Showing 1–35 of 35 results for author: Barzi, E

Interim report for the International Muon Collider Collaboration (IMCC)

Authors: C. Accettura, S. Adrian, R. Agarwal, C. Ahdida, C. Aimé, A. Aksoy, G. L. Alberghi, S. Alden, N. Amapane, D. Amorim, P. Andreetto, F. Anulli, R. Appleby, A. Apresyan, P. Asadi, M. Attia Mahmoud, B. Auchmann, J. Back, A. Badea, K. J. Bae, E. J. Bahng, L. Balconi, F. Balli, L. Bandiera, C. Barbagallo , et al. (362 additional authors not shown)

Abstract: The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accele… ▽ More The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider. △ Less

Submitted 17 July, 2024; originally announced July 2024.

Comments: This document summarises the International Muon Collider Collaboration (IMCC) progress and status of the Muon Collider R&D programme

What is Needed for BiSCO to Work in a Dipole Insert for 20 Tesla Hybrid Accelerator Magnets

Authors: E. Barzi

Abstract: A major focus of the global HEP community is on high field superconducting magnets made of High Temperature Superconductors (HTS) for future Energy Frontier Programs. Within the U.S. Magnet Development Program (US MDP), a key task is that of developing HTS inserts producing fields larger than 5 T within 15 T outserts made of Nb$_3$Sn to generate 20 T+ for future accelerators. Bi$_2$Sr$_2$CaCu$_2$O… ▽ More A major focus of the global HEP community is on high field superconducting magnets made of High Temperature Superconductors (HTS) for future Energy Frontier Programs. Within the U.S. Magnet Development Program (US MDP), a key task is that of developing HTS inserts producing fields larger than 5 T within 15 T outserts made of Nb$_3$Sn to generate 20 T+ for future accelerators. Bi$_2$Sr$_2$CaCu$_2$O$_8$$_-$$_x$ (BiSCO) is the only high T c superconductor available as an isotropic round multifilamentary wire, which is ideal for producing the flat cables (i.e., Rutherford type cables) that are used in accelerator magnets. Significant progress in the development and industrialization of BiSCO wires has been made over the last decade. However, several challenges remain for this HTS to be used successfully in hybrid magnets. The following is required to improve performance, lower costs and simplify the processing of BiSCO accelerator magnets: (1) The development and design, in collaboration with industry, of BiSCO wires that are adequate for Rutherford cabling; (2) The development of insulation processes and materials that prevent leaks when heat treated in highly corrosive oxygen; (3) Control of stresses and strains; and (4) Integration of high pressure heat treatment with a new approach that will lower costs and simplify processing. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Comments: 14th International Particle Accelerator Conference (IPAC'23)

Report number: FERMILAB-CONF-23-191-TD

Detailed Report on the Measurement of the Positive Muon Anomalous Magnetic Moment to 0.20 ppm

Authors: D. P. Aguillard, T. Albahri, D. Allspach, A. Anisenkov, K. Badgley, S. Baeßler, I. Bailey, L. Bailey, V. A. Baranov, E. Barlas-Yucel, T. Barrett, E. Barzi, F. Bedeschi, M. Berz, M. Bhattacharya, H. P. Binney, P. Bloom, J. Bono, E. Bottalico, T. Bowcock, S. Braun, M. Bressler, G. Cantatore, R. M. Carey, B. C. K. Casey , et al. (168 additional authors not shown)

Abstract: We present details on a new measurement of the muon magnetic anomaly, $a_μ= (g_μ-2)/2$. The result is based on positive muon data taken at Fermilab's Muon Campus during the 2019 and 2020 accelerator runs. The measurement uses $3.1$ GeV$/c$ polarized muons stored in a $7.1$-m-radius storage ring with a $1.45$ T uniform magnetic field. The value of $ a_μ$ is determined from the measured difference b… ▽ More We present details on a new measurement of the muon magnetic anomaly, $a_μ= (g_μ-2)/2$. The result is based on positive muon data taken at Fermilab's Muon Campus during the 2019 and 2020 accelerator runs. The measurement uses $3.1$ GeV$/c$ polarized muons stored in a $7.1$-m-radius storage ring with a $1.45$ T uniform magnetic field. The value of $ a_μ$ is determined from the measured difference between the muon spin precession frequency and its cyclotron frequency. This difference is normalized to the strength of the magnetic field, measured using Nuclear Magnetic Resonance (NMR). The ratio is then corrected for small contributions from beam motion, beam dispersion, and transient magnetic fields. We measure $a_μ= 116 592 057 (25) \times 10^{-11}$ (0.21 ppm). This is the world's most precise measurement of this quantity and represents a factor of $2.2$ improvement over our previous result based on the 2018 dataset. In combination, the two datasets yield $a_μ(\text{FNAL}) = 116 592 055 (24) \times 10^{-11}$ (0.20 ppm). Combining this with the measurements from Brookhaven National Laboratory for both positive and negative muons, the new world average is $a_μ$(exp) $ = 116 592 059 (22) \times 10^{-11}$ (0.19 ppm). △ Less

Submitted 22 May, 2024; v1 submitted 23 February, 2024; originally announced February 2024.

Comments: 48 pages, 29 figures; 4 pages of Supplement Material; version accepted for publication in Physical Review D

Report number: FERMILAB-PUB-24-0084-AD-CSAID-PPD

Development and Test of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management

Authors: I. Novitski, A. V. Zlobin, M. Baldini, S. Krave, D. Orris, D. Turrioni, E. Barzi

Abstract: The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with development and fabrication of large-aperture high-field magnets based on the Nb3Sn technology for the HL-LHC makes this technology interesting for the 2nd EIC IR. This… ▽ More The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with development and fabrication of large-aperture high-field magnets based on the Nb3Sn technology for the HL-LHC makes this technology interesting for the 2nd EIC IR. This paper summarizes the results of feasibility studies of large-aperture high-field Nb3Sn dipoles and quadrupoles for the 2nd EIC IR. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: IPAC 2023. arXiv admin note: text overlap with arXiv:2304.13155

Report number: FERMILAB-CONF-23-386-TD

A New Ductile, Tougher Resin for Impregnation of Superconducting Magnets

Authors: Emanuela Barzi, Daniele Turrioni, Ibrahim Kesgin, Masaki Takeuchi, Wang Xudong, Tatsushi Nakamoto, Akihiro Kikuchi

Abstract: A major remaining challenge for $Nb_3Sn$ high field magnets is their training due to random temperature variations in the coils. The main objective of our research is to reduce or eliminate it by finding novel impregnation materials with respect to the epoxies currently used. An organic olefin-based thermosetting dicyclopentadiene (DCP) resin, $C_10H_12$, commercially available in Japan as TELENE… ▽ More A major remaining challenge for $Nb_3Sn$ high field magnets is their training due to random temperature variations in the coils. The main objective of our research is to reduce or eliminate it by finding novel impregnation materials with respect to the epoxies currently used. An organic olefin-based thermosetting dicyclopentadiene (DCP) resin, $C_10H_12$, commercially available in Japan as TELENE by RIMTEC, was used to impregnate a short $Nb_3Sn$ undulator coil developed by ANL and FNAL. This magnet reached short sample limit after only two quenches, compared with several dozens when $CTD-101K$ was used. Ductility, i.e. the ability to accept large strains, and toughness were identified as key properties to achieve these results. In addition, we have been investigating whether mixing TELENE with high heat capacity ceramic powders, increases the specific heat ($C_p$) of impregnated $Nb_3Sn$ superconducting magnets. The viscosity, heat capacity, thermal conductivity, and other physical properties of TELENE with $high-C_p$ powder fillers were measured in this study as a function of temperature and magnetic field. Mixing TELENE with either $Gd_2O_3$, $Gd_2O_2S$, and $HoCu_2$ increases its $C_p$ tenfold. We have also investigated the effect on the mechanical properties of pure and mixed TELENE under 10 $Gy$ of gamma-ray irradiation at the Takasaki Advanced Radiation Research Institute in Takasaki, Japan. Whereas both $TELENE-82wt\%Gd_2O_3$ and $TELENE-83wt\%HoCu_2$ performed well, the best mechanical properties after irradiation were obtained for $TELENE-87wt\%Gd2O_2S$. Testing a short undulator in the future with the latter impregnation material will verify whether it will further improve the coils thermal stability. Short magnet training will lead to better magnet reliability, lower risk and substantial saving in accelerators commissioning costs. △ Less

Submitted 7 November, 2023; originally announced November 2023.

Measurement of the Positive Muon Anomalous Magnetic Moment to 0.20 ppm

Authors: D. P. Aguillard, T. Albahri, D. Allspach, A. Anisenkov, K. Badgley, S. Baeßler, I. Bailey, L. Bailey, V. A. Baranov, E. Barlas-Yucel, T. Barrett, E. Barzi, F. Bedeschi, M. Berz, M. Bhattacharya, H. P. Binney, P. Bloom, J. Bono, E. Bottalico, T. Bowcock, S. Braun, M. Bressler, G. Cantatore, R. M. Carey, B. C. K. Casey , et al. (166 additional authors not shown)

Abstract: We present a new measurement of the positive muon magnetic anomaly, $a_μ\equiv (g_μ- 2)/2$, from the Fermilab Muon $g\!-\!2$ Experiment using data collected in 2019 and 2020. We have analyzed more than 4 times the number of positrons from muon decay than in our previous result from 2018 data. The systematic error is reduced by more than a factor of 2 due to better running conditions, a more stable… ▽ More We present a new measurement of the positive muon magnetic anomaly, $a_μ\equiv (g_μ- 2)/2$, from the Fermilab Muon $g\!-\!2$ Experiment using data collected in 2019 and 2020. We have analyzed more than 4 times the number of positrons from muon decay than in our previous result from 2018 data. The systematic error is reduced by more than a factor of 2 due to better running conditions, a more stable beam, and improved knowledge of the magnetic field weighted by the muon distribution, $\tildeω'^{}_p$, and of the anomalous precession frequency corrected for beam dynamics effects, $ω_a$. From the ratio $ω_a / \tildeω'^{}_p$, together with precisely determined external parameters, we determine $a_μ= 116\,592\,057(25) \times 10^{-11}$ (0.21 ppm). Combining this result with our previous result from the 2018 data, we obtain $a_μ\text{(FNAL)} = 116\,592\,055(24) \times 10^{-11}$ (0.20 ppm). The new experimental world average is $a_μ(\text{Exp}) = 116\,592\,059(22)\times 10^{-11}$ (0.19 ppm), which represents a factor of 2 improvement in precision. △ Less

Submitted 4 October, 2023; v1 submitted 11 August, 2023; originally announced August 2023.

Comments: 8 pages, 3 figures

Report number: FERMILAB-PUB-23-385-AD-CSAID-PPD

Journal ref: Phys. Rev. Lett. 131, 161802 (2023)

20 T Dipole Magnet Based on Hybrid HTS/LTS Cos-Theta Coils with Stress Management

Authors: A. V. Zlobin, I. Noviski, E. Barzi, P. Ferracin

Abstract: This paper presents the design concept of the dipole magnet with 50 mm aperture, 20 T nominal field and 13% margin based on a six-layer cos-theta (CT) hybrid coil design. Due to the high stresses and strains in the coil at high field, Stress Management (SM) elements are implemented in the CT coil geometry. The results of magnet magnetic analysis are presented and discussed. The key parameters of t… ▽ More This paper presents the design concept of the dipole magnet with 50 mm aperture, 20 T nominal field and 13% margin based on a six-layer cos-theta (CT) hybrid coil design. Due to the high stresses and strains in the coil at high field, Stress Management (SM) elements are implemented in the CT coil geometry. The results of magnet magnetic analysis are presented and discussed. The key parameters of this design are compared with the parameters of similar magnets based on block-type and canted cos-theta coils. △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: 14th International Particle Accelerator Conference (IPAC'23)

Report number: FERMILAB-CONF-23-184-TD

Large-Aperture High-Field NB3SN Magnets for the 2nd EIC Interaction Region*

Authors: A. V. Zlobin, I. Novitski, E. Barzi, B. R. Gamage, A. Seryi

Abstract: The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with development and fabrication of large-aperture high-field magnets based on the Nb3Sn technology for the HL-LHC makes this technology interesting for the 2nd EIC IR. This… ▽ More The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with development and fabrication of large-aperture high-field magnets based on the Nb3Sn technology for the HL-LHC makes this technology interesting for the 2nd EIC IR. This paper summarizes the results of feasibility studies of large-aperture high-field Nb3Sn dipoles and quadrupoles for the 2nd EIC IR. △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: 14th International Particle Accelerator Conference (IPAC'23)

Report number: FERMILAB-CONF-23-164-TD

Design and Assembly of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management in Dipole Mirror Configuration

Authors: I. Novitski, A. V. Zlobin, E. Barzi, D. Turrioni

Abstract: The stress-management cos-theta (SMCT) coil is a new concept which has been proposed and is being developed at Fermilab in the framework of US Magnet Development Program (US-MDP) for high-field and/or large-aperture accelerator magnets based on low-temperature and high-temperature superconductors. The SMCT structure is used to reduce large coil deformations under the Lorentz forces and, thus, the… ▽ More The stress-management cos-theta (SMCT) coil is a new concept which has been proposed and is being developed at Fermilab in the framework of US Magnet Development Program (US-MDP) for high-field and/or large-aperture accelerator magnets based on low-temperature and high-temperature superconductors. The SMCT structure is used to reduce large coil deformations under the Lorentz forces and, thus, the excessively large strains and stresses in the coil. A large-aperture Nb3Sn SMCT dipole coil has been developed and fabricated at Fermilab to demonstrate and test the SMCT concept including coil design, fabrication technology and performance. The first SMCT coil has been assembled with 60-mm aperture Nb3Sn coil inside a dipole mirror configuration and will be tested separately and in series with the insert coil. This paper summarizes the large-aperture SMCT coil design and parameters and reports the coil fabrication steps and its assembly in dipole mirror configuration. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Report number: FERMILAB-CONF-23-074-TD

Towards a Muon Collider

Authors: Carlotta Accettura, Dean Adams, Rohit Agarwal, Claudia Ahdida, Chiara Aimè, Nicola Amapane, David Amorim, Paolo Andreetto, Fabio Anulli, Robert Appleby, Artur Apresyan, Aram Apyan, Sergey Arsenyev, Pouya Asadi, Mohammed Attia Mahmoud, Aleksandr Azatov, John Back, Lorenzo Balconi, Laura Bandiera, Roger Barlow, Nazar Bartosik, Emanuela Barzi, Fabian Batsch, Matteo Bauce, J. Scott Berg , et al. (272 additional authors not shown)

Abstract: A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi… ▽ More A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work. △ Less

Submitted 27 November, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: 118 pages, 103 figures

Conceptual design of 20 T hybrid accelerator dipole magnets

Authors: P. Ferracin, G. Ambrosio, M. Anerella, D. Arbelaez, L. Brouwer, E. Barzi, L. Cooley, J. Cozzolino, L. Garcia Fajardo, R. Gupta, M. Juchno, V. V. Kashikhin, F. Kurian, V. Marinozzi, I. Novitski, E. Rochepault, J. Stern, G. Vallone, B. Yahia, A. V. Zlobin

Abstract: Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High Temperature Superconducting (HTS) materials are used in the high field part of the coil with so-called insert coils, and Low Temperature Superconductors (LTS) like Nb3Sn and Nb-Ti superconductors are used in the lower fie… ▽ More Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High Temperature Superconducting (HTS) materials are used in the high field part of the coil with so-called insert coils, and Low Temperature Superconductors (LTS) like Nb3Sn and Nb-Ti superconductors are used in the lower field region with so-called outsert coils. The attractiveness of the hybrid option lays on the fact that, on the one hand, the 20 T field level is beyond the Nb3Sn practical limits of 15-16 T for accelerator magnets and can be achieved only via HTS materials; on the other hand, the high cost of HTS superconductors compared to LTS superconductors makes it advantageous exploring a hybrid approach, where the HTS portion of the coil is minimized. We present in this paper an overview of different design options aimed at generating 20 T field in a 50 mm clear aperture. The coil layouts investigated include the Cos-theta design (CT), with its variations to reduce the conductor peak stress, namely the Canted Cos-theta design (CCT) and the Stress Management Cos-theta design (SMCT), and, in addition, the Block-type design (BL) including a form of stress management and the Common-Coil design (CC). Results from a magnetic and mechanical analysis are discussed, with particular focus on the comparison between the different options regarding quantity of superconducting material, field quality, conductor peak stress, and quench protection. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Report number: FERMILAB-PUB-22-856-TD

How Community Agreements Can Improve Workplace Culture in Physics

Authors: Emanuela Barzi, Simonetta Liuti, Christine Nattrass, Roxanne Springer, Charles H. Bennett

Abstract: Equity, Diversity, and Inclusion (EDI) committees and Codes of Conduct (CoC) have become common in laboratories and physics departments across the country. However, very often these EDI committees and CoC are not equipped to provide practical consequences for violations, and therefore are mostly performative in nature. A considerable effort has been devoted by various groups within APS units and b… ▽ More Equity, Diversity, and Inclusion (EDI) committees and Codes of Conduct (CoC) have become common in laboratories and physics departments across the country. However, very often these EDI committees and CoC are not equipped to provide practical consequences for violations, and therefore are mostly performative in nature. A considerable effort has been devoted by various groups within APS units and beyond the APS in developing instead what are now called Community Guidelines. Community Guidelines help implement the core principles in CoC, by setting expectations for participation in in-person events and virtual communication. When further accompanied by accountability and enforcement processes, they develop into Community Agreements. This White Paper discusses the elements necessary to create and implement an effective Community Agreement, reviews examples of Community Agreements in physics, and argues that physics collaborations, physics departments, and ultimately as many physics organizations as possible, however large or small, should have a Community Agreement in place. We advocate that Community Agreements should become part of the bylaws of any entity that has bylaws. △ Less

Submitted 27 October, 2022; v1 submitted 14 September, 2022; originally announced September 2022.

Accelerators for Electroweak Physics and Higgs Boson Studies

Authors: A. Faus-Golfe, G. H. Hoffstaetter, Q. Qin, F. Zimmermann, T. Barklow, E. Barzi, S. Belomestnykh, M. Biagini, M. Chamizo Llatas, J. Gao, E. Gianfelice, B. List, V. Litvinenko, E. Nanni, T. Raubenheimer, T. Roser, T. Satogata, V. Shiltsev, S. Stapnes, V. Telnov

Abstract: We discuss the goals, the designs, the state of technical readiness, and the critical R&D needs of the accelerators that are currently under discussion as Higgs and electroweak factories. We also address the respective staging options enabling future energy-frontier colliders. The accelerators covered are based on many different techniques and approaches. They include several circular colliders, v… ▽ More We discuss the goals, the designs, the state of technical readiness, and the critical R&D needs of the accelerators that are currently under discussion as Higgs and electroweak factories. We also address the respective staging options enabling future energy-frontier colliders. The accelerators covered are based on many different techniques and approaches. They include several circular colliders, various linear colliders, colliders based on energy recovery linacs (ERLs), ERL-ring combinations, as well as gamma-gamma colliders. The linear colliders proposed consist of options for the International Linear Collider (ILC), for the Compact Linear Collider (CLIC), for the Cold Copper Collider (C^3), and for the more recent Higgs-Energy Lepton Collider (HELEN). ERLs are key components of the Recycling Linear e+e- Collider (ReLiC), of the Energy Recovery Linear Collider (ERLC), and of the Circular Energy Recovery Collider (CERC). Among the more conventional ring colliders, the following proposals are featured: the Future Circular Collider (FCC-ee), the Circular Electron Positron Collider (CEPC), the Electron Positron Circular Collider at Fermilab (EPCCF), and the Large Electron Positron collider $\#$3 (LEP-3). In addition, we consider the X-ray FEL based gamma-gamma Collider Higgs Factory (XCC) and the High-Energy High-Luminosity gamma-gamma collider (HE&HL gamma-gamma). Finally, a Higgs factory based on a circular muon collider is mentioned for completeness. △ Less

Submitted 20 November, 2022; v1 submitted 13 September, 2022; originally announced September 2022.

Comments: Submitted to Snowmass 2021

Muon Collider Forum Report

Authors: K. M. Black, S. Jindariani, D. Li, F. Maltoni, P. Meade, D. Stratakis, D. Acosta, R. Agarwal, K. Agashe, C. Aime, D. Ally, A. Apresyan, A. Apyan, P. Asadi, D. Athanasakos, Y. Bao, E. Barzi, N. Bartosik, L. A. T. Bauerdick, J. Beacham, S. Belomestnykh, J. S. Berg, J. Berryhill, A. Bertolin, P. C. Bhat , et al. (160 additional authors not shown)

Abstract: A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently availab… ▽ More A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently available technology. The topic generated a lot of excitement in Snowmass meetings and continues to attract a large number of supporters, including many from the early career community. In light of this very strong interest within the US particle physics community, Snowmass Energy, Theory and Accelerator Frontiers created a cross-frontier Muon Collider Forum in November of 2020. The Forum has been meeting on a monthly basis and organized several topical workshops dedicated to physics, accelerator technology, and detector R&D. Findings of the Forum are summarized in this report. △ Less

Submitted 8 August, 2023; v1 submitted 2 September, 2022; originally announced September 2022.

Towards 20 T Hybrid Accelerator Dipole Magnets

Authors: P. Ferracin, G. Ambrosio, D. Arbelaez, L. Brouwer, E. Barzi, L. Cooley, L. Garcia Fajardo, R. Gupta, M. Juchno, V. Kashikhin, V. Marinozzi, I. Novitski, E. Rochepault, J. Stern, A. Zlobin, N. Zucchi

Abstract: The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is considered to be 8-9 T. When Nb3Sn superconductor material is utilized, a field level of 15-16 T can be achieved. To further push the magnetic field beyond the Nb3Sn… ▽ More The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is considered to be 8-9 T. When Nb3Sn superconductor material is utilized, a field level of 15-16 T can be achieved. To further push the magnetic field beyond the Nb3Sn limits, High Temperature Superconductors (HTS) need to be considered in the magnet design. The most promising HTS materials for particle accelerator magnets are Bi2212 and REBCO. However, their outstanding performance comes with a significantly higher cost. Therefore, an economically viable option towards 20 T dipole magnets could consist in an hybrid solution, where both HTS and Nb3Sn materials are used. We discuss in this paper preliminary conceptual designs of various 20 T hybrid magnet concepts. After the definition of the overall design criteria, the coil dimensions and parameters are investigated with finite element models based on simple sector coils. Preliminary 2D cross-section computation results are then presented and three main layouts compared: cos-theta, block, and common-coil. Both traditional designs and more advanced stress-management options are considered. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:2203.13985

Report number: FERMILAB-PUB-22-221-TD

Minimum Quench Energy Of Nb$_3$Sn Wires With High Specific Heat Tape

Authors: E. Barzi, I. Novitsky, D. Turrioni, A. V. Zlobin, X. Peng, M. Tomsic

Abstract: A major problem of state-of-the-art Nb$_3$Sn accelerator magnets is their long training due to thermo-mechanical perturbations. Increasing the specific heat, $C_p$, of the Rutherford cable would reduce and/or eliminate training by limiting the coils temperature rise. This paper studies feasibility of increasing the $C_p$ of Rutherford-type cables by using thin composite Cu/$Gd_2$O$_3$ and Cu/… ▽ More A major problem of state-of-the-art Nb$_3$Sn accelerator magnets is their long training due to thermo-mechanical perturbations. Increasing the specific heat, $C_p$, of the Rutherford cable would reduce and/or eliminate training by limiting the coils temperature rise. This paper studies feasibility of increasing the $C_p$ of Rutherford-type cables by using thin composite Cu/$Gd_2$O$_3$ and Cu/$Gd_2$O$_2$S tapes produced by Hyper Tech Research, Inc. The tape can be either wrapped around the cable, placed on the cable wide faces under the insulation, and/or inserted as a core. Wire samples outfitted with these high-$C_p$ ribbons, or tapes, were prepared and tested at FNAL for their Minimum Quench Energy (MQE). At 90%I$_c$ and 15 T, the average gain of MQE of the Nb$_3$Sn wire soldered to the Cu/$Gd_2$O$_2$S 55 micrometer thick ribbon was 2.5, and further increased at larger transport currents. △ Less

Submitted 11 April, 2022; originally announced April 2022.

Report number: FERMILAB-PUB-22-133-TD

Development of a 120-mm Aperture Nb3Sn Dipole Coil with Stress Management

Authors: I. Novitski, A. V. Zlobin, J. Coghill, E. Barzi, D. Turrioni

Abstract: This paper describes a 120-mm aperture 2-layer dipole coil with stress management (SM) developed at Fermilab based on cos-theta coil geometry. A model of the coil support structure made of plastic was printed using additive manufacturing technology and used for practice coil winding. The real coil support structure was printed using the 316 stainless steel. The results of the SM structure size con… ▽ More This paper describes a 120-mm aperture 2-layer dipole coil with stress management (SM) developed at Fermilab based on cos-theta coil geometry. A model of the coil support structure made of plastic was printed using additive manufacturing technology and used for practice coil winding. The real coil support structure was printed using the 316 stainless steel. The results of the SM structure size control and the key coil fabrication steps are reported in the paper. The design of coil SM structure and the coil FEA in the dipole mirror test configurations are presented and discussed. △ Less

Submitted 11 April, 2022; originally announced April 2022.

Report number: FERMILAB-CONF-22-237-TD

Conductor Properties and Coil Technology for a Bi2212 Dipole Insert for 20 Tesla Hybrid Accelerator Magnets

Authors: Emanuela Barzi

Abstract: Developing HTS dipole inserts producing fields larger than 5 T within 15 T Nb3Sn outserts is necessary to generate 20 T or higher fields for future high energy colliders. Dipole inserts based on the cos-theta coil geometry with various stress management concepts and Bi2212 superconducting strand and cable are being developed at Fermilab both within and beyond the U.S.-MDP effort. The ultimate goal… ▽ More Developing HTS dipole inserts producing fields larger than 5 T within 15 T Nb3Sn outserts is necessary to generate 20 T or higher fields for future high energy colliders. Dipole inserts based on the cos-theta coil geometry with various stress management concepts and Bi2212 superconducting strand and cable are being developed at Fermilab both within and beyond the U.S.-MDP effort. The ultimate goal is to develop coil technology and an approach to manage azimuthal and radial strains of high temperature superconductor inserts when integrated within Nb3Sn outserts as a hybrid magnet system. This white paper reviews Bi2212 conductor properties and coil technologies, and proposes new ideas to face the challenges that Bi2212 still presents as an accelerator magnet conductor. △ Less

Submitted 26 October, 2022; v1 submitted 3 April, 2022; originally announced April 2022.

Comments: Contribution to Snowmass 2021. arXiv admin note: substantial text overlap with arXiv:2008.07403

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, D. Arbelaez, B. Auchmann, S. Balachandran, M. Baldini, A. Ballarino, S. Barua, E. Barzi, A. Baskys, C. Bird, J. Boerme, E. Bosque, L. Brouwer, S. Caspi, N. Cheggour, G. Chlachidze, L. Cooley, D. Davis, D. Dietderich, J. DiMarco, L. English, L. Garcia Fajardo , et al. (52 additional authors not shown)

Abstract: Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the domi… ▽ More Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility. △ Less

Submitted 26 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Critical problems of energy frontier Muon Colliders: optics, magnets and radiation

Authors: Yu. I. Alexahin, E. Barzi, E. Gianfelice-Wendt, V. Kapin, V. V. Kashikhin, N. V. Mokhov, I. Novitski, V. Shiltsev, S. Striganov, I. Tropin, A. V. Zlobin

Abstract: This White Paper brings together our previous studies on a Muon Collider (MC) and presents a design concept of the 6 TeV MC optics, the superconducting (SC) magnets, and a preliminary analysis of the protection system to reduce magnet radiation loads as well as particle backgrounds in the detector. The SC magnets and detector protection considerations impose strict limitations on the lattice choic… ▽ More This White Paper brings together our previous studies on a Muon Collider (MC) and presents a design concept of the 6 TeV MC optics, the superconducting (SC) magnets, and a preliminary analysis of the protection system to reduce magnet radiation loads as well as particle backgrounds in the detector. The SC magnets and detector protection considerations impose strict limitations on the lattice choice, hence the design of the collider optics, magnets and Machine Detector Interface (MDI) are closely intertwined. As a first approximation we use the Interaction Region (IR) design with beta-star=3 mm, whereas for the arcs we re-scale the arc cell design of the 3 TeV MC. Traditional cos-theta coil geometry and Nb3Sn superconductor were used to provide field maps for the analysis and optimization of the arc lattice and IR design, as well as for studies of beam dynamics and magnet protection against radiation. The stress management in the coil will be needed to avoid large degradation or even damage of the brittle SC coils. In the assumed IR designs, the dipoles close to the Interaction Point (IP) and tungsten masks in each IR (to protect magnets) help reducing background particle fluxes in the detector by a substantial factor. The tungsten nozzles in the 6 to 600 cm region from the IP, assisted by the detector solenoid field, trap most of the decay electrons created close to the IP as well as most of the incoherent electron-positron pairs generated in the IP. With sophisticated tungsten, iron, concrete and borated polyethylene shielding in the MDI region, the total reduction of background loads by more than three orders of magnitude can be achieved. △ Less

Submitted 19 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021. arXiv admin note: text overlap with arXiv:1204.6721

In Search of Excellence and Equity in Physics

Authors: Emanuela Barzi, S. James Gates, Jr., Roxanne Springer

Abstract: Equal opportunity is central to the concept of meritocracy. Opportunity and leadership should go to the people most qualified by performance, and not on the basis of arbitrary or irrelevant attributes. This principle is arguably most important for high-level leadership due to their outsized impact on the field. At the moment, many in the community perceive that the choice of leaders is infused wit… ▽ More Equal opportunity is central to the concept of meritocracy. Opportunity and leadership should go to the people most qualified by performance, and not on the basis of arbitrary or irrelevant attributes. This principle is arguably most important for high-level leadership due to their outsized impact on the field. At the moment, many in the community perceive that the choice of leaders is infused with a lack of meritocracy and too often driven by cronyism. This is possibly a reason why far worse underrepresentation persists than could be expected from a functioning meritocracy. If we want to change this, we need to change our behavior, i.e., practices. △ Less

Submitted 27 October, 2022; v1 submitted 19 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Report number: FERMILAB-PUB-22-135-TD

Journal ref: https://www.aps.org/programs/women/reports/gazette/upload/Spring22.pdf, 2022

An Impartial Perspective for Superconducting Nb3Sn coated Copper RF Cavities for Future Accelerators

Authors: E. Barzi, B. C. Barish, R. A. Rimmer, A. Valente-Feliciano, C. M. Rey, W. A. Barletta, E. Nanni, M. Nasr, M. Ross, M. Schneider, S. Tantawi, P. B. Welander, E. I. Simakov, I. O. Usov, L. Alff, N. Karabas, M. Major, J. P. Palakkal, S. Petzold, N. Pietralla, N. Schäfer, A. Kikuchi, H. Hayano, H. Ito, S. Kashiwaji , et al. (10 additional authors not shown)

Abstract: This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is un… ▽ More This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is unlikely that an ILC will be built in the next ten years with Nb as one of the main cost drivers of SRFs. This paper provides strong arguments on the benefits of using this time for R&D on producing Nb3Sn on inexpensive and thermally efficient metals such as Cu or bronze, while pursuing in parallel the novel U.S. concept of parallel-feed RF accelerator structures. A technology that synergistically uses both of these advanced tools would make an ILC or equivalent machines more affordable and more likely to be built. Such a successful enterprise would readily apply to other HEP accelerators, for instance a Muon Collider, and to accelerators beyond HEP. We present and assess current efforts in the U.S. on the novel concept of parallel-feed RF accelerator structures, and in the U.S. and abroad in producing Nb3Sn films on either Cu or bronze despite minimal funding. △ Less

Submitted 26 March, 2022; v1 submitted 17 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Report number: FERMILAB-CONF-22-134-TD

The Necessity of International Particle Physics Opportunities for American Education

Authors: Enrique Arce-Larreta, Ketevi Assamagan, Emanuela Barzi, Uta Bilow, Kenneth Cecire, Sijbrand de Jong, Simone Donati, Steven Goldfarb, Joel Klammer, Azwinndini Muronga, Maria Niland

Abstract: This Snowmass2021 Contributed Paper addresses the role of the Particle Physics community in creating and fostering international connections in American education. It describes the pressing need to introduce students and faculty to the challenges and rewards of international collaboration, not only to develop the next generation of scientists and engineers for particle physics, but to maintain and… ▽ More This Snowmass2021 Contributed Paper addresses the role of the Particle Physics community in creating and fostering international connections in American education. It describes the pressing need to introduce students and faculty to the challenges and rewards of international collaboration, not only to develop the next generation of scientists and engineers for particle physics, but to maintain and build U.S. leadership on an increasingly competitive world stage. We present and assess current efforts in education and public engagement with an eye toward identifying those activities in need of change or increased resources to improve audience reach and program efficacy. We also consider possible new activities that might improve upon or complement existing programs, with the common goal of providing all U.S. students with the opportunity to benefit from a quality international scientific experience. △ Less

Submitted 29 March, 2022; v1 submitted 17 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Advancing Superconducting Magnet Diagnostics for Future Colliders

Authors: M. Marchevsky, R. Teyber, G. S. Lee, M. Turqueti, M. Baldini, E. Barzi, J. DiMarco, S. Krave, V. Marinozzi, S. Stoynev, P. Joshi, J. Muratore, D. Davis

Abstract: Future colliders will operate at increasingly high magnetic fields pushing limits of electromagnetic and mechanical stress on the conductor [1]. Understanding factors affecting superconducting (SC) magnet performance in challenging conditions of high mechanical stress and cryogenic temperatures is only possible with the use of advanced magnet diagnostics. Diagnostics provide a unique observation w… ▽ More Future colliders will operate at increasingly high magnetic fields pushing limits of electromagnetic and mechanical stress on the conductor [1]. Understanding factors affecting superconducting (SC) magnet performance in challenging conditions of high mechanical stress and cryogenic temperatures is only possible with the use of advanced magnet diagnostics. Diagnostics provide a unique observation window into mechanical and electromagnetic processes associated with magnet operation, and give essential feedback to magnet design, simulations and material research activities. Development of novel diagnostic capabilities is therefore an integral part of next-generation magnet development. In this paper, we summarize diagnostics development needs from a prospective of the US Magnet Development Program (MDP), and define main research directions that could shape this field in the near future. △ Less

Submitted 16 March, 2022; originally announced March 2022.

Comments: 13 pages, 7 figures Contribution to Snowmass 2021

High Energy & High Luminosity $γγ$ Colliders

Authors: Emanuela Barzi, Barry C. Barish, William A. Barletta, Ilya F. Ginzburg, Simone Di Mitri

Abstract: With the best of modern standard lasers, high-energy $γγ$ colliders from electron beams of E larger than 250 GeV are only possible at the expense of photon luminosity, i.e. 10 times lower than for photon colliders at c.m. energies below 0.5 TeV. For existing state-of-the art lasers, an optimistic upper energy limit for x=4.8 is an electron beam of less than 250 GeV. This Snowmass21 Contributed Pap… ▽ More With the best of modern standard lasers, high-energy $γγ$ colliders from electron beams of E larger than 250 GeV are only possible at the expense of photon luminosity, i.e. 10 times lower than for photon colliders at c.m. energies below 0.5 TeV. For existing state-of-the art lasers, an optimistic upper energy limit for x=4.8 is an electron beam of less than 250 GeV. This Snowmass21 Contributed Paper shows how Free Electron Lasers (FEL) pave the way for High Energy & High Luminosity $γγ$ colliders. We present and assess a conceptual design study of a FEL with wavelength of 2.4 $μ$m and an x-factor in the range of 2 to 40, to maximize the luminosity of a $γγ$ collider as second interaction region of 0.5 TeV to 10 TeV c.m. $e^+e^-$ colliders. △ Less

Submitted 26 October, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Report number: FERMILAB-CONF-22-245-TD

A Muon Collider Facility for Physics Discovery

Authors: D. Stratakis, N. Mokhov, M. Palmer, N. Pastrone, T. Raubenheimer, C. Rogers, D. Schulte, V. Shiltsev, J. Tang, A. Yamamoto, C. Aimè, M. A. Mahmoud, N. Bartosik, E. Barzi, A. Bersani, A. Bertolin, M. Bonesini, B. Caiffi, M. Casarsa, M. G. Catanesi, A. Cerri, C. Curatolo, M. Dam, H. Damerau, E. De Matteis , et al. (44 additional authors not shown)

Abstract: Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this conte… ▽ More Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this context, a new international collaboration has formed to further extend the design concepts and performance studies of such a machine. This effort is focused on delivering the elements of a $\sim$10 TeV center of mass (CM) energy design to explore the physics energy frontier. The path to such a machine may pass through lower energy options. Currently a 3 TeV CM stage is considered. Other energy stages could also be explored, e.g. an s-channel Higgs Factory operating at 125 GeV CM. We describe the status of the R&D and design effort towards such a machine and lay out a plan to bring these concepts to maturity as a tool for the high energy physics community. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: 23 pages, 3 figures. arXiv admin note: text overlap with arXiv:2201.07895

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

Promising Technologies and R&D Directions for the Future Muon Collider Detectors

Authors: Sergo Jindariani, Federico Meloni, Nadia Pastrone, Chiara Aimè, Nazar Bartosik, Emanuela Barzi, Alessandro Bertolin, Alessandro Braghieri, Laura Buonincontri, Simone Calzaferri, Massimo Casarsa, Maria Gabriella Catanesi, Alessandro Cerri, Grigorios Chachamis, Anna Colaleo, Camilla Curatolo, Giacomo Da Molin, Jean-Pierre Delahaye, Biagio Di Micco, Tommaso Dorigo, Filippo Errico, Davide Fiorina, Alessio Gianelle, Carlo Giraldin, John Hauptman , et al. (36 additional authors not shown)

Abstract: Among the post-LHC generation of particle accelerators, the muon collider represents a unique machine with capability to provide very high energy leptonic collisions and to open the path to a vast and mostly unexplored physics programme. However, on the experimental side, such great physics potential is accompanied by unprecedented technological challenges, due to the fact that muons are unstable… ▽ More Among the post-LHC generation of particle accelerators, the muon collider represents a unique machine with capability to provide very high energy leptonic collisions and to open the path to a vast and mostly unexplored physics programme. However, on the experimental side, such great physics potential is accompanied by unprecedented technological challenges, due to the fact that muons are unstable particles. Their decay products interact with the machine elements and produce an intense flux of background particles that eventually reach the detector and may degrade its performance. In this paper, we present technologies that have a potential to match the challenging specifications of a muon collider detector and outline a path forward for the future R&D efforts. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021, 27 pages, 15 figures

MDPCT1 quench data and performance analysis

Authors: Stoyan Emilov Stoynev, Maria Baldini, Emanuela Z. Barzi, Gouram Chlachidze, Vadim V. Kashikhin, Steven T. Krave, Igor Novitski, Daniele Turrioni, Alexander V. Zlobin

Abstract: MDPCT1 is a four-layer cos-theta Nb3Sn dipole demonstrator developed and tested at FNAL in the framework of the U.S. Magnet Development Program. The magnet reached record fields for accelerator magnets of 14.1 T at 4.5 K in the first test and 14.5 T at 1.9 K in the second test and then showed large degradation. While its inner coils performed exceptionally well with only two quenches up to 14.5 T… ▽ More MDPCT1 is a four-layer cos-theta Nb3Sn dipole demonstrator developed and tested at FNAL in the framework of the U.S. Magnet Development Program. The magnet reached record fields for accelerator magnets of 14.1 T at 4.5 K in the first test and 14.5 T at 1.9 K in the second test and then showed large degradation. While its inner coils performed exceptionally well with only two quenches up to 14.5 T and no evidence of degradation, the outer coils degraded over the course of testing. By adopting new measurement and analysis techniques at FNAL we are discussing in detail what happened. Both success and failure in our diagnostics are discussed. The evolution of techniques over the course of two tests (and three thermal cycles) shows the path to address challenges brought by the first four-layer magnet tested at FNAL. This paper presents the analysis of quench data along with diagnostic features and complementary measurements taken in support of the magnet performance analysis. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Report number: FERMILAB-CONF-21-638-TD

Measurement of the Positive Muon Anomalous Magnetic Moment to 0.46 ppm

Authors: B. Abi, T. Albahri, S. Al-Kilani, D. Allspach, L. P. Alonzi, A. Anastasi, A. Anisenkov, F. Azfar, K. Badgley, S. Baeßler, I. Bailey, V. A. Baranov, E. Barlas-Yucel, T. Barrett, E. Barzi, A. Basti, F. Bedeschi, A. Behnke, M. Berz, M. Bhattacharya, H. P. Binney, R. Bjorkquist, P. Bloom, J. Bono, E. Bottalico , et al. (212 additional authors not shown)

Abstract: We present the first results of the Fermilab Muon g-2 Experiment for the positive muon magnetic anomaly $a_μ\equiv (g_μ-2)/2$. The anomaly is determined from the precision measurements of two angular frequencies. Intensity variation of high-energy positrons from muon decays directly encodes the difference frequency $ω_a$ between the spin-precession and cyclotron frequencies for polarized muons in… ▽ More We present the first results of the Fermilab Muon g-2 Experiment for the positive muon magnetic anomaly $a_μ\equiv (g_μ-2)/2$. The anomaly is determined from the precision measurements of two angular frequencies. Intensity variation of high-energy positrons from muon decays directly encodes the difference frequency $ω_a$ between the spin-precession and cyclotron frequencies for polarized muons in a magnetic storage ring. The storage ring magnetic field is measured using nuclear magnetic resonance probes calibrated in terms of the equivalent proton spin precession frequency ${\tildeω'^{}_p}$ in a spherical water sample at 34.7$^{\circ}$C. The ratio $ω_a / {\tildeω'^{}_p}$, together with known fundamental constants, determines $a_μ({\rm FNAL}) = 116\,592\,040(54)\times 10^{-11}$ (0.46\,ppm). The result is 3.3 standard deviations greater than the standard model prediction and is in excellent agreement with the previous Brookhaven National Laboratory (BNL) E821 measurement. After combination with previous measurements of both $μ^+$ and $μ^-$, the new experimental average of $a_μ({\rm Exp}) = 116\,592\,061(41)\times 10^{-11}$ (0.35\,ppm) increases the tension between experiment and theory to 4.2 standard deviations △ Less

Submitted 7 April, 2021; originally announced April 2021.

Comments: 10 pages; 4 figures

Report number: FERMILAB-PUB-21-132-E

Journal ref: Phys. Rev. Lett. 126, 141801 (2021)

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Authors: Alexander V Zlobin, Igor Novitski, Emanuela Barzi

Abstract: The U.S. Magnet Development Program (US-MDP) is aimed at developing high field accelerator magnets with magnetic fields beyond the limits of Nb$_3$Sn technology. Recent progress with composite wires and Rutherford cables based on the first generation high temperature superconductor Bi$_2$Sr$_2$CaCu$_2$O$_8$ (Bi2212) allows considering them for this purpose. However, Bi2212 wires and cables are sen… ▽ More The U.S. Magnet Development Program (US-MDP) is aimed at developing high field accelerator magnets with magnetic fields beyond the limits of Nb$_3$Sn technology. Recent progress with composite wires and Rutherford cables based on the first generation high temperature superconductor Bi$_2$Sr$_2$CaCu$_2$O$_8$ (Bi2212) allows considering them for this purpose. However, Bi2212 wires and cables are sensitive to transverse stresses and strains, which are large in high-field accelerator magnets. This requires magnet designs with stress management concepts to manage azimuthal and radial strains in the coil windings and prevent degradation of the current carrying capability of Bi2212 conductor or even its permanent damage. This paper describes a novel stress management approach, which was developed at Fermilab for high-field large-aperture Nb$_3$Sn accelerator magnets, and is now being applied to high-field dipole inserts based on Bi2212 Rutherford cable. The insert conceptual design and main parameters, including the superconducting wire and cable, as well as the coil stress management structure, key technological steps and approaches, test configurations and their target parameters are presented and discussed. △ Less

Submitted 17 August, 2020; originally announced August 2020.

Report number: FERMILAB-PUB-20-425-TD

Heat Diffusion in high-$C_p$ Nb$_3$Sn Composite Superconducting Wires

Authors: E. Barzi, F. Berritta, D. Turrioni, A. V. Zlobin

Abstract: A major focus of Nb$_3$Sn accelerator magnets is on significantly reducing or eliminating their training. Demonstration of an approach to increase the $C_p$ of Nb$_3$Sn magnets using new materials and technologies is very important both for particle accelerators and light sources. It would improve thermal stability and lead to much shorter magnet training, with substantial savings in machines' com… ▽ More A major focus of Nb$_3$Sn accelerator magnets is on significantly reducing or eliminating their training. Demonstration of an approach to increase the $C_p$ of Nb$_3$Sn magnets using new materials and technologies is very important both for particle accelerators and light sources. It would improve thermal stability and lead to much shorter magnet training, with substantial savings in machines' commissioning costs. Both Hypertech and Bruker-OST have attempted to introduce high-$C_p$ elements in their wire design. This paper includes a description of these advanced wires, the finite element model of their heat diffusion properties as compared with the standard wires, and whenever available, a comparison between the minimum quench energy (MQE) calculated by the model and actual MQE measurements on wires. △ Less

Submitted 17 August, 2020; v1 submitted 2 June, 2020; originally announced June 2020.

Report number: FERMILAB-PUB-20-225-TD

The Italian Summer Students Program at Fermi National Accelerator Laboratory and other US Laboratories

Authors: Carmela Luongo, Emanuela Barzi, Giorgio Bellettini, Simone Donati

Abstract: Since 1984 INFN scientists performing experiments at Fermilab have been running a two month summer training program for Italian students at the lab. In 1984 the program involved only a few physics students from the Pisa group, but it was later extended to other groups and to engineering students. Since 2004 the program has been supported in part by DOE in the frame of an exchange agreement with IN… ▽ More Since 1984 INFN scientists performing experiments at Fermilab have been running a two month summer training program for Italian students at the lab. In 1984 the program involved only a few physics students from the Pisa group, but it was later extended to other groups and to engineering students. Since 2004 the program has been supported in part by DOE in the frame of an exchange agreement with INFN. The Fermilab training programs spanned from data analysis to design and construction of particle detectors and accelerator components, research on superconductive elements, theory of accelerators, and analysis of astrophysical data. At the other US laboratories the offered training was on Space Science. △ Less

Submitted 5 August, 2019; originally announced August 2019.

Comments: Proceedings of the XXXIX International Conference on High Energy Physics, July 4-11, 2018, Seoul (Korea)

The Science Training Program for Young Italian Physicists and Engineers at Fermilab

Authors: Emanuela Barzi, Giorgio Bellettini, Simone Donati, Carmela Luongo

Abstract: The summer training program for Italian undergraduate and graduate students at the Department of Energy (DOE) laboratory of Fermilab (Batavia, Illinois, USA) started in 1984 as a 2 month training program for Italian undergraduate students in physics of the Istituto Nazionale di Fisica Nucleare (INFN) collaborating in the Collider Detector experiment (CDF) at the Fermilab Tevatron proton - antiprot… ▽ More The summer training program for Italian undergraduate and graduate students at the Department of Energy (DOE) laboratory of Fermilab (Batavia, Illinois, USA) started in 1984 as a 2 month training program for Italian undergraduate students in physics of the Istituto Nazionale di Fisica Nucleare (INFN) collaborating in the Collider Detector experiment (CDF) at the Fermilab Tevatron proton - antiproton collider. While in 1984 the program involved only 4 physics students from the University of Pisa, in the following years it rapidly grew in scope and size under the management of the Cultural Association of Italians at Fermilab (CAIF). With an average number of 30 trainees/year reached in the last few years, the total number of Italian students hosted at Fermilab since 1984 has exceeded 500 units. Since 2015 the program has been included in the portfolio of the summer courses of the University of Pisa, which acknowledges 6 ECTS to the interns. △ Less

Submitted 5 August, 2019; originally announced August 2019.

Comments: Presented at the 12th International Conference on Education and Development INTED 2018, March 5-7, 2018, Valencia (Spain)

Muon (g-2) Technical Design Report

Authors: J. Grange, V. Guarino, P. Winter, K. Wood, H. Zhao, R. M. Carey, D. Gastler, E. Hazen, N. Kinnaird, J. P. Miller, J. Mott, B. L. Roberts, J. Benante, J. Crnkovic, W. M. Morse, H. Sayed, V. Tishchenko, V. P. Druzhinin, B. I. Khazin, I. A. Koop, I. Logashenko, Y. M. Shatunov, E. Solodov, M. Korostelev, D. Newton , et al. (176 additional authors not shown)

Abstract: The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous magnetic moment a factor-of-four more precisely than was done in E821 at the Brookhaven National Laboratory AGS. The E821 result appears to be greater than the Standard-Model prediction by more than three standard deviations. When combined with expected improvement in the Standard-Model hadronic contributions, E989 should… ▽ More The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous magnetic moment a factor-of-four more precisely than was done in E821 at the Brookhaven National Laboratory AGS. The E821 result appears to be greater than the Standard-Model prediction by more than three standard deviations. When combined with expected improvement in the Standard-Model hadronic contributions, E989 should be able to determine definitively whether or not the E821 result is evidence for physics beyond the Standard Model. After a review of the physics motivation and the basic technique, which will use the muon storage ring built at BNL and now relocated to Fermilab, the design of the new experiment is presented. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2/3 approval. △ Less

Submitted 11 May, 2018; v1 submitted 27 January, 2015; originally announced January 2015.

Comments: 666 pages

Report number: FERMILAB-FN-0992-E