents a detailed description of all aspects of the LUXE (Laser Und XFEL Experiment), an experiment that will combine the high-quality and high-energy electron beam of the European XFEL with a high-intensity laser, to explore the uncharted terrain of strong-field quantum electrodynamics characterised by both high energy and high intensity, reaching the Schwinger field and beyond. The further implications for the search of physics beyond the Standard Model are also discussed.
△ Less
Submitted 2 August, 2023; v1 submitted 1 August, 2023;
originally announced August 2023.
-
Antibubbles enable tunable payload release with low-intensity ultrasound
Authors:
Nicolas Moreno-Gomez,
Athanasios G. Athanassiadis,
Albert T. Poortinga,
Peer Fischer
Abstract:
The benefits of ultrasound are its ease-of-use and its ability to precisely deliver energy in opaque and complex media. However, most materials responsive to ultrasound show a weak response, requiring the use of high powers, which are associated with undesirable streaming, cavitation, or temperature rise. These effects hinder response control and may even cause damage to the medium where the ultra…
▽ More
The benefits of ultrasound are its ease-of-use and its ability to precisely deliver energy in opaque and complex media. However, most materials responsive to ultrasound show a weak response, requiring the use of high powers, which are associated with undesirable streaming, cavitation, or temperature rise. These effects hinder response control and may even cause damage to the medium where the ultrasound is applied. Moreover, materials that are currently in use rely on all-or-nothing effects, limiting the ability to fine-tune the response of the material on the fly. For these reasons, there is a need for materials that can respond to low intensity ultrasound with programmable responses. Here it is demonstrated that antibubbles are a low-intensity-ultrasound-responsive material system that can controllably release a payload using acoustic pressures in the kPa range. Varying their size and composition tunes the release pressure, and the response can be switched between a single release and stepwise release across multiple ultrasound pulses. Observations using confocal and high-speed microscopy revealed different ways that can lead to release. These findings lay the groundwork to design antibubbles that controllably respond to low-intensity ultrasound, opening a wide range of applications ranging from ultrasound-responsive material systems to carriers for targeted delivery.
△ Less
Submitted 26 July, 2023; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Effects of multi-jet coupling on propulsive performance in underwater pulsed jets
Authors:
Athanasios G. Athanassiadis,
Douglas P. Hart
Abstract:
Despite the importance of pulsed jets for underwater propulsion, the effect of multiple-jet interactions remains poorly understood. We experimentally investigate how interactions between neighboring jets in a pulsed-jet thruster affect the thruster's propulsive performance. Using high-speed fluorescence imaging, we investigate the mutual influence of two pulsed jets under conditions relevant to lo…
▽ More
Despite the importance of pulsed jets for underwater propulsion, the effect of multiple-jet interactions remains poorly understood. We experimentally investigate how interactions between neighboring jets in a pulsed-jet thruster affect the thruster's propulsive performance. Using high-speed fluorescence imaging, we investigate the mutual influence of two pulsed jets under conditions relevant to low-speed maneuvering in a vehicle ($Re\approx350,$ $L/D\leq2$). Thrust production and propulsive efficiency are evaluated for different nozzle spacings using a new force estimation technique based on the fluorescence data. This analysis reveals that, compared to non-interacting jets, the efficiency and thrust generated by the pair of interacting jets can fall by as much as 10\% when the jets are brought into close proximity. Empirically, the thrust $T$ falls off with the non-dimensional jet spacing $\widetildeΔ$ as $T=T_\infty(1-Co \widetildeΔ^{-6})$ for a thrust coupling coefficient $Co=2.04 \pm 0.11.$ Finally, we predict this leading order dependence of thrust on spacing using a model that relates the thrust and efficiency drop to streamline curvature and vortex induction at the nozzles.
△ Less
Submitted 19 July, 2016; v1 submitted 18 April, 2016;
originally announced April 2016.
-
X-ray tomography system to investigate granular materials during mechanical loading
Authors:
Athanasios G Athanassiadis,
Patrick J. La Rivière,
Emil Sidky,
Charles Pelizzari,
Xiaochuan Pan,
Heinrich M. Jaeger
Abstract:
We integrate a small and portable medical x-ray device with mechanical testing equipment to enable in-situ, non-invasive measurements of a granular material's response to mechanical loading. We employ an orthopedic C-arm as the x-ray source and detector to image samples mounted in the materials tester. We discuss the design of a custom rotation stage, which allows for sample rotation and tomograph…
▽ More
We integrate a small and portable medical x-ray device with mechanical testing equipment to enable in-situ, non-invasive measurements of a granular material's response to mechanical loading. We employ an orthopedic C-arm as the x-ray source and detector to image samples mounted in the materials tester. We discuss the design of a custom rotation stage, which allows for sample rotation and tomographic reconstruction under applied compressive stress. We then discuss the calibration of the system for 3d computed tomography, as well as the subsequent image reconstruction process. Using this system to reconstruct packings of 3d-printed particles, we resolve packing features with 0.52 mm resolution in a (60 mm)$^3$ field of view. By analyzing the performance bounds of the system, we demonstrate that the reconstructions exhibit only moderate noise.
△ Less
Submitted 28 July, 2014; v1 submitted 10 June, 2014;
originally announced June 2014.
-
Particle Shape Effects on the Stress Response of Granular Packings
Authors:
Athanasios G. Athanassiadis,
Marc Z. Miskin,
Paul Kaplan,
Nicholas Rodenberg,
Seung Hwan Lee,
Jason Merritt,
Eric Brown,
John Amend,
Hod Lipson,
Heinrich M. Jaeger
Abstract:
We present measurements of the stress response of packings formed from a wide range of particle shapes. Besides spheres these include convex shapes such as the Platonic solids, truncated tetrahedra, and triangular bipyramids, as well as more complex, non-convex geometries such as hexapods with various arm lengths, dolos, and tetrahedral frames. All particles were 3D-printed in hard resin. Well-def…
▽ More
We present measurements of the stress response of packings formed from a wide range of particle shapes. Besides spheres these include convex shapes such as the Platonic solids, truncated tetrahedra, and triangular bipyramids, as well as more complex, non-convex geometries such as hexapods with various arm lengths, dolos, and tetrahedral frames. All particles were 3D-printed in hard resin. Well-defined initial packing states were established through preconditioning by cyclic loading under given confinement pressure. Starting from such initial states, stress-strain relationships for axial compression were obtained at four different confining pressures for each particle type. While confining pressure has the largest overall effect on the mechanical response, we find that particle shape controls the details of the stress-strain curves and can be used to tune packing stiffness and yielding. By correlating the experimentally measured values for the effective Young's modulus under compression, yield stress and energy loss during cyclic loading, we identify trends among the various shapes that allow for designing a packing's aggregate behavior.
△ Less
Submitted 15 October, 2013; v1 submitted 9 August, 2013;
originally announced August 2013.
-
Strain-stiffening in random packings of entangled granular chains
Authors:
Eric Brown,
Alice Nasto,
Athanasios G. Athanassiadis,
Heinrich M. Jaeger
Abstract:
Random packings of granular chains are presented as a model polymer system to investigate the contribution of entanglements to strain-stiffening in the absence of Brownian motion. The chain packings are sheared in triaxial compression experiments. For short chain lengths, these packings yield when the shear stress exceeds a the scale of the confining pressure, similar to packings of spherical part…
▽ More
Random packings of granular chains are presented as a model polymer system to investigate the contribution of entanglements to strain-stiffening in the absence of Brownian motion. The chain packings are sheared in triaxial compression experiments. For short chain lengths, these packings yield when the shear stress exceeds a the scale of the confining pressure, similar to packings of spherical particles. In contrast, packings of chains which are long enough to form loops exhibit strain-stiffening, in which the effective stiffness of the material increases with strain, similar to many polymer materials. The latter packings can sustain stresses orders-of-magnitude greater than the confining pressure, and do not yield until the chain links break. X-ray tomography measurements reveal that the strain-stiffening packings contain system-spanning clusters of entangled chains.
△ Less
Submitted 16 August, 2011;
originally announced August 2011.